Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 469 insertions, 0 deletions

diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c
new file mode 100644
index 000000000..dec7df35b
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Authors:
+ *	YoungJun Cho <yj44.cho@samsung.com>
+ *	Eunchul Kim <chulspro.kim@samsung.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sizes.h>
+
+#include <drm/drm_fourcc.h>
+#include <drm/exynos_drm.h>
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_ipp.h"
+#include "regs-rotator.h"
+
+/*
+ * Rotator supports image crop/rotator and input/output DMA operations.
+ * input DMA reads image data from the memory.
+ * output DMA writes image data to memory.
+ */
+
+#define ROTATOR_AUTOSUSPEND_DELAY	2000
+
+#define rot_read(offset)	readl(rot->regs + (offset))
+#define rot_write(cfg, offset)	writel(cfg, rot->regs + (offset))
+
+enum rot_irq_status {
+	ROT_IRQ_STATUS_COMPLETE	= 8,
+	ROT_IRQ_STATUS_ILLEGAL	= 9,
+};
+
+struct rot_variant {
+	const struct exynos_drm_ipp_formats *formats;
+	unsigned int	num_formats;
+};
+
+/*
+ * A structure of rotator context.
+ * @ippdrv: prepare initialization using ippdrv.
+ * @regs: memory mapped io registers.
+ * @clock: rotator gate clock.
+ * @limit_tbl: limitation of rotator.
+ * @irq: irq number.
+ */
+struct rot_context {
+	struct exynos_drm_ipp ipp;
+	struct drm_device *drm_dev;
+	void		*dma_priv;
+	struct device	*dev;
+	void __iomem	*regs;
+	struct clk	*clock;
+	const struct exynos_drm_ipp_formats *formats;
+	unsigned int	num_formats;
+	struct exynos_drm_ipp_task	*task;
+};
+
+static void rotator_reg_set_irq(struct rot_context *rot, bool enable)
+{
+	u32 val = rot_read(ROT_CONFIG);
+
+	if (enable == true)
+		val |= ROT_CONFIG_IRQ;
+	else
+		val &= ~ROT_CONFIG_IRQ;
+
+	rot_write(val, ROT_CONFIG);
+}
+
+static enum rot_irq_status rotator_reg_get_irq_status(struct rot_context *rot)
+{
+	u32 val = rot_read(ROT_STATUS);
+
+	val = ROT_STATUS_IRQ(val);
+
+	if (val == ROT_STATUS_IRQ_VAL_COMPLETE)
+		return ROT_IRQ_STATUS_COMPLETE;
+
+	return ROT_IRQ_STATUS_ILLEGAL;
+}
+
+static irqreturn_t rotator_irq_handler(int irq, void *arg)
+{
+	struct rot_context *rot = arg;
+	enum rot_irq_status irq_status;
+	u32 val;
+
+	/* Get execution result */
+	irq_status = rotator_reg_get_irq_status(rot);
+
+	/* clear status */
+	val = rot_read(ROT_STATUS);
+	val |= ROT_STATUS_IRQ_PENDING((u32)irq_status);
+	rot_write(val, ROT_STATUS);
+
+	if (rot->task) {
+		struct exynos_drm_ipp_task *task = rot->task;
+
+		rot->task = NULL;
+		pm_runtime_mark_last_busy(rot->dev);
+		pm_runtime_put_autosuspend(rot->dev);
+		exynos_drm_ipp_task_done(task,
+			irq_status == ROT_IRQ_STATUS_COMPLETE ? 0 : -EINVAL);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void rotator_src_set_fmt(struct rot_context *rot, u32 fmt)
+{
+	u32 val;
+
+	val = rot_read(ROT_CONTROL);
+	val &= ~ROT_CONTROL_FMT_MASK;
+
+	switch (fmt) {
+	case DRM_FORMAT_NV12:
+		val |= ROT_CONTROL_FMT_YCBCR420_2P;
+		break;
+	case DRM_FORMAT_XRGB8888:
+		val |= ROT_CONTROL_FMT_RGB888;
+		break;
+	}
+
+	rot_write(val, ROT_CONTROL);
