Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 462 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/gt/intel_gpu_commands.h b/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
new file mode 100644
index 000000000..f50ea9291
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
@@ -0,0 +1,462 @@
+/* SPDX-License-Identifier: MIT*/
+/*
+ * Copyright © 2003-2018 Intel Corporation
+ */
+
+#ifndef _INTEL_GPU_COMMANDS_H_
+#define _INTEL_GPU_COMMANDS_H_
+
+#include <linux/bitops.h>
+
+/*
+ * Target address alignments required for GPU access e.g.
+ * MI_STORE_DWORD_IMM.
+ */
+#define alignof_dword 4
+#define alignof_qword 8
+
+/*
+ * Instruction field definitions used by the command parser
+ */
+#define INSTR_CLIENT_SHIFT      29
+#define   INSTR_MI_CLIENT       0x0
+#define   INSTR_BC_CLIENT       0x2
+#define   INSTR_RC_CLIENT       0x3
+#define INSTR_SUBCLIENT_SHIFT   27
+#define INSTR_SUBCLIENT_MASK    0x18000000
+#define   INSTR_MEDIA_SUBCLIENT 0x2
+#define INSTR_26_TO_24_MASK	0x7000000
+#define   INSTR_26_TO_24_SHIFT	24
+
+#define __INSTR(client) ((client) << INSTR_CLIENT_SHIFT)
+
+/*
+ * Memory interface instructions used by the kernel
+ */
+#define MI_INSTR(opcode, flags) \
+	(__INSTR(INSTR_MI_CLIENT) | (opcode) << 23 | (flags))
+/* Many MI commands use bit 22 of the header dword for GGTT vs PPGTT */
+#define  MI_GLOBAL_GTT    (1<<22)
+
+#define MI_NOOP			MI_INSTR(0, 0)
+#define MI_SET_PREDICATE	MI_INSTR(0x01, 0)
+#define   MI_SET_PREDICATE_DISABLE	(0 << 0)
+#define MI_USER_INTERRUPT	MI_INSTR(0x02, 0)
+#define MI_WAIT_FOR_EVENT       MI_INSTR(0x03, 0)
+#define   MI_WAIT_FOR_OVERLAY_FLIP	(1<<16)
+#define   MI_WAIT_FOR_PLANE_B_FLIP      (1<<6)
+#define   MI_WAIT_FOR_PLANE_A_FLIP      (1<<2)
+#define   MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
+#define MI_FLUSH		MI_INSTR(0x04, 0)
+#define   MI_READ_FLUSH		(1 << 0)
+#define   MI_EXE_FLUSH		(1 << 1)
+#define   MI_NO_WRITE_FLUSH	(1 << 2)
+#define   MI_SCENE_COUNT	(1 << 3) /* just increment scene count */
+#define   MI_END_SCENE		(1 << 4) /* flush binner and incr scene count */
+#define   MI_INVALIDATE_ISP	(1 << 5) /* invalidate indirect state pointers */
+#define MI_REPORT_HEAD		MI_INSTR(0x07, 0)
+#define MI_ARB_ON_OFF		MI_INSTR(0x08, 0)
+#define   MI_ARB_ENABLE			(1<<0)
+#define   MI_ARB_DISABLE		(0<<0)
+#define MI_BATCH_BUFFER_END	MI_INSTR(0x0a, 0)
+#define MI_SUSPEND_FLUSH	MI_INSTR(0x0b, 0)
+#define   MI_SUSPEND_FLUSH_EN	(1<<0)
+#define MI_SET_APPID		MI_INSTR(0x0e, 0)
+#define   MI_SET_APPID_SESSION_ID(x)	((x) << 0)
+#define MI_OVERLAY_FLIP		MI_INSTR(0x11, 0)
+#define   MI_OVERLAY_CONTINUE	(0x0<<21)
+#define   MI_OVERLAY_ON		(0x1<<21)
+#define   MI_OVERLAY_OFF	(0x2<<21)
+#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
