Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 349 insertions, 0 deletions

diff --git a/drivers/gpu/drm/exynos/regs-decon7.h b/drivers/gpu/drm/exynos/regs-decon7.h
new file mode 100644
index 000000000..5bc5f1db5
--- /dev/null
+++ b/drivers/gpu/drm/exynos/regs-decon7.h
@@ -0,0 +1,349 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Ajay Kumar <ajaykumar.rs@samsung.com>
+ */
+
+#ifndef EXYNOS_REGS_DECON7_H
+#define EXYNOS_REGS_DECON7_H
+
+/* VIDCON0 */
+#define VIDCON0					0x00
+
+#define VIDCON0_SWRESET				(1 << 28)
+#define VIDCON0_DECON_STOP_STATUS		(1 << 2)
+#define VIDCON0_ENVID				(1 << 1)
+#define VIDCON0_ENVID_F				(1 << 0)
+
+/* VIDOUTCON0 */
+#define VIDOUTCON0				0x4
+
+#define VIDOUTCON0_DUAL_MASK			(0x3 << 24)
+#define VIDOUTCON0_DUAL_ON			(0x3 << 24)
+#define VIDOUTCON0_DISP_IF_1_ON			(0x2 << 24)
+#define VIDOUTCON0_DISP_IF_0_ON			(0x1 << 24)
+#define VIDOUTCON0_DUAL_OFF			(0x0 << 24)
+#define VIDOUTCON0_IF_SHIFT			23
+#define VIDOUTCON0_IF_MASK			(0x1 << 23)
+#define VIDOUTCON0_RGBIF			(0x0 << 23)
+#define VIDOUTCON0_I80IF			(0x1 << 23)
+
+/* VIDCON3 */
+#define VIDCON3					0x8
+
+/* VIDCON4 */
+#define VIDCON4					0xC
+#define VIDCON4_FIFOCNT_START_EN		(1 << 0)
+
+/* VCLKCON0 */
+#define VCLKCON0				0x10
+#define VCLKCON0_CLKVALUP			(1 << 8)
+#define VCLKCON0_VCLKFREE			(1 << 0)
+
+/* VCLKCON */
+#define VCLKCON1				0x14
+#define VCLKCON1_CLKVAL_NUM_VCLK(val)		(((val) & 0xff) << 0)
+#define VCLKCON2				0x18
+
+/* SHADOWCON */
+#define SHADOWCON				0x30
+
+#define SHADOWCON_WINx_PROTECT(_win)		(1 << (10 + (_win)))
+
+/* WINCONx */
+#define WINCON(_win)				(0x50 + ((_win) * 4))
+
+#define WINCONx_BUFSTATUS			(0x3 << 30)
+#define WINCONx_BUFSEL_MASK			(0x3 << 28)
+#define WINCONx_BUFSEL_SHIFT			28
+#define WINCONx_TRIPLE_BUF_MODE			(0x1 << 18)
+#define WINCONx_DOUBLE_BUF_MODE			(0x0 << 18)
+#define WINCONx_BURSTLEN_16WORD			(0x0 << 11)
+#define WINCONx_BURSTLEN_8WORD			(0x1 << 11)
+#define WINCONx_BURSTLEN_MASK			(0x1 << 11)
+#define WINCONx_BURSTLEN_SHIFT			11
+#define WINCONx_BLD_PLANE			(0 << 8)
+#define WINCONx_BLD_PIX				(1 << 8)
+#define WINCONx_ALPHA_MUL			(1 << 7)
+
+#define WINCONx_BPPMODE_MASK			(0xf << 2)
+#define WINCONx_BPPMODE_SHIFT			2
+#define WINCONx_BPPMODE_16BPP_565		(0x8 << 2)
+#define WINCONx_BPPMODE_24BPP_BGRx		(0x7 << 2)
