Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 304 insertions, 0 deletions

diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
new file mode 100644
index 000000000..4e3d3d5f6
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Samsung SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <video/of_display_timing.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#include <drm/bridge/analogix_dp.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <drm/exynos_drm.h>
+
+#include "exynos_drm_crtc.h"
+
+#define to_dp(nm)	container_of(nm, struct exynos_dp_device, nm)
+
+struct exynos_dp_device {
+	struct drm_encoder         encoder;
+	struct drm_connector       *connector;
+	struct drm_bridge          *ptn_bridge;
+	struct drm_device          *drm_dev;
+	struct device              *dev;
+
+	struct videomode           vm;
+	struct analogix_dp_device *adp;
+	struct analogix_dp_plat_data plat_data;
+};
+
+static int exynos_dp_crtc_clock_enable(struct analogix_dp_plat_data *plat_data,
+				bool enable)
+{
+	struct exynos_dp_device *dp = to_dp(plat_data);
+	struct drm_encoder *encoder = &dp->encoder;
+
+	if (!encoder->crtc)
+		return -EPERM;
+
+	exynos_drm_pipe_clk_enable(to_exynos_crtc(encoder->crtc), enable);
+
+	return 0;
+}
+
+static int exynos_dp_poweron(struct analogix_dp_plat_data *plat_data)
+{
+	return exynos_dp_crtc_clock_enable(plat_data, true);
+}
+
+static int exynos_dp_poweroff(struct analogix_dp_plat_data *plat_data)
+{
+	return exynos_dp_crtc_clock_enable(plat_data, false);
+}
+
+static int exynos_dp_get_modes(struct analogix_dp_plat_data *plat_data,
+			       struct drm_connector *connector)
+{
+	struct exynos_dp_device *dp = to_dp(plat_data);
+	struct drm_display_mode *mode;
+	int num_modes = 0;
+
+	if (dp->plat_data.panel)
+		return num_modes;
+
+	mode = drm_mode_create(connector->dev);
+	if (!mode) {
+		DRM_DEV_ERROR(dp->dev,
+			      "failed to create a new display mode.\n");
+		return num_modes;
+	}
+
+	drm_display_mode_from_videomode(&dp->vm, mode);
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_set_name(mode);
+	drm_mode_probed_add(connector, mode);
+
+	return num_modes + 1;
+}
+
+static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data,
+				   struct drm_bridge *bridge,
+				   struct drm_connector *connector)
+{
+	struct exynos_dp_device *dp = to_dp(plat_data);
+	int ret;
+
+	dp->connector = connector;
+
+	/* Pre-empt DP connector creation if there's a bridge */
+	if (dp->ptn_bridge) {
+		ret = drm_bridge_attach(&dp->encoder, dp->ptn_bridge, bridge,
+					0);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void exynos_dp_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+}
+
+static void exynos_dp_nop(struct drm_encoder *encoder)
+{
+	/* do nothing */
+}
+
+static const struct drm_encoder_helper_funcs exynos_dp_encoder_helper_funcs = {
+	.mode_set = exynos_dp_mode_set,
+	.enable = exynos_dp_nop,
+	.disable = exynos_dp_nop,
+};
+
+static int exynos_dp_dt_parse_panel(struct exynos_dp_device *dp)
+{
+	int ret;
+
+	ret = of_get_videomode(dp->dev->of_node, &dp->vm, OF_USE_NATIVE_MODE);
+	if (ret) {
+		DRM_DEV_ERROR(dp->dev,
+			      "failed: of_get_videomode() : %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
+{
+	struct exynos_dp_device *dp = dev_get_drvdata(dev);
+	struct drm_encoder *encoder = &dp->encoder;
+	struct drm_device *drm_dev = data;
+	int ret;
+
+	dp->drm_dev = drm_dev;
+
+	if (!dp->plat_data.panel && !dp->ptn_bridge) {
+		ret = exynos_dp_dt_parse_panel(dp);
+		if (ret)
+			return ret;
+	}
+
+	drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_TMDS);
+
+	drm_encoder_helper_add(encoder, &exynos_dp_encoder_helper_funcs);
+
+	ret = exynos_drm_set_possible_crtcs(encoder, EXYNOS_DISPLAY_TYPE_LCD);
+	if (ret < 0)
+		return ret;
+
+	dp->plat_data.encoder = encoder;
+
+	ret = analogix_dp_bind(dp->adp, dp->drm_dev);
+	if (ret)
+		dp->encoder.funcs->destroy(&dp->encoder);
+
+	return ret;
+}
+
+static void exynos_dp_unbind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct exynos_dp_device *dp = dev_get_drvdata(dev);
+
+	analogix_dp_unbind(dp->adp);
+	dp->encoder.funcs->destroy(&dp->encoder);
+}
+
+static const struct component_ops exynos_dp_ops = {
+	.bind	= exynos_dp_bind,
+	.unbind	= exynos_dp_unbind,
+};
+
+static int exynos_dp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np;
+	struct exynos_dp_device *dp;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+	int ret;
+
+	dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
+			  GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
+	dp->dev = dev;
+	/*
+	 * We just use the drvdata until driver run into component
+	 * add function, and then we would set drvdata to null, so
+	 * that analogix dp driver would take charge of the drvdata.
+	 */
+	platform_set_drvdata(pdev, dp);
+
+	/* This is for the backward compatibility. */
+	np = of_parse_phandle(dev->of_node, "panel", 0);
+	if (np) {
+		dp->plat_data.panel = of_drm_find_panel(np);
+
+		of_node_put(np);
+		if (IS_ERR(dp->plat_data.panel))
+			return PTR_ERR(dp->plat_data.panel);
+
+		goto out;
+	}
+
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, &bridge);
+	if (ret)
+		return ret;
+
+	/* The remote port can be either a panel or a bridge */
+	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = EXYNOS_DP;
+	dp->plat_data.power_on_start = exynos_dp_poweron;
+	dp->plat_data.power_off = exynos_dp_poweroff;
+	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.get_modes = exynos_dp_get_modes;
+	dp->plat_data.skip_connector = !!bridge;
+
+	dp->ptn_bridge = bridge;
+
+out:
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
+	return component_add(&pdev->dev, &exynos_dp_ops);
+}
+
+static int exynos_dp_remove(struct platform_device *pdev)
+{
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
+	component_del(&pdev->dev, &exynos_dp_ops);
+	analogix_dp_remove(dp->adp);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int exynos_dp_suspend(struct device *dev)
+{
+	struct exynos_dp_device *dp = dev_get_drvdata(dev);
+
+	return analogix_dp_suspend(dp->adp);
+}
+
+static int exynos_dp_resume(struct device *dev)
+{
+	struct exynos_dp_device *dp = dev_get_drvdata(dev);
+
+	return analogix_dp_resume(dp->adp);
+}
+#endif
+
+static const struct dev_pm_ops exynos_dp_pm_ops = {
+	SET_RUNTIME_PM_OPS(exynos_dp_suspend, exynos_dp_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+};
+
+static const struct of_device_id exynos_dp_match[] = {
+	{ .compatible = "samsung,exynos5-dp" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_dp_match);
+
+struct platform_driver dp_driver = {
+	.probe		= exynos_dp_probe,
+	.remove		= exynos_dp_remove,
+	.driver		= {
+		.name	= "exynos-dp",
+		.owner	= THIS_MODULE,
+		.pm	= &exynos_dp_pm_ops,
+		.of_match_table = exynos_dp_match,
+	},
+};
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Samsung Specific Analogix-DP Driver Extension");
+MODULE_LICENSE("GPL v2");