Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 433 insertions, 0 deletions

diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c
new file mode 100644
index 000000000..75b4eb1c8
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © 2006-2009 Intel Corporation
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Dave Airlie <airlied@linux.ie>
+ *	Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <asm/intel-mid.h>
+
+#include <drm/drm_edid.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include "intel_bios.h"
+#include "power.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+
+/* The max/min PWM frequency in BPCR[31:17] - */
+/* The smallest number is 1 (not 0) that can fit in the
+ * 15-bit field of the and then*/
+/* shifts to the left by one bit to get the actual 16-bit
+ * value that the 15-bits correspond to.*/
+#define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
+#define BRIGHTNESS_MAX_LEVEL 100
+
+/*
+ * Sets the power state for the panel.
+ */
+static void oaktrail_lvds_set_power(struct drm_device *dev,
+				struct gma_encoder *gma_encoder,
+				bool on)
+{
+	u32 pp_status;
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	if (on) {
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+			  POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & (PP_ON | PP_READY)) == PP_READY);
+		dev_priv->is_lvds_on = true;
+		if (dev_priv->ops->lvds_bl_power)
+			dev_priv->ops->lvds_bl_power(dev, true);
+	} else {
+		if (dev_priv->ops->lvds_bl_power)
+			dev_priv->ops->lvds_bl_power(dev, false);
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+			  ~POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+		dev_priv->is_lvds_on = false;
+	}
+	gma_power_end(dev);
+}
+
+static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		oaktrail_lvds_set_power(dev, gma_encoder, true);
+	else
+		oaktrail_lvds_set_power(dev, gma_encoder, false);
+
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static void oaktrail_lvds_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
+	struct drm_connector_list_iter conn_iter;
+	struct drm_connector *connector = NULL;
+	struct drm_crtc *crtc = encoder->crtc;
+	u32 lvds_port;
+	uint64_t v = DRM_MODE_SCALE_FULLSCREEN;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * psb_intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+	lvds_port = (REG_READ(LVDS) &
+		    (~LVDS_PIPEB_SELECT)) |
+		    LVDS_PORT_EN |
+		    LVDS_BORDER_EN;
+
+	/* If the firmware says dither on Moorestown, or the BIOS does
+	   on Oaktrail then enable dithering */
+	if (mode_dev->panel_wants_dither || dev_priv->lvds_dither)
+		lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE;
+
+	REG_WRITE(LVDS, lvds_port);
+
+	/* Find the connector we're trying to set up */
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		if (connector->encoder && connector->encoder->crtc == crtc)
+			break;
+	}
+
+	if (!connector) {
+		drm_connector_list_iter_end(&conn_iter);
+		DRM_ERROR("Couldn't find connector when setting mode");
+		gma_power_end(dev);
+		return;
+	}
+
+	drm_object_property_get_value( &connector->base,
+		dev->mode_config.scaling_mode_property, &v);
+	drm_connector_list_iter_end(&conn_iter);
+
+	if (v == DRM_MODE_SCALE_NO_SCALE)
+		REG_WRITE(PFIT_CONTROL, 0);
+	else if (v == DRM_MODE_SCALE_ASPECT) {
+		if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) ||
+		    (mode->hdisplay != adjusted_mode->crtc_hdisplay)) {
+			if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) ==
+			    (mode->hdisplay * adjusted_mode->crtc_vdisplay))
+				REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+			else if ((adjusted_mode->crtc_hdisplay *
+				mode->vdisplay) > (mode->hdisplay *
+				adjusted_mode->crtc_vdisplay))
+				REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
+					  PFIT_SCALING_MODE_PILLARBOX);
+			else