+}
+
+static void rotator_src_set_buf(struct rot_context *rot,
+				struct exynos_drm_ipp_buffer *buf)
+{
+	u32 val;
+
+	/* Set buffer size configuration */
+	val = ROT_SET_BUF_SIZE_H(buf->buf.height) |
+	      ROT_SET_BUF_SIZE_W(buf->buf.pitch[0] / buf->format->cpp[0]);
+	rot_write(val, ROT_SRC_BUF_SIZE);
+
+	/* Set crop image position configuration */
+	val = ROT_CROP_POS_Y(buf->rect.y) | ROT_CROP_POS_X(buf->rect.x);
+	rot_write(val, ROT_SRC_CROP_POS);
+	val = ROT_SRC_CROP_SIZE_H(buf->rect.h) |
+	      ROT_SRC_CROP_SIZE_W(buf->rect.w);
+	rot_write(val, ROT_SRC_CROP_SIZE);
+
+	/* Set buffer DMA address */
+	rot_write(buf->dma_addr[0], ROT_SRC_BUF_ADDR(0));
+	rot_write(buf->dma_addr[1], ROT_SRC_BUF_ADDR(1));
+}
+
+static void rotator_dst_set_transf(struct rot_context *rot,
+				   unsigned int rotation)
+{
+	u32 val;
+
+	/* Set transform configuration */
+	val = rot_read(ROT_CONTROL);
+	val &= ~ROT_CONTROL_FLIP_MASK;
+
+	if (rotation & DRM_MODE_REFLECT_X)
+		val |= ROT_CONTROL_FLIP_VERTICAL;
+	if (rotation & DRM_MODE_REFLECT_Y)
+		val |= ROT_CONTROL_FLIP_HORIZONTAL;
+
+	val &= ~ROT_CONTROL_ROT_MASK;
+
+	if (rotation & DRM_MODE_ROTATE_90)
+		val |= ROT_CONTROL_ROT_90;
+	else if (rotation & DRM_MODE_ROTATE_180)
+		val |= ROT_CONTROL_ROT_180;
+	else if (rotation & DRM_MODE_ROTATE_270)
+		val |= ROT_CONTROL_ROT_270;
+
+	rot_write(val, ROT_CONTROL);
+}
+
+static void rotator_dst_set_buf(struct rot_context *rot,
+				struct exynos_drm_ipp_buffer *buf)
+{
+	u32 val;
+
+	/* Set buffer size configuration */
+	val = ROT_SET_BUF_SIZE_H(buf->buf.height) |
+	      ROT_SET_BUF_SIZE_W(buf->buf.pitch[0] / buf->format->cpp[0]);
+	rot_write(val, ROT_DST_BUF_SIZE);
+
+	/* Set crop image position configuration */
+	val = ROT_CROP_POS_Y(buf->rect.y) | ROT_CROP_POS_X(buf->rect.x);
+	rot_write(val, ROT_DST_CROP_POS);
+
+	/* Set buffer DMA address */
+	rot_write(buf->dma_addr[0], ROT_DST_BUF_ADDR(0));
+	rot_write(buf->dma_addr[1], ROT_DST_BUF_ADDR(1));
+}
+
+static void rotator_start(struct rot_context *rot)
+{
+	u32 val;
+
+	/* Set interrupt enable */
+	rotator_reg_set_irq(rot, true);
+
+	val = rot_read(ROT_CONTROL);
+	val |= ROT_CONTROL_START;
+	rot_write(val, ROT_CONTROL);
+}
+
+static int rotator_commit(struct exynos_drm_ipp *ipp,
+			  struct exynos_drm_ipp_task *task)
+{
+	struct rot_context *rot =
+			container_of(ipp, struct rot_context, ipp);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(rot->dev);
+	if (ret < 0) {
+		dev_err(rot->dev, "failed to enable ROTATOR device.\n");
+		return ret;
+	}
+	rot->task = task;
+
+	rotator_src_set_fmt(rot, task->src.buf.fourcc);
+	rotator_src_set_buf(rot, &task->src);
+	rotator_dst_set_transf(rot, task->transform.rotation);
+	rotator_dst_set_buf(rot, &task->dst);
+	rotator_start(rot);
+
+	return 0;
+}
+
+static const struct exynos_drm_ipp_funcs ipp_funcs = {
+	.commit = rotator_commit,
+};
+
+static int rotator_bind(struct device *dev, struct device *master, void *data)
+{
+	struct rot_context *rot = dev_get_drvdata(dev);
+	struct drm_device *drm_dev = data;
+	struct exynos_drm_ipp *ipp = &rot->ipp;
