Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 280 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_mg_phy_regs.h b/drivers/gpu/drm/i915/display/intel_mg_phy_regs.h
new file mode 100644
index 000000000..0e8248bce
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_mg_phy_regs.h
@@ -0,0 +1,280 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __INTEL_MG_PHY_REGS__
+#define __INTEL_MG_PHY_REGS__
+
+#include "intel_display_reg_defs.h"
+
+#define MG_PHY_PORT_LN(ln, tc_port, ln0p1, ln0p2, ln1p1) \
+	_MMIO(_PORT(tc_port, ln0p1, ln0p2) + (ln) * ((ln1p1) - (ln0p1)))
+
+#define MG_TX_LINK_PARAMS_TX1LN0_PORT1		0x16812C
+#define MG_TX_LINK_PARAMS_TX1LN1_PORT1		0x16852C
+#define MG_TX_LINK_PARAMS_TX1LN0_PORT2		0x16912C
+#define MG_TX_LINK_PARAMS_TX1LN1_PORT2		0x16952C
+#define MG_TX1_LINK_PARAMS(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_LINK_PARAMS_TX1LN0_PORT1, \
+		       MG_TX_LINK_PARAMS_TX1LN0_PORT2, \
+		       MG_TX_LINK_PARAMS_TX1LN1_PORT1)
+
+#define MG_TX_LINK_PARAMS_TX2LN0_PORT1		0x1680AC
+#define MG_TX_LINK_PARAMS_TX2LN1_PORT1		0x1684AC
+#define MG_TX_LINK_PARAMS_TX2LN0_PORT2		0x1690AC
+#define MG_TX_LINK_PARAMS_TX2LN1_PORT2		0x1694AC
+#define MG_TX2_LINK_PARAMS(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_LINK_PARAMS_TX2LN0_PORT1, \
+		       MG_TX_LINK_PARAMS_TX2LN0_PORT2, \
+		       MG_TX_LINK_PARAMS_TX2LN1_PORT1)
+#define   CRI_USE_FS32			(1 << 5)
+
+#define MG_TX_PISO_READLOAD_TX1LN0_PORT1		0x16814C
+#define MG_TX_PISO_READLOAD_TX1LN1_PORT1		0x16854C
+#define MG_TX_PISO_READLOAD_TX1LN0_PORT2		0x16914C
+#define MG_TX_PISO_READLOAD_TX1LN1_PORT2		0x16954C
+#define MG_TX1_PISO_READLOAD(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_PISO_READLOAD_TX1LN0_PORT1, \
+		       MG_TX_PISO_READLOAD_TX1LN0_PORT2, \
+		       MG_TX_PISO_READLOAD_TX1LN1_PORT1)
+
+#define MG_TX_PISO_READLOAD_TX2LN0_PORT1		0x1680CC
+#define MG_TX_PISO_READLOAD_TX2LN1_PORT1		0x1684CC
+#define MG_TX_PISO_READLOAD_TX2LN0_PORT2		0x1690CC
+#define MG_TX_PISO_READLOAD_TX2LN1_PORT2		0x1694CC
+#define MG_TX2_PISO_READLOAD(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_PISO_READLOAD_TX2LN0_PORT1, \
+		       MG_TX_PISO_READLOAD_TX2LN0_PORT2, \
+		       MG_TX_PISO_READLOAD_TX2LN1_PORT1)
+#define   CRI_CALCINIT					(1 << 1)
+
+#define MG_TX_SWINGCTRL_TX1LN0_PORT1		0x168148
+#define MG_TX_SWINGCTRL_TX1LN1_PORT1		0x168548
+#define MG_TX_SWINGCTRL_TX1LN0_PORT2		0x169148
+#define MG_TX_SWINGCTRL_TX1LN1_PORT2		0x169548
+#define MG_TX1_SWINGCTRL(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_SWINGCTRL_TX1LN0_PORT1, \