+				REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
+					  PFIT_SCALING_MODE_LETTERBOX);
+		} else
+			REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+	} else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/
+		REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+
+	gma_power_end(dev);
+}
+
+static void oaktrail_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
+	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
+	mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
+					  BACKLIGHT_DUTY_CYCLE_MASK);
+	oaktrail_lvds_set_power(dev, gma_encoder, false);
+	gma_power_end(dev);
+}
+
+static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	u32 ret;
+
+	if (gma_power_begin(dev, false)) {
+		ret = ((REG_READ(BLC_PWM_CTL) &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+		gma_power_end(dev);
+	} else
+		ret = ((dev_priv->regs.saveBLC_PWM_CTL &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+	return ret;
+}
+
+static void oaktrail_lvds_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
+	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
+
+	if (mode_dev->backlight_duty_cycle == 0)
+		mode_dev->backlight_duty_cycle =
+					oaktrail_lvds_get_max_backlight(dev);
+	oaktrail_lvds_set_power(dev, gma_encoder, true);
+}
+
+static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = {
+	.dpms = oaktrail_lvds_dpms,
+	.mode_fixup = psb_intel_lvds_mode_fixup,
+	.prepare = oaktrail_lvds_prepare,
+	.mode_set = oaktrail_lvds_mode_set,
+	.commit = oaktrail_lvds_commit,
+};
+
+/* Returns the panel fixed mode from configuration. */
+
+static void oaktrail_lvds_get_configuration_mode(struct drm_device *dev,
+					struct psb_intel_mode_device *mode_dev)
+{
+	struct drm_display_mode *mode = NULL;
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD;
+
+	mode_dev->panel_fixed_mode = NULL;
+
+	/* Use the firmware provided data on Moorestown */
+	if (dev_priv->has_gct) {
+		mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+		if (!mode)
+			return;
+
+		mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
+		mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
+		mode->hsync_start = mode->hdisplay + \
+				((ti->hsync_offset_hi << 8) | \
+				ti->hsync_offset_lo);
+		mode->hsync_end = mode->hsync_start + \
+				((ti->hsync_pulse_width_hi << 8) | \
+				ti->hsync_pulse_width_lo);
+		mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
+							ti->hblank_lo);
+		mode->vsync_start = \
+			mode->vdisplay + ((ti->vsync_offset_hi << 4) | \
+						ti->vsync_offset_lo);
+		mode->vsync_end = \
+			mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \
+						ti->vsync_pulse_width_lo);
+		mode->vtotal = mode->vdisplay + \
+				((ti->vblank_hi << 8) | ti->vblank_lo);
+		mode->clock = ti->pixel_clock * 10;
+#if 0
+		pr_info("hdisplay is %d\n", mode->hdisplay);
+		pr_info("vdisplay is %d\n", mode->vdisplay);
+		pr_info("HSS is %d\n", mode->hsync_start);
+		pr_info("HSE is %d\n", mode->hsync_end);
+		pr_info("htotal is %d\n", mode->htotal);
+		pr_info("VSS is %d\n", mode->vsync_start);
+		pr_info("VSE is %d\n", mode->vsync_end);
+		pr_info("vtotal is %d\n", mode->vtotal);
+		pr_info("clock is %d\n", mode->clock);
+#endif
+		mode_dev->panel_fixed_mode = mode;
+	}
+
+	/* Use the BIOS VBT mode if available */
+	if (mode_dev->panel_fixed_mode == NULL && mode_dev->vbt_mode)
+		mode_dev->panel_fixed_mode = drm_mode_duplicate(dev,
+						mode_dev->vbt_mode);
+
+	/* Then try the LVDS VBT mode */
+	if (mode_dev->panel_fixed_mode == NULL)
+		if (dev_priv->lfp_lvds_vbt_mode)
+			mode_dev->panel_fixed_mode =
+				drm_mode_duplicate(dev,
+					dev_priv->lfp_lvds_vbt_mode);
+
+	/* If we still got no mode then bail */
+	if (mode_dev->panel_fixed_mode == NULL)
+		return;
+
+	drm_mode_set_name(mode_dev->panel_fixed_mode);
+	drm_mode_set_crtcinfo(mode_dev->panel_fixed_mode, 0);
+}
+
