Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 547 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
new file mode 100644
index 000000000..578b73885
--- /dev/null
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -0,0 +1,547 @@
+/*
+ * Copyright (C) 2009 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include <linux/module.h>
+
+#include "ch7006_priv.h"
+
+/* DRM encoder functions */
+
+static void ch7006_encoder_set_config(struct drm_encoder *encoder,
+				      void *params)
+{
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+
+	priv->params = *(struct ch7006_encoder_params *)params;
+}
+
+static void ch7006_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+
+	drm_property_destroy(encoder->dev, priv->scale_property);
+
+	kfree(priv);
+	to_encoder_slave(encoder)->slave_priv = NULL;
+
+	drm_i2c_encoder_destroy(encoder);
+}
+
+static void  ch7006_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+	struct ch7006_state *state = &priv->state;
+
+	ch7006_dbg(client, "\n");
+
+	if (mode == priv->last_dpms)
+		return;
+	priv->last_dpms = mode;
+
+	ch7006_setup_power_state(encoder);
+
+	ch7006_load_reg(client, state, CH7006_POWER);
+}
+
+static void ch7006_encoder_save(struct drm_encoder *encoder)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+
+	ch7006_dbg(client, "\n");
+
+	ch7006_state_save(client, &priv->saved_state);
+}
+
+static void ch7006_encoder_restore(struct drm_encoder *encoder)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+
+	ch7006_dbg(client, "\n");
+
+	ch7006_state_load(client, &priv->saved_state);
+}
+
+static bool ch7006_encoder_mode_fixup(struct drm_encoder *encoder,
+				      const struct drm_display_mode *mode,
+				      struct drm_display_mode *adjusted_mode)
+{
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+
+	/* The ch7006 is painfully picky with the input timings so no
+	 * custom modes for now... */
+
+	priv->mode = ch7006_lookup_mode(encoder, mode);
+
+	return !!priv->mode;
+}
+
+static int ch7006_encoder_mode_valid(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode)
+{
+	if (ch7006_lookup_mode(encoder, mode))
+		return MODE_OK;
+	else
+		return MODE_BAD;
+}
+
+static void ch7006_encoder_mode_set(struct drm_encoder *encoder,
+				     struct drm_display_mode *drm_mode,
+				     struct drm_display_mode *adjusted_mode)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+	struct ch7006_encoder_params *params = &priv->params;
+	struct ch7006_state *state = &priv->state;
+	uint8_t *regs = state->regs;
+	const struct ch7006_mode *mode = priv->mode;
+	const struct ch7006_tv_norm_info *norm = &ch7006_tv_norms[priv->norm];
+	int start_active;
+
+	ch7006_dbg(client, "\n");
+
+	regs[CH7006_DISPMODE] = norm->dispmode | mode->dispmode;
+	regs[CH7006_BWIDTH] = 0;
+	regs[CH7006_INPUT_FORMAT] = bitf(CH7006_INPUT_FORMAT_FORMAT,
+					 params->input_format);
+
+	regs[CH7006_CLKMODE] = CH7006_CLKMODE_SUBC_LOCK
+		| bitf(CH7006_CLKMODE_XCM, params->xcm)
+		| bitf(CH7006_CLKMODE_PCM, params->pcm);
+	if (params->clock_mode)
+		regs[CH7006_CLKMODE] |= CH7006_CLKMODE_MASTER;
+	if (params->clock_edge)
+		regs[CH7006_CLKMODE] |= CH7006_CLKMODE_POS_EDGE;
+
+	start_active = (drm_mode->htotal & ~0x7) - (drm_mode->hsync_start & ~0x7);
+	regs[CH7006_POV] = bitf(CH7006_POV_START_ACTIVE_8, start_active);
+	regs[CH7006_START_ACTIVE] = bitf(CH7006_START_ACTIVE_0, start_active);
+
+	regs[CH7006_INPUT_SYNC] = 0;
+	if (params->sync_direction)
+		regs[CH7006_INPUT_SYNC] |= CH7006_INPUT_SYNC_OUTPUT;
+	if (params->sync_encoding)
+		regs[CH7006_INPUT_SYNC] |= CH7006_INPUT_SYNC_EMBEDDED;
+	if (drm_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		regs[CH7006_INPUT_SYNC] |= CH7006_INPUT_SYNC_PVSYNC;