+
+	rot->drm_dev = drm_dev;
+	ipp->drm_dev = drm_dev;
+	exynos_drm_register_dma(drm_dev, dev, &rot->dma_priv);
+
+	exynos_drm_ipp_register(dev, ipp, &ipp_funcs,
+			   DRM_EXYNOS_IPP_CAP_CROP | DRM_EXYNOS_IPP_CAP_ROTATE,
+			   rot->formats, rot->num_formats, "rotator");
+
+	dev_info(dev, "The exynos rotator has been probed successfully\n");
+
+	return 0;
+}
+
+static void rotator_unbind(struct device *dev, struct device *master,
+			void *data)
+{
+	struct rot_context *rot = dev_get_drvdata(dev);
+	struct exynos_drm_ipp *ipp = &rot->ipp;
+
+	exynos_drm_ipp_unregister(dev, ipp);
+	exynos_drm_unregister_dma(rot->drm_dev, rot->dev, &rot->dma_priv);
+}
+
+static const struct component_ops rotator_component_ops = {
+	.bind	= rotator_bind,
+	.unbind = rotator_unbind,
+};
+
+static int rotator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rot_context *rot;
+	const struct rot_variant *variant;
+	int irq;
+	int ret;
+
+	rot = devm_kzalloc(dev, sizeof(*rot), GFP_KERNEL);
+	if (!rot)
+		return -ENOMEM;
+
+	variant = of_device_get_match_data(dev);
+	rot->formats = variant->formats;
+	rot->num_formats = variant->num_formats;
+	rot->dev = dev;
+	rot->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rot->regs))
+		return PTR_ERR(rot->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(dev, irq, rotator_irq_handler, 0, dev_name(dev),
+			       rot);
+	if (ret < 0) {
+		dev_err(dev, "failed to request irq\n");
+		return ret;
+	}
+
+	rot->clock = devm_clk_get(dev, "rotator");
+	if (IS_ERR(rot->clock)) {
+		dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(rot->clock);
+	}
+
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, ROTATOR_AUTOSUSPEND_DELAY);
+	pm_runtime_enable(dev);
+	platform_set_drvdata(pdev, rot);
+
+	ret = component_add(dev, &rotator_component_ops);
+	if (ret)
+		goto err_component;
+
+	return 0;
+
+err_component:
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+	return ret;
+}
+
+static int rotator_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	component_del(dev, &rotator_component_ops);
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int rotator_runtime_suspend(struct device *dev)
+{
+	struct rot_context *rot = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(rot->clock);
+	return 0;
+}
+
+static int rotator_runtime_resume(struct device *dev)
+{
+	struct rot_context *rot = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(rot->clock);
+}
+#endif
+
+static const struct drm_exynos_ipp_limit rotator_s5pv210_rbg888_limits[] = {
+	{ IPP_SIZE_LIMIT(BUFFER, .h = { 8, SZ_16K }, .v = { 8, SZ_16K }) },
+	{ IPP_SIZE_LIMIT(AREA, .h.align = 2, .v.align = 2) },
+};
+
+static const struct drm_exynos_ipp_limit rotator_4210_rbg888_limits[] = {
+	{ IPP_SIZE_LIMIT(BUFFER, .h = { 8, SZ_16K }, .v = { 8, SZ_16K }) },
+	{ IPP_SIZE_LIMIT(AREA, .h.align = 4, .v.align = 4) },
+};
+
+static const struct drm_exynos_ipp_limit rotator_4412_rbg888_limits[] = {
+	{ IPP_SIZE_LIMIT(BUFFER, .h = { 8, SZ_8K }, .v = { 8, SZ_8K }) },
+	{ IPP_SIZE_LIMIT(AREA, .h.align = 4, .v.align = 4) },
+};
+