+		       MG_TX_SWINGCTRL_TX1LN0_PORT2, \
+		       MG_TX_SWINGCTRL_TX1LN1_PORT1)
+
+#define MG_TX_SWINGCTRL_TX2LN0_PORT1		0x1680C8
+#define MG_TX_SWINGCTRL_TX2LN1_PORT1		0x1684C8
+#define MG_TX_SWINGCTRL_TX2LN0_PORT2		0x1690C8
+#define MG_TX_SWINGCTRL_TX2LN1_PORT2		0x1694C8
+#define MG_TX2_SWINGCTRL(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_SWINGCTRL_TX2LN0_PORT1, \
+		       MG_TX_SWINGCTRL_TX2LN0_PORT2, \
+		       MG_TX_SWINGCTRL_TX2LN1_PORT1)
+#define   CRI_TXDEEMPH_OVERRIDE_17_12(x)		((x) << 0)
+#define   CRI_TXDEEMPH_OVERRIDE_17_12_MASK		(0x3F << 0)
+
+#define MG_TX_DRVCTRL_TX1LN0_TXPORT1			0x168144
+#define MG_TX_DRVCTRL_TX1LN1_TXPORT1			0x168544
+#define MG_TX_DRVCTRL_TX1LN0_TXPORT2			0x169144
+#define MG_TX_DRVCTRL_TX1LN1_TXPORT2			0x169544
+#define MG_TX_DRVCTRL_TX1LN0_TXPORT3			0x16A144
+#define MG_TX_DRVCTRL_TX1LN1_TXPORT3			0x16A544
+#define MG_TX_DRVCTRL_TX1LN0_TXPORT4			0x16B144
+#define MG_TX_DRVCTRL_TX1LN1_TXPORT4			0x16B544
+#define MG_TX1_DRVCTRL(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_DRVCTRL_TX1LN0_TXPORT1, \
+		       MG_TX_DRVCTRL_TX1LN0_TXPORT2, \
+		       MG_TX_DRVCTRL_TX1LN1_TXPORT1)
+
+#define MG_TX_DRVCTRL_TX2LN0_PORT1			0x1680C4
+#define MG_TX_DRVCTRL_TX2LN1_PORT1			0x1684C4
+#define MG_TX_DRVCTRL_TX2LN0_PORT2			0x1690C4
+#define MG_TX_DRVCTRL_TX2LN1_PORT2			0x1694C4
+#define MG_TX2_DRVCTRL(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_DRVCTRL_TX2LN0_PORT1, \
+		       MG_TX_DRVCTRL_TX2LN0_PORT2, \
+		       MG_TX_DRVCTRL_TX2LN1_PORT1)
+#define   CRI_TXDEEMPH_OVERRIDE_11_6(x)			((x) << 24)
+#define   CRI_TXDEEMPH_OVERRIDE_11_6_MASK		(0x3F << 24)
+#define   CRI_TXDEEMPH_OVERRIDE_EN			(1 << 22)
+#define   CRI_TXDEEMPH_OVERRIDE_5_0(x)			((x) << 16)
+#define   CRI_TXDEEMPH_OVERRIDE_5_0_MASK		(0x3F << 16)
+#define   CRI_LOADGEN_SEL(x)				((x) << 12)
+#define   CRI_LOADGEN_SEL_MASK				(0x3 << 12)
+
+#define MG_CLKHUB_LN0_PORT1			0x16839C
+#define MG_CLKHUB_LN1_PORT1			0x16879C
+#define MG_CLKHUB_LN0_PORT2			0x16939C
+#define MG_CLKHUB_LN1_PORT2			0x16979C
+#define MG_CLKHUB(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_CLKHUB_LN0_PORT1, \
+		       MG_CLKHUB_LN0_PORT2, \
+		       MG_CLKHUB_LN1_PORT1)
+#define   CFG_LOW_RATE_LKREN_EN				(1 << 11)
+
+#define MG_TX_DCC_TX1LN0_PORT1			0x168110
+#define MG_TX_DCC_TX1LN1_PORT1			0x168510
+#define MG_TX_DCC_TX1LN0_PORT2			0x169110
+#define MG_TX_DCC_TX1LN1_PORT2			0x169510
+#define MG_TX1_DCC(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_DCC_TX1LN0_PORT1, \