+	if (drm_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		regs[CH7006_INPUT_SYNC] |= CH7006_INPUT_SYNC_PHSYNC;
+
+	regs[CH7006_DETECT] = 0;
+	regs[CH7006_BCLKOUT] = 0;
+
+	regs[CH7006_SUBC_INC3] = 0;
+	if (params->pout_level)
+		regs[CH7006_SUBC_INC3] |= CH7006_SUBC_INC3_POUT_3_3V;
+
+	regs[CH7006_SUBC_INC4] = 0;
+	if (params->active_detect)
+		regs[CH7006_SUBC_INC4] |= CH7006_SUBC_INC4_DS_INPUT;
+
+	regs[CH7006_PLL_CONTROL] = priv->saved_state.regs[CH7006_PLL_CONTROL];
+
+	ch7006_setup_levels(encoder);
+	ch7006_setup_subcarrier(encoder);
+	ch7006_setup_pll(encoder);
+	ch7006_setup_power_state(encoder);
+	ch7006_setup_properties(encoder);
+
+	ch7006_state_load(client, state);
+}
+
+static enum drm_connector_status ch7006_encoder_detect(struct drm_encoder *encoder,
+						       struct drm_connector *connector)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+	struct ch7006_state *state = &priv->state;
+	int det;
+
+	ch7006_dbg(client, "\n");
+
+	ch7006_save_reg(client, state, CH7006_DETECT);
+	ch7006_save_reg(client, state, CH7006_POWER);
+	ch7006_save_reg(client, state, CH7006_CLKMODE);
+
+	ch7006_write(client, CH7006_POWER, CH7006_POWER_RESET |
+					   bitfs(CH7006_POWER_LEVEL, NORMAL));
+	ch7006_write(client, CH7006_CLKMODE, CH7006_CLKMODE_MASTER);
+
+	ch7006_write(client, CH7006_DETECT, CH7006_DETECT_SENSE);
+
+	ch7006_write(client, CH7006_DETECT, 0);
+
+	det = ch7006_read(client, CH7006_DETECT);
+
+	ch7006_load_reg(client, state, CH7006_CLKMODE);
+	ch7006_load_reg(client, state, CH7006_POWER);
+	ch7006_load_reg(client, state, CH7006_DETECT);
+
+	if ((det & (CH7006_DETECT_SVIDEO_Y_TEST|
+		    CH7006_DETECT_SVIDEO_C_TEST|
+		    CH7006_DETECT_CVBS_TEST)) == 0)
+		priv->subconnector = DRM_MODE_SUBCONNECTOR_SCART;
+	else if ((det & (CH7006_DETECT_SVIDEO_Y_TEST|
+			 CH7006_DETECT_SVIDEO_C_TEST)) == 0)
+		priv->subconnector = DRM_MODE_SUBCONNECTOR_SVIDEO;
+	else if ((det & CH7006_DETECT_CVBS_TEST) == 0)
+		priv->subconnector = DRM_MODE_SUBCONNECTOR_Composite;
+	else
+		priv->subconnector = DRM_MODE_SUBCONNECTOR_Unknown;
+
+	drm_object_property_set_value(&connector->base,
+			encoder->dev->mode_config.tv_subconnector_property,
+							priv->subconnector);
+
+	return priv->subconnector ? connector_status_connected :
+					connector_status_disconnected;
+}
+
+static int ch7006_encoder_get_modes(struct drm_encoder *encoder,
+				    struct drm_connector *connector)
+{
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+	const struct ch7006_mode *mode;
+	int n = 0;
+
+	for (mode = ch7006_modes; mode->mode.clock; mode++) {
+		if (~mode->valid_scales & 1<<priv->scale ||
+		    ~mode->valid_norms & 1<<priv->norm)
+			continue;
+
+		drm_mode_probed_add(connector,
+				drm_mode_duplicate(encoder->dev, &mode->mode));
+
+		n++;
+	}
+
+	return n;
+}
+
+static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
+					   struct drm_connector *connector)
+{
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+	struct drm_device *dev = encoder->dev;
+	struct drm_mode_config *conf = &dev->mode_config;
+
+	drm_mode_create_tv_properties(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
+
+	priv->scale_property = drm_property_create_range(dev, 0, "scale", 0, 2);
+	if (!priv->scale_property)
+		return -ENOMEM;
+
+	drm_object_attach_property(&connector->base, conf->tv_select_subconnector_property,
+				      priv->select_subconnector);
+	drm_object_attach_property(&connector->base, conf->tv_subconnector_property,
+				      priv->subconnector);
+	drm_object_attach_property(&connector->base, conf->tv_left_margin_property,
+				      priv->hmargin);
+	drm_object_attach_property(&connector->base, conf->tv_bottom_margin_property,
+				      priv->vmargin);
+	drm_object_attach_property(&connector->base, conf->tv_mode_property,
+				      priv->norm);