+#define WINCONx_BPPMODE_24BPP_RGBx		(0x6 << 2)
+#define WINCONx_BPPMODE_24BPP_xBGR		(0x5 << 2)
+#define WINCONx_BPPMODE_24BPP_xRGB		(0x4 << 2)
+#define WINCONx_BPPMODE_32BPP_BGRA		(0x3 << 2)
+#define WINCONx_BPPMODE_32BPP_RGBA		(0x2 << 2)
+#define WINCONx_BPPMODE_32BPP_ABGR		(0x1 << 2)
+#define WINCONx_BPPMODE_32BPP_ARGB		(0x0 << 2)
+#define WINCONx_ALPHA_SEL			(1 << 1)
+#define WINCONx_ENWIN				(1 << 0)
+
+#define WINCON1_ALPHA_MUL_F			(1 << 7)
+#define WINCON2_ALPHA_MUL_F			(1 << 7)
+#define WINCON3_ALPHA_MUL_F			(1 << 7)
+#define WINCON4_ALPHA_MUL_F			(1 << 7)
+
+/*  VIDOSDxH: The height for the OSD image(READ ONLY)*/
+#define VIDOSD_H(_x)				(0x80 + ((_x) * 4))
+
+/* Frame buffer start addresses: VIDWxxADD0n */
+#define VIDW_BUF_START(_win)			(0x80 + ((_win) * 0x10))
+#define VIDW_BUF_START1(_win)			(0x84 + ((_win) * 0x10))
+#define VIDW_BUF_START2(_win)			(0x88 + ((_win) * 0x10))
+
+#define VIDW_WHOLE_X(_win)			(0x0130 + ((_win) * 8))
+#define VIDW_WHOLE_Y(_win)			(0x0134 + ((_win) * 8))
+#define VIDW_OFFSET_X(_win)			(0x0170 + ((_win) * 8))
+#define VIDW_OFFSET_Y(_win)			(0x0174 + ((_win) * 8))
+#define VIDW_BLKOFFSET(_win)			(0x01B0 + ((_win) * 4))
+#define VIDW_BLKSIZE(win)			(0x0200 + ((_win) * 4))
+
+/* Interrupt controls register */
+#define VIDINTCON2				0x228
+
+#define VIDINTCON1_INTEXTRA1_EN			(1 << 1)
+#define VIDINTCON1_INTEXTRA0_EN			(1 << 0)
+
+/* Interrupt controls and status register */
+#define VIDINTCON3				0x22C
+
+#define VIDINTCON1_INTEXTRA1_PEND		(1 << 1)
+#define VIDINTCON1_INTEXTRA0_PEND		(1 << 0)
+
+/* VIDOSDxA ~ VIDOSDxE */
+#define VIDOSD_BASE				0x230
+
+#define OSD_STRIDE				0x20
+
+#define VIDOSD_A(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x00)
+#define VIDOSD_B(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x04)
+#define VIDOSD_C(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x08)
+#define VIDOSD_D(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x0C)
+#define VIDOSD_E(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x10)
+
+#define VIDOSDxA_TOPLEFT_X_MASK			(0x1fff << 13)
+#define VIDOSDxA_TOPLEFT_X_SHIFT		13
+#define VIDOSDxA_TOPLEFT_X_LIMIT		0x1fff
+#define VIDOSDxA_TOPLEFT_X(_x)			(((_x) & 0x1fff) << 13)
+
+#define VIDOSDxA_TOPLEFT_Y_MASK			(0x1fff << 0)
+#define VIDOSDxA_TOPLEFT_Y_SHIFT		0