+		       MG_TX_DCC_TX1LN0_PORT2, \
+		       MG_TX_DCC_TX1LN1_PORT1)
+#define MG_TX_DCC_TX2LN0_PORT1			0x168090
+#define MG_TX_DCC_TX2LN1_PORT1			0x168490
+#define MG_TX_DCC_TX2LN0_PORT2			0x169090
+#define MG_TX_DCC_TX2LN1_PORT2			0x169490
+#define MG_TX2_DCC(ln, tc_port) \
+	MG_PHY_PORT_LN(ln, tc_port, MG_TX_DCC_TX2LN0_PORT1, \
+		       MG_TX_DCC_TX2LN0_PORT2, \
+		       MG_TX_DCC_TX2LN1_PORT1)
+#define   CFG_AMI_CK_DIV_OVERRIDE_VAL(x)	((x) << 25)
+#define   CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK	(0x3 << 25)
+#define   CFG_AMI_CK_DIV_OVERRIDE_EN		(1 << 24)
+
+#define MG_DP_MODE_LN0_ACU_PORT1			0x1683A0
+#define MG_DP_MODE_LN1_ACU_PORT1			0x1687A0
+#define MG_DP_MODE_LN0_ACU_PORT2			0x1693A0
+#define MG_DP_MODE_LN1_ACU_PORT2			0x1697A0
+#define MG_DP_MODE(ln, tc_port)	\
+	MG_PHY_PORT_LN(ln, tc_port, MG_DP_MODE_LN0_ACU_PORT1, \
+		       MG_DP_MODE_LN0_ACU_PORT2, \
+		       MG_DP_MODE_LN1_ACU_PORT1)
+#define   MG_DP_MODE_CFG_DP_X2_MODE			(1 << 7)
+#define   MG_DP_MODE_CFG_DP_X1_MODE			(1 << 6)
+
+#define FIA1_BASE			0x163000
+#define FIA2_BASE			0x16E000
+#define FIA3_BASE			0x16F000
+#define _FIA(fia)			_PICK((fia), FIA1_BASE, FIA2_BASE, FIA3_BASE)
+#define _MMIO_FIA(fia, off)		_MMIO(_FIA(fia) + (off))
+
+/* ICL PHY DFLEX registers */
+#define PORT_TX_DFLEXDPMLE1(fia)		_MMIO_FIA((fia),  0x008C0)
+#define   DFLEXDPMLE1_DPMLETC_MASK(idx)		(0xf << (4 * (idx)))
+#define   DFLEXDPMLE1_DPMLETC_ML0(idx)		(1 << (4 * (idx)))
+#define   DFLEXDPMLE1_DPMLETC_ML1_0(idx)	(3 << (4 * (idx)))
+#define   DFLEXDPMLE1_DPMLETC_ML3(idx)		(8 << (4 * (idx)))
+#define   DFLEXDPMLE1_DPMLETC_ML3_2(idx)	(12 << (4 * (idx)))
+#define   DFLEXDPMLE1_DPMLETC_ML3_0(idx)	(15 << (4 * (idx)))
+
+#define _MG_REFCLKIN_CTL_PORT1				0x16892C
+#define _MG_REFCLKIN_CTL_PORT2				0x16992C
+#define   MG_REFCLKIN_CTL_OD_2_MUX(x)			((x) << 8)
+#define   MG_REFCLKIN_CTL_OD_2_MUX_MASK			(0x7 << 8)
+#define MG_REFCLKIN_CTL(tc_port) _MMIO_PORT((tc_port), \
+					    _MG_REFCLKIN_CTL_PORT1, \
+					    _MG_REFCLKIN_CTL_PORT2)
+
+#define _MG_CLKTOP2_CORECLKCTL1_PORT1			0x1688D8
+#define _MG_CLKTOP2_CORECLKCTL1_PORT2			0x1698D8
+#define   MG_CLKTOP2_CORECLKCTL1_B_DIVRATIO(x)		((x) << 16)
+#define   MG_CLKTOP2_CORECLKCTL1_B_DIVRATIO_MASK	(0xff << 16)
+#define   MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO(x)		((x) << 8)
+#define   MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK	(0xff << 8)
+#define MG_CLKTOP2_CORECLKCTL1(tc_port) _MMIO_PORT((tc_port), \
+						   _MG_CLKTOP2_CORECLKCTL1_PORT1, \
+						   _MG_CLKTOP2_CORECLKCTL1_PORT2)