+	drm_object_attach_property(&connector->base, conf->tv_brightness_property,
+				      priv->brightness);
+	drm_object_attach_property(&connector->base, conf->tv_contrast_property,
+				      priv->contrast);
+	drm_object_attach_property(&connector->base, conf->tv_flicker_reduction_property,
+				      priv->flicker);
+	drm_object_attach_property(&connector->base, priv->scale_property,
+				      priv->scale);
+
+	return 0;
+}
+
+static int ch7006_encoder_set_property(struct drm_encoder *encoder,
+				       struct drm_connector *connector,
+				       struct drm_property *property,
+				       uint64_t val)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	struct ch7006_priv *priv = to_ch7006_priv(encoder);
+	struct ch7006_state *state = &priv->state;
+	struct drm_mode_config *conf = &encoder->dev->mode_config;
+	struct drm_crtc *crtc = encoder->crtc;
+	bool modes_changed = false;
+
+	ch7006_dbg(client, "\n");
+
+	if (property == conf->tv_select_subconnector_property) {
+		priv->select_subconnector = val;
+
+		ch7006_setup_power_state(encoder);
+
+		ch7006_load_reg(client, state, CH7006_POWER);
+
+	} else if (property == conf->tv_left_margin_property) {
+		priv->hmargin = val;
+
+		ch7006_setup_properties(encoder);
+
+		ch7006_load_reg(client, state, CH7006_POV);
+		ch7006_load_reg(client, state, CH7006_HPOS);
+
+	} else if (property == conf->tv_bottom_margin_property) {
+		priv->vmargin = val;
+
+		ch7006_setup_properties(encoder);
+
+		ch7006_load_reg(client, state, CH7006_POV);
+		ch7006_load_reg(client, state, CH7006_VPOS);
+
+	} else if (property == conf->tv_mode_property) {
+		if (connector->dpms != DRM_MODE_DPMS_OFF)
+			return -EINVAL;
+
+		priv->norm = val;
+
+		modes_changed = true;
+
+	} else if (property == conf->tv_brightness_property) {
+		priv->brightness = val;
+
+		ch7006_setup_levels(encoder);
+
+		ch7006_load_reg(client, state, CH7006_BLACK_LEVEL);
+
+	} else if (property == conf->tv_contrast_property) {
+		priv->contrast = val;
+
+		ch7006_setup_properties(encoder);
+
+		ch7006_load_reg(client, state, CH7006_CONTRAST);
+
+	} else if (property == conf->tv_flicker_reduction_property) {
+		priv->flicker = val;
+
+		ch7006_setup_properties(encoder);
+
+		ch7006_load_reg(client, state, CH7006_FFILTER);
+
+	} else if (property == priv->scale_property) {
+		if (connector->dpms != DRM_MODE_DPMS_OFF)
+			return -EINVAL;
+
+		priv->scale = val;
+
+		modes_changed = true;
+
+	} else {
+		return -EINVAL;
+	}
+
+	if (modes_changed) {
+		drm_helper_probe_single_connector_modes(connector, 0, 0);
+
+		if (crtc)
+			drm_crtc_helper_set_mode(crtc, &crtc->mode,
+						 crtc->x, crtc->y,
+						 crtc->primary->fb);
+	}
+
+	return 0;
+}
+
+static const struct drm_encoder_slave_funcs ch7006_encoder_funcs = {
+	.set_config = ch7006_encoder_set_config,
+	.destroy = ch7006_encoder_destroy,
+	.dpms = ch7006_encoder_dpms,
+	.save = ch7006_encoder_save,
+	.restore = ch7006_encoder_restore,
+	.mode_fixup = ch7006_encoder_mode_fixup,
+	.mode_valid = ch7006_encoder_mode_valid,
+	.mode_set = ch7006_encoder_mode_set,
+	.detect = ch7006_encoder_detect,
+	.get_modes = ch7006_encoder_get_modes,
+	.create_resources = ch7006_encoder_create_resources,
+	.set_property = ch7006_encoder_set_property,
+};
+
+
+/* I2C driver functions */
+
+static int ch7006_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	uint8_t addr = CH7006_VERSION_ID;
+	uint8_t val;
+	int ret;
+
+	ch7006_dbg(client, "\n");
+
+	ret = i2c_master_send(client, &addr, sizeof(addr));
+	if (ret < 0)
+		goto fail;
+
+	ret = i2c_master_recv(client, &val, sizeof(val));
+	if (ret < 0)
+		goto fail;
+
+	ch7006_info(client, "Detected version ID: %x\n", val);
+
+	/* I don't know what this is for, but otherwise I get no
+	 * signal.