+/**
+ * oaktrail_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ * @mode_dev: PSB mode device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void oaktrail_lvds_init(struct drm_device *dev,
+		    struct psb_intel_mode_device *mode_dev)
+{
+	struct gma_encoder *gma_encoder;
+	struct gma_connector *gma_connector;
+	struct gma_i2c_chan *ddc_bus;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	struct edid *edid;
+	struct i2c_adapter *i2c_adap;
+	struct drm_display_mode *scan;	/* *modes, *bios_mode; */
+	int ret;
+
+	gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL);
+	if (!gma_encoder)
+		return;
+
+	gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL);
+	if (!gma_connector)
+		goto err_free_encoder;
+
+	connector = &gma_connector->base;
+	encoder = &gma_encoder->base;
+	dev_priv->is_lvds_on = true;
+	ret = drm_connector_init(dev, connector,
+				 &psb_intel_lvds_connector_funcs,
+				 DRM_MODE_CONNECTOR_LVDS);
+	if (ret)
+		goto err_free_connector;
+
+	ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS);
+	if (ret)
+		goto err_connector_cleanup;
+
+	gma_connector_attach_encoder(gma_connector, gma_encoder);
+	gma_encoder->type = INTEL_OUTPUT_LVDS;
+
+	drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs);
+	drm_connector_helper_add(connector,
+				 &psb_intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	drm_object_attach_property(&connector->base,
+					dev->mode_config.scaling_mode_property,
+					DRM_MODE_SCALE_FULLSCREEN);
+	drm_object_attach_property(&connector->base,
+					dev_priv->backlight_property,
+					BRIGHTNESS_MAX_LEVEL);
+
+	mode_dev->panel_wants_dither = false;
+	if (dev_priv->has_gct)
+		mode_dev->panel_wants_dither = (dev_priv->gct_data.
+			Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE);
+        if (dev_priv->lvds_dither)
+                mode_dev->panel_wants_dither = 1;
+
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	edid = NULL;
+	mutex_lock(&dev->mode_config.mutex);
+
+	i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
+	if (i2c_adap)
+		edid = drm_get_edid(connector, i2c_adap);
+
+	if (edid == NULL && dev_priv->lpc_gpio_base) {
+		ddc_bus = oaktrail_lvds_i2c_init(dev);
+		if (!IS_ERR(ddc_bus)) {
+			i2c_adap = &ddc_bus->base;
+			edid = drm_get_edid(connector, i2c_adap);
+		}
+	}
+
+	/*
+	 * Due to the logic in probing for i2c buses above we do not know the
+	 * i2c_adap until now. Hence we cannot use drm_connector_init_with_ddc()
+	 * but must instead set connector->ddc manually here.
+	 */
+	connector->ddc = i2c_adap;
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	if (edid) {
+		drm_connector_update_edid_property(connector, edid);
+		drm_add_edid_modes(connector, edid);
+		kfree(edid);
+
+		list_for_each_entry(scan, &connector->probed_modes, head) {
+			if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+				mode_dev->panel_fixed_mode =
+				    drm_mode_duplicate(dev, scan);
+				goto out;	/* FIXME: check for quirks */
+			}
+		}
+	} else
+		dev_err(dev->dev, "No ddc adapter available!\n");
+	/*
+	 * If we didn't get EDID, try geting panel timing
+	 * from configuration data
+	 */
+	oaktrail_lvds_get_configuration_mode(dev, mode_dev);
+
+	if (mode_dev->panel_fixed_mode) {
+		mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
+		goto out;	/* FIXME: check for quirks */
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!mode_dev->panel_fixed_mode) {
+		dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
+		goto err_unlock;
+	}
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+
+	return;
+
+err_unlock:
+	mutex_unlock(&dev->mode_config.mutex);
+	gma_i2c_destroy(to_gma_i2c_chan(connector->ddc));
+	drm_encoder_cleanup(encoder);
+err_connector_cleanup:
+	drm_connector_cleanup(connector);
+err_free_connector:
+	kfree(gma_connector);
+err_free_encoder:
+	kfree(gma_encoder);
+}
+