+
+#define _MG_CLKTOP2_HSCLKCTL_PORT1			0x1688D4
+#define _MG_CLKTOP2_HSCLKCTL_PORT2			0x1698D4
+#define   MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL(x)		((x) << 16)
+#define   MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK	(0x1 << 16)
+#define   MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL(x)	((x) << 14)
+#define   MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK	(0x3 << 14)
+#define   MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK		(0x3 << 12)
+#define   MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_2		(0 << 12)
+#define   MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_3		(1 << 12)
+#define   MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_5		(2 << 12)
+#define   MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_7		(3 << 12)
+#define   MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO(x)		((x) << 8)
+#define   MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_SHIFT		8
+#define   MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK		(0xf << 8)
+#define MG_CLKTOP2_HSCLKCTL(tc_port) _MMIO_PORT((tc_port), \
+						_MG_CLKTOP2_HSCLKCTL_PORT1, \
+						_MG_CLKTOP2_HSCLKCTL_PORT2)
+
+#define _MG_PLL_DIV0_PORT1				0x168A00
+#define _MG_PLL_DIV0_PORT2				0x169A00
+#define   MG_PLL_DIV0_FRACNEN_H				(1 << 30)
+#define   MG_PLL_DIV0_FBDIV_FRAC_MASK			(0x3fffff << 8)
+#define   MG_PLL_DIV0_FBDIV_FRAC_SHIFT			8
+#define   MG_PLL_DIV0_FBDIV_FRAC(x)			((x) << 8)
+#define   MG_PLL_DIV0_FBDIV_INT_MASK			(0xff << 0)
+#define   MG_PLL_DIV0_FBDIV_INT(x)			((x) << 0)
+#define MG_PLL_DIV0(tc_port) _MMIO_PORT((tc_port), _MG_PLL_DIV0_PORT1, \
+					_MG_PLL_DIV0_PORT2)
+
+#define _MG_PLL_DIV1_PORT1				0x168A04
+#define _MG_PLL_DIV1_PORT2				0x169A04
+#define   MG_PLL_DIV1_IREF_NDIVRATIO(x)			((x) << 16)
+#define   MG_PLL_DIV1_DITHER_DIV_1			(0 << 12)
+#define   MG_PLL_DIV1_DITHER_DIV_2			(1 << 12)
+#define   MG_PLL_DIV1_DITHER_DIV_4			(2 << 12)
+#define   MG_PLL_DIV1_DITHER_DIV_8			(3 << 12)
+#define   MG_PLL_DIV1_NDIVRATIO(x)			((x) << 4)
+#define   MG_PLL_DIV1_FBPREDIV_MASK			(0xf << 0)
+#define   MG_PLL_DIV1_FBPREDIV(x)			((x) << 0)
+#define MG_PLL_DIV1(tc_port) _MMIO_PORT((tc_port), _MG_PLL_DIV1_PORT1, \
+					_MG_PLL_DIV1_PORT2)
+
+#define _MG_PLL_LF_PORT1				0x168A08
+#define _MG_PLL_LF_PORT2				0x169A08
+#define   MG_PLL_LF_TDCTARGETCNT(x)			((x) << 24)
+#define   MG_PLL_LF_AFCCNTSEL_256			(0 << 20)
+#define   MG_PLL_LF_AFCCNTSEL_512			(1 << 20)
+#define   MG_PLL_LF_GAINCTRL(x)				((x) << 16)
+#define   MG_PLL_LF_INT_COEFF(x)			((x) << 8)