+	 */
+	ch7006_write(client, 0x3d, 0x0);
+
+	return 0;
+
+fail:
+	ch7006_err(client, "Error %d reading version ID\n", ret);
+
+	return -ENODEV;
+}
+
+static void ch7006_remove(struct i2c_client *client)
+{
+	ch7006_dbg(client, "\n");
+}
+
+static int ch7006_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	ch7006_dbg(client, "\n");
+
+	ch7006_write(client, 0x3d, 0x0);
+
+	return 0;
+}
+
+static int ch7006_encoder_init(struct i2c_client *client,
+			       struct drm_device *dev,
+			       struct drm_encoder_slave *encoder)
+{
+	struct ch7006_priv *priv;
+	int i;
+
+	ch7006_dbg(client, "\n");
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	encoder->slave_priv = priv;
+	encoder->slave_funcs = &ch7006_encoder_funcs;
+
+	priv->norm = TV_NORM_PAL;
+	priv->select_subconnector = DRM_MODE_SUBCONNECTOR_Automatic;
+	priv->subconnector = DRM_MODE_SUBCONNECTOR_Unknown;
+	priv->scale = 1;
+	priv->contrast = 50;
+	priv->brightness = 50;
+	priv->flicker = 50;
+	priv->hmargin = 50;
+	priv->vmargin = 50;
+	priv->last_dpms = -1;
+	priv->chip_version = ch7006_read(client, CH7006_VERSION_ID);
+
+	if (ch7006_tv_norm) {
+		for (i = 0; i < NUM_TV_NORMS; i++) {
+			if (!strcmp(ch7006_tv_norm_names[i], ch7006_tv_norm)) {
+				priv->norm = i;
+				break;
+			}
+		}
+
+		if (i == NUM_TV_NORMS)
+			ch7006_err(client, "Invalid TV norm setting \"%s\".\n",
+				   ch7006_tv_norm);
+	}
+
+	if (ch7006_scale >= 0 && ch7006_scale <= 2)
+		priv->scale = ch7006_scale;
+	else
+		ch7006_err(client, "Invalid scale setting \"%d\".\n",
+			   ch7006_scale);
+
+	return 0;
+}
+
+static const struct i2c_device_id ch7006_ids[] = {
+	{ "ch7006", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ch7006_ids);
+
+static const struct dev_pm_ops ch7006_pm_ops = {
+	.resume = ch7006_resume,
+};
+
+static struct drm_i2c_encoder_driver ch7006_driver = {
+	.i2c_driver = {
+		.probe = ch7006_probe,
+		.remove = ch7006_remove,
+
+		.driver = {
+			.name = "ch7006",
+			.pm = &ch7006_pm_ops,
+		},
+
+		.id_table = ch7006_ids,
+	},
+
+	.encoder_init = ch7006_encoder_init,
+};
+
+
+/* Module initialization */
+
+static int __init ch7006_init(void)
+{
+	return drm_i2c_encoder_register(THIS_MODULE, &ch7006_driver);
+}
+
+static void __exit ch7006_exit(void)
+{
+	drm_i2c_encoder_unregister(&ch7006_driver);
+}
+
+int ch7006_debug;
+module_param_named(debug, ch7006_debug, int, 0600);
+MODULE_PARM_DESC(debug, "Enable debug output.");
+
+char *ch7006_tv_norm;
+module_param_named(tv_norm, ch7006_tv_norm, charp, 0600);
+MODULE_PARM_DESC(tv_norm, "Default TV norm.\n"
+		 "\t\tSupported: PAL, PAL-M, PAL-N, PAL-Nc, PAL-60, NTSC-M, NTSC-J.\n"
+		 "\t\tDefault: PAL");
+
+int ch7006_scale = 1;
+module_param_named(scale, ch7006_scale, int, 0600);
+MODULE_PARM_DESC(scale, "Default scale.\n"
+		 "\t\tSupported: 0 -> Select video modes with a higher blanking ratio.\n"
+		 "\t\t\t1 -> Select default video modes.\n"
+		 "\t\t\t2 -> Select video modes with a lower blanking ratio.");
+
+MODULE_AUTHOR("Francisco Jerez <currojerez@riseup.net>");
+MODULE_DESCRIPTION("Chrontel ch7006 TV encoder driver");
+MODULE_LICENSE("GPL and additional rights");
+
+module_init(ch7006_init);
+module_exit(ch7006_exit);