Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 632 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/display/g4x_hdmi.c b/drivers/gpu/drm/i915/display/g4x_hdmi.c
new file mode 100644
index 000000000..c3580d967
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/g4x_hdmi.c
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ *
+ * HDMI support for G4x,ILK,SNB,IVB,VLV,CHV (HSW+ handled by the DDI code).
+ */
+
+#include "g4x_hdmi.h"
+#include "i915_reg.h"
+#include "intel_audio.h"
+#include "intel_connector.h"
+#include "intel_crtc.h"
+#include "intel_de.h"
+#include "intel_display_power.h"
+#include "intel_display_types.h"
+#include "intel_dpio_phy.h"
+#include "intel_fifo_underrun.h"
+#include "intel_hdmi.h"
+#include "intel_hotplug.h"
+#include "intel_sdvo.h"
+#include "vlv_sideband.h"
+
+static void intel_hdmi_prepare(struct intel_encoder *encoder,
+			       const struct intel_crtc_state *crtc_state)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
+	u32 hdmi_val;
+
+	intel_dp_dual_mode_set_tmds_output(intel_hdmi, true);
+
+	hdmi_val = SDVO_ENCODING_HDMI;
+	if (!HAS_PCH_SPLIT(dev_priv) && crtc_state->limited_color_range)
+		hdmi_val |= HDMI_COLOR_RANGE_16_235;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		hdmi_val |= SDVO_VSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		hdmi_val |= SDVO_HSYNC_ACTIVE_HIGH;
+
+	if (crtc_state->pipe_bpp > 24)
+		hdmi_val |= HDMI_COLOR_FORMAT_12bpc;
+	else
+		hdmi_val |= SDVO_COLOR_FORMAT_8bpc;
+
+	if (crtc_state->has_hdmi_sink)
+		hdmi_val |= HDMI_MODE_SELECT_HDMI;
+
+	if (HAS_PCH_CPT(dev_priv))
+		hdmi_val |= SDVO_PIPE_SEL_CPT(crtc->pipe);
+	else if (IS_CHERRYVIEW(dev_priv))
+		hdmi_val |= SDVO_PIPE_SEL_CHV(crtc->pipe);
+	else
+		hdmi_val |= SDVO_PIPE_SEL(crtc->pipe);
+
+	intel_de_write(dev_priv, intel_hdmi->hdmi_reg, hdmi_val);
+	intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+}
+
+static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
+				    enum pipe *pipe)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	intel_wakeref_t wakeref;
+	bool ret;
+
+	wakeref = intel_display_power_get_if_enabled(dev_priv,
+						     encoder->power_domain);
+	if (!wakeref)
+		return false;
+
+	ret = intel_sdvo_port_enabled(dev_priv, intel_hdmi->hdmi_reg, pipe);
+
+	intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
+
+	return ret;
+}
+
+static int g4x_hdmi_compute_config(struct intel_encoder *encoder,
+				   struct intel_crtc_state *crtc_state,
+				   struct drm_connector_state *conn_state)
+{
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+
+	if (HAS_PCH_SPLIT(i915))
+		crtc_state->has_pch_encoder = true;
+
+	return intel_hdmi_compute_config(encoder, crtc_state, conn_state);
+}
+
+static void intel_hdmi_get_config(struct intel_encoder *encoder,
+				  struct intel_crtc_state *pipe_config)
+{
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	u32 tmp, flags = 0;
+	int dotclock;
+
+	pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
+
+	tmp = intel_de_read(dev_priv, intel_hdmi->hdmi_reg);
+
+	if (tmp & SDVO_HSYNC_ACTIVE_HIGH)
+		flags |= DRM_MODE_FLAG_PHSYNC;
+	else
+		flags |= DRM_MODE_FLAG_NHSYNC;
+
+	if (tmp & SDVO_VSYNC_ACTIVE_HIGH)
+		flags |= DRM_MODE_FLAG_PVSYNC;
+	else
+		flags |= DRM_MODE_FLAG_NVSYNC;
+
+	if (tmp & HDMI_MODE_SELECT_HDMI)
+		pipe_config->has_hdmi_sink = true;
+
+	pipe_config->infoframes.enable |=