+#define VIDOSDxA_TOPLEFT_Y_LIMIT		0x1fff
+#define VIDOSDxA_TOPLEFT_Y(_x)			(((_x) & 0x1fff) << 0)
+
+#define VIDOSDxB_BOTRIGHT_X_MASK		(0x1fff << 13)
+#define VIDOSDxB_BOTRIGHT_X_SHIFT		13
+#define VIDOSDxB_BOTRIGHT_X_LIMIT		0x1fff
+#define VIDOSDxB_BOTRIGHT_X(_x)			(((_x) & 0x1fff) << 13)
+
+#define VIDOSDxB_BOTRIGHT_Y_MASK		(0x1fff << 0)
+#define VIDOSDxB_BOTRIGHT_Y_SHIFT		0
+#define VIDOSDxB_BOTRIGHT_Y_LIMIT		0x1fff
+#define VIDOSDxB_BOTRIGHT_Y(_x)			(((_x) & 0x1fff) << 0)
+
+#define VIDOSDxC_ALPHA0_R_F(_x)			(((_x) & 0xFF) << 16)
+#define VIDOSDxC_ALPHA0_G_F(_x)			(((_x) & 0xFF) << 8)
+#define VIDOSDxC_ALPHA0_B_F(_x)			(((_x) & 0xFF) << 0)
+
+#define VIDOSDxD_ALPHA1_R_F(_x)			(((_x) & 0xFF) << 16)
+#define VIDOSDxD_ALPHA1_G_F(_x)			(((_x) & 0xFF) << 8)
+#define VIDOSDxD_ALPHA1_B_F(_x)			(((_x) & 0xFF) >> 0)
+
+/* Window MAP (Color map) */
+#define WINxMAP(_win)				(0x340 + ((_win) * 4))
+
+#define WINxMAP_MAP				(1 << 24)
+#define WINxMAP_MAP_COLOUR_MASK			(0xffffff << 0)
+#define WINxMAP_MAP_COLOUR_SHIFT		0
+#define WINxMAP_MAP_COLOUR_LIMIT		0xffffff
+#define WINxMAP_MAP_COLOUR(_x)			((_x) << 0)
+
+/* Window colour-key control registers */
+#define WKEYCON					0x370
+
+#define WKEYCON0				0x00
+#define WKEYCON1				0x04
+#define WxKEYCON0_KEYBL_EN			(1 << 26)
+#define WxKEYCON0_KEYEN_F			(1 << 25)
+#define WxKEYCON0_DIRCON			(1 << 24)
+#define WxKEYCON0_COMPKEY_MASK			(0xffffff << 0)
+#define WxKEYCON0_COMPKEY_SHIFT			0
+#define WxKEYCON0_COMPKEY_LIMIT			0xffffff
+#define WxKEYCON0_COMPKEY(_x)			((_x) << 0)
+#define WxKEYCON1_COLVAL_MASK			(0xffffff << 0)
+#define WxKEYCON1_COLVAL_SHIFT			0
+#define WxKEYCON1_COLVAL_LIMIT			0xffffff
+#define WxKEYCON1_COLVAL(_x)			((_x) << 0)
+
+/* color key control register for hardware window 1 ~ 4. */
+#define WKEYCON0_BASE(x)		((WKEYCON + WKEYCON0) + ((x - 1) * 8))
+/* color key value register for hardware window 1 ~ 4. */
+#define WKEYCON1_BASE(x)		((WKEYCON + WKEYCON1) + ((x - 1) * 8))
+
+/* Window KEY Alpha value */
+#define WxKEYALPHA(_win)			(0x3A0 + (((_win) - 1) * 0x4))
+
+#define Wx_KEYALPHA_R_F_SHIFT			16
+#define Wx_KEYALPHA_G_F_SHIFT			8
+#define Wx_KEYALPHA_B_F_SHIFT			0
+
+/* Blending equation */
+#define BLENDE(_win)				(0x03C0 + ((_win) * 4))
+#define BLENDE_COEF_ZERO			0x0
+#define BLENDE_COEF_ONE				0x1
+#define BLENDE_COEF_ALPHA_A			0x2