+#define MI_DISPLAY_FLIP		MI_INSTR(0x14, 2)
+#define MI_DISPLAY_FLIP_I915	MI_INSTR(0x14, 1)
+#define   MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
+/* IVB has funny definitions for which plane to flip. */
+#define   MI_DISPLAY_FLIP_IVB_PLANE_A  (0 << 19)
+#define   MI_DISPLAY_FLIP_IVB_PLANE_B  (1 << 19)
+#define   MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19)
+#define   MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
+#define   MI_DISPLAY_FLIP_IVB_PLANE_C  (4 << 19)
+#define   MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
+/* SKL ones */
+#define   MI_DISPLAY_FLIP_SKL_PLANE_1_A	(0 << 8)
+#define   MI_DISPLAY_FLIP_SKL_PLANE_1_B	(1 << 8)
+#define   MI_DISPLAY_FLIP_SKL_PLANE_1_C	(2 << 8)
+#define   MI_DISPLAY_FLIP_SKL_PLANE_2_A	(4 << 8)
+#define   MI_DISPLAY_FLIP_SKL_PLANE_2_B	(5 << 8)
+#define   MI_DISPLAY_FLIP_SKL_PLANE_2_C	(6 << 8)
+#define   MI_DISPLAY_FLIP_SKL_PLANE_3_A	(7 << 8)
+#define   MI_DISPLAY_FLIP_SKL_PLANE_3_B	(8 << 8)
+#define   MI_DISPLAY_FLIP_SKL_PLANE_3_C	(9 << 8)
+#define MI_SEMAPHORE_MBOX	MI_INSTR(0x16, 1) /* gen6, gen7 */
+#define   MI_SEMAPHORE_GLOBAL_GTT    (1<<22)
+#define   MI_SEMAPHORE_UPDATE	    (1<<21)
+#define   MI_SEMAPHORE_COMPARE	    (1<<20)
+#define   MI_SEMAPHORE_REGISTER	    (1<<18)
+#define   MI_SEMAPHORE_SYNC_VR	    (0<<16) /* RCS  wait for VCS  (RVSYNC) */
+#define   MI_SEMAPHORE_SYNC_VER	    (1<<16) /* RCS  wait for VECS (RVESYNC) */
+#define   MI_SEMAPHORE_SYNC_BR	    (2<<16) /* RCS  wait for BCS  (RBSYNC) */
+#define   MI_SEMAPHORE_SYNC_BV	    (0<<16) /* VCS  wait for BCS  (VBSYNC) */
+#define   MI_SEMAPHORE_SYNC_VEV	    (1<<16) /* VCS  wait for VECS (VVESYNC) */
+#define   MI_SEMAPHORE_SYNC_RV	    (2<<16) /* VCS  wait for RCS  (VRSYNC) */
+#define   MI_SEMAPHORE_SYNC_RB	    (0<<16) /* BCS  wait for RCS  (BRSYNC) */
+#define   MI_SEMAPHORE_SYNC_VEB	    (1<<16) /* BCS  wait for VECS (BVESYNC) */
+#define   MI_SEMAPHORE_SYNC_VB	    (2<<16) /* BCS  wait for VCS  (BVSYNC) */
+#define   MI_SEMAPHORE_SYNC_BVE	    (0<<16) /* VECS wait for BCS  (VEBSYNC) */
+#define   MI_SEMAPHORE_SYNC_VVE	    (1<<16) /* VECS wait for VCS  (VEVSYNC) */
+#define   MI_SEMAPHORE_SYNC_RVE	    (2<<16) /* VECS wait for RCS  (VERSYNC) */
+#define   MI_SEMAPHORE_SYNC_INVALID (3<<16)
+#define   MI_SEMAPHORE_SYNC_MASK    (3<<16)
+#define MI_SET_CONTEXT		MI_INSTR(0x18, 0)
+#define   MI_MM_SPACE_GTT		(1<<8)
+#define   MI_MM_SPACE_PHYSICAL		(0<<8)
+#define   MI_SAVE_EXT_STATE_EN		(1<<3)
+#define   MI_RESTORE_EXT_STATE_EN	(1<<2)
+#define   MI_FORCE_RESTORE		(1<<1)
+#define   MI_RESTORE_INHIBIT		(1<<0)
+#define   HSW_MI_RS_SAVE_STATE_EN       (1<<3)
+#define   HSW_MI_RS_RESTORE_STATE_EN    (1<<2)
+#define MI_SEMAPHORE_SIGNAL	MI_INSTR(0x1b, 0) /* GEN8+ */