+		intel_hdmi_infoframes_enabled(encoder, pipe_config);
+
+	if (pipe_config->infoframes.enable)
+		pipe_config->has_infoframe = true;
+
+	if (tmp & HDMI_AUDIO_ENABLE)
+		pipe_config->has_audio = true;
+
+	if (!HAS_PCH_SPLIT(dev_priv) &&
+	    tmp & HDMI_COLOR_RANGE_16_235)
+		pipe_config->limited_color_range = true;
+
+	pipe_config->hw.adjusted_mode.flags |= flags;
+
+	if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc)
+		dotclock = DIV_ROUND_CLOSEST(pipe_config->port_clock * 2, 3);
+	else
+		dotclock = pipe_config->port_clock;
+
+	if (pipe_config->pixel_multiplier)
+		dotclock /= pipe_config->pixel_multiplier;
+
+	pipe_config->hw.adjusted_mode.crtc_clock = dotclock;
+
+	pipe_config->lane_count = 4;
+
+	intel_hdmi_read_gcp_infoframe(encoder, pipe_config);
+
+	intel_read_infoframe(encoder, pipe_config,
+			     HDMI_INFOFRAME_TYPE_AVI,
+			     &pipe_config->infoframes.avi);
+	intel_read_infoframe(encoder, pipe_config,
+			     HDMI_INFOFRAME_TYPE_SPD,
+			     &pipe_config->infoframes.spd);
+	intel_read_infoframe(encoder, pipe_config,
+			     HDMI_INFOFRAME_TYPE_VENDOR,
+			     &pipe_config->infoframes.hdmi);
+}
+
+static void g4x_hdmi_enable_port(struct intel_encoder *encoder,
+				 const struct intel_crtc_state *pipe_config)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	u32 temp;
+
+	temp = intel_de_read(dev_priv, intel_hdmi->hdmi_reg);
+
+	temp |= SDVO_ENABLE;
+	if (pipe_config->has_audio)
+		temp |= HDMI_AUDIO_ENABLE;
+
+	intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+	intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+}
+
+static void g4x_enable_hdmi(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
+			    const struct intel_crtc_state *pipe_config,
+			    const struct drm_connector_state *conn_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+
+	g4x_hdmi_enable_port(encoder, pipe_config);
+
+	drm_WARN_ON(&dev_priv->drm, pipe_config->has_audio &&
+		    !pipe_config->has_hdmi_sink);
+	intel_audio_codec_enable(encoder, pipe_config, conn_state);
+}
+
+static void ibx_enable_hdmi(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
+			    const struct intel_crtc_state *pipe_config,
+			    const struct drm_connector_state *conn_state)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	u32 temp;
+
+	temp = intel_de_read(dev_priv, intel_hdmi->hdmi_reg);
+
+	temp |= SDVO_ENABLE;
+	if (pipe_config->has_audio)
+		temp |= HDMI_AUDIO_ENABLE;
+
+	/*
+	 * HW workaround, need to write this twice for issue
+	 * that may result in first write getting masked.
+	 */
+	intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+	intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+	intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+	intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+
+	/*
+	 * HW workaround, need to toggle enable bit off and on
+	 * for 12bpc with pixel repeat.
+	 *
+	 * FIXME: BSpec says this should be done at the end of
+	 * the modeset sequence, so not sure if this isn't too soon.
+	 */
+	if (pipe_config->pipe_bpp > 24 &&
+	    pipe_config->pixel_multiplier > 1) {
+		intel_de_write(dev_priv, intel_hdmi->hdmi_reg,
+			       temp & ~SDVO_ENABLE);
+		intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+
+		/*
+		 * HW workaround, need to write this twice for issue
+		 * that may result in first write getting masked.