+#define   MG_PLL_LF_PROP_COEFF(x)			((x) << 0)
+#define MG_PLL_LF(tc_port) _MMIO_PORT((tc_port), _MG_PLL_LF_PORT1, \
+				      _MG_PLL_LF_PORT2)
+
+#define _MG_PLL_FRAC_LOCK_PORT1				0x168A0C
+#define _MG_PLL_FRAC_LOCK_PORT2				0x169A0C
+#define   MG_PLL_FRAC_LOCK_TRUELOCK_CRIT_32		(1 << 18)
+#define   MG_PLL_FRAC_LOCK_EARLYLOCK_CRIT_32		(1 << 16)
+#define   MG_PLL_FRAC_LOCK_LOCKTHRESH(x)		((x) << 11)
+#define   MG_PLL_FRAC_LOCK_DCODITHEREN			(1 << 10)
+#define   MG_PLL_FRAC_LOCK_FEEDFWRDCAL_EN		(1 << 8)
+#define   MG_PLL_FRAC_LOCK_FEEDFWRDGAIN(x)		((x) << 0)
+#define MG_PLL_FRAC_LOCK(tc_port) _MMIO_PORT((tc_port), \
+					     _MG_PLL_FRAC_LOCK_PORT1, \
+					     _MG_PLL_FRAC_LOCK_PORT2)
+
+#define _MG_PLL_SSC_PORT1				0x168A10
+#define _MG_PLL_SSC_PORT2				0x169A10
+#define   MG_PLL_SSC_EN					(1 << 28)
+#define   MG_PLL_SSC_TYPE(x)				((x) << 26)
+#define   MG_PLL_SSC_STEPLENGTH(x)			((x) << 16)
+#define   MG_PLL_SSC_STEPNUM(x)				((x) << 10)
+#define   MG_PLL_SSC_FLLEN				(1 << 9)
+#define   MG_PLL_SSC_STEPSIZE(x)			((x) << 0)
+#define MG_PLL_SSC(tc_port) _MMIO_PORT((tc_port), _MG_PLL_SSC_PORT1, \
+				       _MG_PLL_SSC_PORT2)
+
+#define _MG_PLL_BIAS_PORT1				0x168A14
+#define _MG_PLL_BIAS_PORT2				0x169A14
+#define   MG_PLL_BIAS_BIAS_GB_SEL(x)			((x) << 30)
+#define   MG_PLL_BIAS_BIAS_GB_SEL_MASK			(0x3 << 30)
+#define   MG_PLL_BIAS_INIT_DCOAMP(x)			((x) << 24)
+#define   MG_PLL_BIAS_INIT_DCOAMP_MASK			(0x3f << 24)
+#define   MG_PLL_BIAS_BIAS_BONUS(x)			((x) << 16)
+#define   MG_PLL_BIAS_BIAS_BONUS_MASK			(0xff << 16)
+#define   MG_PLL_BIAS_BIASCAL_EN			(1 << 15)
+#define   MG_PLL_BIAS_CTRIM(x)				((x) << 8)
+#define   MG_PLL_BIAS_CTRIM_MASK			(0x1f << 8)
+#define   MG_PLL_BIAS_VREF_RDAC(x)			((x) << 5)
+#define   MG_PLL_BIAS_VREF_RDAC_MASK			(0x7 << 5)
+#define   MG_PLL_BIAS_IREFTRIM(x)			((x) << 0)
+#define   MG_PLL_BIAS_IREFTRIM_MASK			(0x1f << 0)
+#define MG_PLL_BIAS(tc_port) _MMIO_PORT((tc_port), _MG_PLL_BIAS_PORT1, \
+					_MG_PLL_BIAS_PORT2)
+
+#define _MG_PLL_TDC_COLDST_BIAS_PORT1			0x168A18
+#define _MG_PLL_TDC_COLDST_BIAS_PORT2			0x169A18
+#define   MG_PLL_TDC_COLDST_IREFINT_EN			(1 << 27)
+#define   MG_PLL_TDC_COLDST_REFBIAS_START_PULSE_W(x)	((x) << 17)
+#define   MG_PLL_TDC_COLDST_COLDSTART			(1 << 16)
+#define   MG_PLL_TDC_TDCOVCCORR_EN			(1 << 2)
+#define   MG_PLL_TDC_TDCSEL(x)				((x) << 0)
+#define MG_PLL_TDC_COLDST_BIAS(tc_port) _MMIO_PORT((tc_port), \
+						   _MG_PLL_TDC_COLDST_BIAS_PORT1, \
+						   _MG_PLL_TDC_COLDST_BIAS_PORT2)
+
+#endif /* __INTEL_MG_PHY_REGS__ */