+static const struct drm_exynos_ipp_limit rotator_5250_rbg888_limits[] = {
+	{ IPP_SIZE_LIMIT(BUFFER, .h = { 8, SZ_8K }, .v = { 8, SZ_8K }) },
+	{ IPP_SIZE_LIMIT(AREA, .h.align = 2, .v.align = 2) },
+};
+
+static const struct drm_exynos_ipp_limit rotator_s5pv210_yuv_limits[] = {
+	{ IPP_SIZE_LIMIT(BUFFER, .h = { 32, SZ_64K }, .v = { 32, SZ_64K }) },
+	{ IPP_SIZE_LIMIT(AREA, .h.align = 8, .v.align = 8) },
+};
+
+static const struct drm_exynos_ipp_limit rotator_4210_yuv_limits[] = {
+	{ IPP_SIZE_LIMIT(BUFFER, .h = { 32, SZ_64K }, .v = { 32, SZ_64K }) },
+	{ IPP_SIZE_LIMIT(AREA, .h.align = 8, .v.align = 8) },
+};
+
+static const struct drm_exynos_ipp_limit rotator_4412_yuv_limits[] = {
+	{ IPP_SIZE_LIMIT(BUFFER, .h = { 32, SZ_32K }, .v = { 32, SZ_32K }) },
+	{ IPP_SIZE_LIMIT(AREA, .h.align = 8, .v.align = 8) },
+};
+
+static const struct exynos_drm_ipp_formats rotator_s5pv210_formats[] = {
+	{ IPP_SRCDST_FORMAT(XRGB8888, rotator_s5pv210_rbg888_limits) },
+	{ IPP_SRCDST_FORMAT(NV12, rotator_s5pv210_yuv_limits) },
+};
+
+static const struct exynos_drm_ipp_formats rotator_4210_formats[] = {
+	{ IPP_SRCDST_FORMAT(XRGB8888, rotator_4210_rbg888_limits) },
+	{ IPP_SRCDST_FORMAT(NV12, rotator_4210_yuv_limits) },
+};
+
+static const struct exynos_drm_ipp_formats rotator_4412_formats[] = {
+	{ IPP_SRCDST_FORMAT(XRGB8888, rotator_4412_rbg888_limits) },
+	{ IPP_SRCDST_FORMAT(NV12, rotator_4412_yuv_limits) },
+};
+
+static const struct exynos_drm_ipp_formats rotator_5250_formats[] = {
+	{ IPP_SRCDST_FORMAT(XRGB8888, rotator_5250_rbg888_limits) },
+	{ IPP_SRCDST_FORMAT(NV12, rotator_4412_yuv_limits) },
+};
+
+static const struct rot_variant rotator_s5pv210_data = {
+	.formats = rotator_s5pv210_formats,
+	.num_formats = ARRAY_SIZE(rotator_s5pv210_formats),
+};
+
+static const struct rot_variant rotator_4210_data = {
+	.formats = rotator_4210_formats,
+	.num_formats = ARRAY_SIZE(rotator_4210_formats),
+};
+
+static const struct rot_variant rotator_4412_data = {
+	.formats = rotator_4412_formats,
+	.num_formats = ARRAY_SIZE(rotator_4412_formats),
+};
+
+static const struct rot_variant rotator_5250_data = {
+	.formats = rotator_5250_formats,
+	.num_formats = ARRAY_SIZE(rotator_5250_formats),
+};
+
+static const struct of_device_id exynos_rotator_match[] = {
+	{
+		.compatible = "samsung,s5pv210-rotator",
+		.data = &rotator_s5pv210_data,
+	}, {
+		.compatible = "samsung,exynos4210-rotator",
+		.data = &rotator_4210_data,
+	}, {
+		.compatible = "samsung,exynos4212-rotator",
+		.data = &rotator_4412_data,
+	}, {
+		.compatible = "samsung,exynos5250-rotator",
+		.data = &rotator_5250_data,
+	}, {
+	},
+};
+MODULE_DEVICE_TABLE(of, exynos_rotator_match);
+
+static const struct dev_pm_ops rotator_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(rotator_runtime_suspend, rotator_runtime_resume,
+									NULL)
+};
+
+struct platform_driver rotator_driver = {
+	.probe		= rotator_probe,
+	.remove		= rotator_remove,
+	.driver		= {
+		.name	= "exynos-rotator",
+		.owner	= THIS_MODULE,
+		.pm	= &rotator_pm_ops,
+		.of_match_table = exynos_rotator_match,
+	},
+};