+		 */
+		intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+		intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+		intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+		intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+	}
+
+	drm_WARN_ON(&dev_priv->drm, pipe_config->has_audio &&
+		    !pipe_config->has_hdmi_sink);
+	intel_audio_codec_enable(encoder, pipe_config, conn_state);
+}
+
+static void cpt_enable_hdmi(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
+			    const struct intel_crtc_state *pipe_config,
+			    const struct drm_connector_state *conn_state)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	enum pipe pipe = crtc->pipe;
+	u32 temp;
+
+	temp = intel_de_read(dev_priv, intel_hdmi->hdmi_reg);
+
+	temp |= SDVO_ENABLE;
+	if (pipe_config->has_audio)
+		temp |= HDMI_AUDIO_ENABLE;
+
+	/*
+	 * WaEnableHDMI8bpcBefore12bpc:snb,ivb
+	 *
+	 * The procedure for 12bpc is as follows:
+	 * 1. disable HDMI clock gating
+	 * 2. enable HDMI with 8bpc
+	 * 3. enable HDMI with 12bpc
+	 * 4. enable HDMI clock gating
+	 */
+
+	if (pipe_config->pipe_bpp > 24) {
+		intel_de_write(dev_priv, TRANS_CHICKEN1(pipe),
+			       intel_de_read(dev_priv, TRANS_CHICKEN1(pipe)) | TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE);
+
+		temp &= ~SDVO_COLOR_FORMAT_MASK;
+		temp |= SDVO_COLOR_FORMAT_8bpc;
+	}
+
+	intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+	intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+
+	if (pipe_config->pipe_bpp > 24) {
+		temp &= ~SDVO_COLOR_FORMAT_MASK;
+		temp |= HDMI_COLOR_FORMAT_12bpc;
+
+		intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+		intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+
+		intel_de_write(dev_priv, TRANS_CHICKEN1(pipe),
+			       intel_de_read(dev_priv, TRANS_CHICKEN1(pipe)) & ~TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE);
+	}
+
+	drm_WARN_ON(&dev_priv->drm, pipe_config->has_audio &&
+		    !pipe_config->has_hdmi_sink);
+	intel_audio_codec_enable(encoder, pipe_config, conn_state);
+}
+
+static void vlv_enable_hdmi(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
+			    const struct intel_crtc_state *pipe_config,
+			    const struct drm_connector_state *conn_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+
+	drm_WARN_ON(&dev_priv->drm, pipe_config->has_audio &&
+		    !pipe_config->has_hdmi_sink);
+	intel_audio_codec_enable(encoder, pipe_config, conn_state);
+}
+
+static void intel_disable_hdmi(struct intel_atomic_state *state,
+			       struct intel_encoder *encoder,
+			       const struct intel_crtc_state *old_crtc_state,
+			       const struct drm_connector_state *old_conn_state)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	struct intel_digital_port *dig_port =
+		hdmi_to_dig_port(intel_hdmi);
+	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
+	u32 temp;
+
+	temp = intel_de_read(dev_priv, intel_hdmi->hdmi_reg);
+
+	temp &= ~(SDVO_ENABLE | HDMI_AUDIO_ENABLE);
+	intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+	intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+
+	/*
+	 * HW workaround for IBX, we need to move the port
+	 * to transcoder A after disabling it to allow the
+	 * matching DP port to be enabled on transcoder A.
+	 */
+	if (HAS_PCH_IBX(dev_priv) && crtc->pipe == PIPE_B) {
+		/*
+		 * We get CPU/PCH FIFO underruns on the other pipe when
+		 * doing the workaround. Sweep them under the rug.
+		 */
+		intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, false);
+		intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);
+
+		temp &= ~SDVO_PIPE_SEL_MASK;
+		temp |= SDVO_ENABLE | SDVO_PIPE_SEL(PIPE_A);
+		/*
+		 * HW workaround, need to write this twice for issue
+		 * that may result in first write getting masked.
+		 */
+		intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+		intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+		intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+		intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+
+		temp &= ~SDVO_ENABLE;
+		intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
+		intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
+
+		intel_wait_for_vblank_if_active(dev_priv, PIPE_A);
+		intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, true);
+		intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true);
+	}
+
+	dig_port->set_infoframes(encoder,
+				       false,
+				       old_crtc_state, old_conn_state);
+
+	intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
+}
+
+static void g4x_disable_hdmi(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
+			     const struct intel_crtc_state *old_crtc_state,
+			     const struct drm_connector_state *old_conn_state)
+{
+	intel_audio_codec_disable(encoder, old_crtc_state, old_conn_state);
+
+	intel_disable_hdmi(state, encoder, old_crtc_state, old_conn_state);
+}
+
+static void pch_disable_hdmi(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