+#define   MI_SEMAPHORE_TARGET(engine)	((engine)<<15)
+#define MI_SEMAPHORE_WAIT	MI_INSTR(0x1c, 2) /* GEN8+ */
+#define MI_SEMAPHORE_WAIT_TOKEN	MI_INSTR(0x1c, 3) /* GEN12+ */
+#define   MI_SEMAPHORE_POLL		(1 << 15)
+#define   MI_SEMAPHORE_SAD_GT_SDD	(0 << 12)
+#define   MI_SEMAPHORE_SAD_GTE_SDD	(1 << 12)
+#define   MI_SEMAPHORE_SAD_LT_SDD	(2 << 12)
+#define   MI_SEMAPHORE_SAD_LTE_SDD	(3 << 12)
+#define   MI_SEMAPHORE_SAD_EQ_SDD	(4 << 12)
+#define   MI_SEMAPHORE_SAD_NEQ_SDD	(5 << 12)
+#define   MI_SEMAPHORE_TOKEN_MASK	REG_GENMASK(9, 5)
+#define   MI_SEMAPHORE_TOKEN_SHIFT	5
+#define MI_STORE_DATA_IMM	MI_INSTR(0x20, 0)
+#define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
+#define MI_STORE_DWORD_IMM_GEN4	MI_INSTR(0x20, 2)
+#define MI_STORE_QWORD_IMM_GEN8 (MI_INSTR(0x20, 3) | REG_BIT(21))
+#define   MI_MEM_VIRTUAL	(1 << 22) /* 945,g33,965 */
+#define   MI_USE_GGTT		(1 << 22) /* g4x+ */
+#define MI_STORE_DWORD_INDEX	MI_INSTR(0x21, 1)
+#define MI_ATOMIC		MI_INSTR(0x2f, 1)
+#define MI_ATOMIC_INLINE	(MI_INSTR(0x2f, 9) | MI_ATOMIC_INLINE_DATA)
+#define   MI_ATOMIC_GLOBAL_GTT		(1 << 22)
+#define   MI_ATOMIC_INLINE_DATA		(1 << 18)
+#define   MI_ATOMIC_CS_STALL		(1 << 17)
+#define	  MI_ATOMIC_MOVE		(0x4 << 8)
+
+/*
+ * Official intel docs are somewhat sloppy concerning MI_LOAD_REGISTER_IMM:
+ * - Always issue a MI_NOOP _before_ the MI_LOAD_REGISTER_IMM - otherwise hw
+ *   simply ignores the register load under certain conditions.
+ * - One can actually load arbitrary many arbitrary registers: Simply issue x
+ *   address/value pairs. Don't overdue it, though, x <= 2^4 must hold!
+ */
+#define MI_LOAD_REGISTER_IMM(x)	MI_INSTR(0x22, 2*(x)-1)
+/* Gen11+. addr = base + (ctx_restore ? offset & GENMASK(12,2) : offset) */
+#define   MI_LRI_LRM_CS_MMIO		REG_BIT(19)
+#define   MI_LRI_MMIO_REMAP_EN		REG_BIT(17)
+#define   MI_LRI_FORCE_POSTED		(1<<12)
+#define MI_LOAD_REGISTER_IMM_MAX_REGS (126)
+#define MI_STORE_REGISTER_MEM        MI_INSTR(0x24, 1)
+#define MI_STORE_REGISTER_MEM_GEN8   MI_INSTR(0x24, 2)
+#define   MI_SRM_LRM_GLOBAL_GTT		(1<<22)
+#define MI_FLUSH_DW		MI_INSTR(0x26, 1) /* for GEN6 */
+#define   MI_FLUSH_DW_PROTECTED_MEM_EN	(1 << 22)
+#define   MI_FLUSH_DW_STORE_INDEX	(1<<21)
+#define   MI_INVALIDATE_TLB		(1<<18)
+#define   MI_FLUSH_DW_CCS		(1<<16)
+#define   MI_FLUSH_DW_OP_STOREDW	(1<<14)
+#define   MI_FLUSH_DW_OP_MASK		(3<<14)
+#define   MI_FLUSH_DW_LLC		(1<<9)
+#define   MI_FLUSH_DW_NOTIFY		(1<<8)
+#define   MI_INVALIDATE_BSD		(1<<7)
+#define   MI_FLUSH_DW_USE_GTT		(1<<2)
+#define   MI_FLUSH_DW_USE_PPGTT		(0<<2)
+#define MI_LOAD_REGISTER_MEM	   MI_INSTR(0x29, 1)
+#define MI_LOAD_REGISTER_MEM_GEN8  MI_INSTR(0x29, 2)
+#define MI_LOAD_REGISTER_REG    MI_INSTR(0x2A, 1)
+#define   MI_LRR_SOURCE_CS_MMIO		REG_BIT(18)