+#define BLENDE_COEF_ONE_MINUS_ALPHA_A		0x3
+#define BLENDE_COEF_ALPHA_B			0x4
+#define BLENDE_COEF_ONE_MINUS_ALPHA_B		0x5
+#define BLENDE_COEF_ALPHA0			0x6
+#define BLENDE_COEF_A				0xA
+#define BLENDE_COEF_ONE_MINUS_A			0xB
+#define BLENDE_COEF_B				0xC
+#define BLENDE_COEF_ONE_MINUS_B			0xD
+#define BLENDE_Q_FUNC(_v)			((_v) << 18)
+#define BLENDE_P_FUNC(_v)			((_v) << 12)
+#define BLENDE_B_FUNC(_v)			((_v) << 6)
+#define BLENDE_A_FUNC(_v)			((_v) << 0)
+
+/* Blending equation control */
+#define BLENDCON				0x3D8
+#define BLENDCON_NEW_MASK			(1 << 0)
+#define BLENDCON_NEW_8BIT_ALPHA_VALUE		(1 << 0)
+#define BLENDCON_NEW_4BIT_ALPHA_VALUE		(0 << 0)
+
+/* Interrupt control register */
+#define VIDINTCON0				0x500
+
+#define VIDINTCON0_WAKEUP_MASK			(0x3f << 26)
+#define VIDINTCON0_INTEXTRAEN			(1 << 21)
+
+#define VIDINTCON0_FRAMESEL0_SHIFT		15
+#define VIDINTCON0_FRAMESEL0_MASK		(0x3 << 15)
+#define VIDINTCON0_FRAMESEL0_BACKPORCH		(0x0 << 15)
+#define VIDINTCON0_FRAMESEL0_VSYNC		(0x1 << 15)
+#define VIDINTCON0_FRAMESEL0_ACTIVE		(0x2 << 15)
+#define VIDINTCON0_FRAMESEL0_FRONTPORCH		(0x3 << 15)
+
+#define VIDINTCON0_INT_FRAME			(1 << 11)
+
+#define VIDINTCON0_FIFOLEVEL_MASK		(0x7 << 3)
+#define VIDINTCON0_FIFOLEVEL_SHIFT		3
+#define VIDINTCON0_FIFOLEVEL_EMPTY		(0x0 << 3)
+#define VIDINTCON0_FIFOLEVEL_TO25PC		(0x1 << 3)
+#define VIDINTCON0_FIFOLEVEL_TO50PC		(0x2 << 3)
+#define VIDINTCON0_FIFOLEVEL_FULL		(0x4 << 3)
+
+#define VIDINTCON0_FIFOSEL_MAIN_EN		(1 << 1)
+#define VIDINTCON0_INT_FIFO			(1 << 1)
+
+#define VIDINTCON0_INT_ENABLE			(1 << 0)
+
+/* Interrupt controls and status register */
+#define VIDINTCON1				0x504
+
+#define VIDINTCON1_INT_EXTRA			(1 << 3)
+#define VIDINTCON1_INT_I80			(1 << 2)
+#define VIDINTCON1_INT_FRAME			(1 << 1)
+#define VIDINTCON1_INT_FIFO			(1 << 0)
+
+/* VIDCON1 */
+#define VIDCON1(_x)				(0x0600 + ((_x) * 0x50))
+#define VIDCON1_LINECNT_GET(_v)			(((_v) >> 17) & 0x1fff)
+#define VIDCON1_VCLK_MASK			(0x3 << 9)
+#define VIDCON1_VCLK_HOLD			(0x0 << 9)
+#define VIDCON1_VCLK_RUN			(0x1 << 9)
+#define VIDCON1_VCLK_RUN_VDEN_DISABLE		(0x3 << 9)
+#define VIDCON1_RGB_ORDER_O_MASK		(0x7 << 4)
+#define VIDCON1_RGB_ORDER_O_RGB			(0x0 << 4)
+#define VIDCON1_RGB_ORDER_O_GBR			(0x1 << 4)
+#define VIDCON1_RGB_ORDER_O_BRG			(0x2 << 4)