+			     const struct intel_crtc_state *old_crtc_state,
+			     const struct drm_connector_state *old_conn_state)
+{
+	intel_audio_codec_disable(encoder, old_crtc_state, old_conn_state);
+}
+
+static void pch_post_disable_hdmi(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
+				  const struct intel_crtc_state *old_crtc_state,
+				  const struct drm_connector_state *old_conn_state)
+{
+	intel_disable_hdmi(state, encoder, old_crtc_state, old_conn_state);
+}
+
+static void intel_hdmi_pre_enable(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
+				  const struct intel_crtc_state *pipe_config,
+				  const struct drm_connector_state *conn_state)
+{
+	struct intel_digital_port *dig_port =
+		enc_to_dig_port(encoder);
+
+	intel_hdmi_prepare(encoder, pipe_config);
+
+	dig_port->set_infoframes(encoder,
+				       pipe_config->has_infoframe,
+				       pipe_config, conn_state);
+}
+
+static void vlv_hdmi_pre_enable(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
+				const struct intel_crtc_state *pipe_config,
+				const struct drm_connector_state *conn_state)
+{
+	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+
+	vlv_phy_pre_encoder_enable(encoder, pipe_config);
+
+	/* HDMI 1.0V-2dB */
+	vlv_set_phy_signal_level(encoder, pipe_config,
+				 0x2b245f5f, 0x00002000,
+				 0x5578b83a, 0x2b247878);
+
+	dig_port->set_infoframes(encoder,
+			      pipe_config->has_infoframe,
+			      pipe_config, conn_state);
+
+	g4x_hdmi_enable_port(encoder, pipe_config);
+
+	vlv_wait_port_ready(dev_priv, dig_port, 0x0);
+}
+
+static void vlv_hdmi_pre_pll_enable(struct intel_atomic_state *state,
+				    struct intel_encoder *encoder,
+				    const struct intel_crtc_state *pipe_config,
+				    const struct drm_connector_state *conn_state)
+{
+	intel_hdmi_prepare(encoder, pipe_config);
+
+	vlv_phy_pre_pll_enable(encoder, pipe_config);
+}
+
+static void chv_hdmi_pre_pll_enable(struct intel_atomic_state *state,
+				    struct intel_encoder *encoder,
+				    const struct intel_crtc_state *pipe_config,
+				    const struct drm_connector_state *conn_state)
+{
+	intel_hdmi_prepare(encoder, pipe_config);
+
+	chv_phy_pre_pll_enable(encoder, pipe_config);
+}
+
+static void chv_hdmi_post_pll_disable(struct intel_atomic_state *state,
+				      struct intel_encoder *encoder,
+				      const struct intel_crtc_state *old_crtc_state,
+				      const struct drm_connector_state *old_conn_state)
+{
+	chv_phy_post_pll_disable(encoder, old_crtc_state);
+}
+
+static void vlv_hdmi_post_disable(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
+				  const struct intel_crtc_state *old_crtc_state,
+				  const struct drm_connector_state *old_conn_state)
+{
+	/* Reset lanes to avoid HDMI flicker (VLV w/a) */
+	vlv_phy_reset_lanes(encoder, old_crtc_state);
+}
+
+static void chv_hdmi_post_disable(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
+				  const struct intel_crtc_state *old_crtc_state,
+				  const struct drm_connector_state *old_conn_state)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+
+	vlv_dpio_get(dev_priv);
+
+	/* Assert data lane reset */
+	chv_data_lane_soft_reset(encoder, old_crtc_state, true);
+
+	vlv_dpio_put(dev_priv);
+}
+
+static void chv_hdmi_pre_enable(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
+				const struct intel_crtc_state *pipe_config,
+				const struct drm_connector_state *conn_state)
+{
+	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+
+	chv_phy_pre_encoder_enable(encoder, pipe_config);
+
+	/* FIXME: Program the support xxx V-dB */
+	/* Use 800mV-0dB */
+	chv_set_phy_signal_level(encoder, pipe_config, 128, 102, false);
+
+	dig_port->set_infoframes(encoder,
+			      pipe_config->has_infoframe,
+			      pipe_config, conn_state);
+
+	g4x_hdmi_enable_port(encoder, pipe_config);
+
+	vlv_wait_port_ready(dev_priv, dig_port, 0x0);
+
+	/* Second common lane will stay alive on its own now */
+	chv_phy_release_cl2_override(encoder);
+}
+
+static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {
+	.destroy = intel_encoder_destroy,
+};
+
+static enum intel_hotplug_state
+intel_hdmi_hotplug(struct intel_encoder *encoder,
+		   struct intel_connector *connector)
+{
+	enum intel_hotplug_state state;
+
+	state = intel_encoder_hotplug(encoder, connector);
+
+	/*
+	 * On many platforms the HDMI live state signal is known to be
+	 * unreliable, so we can't use it to detect if a sink is connected or
+	 * not. Instead we detect if it's connected based on whether we can
+	 * read the EDID or not. That in turn has a problem during disconnect,
+	 * since the HPD interrupt may be raised before the DDC lines get
+	 * disconnected (due to how the required length of DDC vs. HPD
+	 * connector pins are specified) and so we'll still be able to get a
+	 * valid EDID. To solve this schedule another detection cycle if this
+	 * time around we didn't detect any change in the sink's connection
+	 * status.