+#define MI_BATCH_BUFFER		MI_INSTR(0x30, 1)
+#define   MI_BATCH_NON_SECURE		(1)
+/* for snb/ivb/vlv this also means "batch in ppgtt" when ppgtt is enabled. */
+#define   MI_BATCH_NON_SECURE_I965	(1<<8)
+#define   MI_BATCH_PPGTT_HSW		(1<<8)
+#define   MI_BATCH_NON_SECURE_HSW	(1<<13)
+#define MI_BATCH_BUFFER_START	MI_INSTR(0x31, 0)
+#define   MI_BATCH_GTT		    (2<<6) /* aliased with (1<<7) on gen4 */
+#define MI_BATCH_BUFFER_START_GEN8	MI_INSTR(0x31, 1)
+#define   MI_BATCH_RESOURCE_STREAMER REG_BIT(10)
+#define   MI_BATCH_PREDICATE         REG_BIT(15) /* HSW+ on RCS only*/
+
+#define MI_OPCODE(x)		(((x) >> 23) & 0x3f)
+#define IS_MI_LRI_CMD(x)	(MI_OPCODE(x) == MI_OPCODE(MI_INSTR(0x22, 0)))
+#define MI_LRI_LEN(x)		(((x) & 0xff) + 1)
+
+/*
+ * 3D instructions used by the kernel
+ */
+#define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags))
+
+#define GEN9_MEDIA_POOL_STATE     ((0x3 << 29) | (0x2 << 27) | (0x5 << 16) | 4)
+#define   GEN9_MEDIA_POOL_ENABLE  (1 << 31)
+#define GFX_OP_RASTER_RULES    ((0x3<<29)|(0x7<<24))
+#define GFX_OP_SCISSOR         ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define   SC_UPDATE_SCISSOR       (0x1<<1)
+#define   SC_ENABLE_MASK          (0x1<<0)
+#define   SC_ENABLE               (0x1<<0)
+#define GFX_OP_LOAD_INDIRECT   ((0x3<<29)|(0x1d<<24)|(0x7<<16))
+#define GFX_OP_SCISSOR_INFO    ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
+#define   SCI_YMIN_MASK      (0xffff<<16)
+#define   SCI_XMIN_MASK      (0xffff<<0)
+#define   SCI_YMAX_MASK      (0xffff<<16)
+#define   SCI_XMAX_MASK      (0xffff<<0)
+#define GFX_OP_SCISSOR_ENABLE	 ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define GFX_OP_SCISSOR_RECT	 ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
+#define GFX_OP_COLOR_FACTOR      ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
+#define GFX_OP_STIPPLE           ((0x3<<29)|(0x1d<<24)|(0x83<<16))
+#define GFX_OP_MAP_INFO          ((0x3<<29)|(0x1d<<24)|0x4)
+#define GFX_OP_DESTBUFFER_VARS   ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
+#define GFX_OP_DESTBUFFER_INFO	 ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1)
+#define GFX_OP_DRAWRECT_INFO     ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
+#define GFX_OP_DRAWRECT_INFO_I965  ((0x7900<<16)|0x2)
+
+#define XY_CTRL_SURF_INSTR_SIZE		5
+#define MI_FLUSH_DW_SIZE		3
+#define XY_CTRL_SURF_COPY_BLT		((2 << 29) | (0x48 << 22) | 3)
+#define   SRC_ACCESS_TYPE_SHIFT		21
+#define   DST_ACCESS_TYPE_SHIFT		20
+#define   CCS_SIZE_MASK			0x3FF
+#define   CCS_SIZE_SHIFT		8
+#define   XY_CTRL_SURF_MOCS_MASK	GENMASK(31, 25)
+#define   NUM_CCS_BYTES_PER_BLOCK	256
+#define   NUM_BYTES_PER_CCS_BYTE	256
+#define   NUM_CCS_BLKS_PER_XFER		1024