+#define VIDCON1_RGB_ORDER_O_BGR			(0x4 << 4)
+#define VIDCON1_RGB_ORDER_O_RBG			(0x5 << 4)
+#define VIDCON1_RGB_ORDER_O_GRB			(0x6 << 4)
+
+/* VIDTCON0 */
+#define VIDTCON0				0x610
+
+#define VIDTCON0_VBPD_MASK			(0xffff << 16)
+#define VIDTCON0_VBPD_SHIFT			16
+#define VIDTCON0_VBPD_LIMIT			0xffff
+#define VIDTCON0_VBPD(_x)			((_x) << 16)
+
+#define VIDTCON0_VFPD_MASK			(0xffff << 0)
+#define VIDTCON0_VFPD_SHIFT			0
+#define VIDTCON0_VFPD_LIMIT			0xffff
+#define VIDTCON0_VFPD(_x)			((_x) << 0)
+
+/* VIDTCON1 */
+#define VIDTCON1				0x614
+
+#define VIDTCON1_VSPW_MASK			(0xffff << 16)
+#define VIDTCON1_VSPW_SHIFT			16
+#define VIDTCON1_VSPW_LIMIT			0xffff
+#define VIDTCON1_VSPW(_x)			((_x) << 16)
+
+/* VIDTCON2 */
+#define VIDTCON2				0x618
+
+#define VIDTCON2_HBPD_MASK			(0xffff << 16)
+#define VIDTCON2_HBPD_SHIFT			16
+#define VIDTCON2_HBPD_LIMIT			0xffff
+#define VIDTCON2_HBPD(_x)			((_x) << 16)
+
+#define VIDTCON2_HFPD_MASK			(0xffff << 0)
+#define VIDTCON2_HFPD_SHIFT			0
+#define VIDTCON2_HFPD_LIMIT			0xffff
+#define VIDTCON2_HFPD(_x)			((_x) << 0)
+
+/* VIDTCON3 */
+#define VIDTCON3				0x61C
+
+#define VIDTCON3_HSPW_MASK			(0xffff << 16)
+#define VIDTCON3_HSPW_SHIFT			16
+#define VIDTCON3_HSPW_LIMIT			0xffff
+#define VIDTCON3_HSPW(_x)			((_x) << 16)
+
+/* VIDTCON4 */
+#define VIDTCON4				0x620
+
+#define VIDTCON4_LINEVAL_MASK			(0xfff << 16)
+#define VIDTCON4_LINEVAL_SHIFT			16
+#define VIDTCON4_LINEVAL_LIMIT			0xfff
+#define VIDTCON4_LINEVAL(_x)			(((_x) & 0xfff) << 16)
+
+#define VIDTCON4_HOZVAL_MASK			(0xfff << 0)
+#define VIDTCON4_HOZVAL_SHIFT			0
+#define VIDTCON4_HOZVAL_LIMIT			0xfff
+#define VIDTCON4_HOZVAL(_x)			(((_x) & 0xfff) << 0)
+
+/* LINECNT OP THRSHOLD*/
+#define LINECNT_OP_THRESHOLD			0x630
+
+/* CRCCTRL */
+#define CRCCTRL					0x6C8
+#define CRCCTRL_CRCCLKEN			(0x1 << 2)
+#define CRCCTRL_CRCSTART_F			(0x1 << 1)
+#define CRCCTRL_CRCEN				(0x1 << 0)
+
+/* DECON_CMU */
+#define DECON_CMU				0x704
+
+#define DECON_CMU_ALL_CLKGATE_ENABLE		0x3
+#define DECON_CMU_SE_CLKGATE_ENABLE		(0x1 << 2)
+#define DECON_CMU_SFR_CLKGATE_ENABLE		(0x1 << 1)
+#define DECON_CMU_MEM_CLKGATE_ENABLE		(0x1 << 0)
+
+/* DECON_UPDATE */
+#define DECON_UPDATE				0x710
+
+#define DECON_UPDATE_SLAVE_SYNC			(1 << 4)
+#define DECON_UPDATE_STANDALONE_F		(1 << 0)
+
+#endif /* EXYNOS_REGS_DECON7_H */