+	 */
+	if (state == INTEL_HOTPLUG_UNCHANGED && !connector->hotplug_retries)
+		state = INTEL_HOTPLUG_RETRY;
+
+	return state;
+}
+
+void g4x_hdmi_init(struct drm_i915_private *dev_priv,
+		   i915_reg_t hdmi_reg, enum port port)
+{
+	struct intel_digital_port *dig_port;
+	struct intel_encoder *intel_encoder;
+	struct intel_connector *intel_connector;
+
+	dig_port = kzalloc(sizeof(*dig_port), GFP_KERNEL);
+	if (!dig_port)
+		return;
+
+	intel_connector = intel_connector_alloc();
+	if (!intel_connector) {
+		kfree(dig_port);
+		return;
+	}
+
+	intel_encoder = &dig_port->base;
+
+	mutex_init(&dig_port->hdcp_mutex);
+
+	drm_encoder_init(&dev_priv->drm, &intel_encoder->base,
+			 &intel_hdmi_enc_funcs, DRM_MODE_ENCODER_TMDS,
+			 "HDMI %c", port_name(port));
+
+	intel_encoder->hotplug = intel_hdmi_hotplug;
+	intel_encoder->compute_config = g4x_hdmi_compute_config;
+	if (HAS_PCH_SPLIT(dev_priv)) {
+		intel_encoder->disable = pch_disable_hdmi;
+		intel_encoder->post_disable = pch_post_disable_hdmi;
+	} else {
+		intel_encoder->disable = g4x_disable_hdmi;
+	}
+	intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
+	intel_encoder->get_config = intel_hdmi_get_config;
+	if (IS_CHERRYVIEW(dev_priv)) {
+		intel_encoder->pre_pll_enable = chv_hdmi_pre_pll_enable;
+		intel_encoder->pre_enable = chv_hdmi_pre_enable;
+		intel_encoder->enable = vlv_enable_hdmi;
+		intel_encoder->post_disable = chv_hdmi_post_disable;
+		intel_encoder->post_pll_disable = chv_hdmi_post_pll_disable;
+	} else if (IS_VALLEYVIEW(dev_priv)) {
+		intel_encoder->pre_pll_enable = vlv_hdmi_pre_pll_enable;
+		intel_encoder->pre_enable = vlv_hdmi_pre_enable;
+		intel_encoder->enable = vlv_enable_hdmi;
+		intel_encoder->post_disable = vlv_hdmi_post_disable;
+	} else {
+		intel_encoder->pre_enable = intel_hdmi_pre_enable;
+		if (HAS_PCH_CPT(dev_priv))
+			intel_encoder->enable = cpt_enable_hdmi;
+		else if (HAS_PCH_IBX(dev_priv))
+			intel_encoder->enable = ibx_enable_hdmi;
+		else
+			intel_encoder->enable = g4x_enable_hdmi;
+	}
+	intel_encoder->shutdown = intel_hdmi_encoder_shutdown;
+
+	intel_encoder->type = INTEL_OUTPUT_HDMI;
+	intel_encoder->power_domain = intel_display_power_ddi_lanes_domain(dev_priv, port);
+	intel_encoder->port = port;
+	if (IS_CHERRYVIEW(dev_priv)) {
+		if (port == PORT_D)
+			intel_encoder->pipe_mask = BIT(PIPE_C);
+		else
+			intel_encoder->pipe_mask = BIT(PIPE_A) | BIT(PIPE_B);
+	} else {
+		intel_encoder->pipe_mask = ~0;
+	}
+	intel_encoder->cloneable = BIT(INTEL_OUTPUT_ANALOG);
+	intel_encoder->hpd_pin = intel_hpd_pin_default(dev_priv, port);
+	/*
+	 * BSpec is unclear about HDMI+HDMI cloning on g4x, but it seems
+	 * to work on real hardware. And since g4x can send infoframes to
+	 * only one port anyway, nothing is lost by allowing it.
+	 */
+	if (IS_G4X(dev_priv))
+		intel_encoder->cloneable |= BIT(INTEL_OUTPUT_HDMI);
+
+	dig_port->hdmi.hdmi_reg = hdmi_reg;
+	dig_port->dp.output_reg = INVALID_MMIO_REG;
+	dig_port->max_lanes = 4;
+
+	intel_infoframe_init(dig_port);
+
+	dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port);
+	intel_hdmi_init_connector(dig_port, intel_connector);
+}