+#define   INDIRECT_ACCESS		0
+#define   DIRECT_ACCESS			1
+
+#define COLOR_BLT_CMD			(2 << 29 | 0x40 << 22 | (5 - 2))
+#define XY_COLOR_BLT_CMD		(2 << 29 | 0x50 << 22)
+#define XY_FAST_COLOR_BLT_CMD		(2 << 29 | 0x44 << 22)
+#define   XY_FAST_COLOR_BLT_DEPTH_32	(2 << 19)
+#define   XY_FAST_COLOR_BLT_DW		16
+#define   XY_FAST_COLOR_BLT_MOCS_MASK	GENMASK(27, 21)
+#define   XY_FAST_COLOR_BLT_MEM_TYPE_SHIFT 31
+
+#define   XY_FAST_COPY_BLT_D0_SRC_TILING_MASK     REG_GENMASK(21, 20)
+#define   XY_FAST_COPY_BLT_D0_DST_TILING_MASK     REG_GENMASK(14, 13)
+#define   XY_FAST_COPY_BLT_D0_SRC_TILE_MODE(mode)  \
+	REG_FIELD_PREP(XY_FAST_COPY_BLT_D0_SRC_TILING_MASK, mode)
+#define   XY_FAST_COPY_BLT_D0_DST_TILE_MODE(mode)  \
+	REG_FIELD_PREP(XY_FAST_COPY_BLT_D0_DST_TILING_MASK, mode)
+#define     LINEAR				0
+#define     TILE_X				0x1
+#define     XMAJOR				0x1
+#define     YMAJOR				0x2
+#define     TILE_64			0x3
+#define   XY_FAST_COPY_BLT_D1_SRC_TILE4	REG_BIT(31)
+#define   XY_FAST_COPY_BLT_D1_DST_TILE4	REG_BIT(30)
+#define BLIT_CCTL_SRC_MOCS_MASK  REG_GENMASK(6, 0)
+#define BLIT_CCTL_DST_MOCS_MASK  REG_GENMASK(14, 8)
+/* Note:  MOCS value = (index << 1) */
+#define BLIT_CCTL_SRC_MOCS(idx) \
+	REG_FIELD_PREP(BLIT_CCTL_SRC_MOCS_MASK, (idx) << 1)
+#define BLIT_CCTL_DST_MOCS(idx) \
+	REG_FIELD_PREP(BLIT_CCTL_DST_MOCS_MASK, (idx) << 1)
+
+#define SRC_COPY_BLT_CMD		(2 << 29 | 0x43 << 22)
+#define GEN9_XY_FAST_COPY_BLT_CMD	(2 << 29 | 0x42 << 22)
+#define XY_SRC_COPY_BLT_CMD		(2 << 29 | 0x53 << 22)
+#define XY_MONO_SRC_COPY_IMM_BLT	(2 << 29 | 0x71 << 22 | 5)
+#define   BLT_WRITE_A			(2<<20)
+#define   BLT_WRITE_RGB			(1<<20)
+#define   BLT_WRITE_RGBA		(BLT_WRITE_RGB | BLT_WRITE_A)
+#define   BLT_DEPTH_8			(0<<24)
+#define   BLT_DEPTH_16_565		(1<<24)
+#define   BLT_DEPTH_16_1555		(2<<24)
+#define   BLT_DEPTH_32			(3<<24)
+#define   BLT_ROP_SRC_COPY		(0xcc<<16)
+#define   BLT_ROP_COLOR_COPY		(0xf0<<16)
+#define XY_SRC_COPY_BLT_SRC_TILED	(1<<15) /* 965+ only */
+#define XY_SRC_COPY_BLT_DST_TILED	(1<<11) /* 965+ only */
+#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
+#define   ASYNC_FLIP                (1<<22)
+#define   DISPLAY_PLANE_A           (0<<20)
+#define   DISPLAY_PLANE_B           (1<<20)
+#define GFX_OP_PIPE_CONTROL(len)	((0x3<<29)|(0x3<<27)|(0x2<<24)|((len)-2))
+#define   PIPE_CONTROL_COMMAND_CACHE_INVALIDATE		(1<<29) /* gen11+ */
+#define   PIPE_CONTROL_TILE_CACHE_FLUSH			(1<<28) /* gen11+ */
+#define   PIPE_CONTROL_FLUSH_L3				(1<<27)
+#define   PIPE_CONTROL_AMFS_FLUSH			(1<<25) /* gen12+ */
+#define   PIPE_CONTROL_GLOBAL_GTT_IVB			(1<<24) /* gen7+ */
+#define   PIPE_CONTROL_MMIO_WRITE			(1<<23)
+#define   PIPE_CONTROL_STORE_DATA_INDEX			(1<<21)
+#define   PIPE_CONTROL_CS_STALL				(1<<20)
+#define   PIPE_CONTROL_GLOBAL_SNAPSHOT_RESET		(1<<19)
+#define   PIPE_CONTROL_TLB_INVALIDATE			(1<<18)
+#define   PIPE_CONTROL_PSD_SYNC				(1<<17) /* gen11+ */
+#define   PIPE_CONTROL_MEDIA_STATE_CLEAR		(1<<16)
+#define   PIPE_CONTROL_WRITE_TIMESTAMP			(3<<14)
+#define   PIPE_CONTROL_QW_WRITE				(1<<14)
+#define   PIPE_CONTROL_POST_SYNC_OP_MASK                (3<<14)
+#define   PIPE_CONTROL_DEPTH_STALL			(1<<13)
+#define   PIPE_CONTROL_WRITE_FLUSH			(1<<12)
+#define   PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH	(1<<12) /* gen6+ */
+#define   PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE	(1<<11) /* MBZ on ILK */
+#define   PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE		(1<<10) /* GM45+ only */
+#define   PIPE_CONTROL_INDIRECT_STATE_DISABLE		(1<<9)
+#define   PIPE_CONTROL0_HDC_PIPELINE_FLUSH		REG_BIT(9)  /* gen12 */
+#define   PIPE_CONTROL_NOTIFY				(1<<8)
+#define   PIPE_CONTROL_FLUSH_ENABLE			(1<<7) /* gen7+ */
+#define   PIPE_CONTROL_DC_FLUSH_ENABLE			(1<<5)
+#define   PIPE_CONTROL_VF_CACHE_INVALIDATE		(1<<4)
+#define   PIPE_CONTROL_CONST_CACHE_INVALIDATE		(1<<3)
+#define   PIPE_CONTROL_STATE_CACHE_INVALIDATE		(1<<2)
+#define   PIPE_CONTROL_STALL_AT_SCOREBOARD		(1<<1)
+#define   PIPE_CONTROL_DEPTH_CACHE_FLUSH		(1<<0)
+#define   PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */
+
+/*
+ * 3D-related flags that can't be set on _engines_ that lack access to the 3D
+ * pipeline (i.e., CCS engines).
+ */
+#define PIPE_CONTROL_3D_ENGINE_FLAGS (\
+		PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH | \
+		PIPE_CONTROL_DEPTH_CACHE_FLUSH | \
+		PIPE_CONTROL_TILE_CACHE_FLUSH | \
+		PIPE_CONTROL_DEPTH_STALL | \
+		PIPE_CONTROL_STALL_AT_SCOREBOARD | \
+		PIPE_CONTROL_PSD_SYNC | \
+		PIPE_CONTROL_AMFS_FLUSH | \
+		PIPE_CONTROL_VF_CACHE_INVALIDATE | \
+		PIPE_CONTROL_GLOBAL_SNAPSHOT_RESET)
+
+/* 3D-related flags that can't be set on _platforms_ that lack a 3D pipeline */
+#define PIPE_CONTROL_3D_ARCH_FLAGS ( \
+		PIPE_CONTROL_3D_ENGINE_FLAGS | \
+		PIPE_CONTROL_INDIRECT_STATE_DISABLE | \
+		PIPE_CONTROL_FLUSH_ENABLE | \
+		PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE | \
+		PIPE_CONTROL_DC_FLUSH_ENABLE)
+
+#define MI_MATH(x)			MI_INSTR(0x1a, (x) - 1)
+#define MI_MATH_INSTR(opcode, op1, op2) ((opcode) << 20 | (op1) << 10 | (op2))
+/* Opcodes for MI_MATH_INSTR */
+#define   MI_MATH_NOOP			MI_MATH_INSTR(0x000, 0x0, 0x0)
+#define   MI_MATH_LOAD(op1, op2)	MI_MATH_INSTR(0x080, op1, op2)
+#define   MI_MATH_LOADINV(op1, op2)	MI_MATH_INSTR(0x480, op1, op2)
+#define   MI_MATH_LOAD0(op1)		MI_MATH_INSTR(0x081, op1)
+#define   MI_MATH_LOAD1(op1)		MI_MATH_INSTR(0x481, op1)
+#define   MI_MATH_ADD			MI_MATH_INSTR(0x100, 0x0, 0x0)
+#define   MI_MATH_SUB			MI_MATH_INSTR(0x101, 0x0, 0x0)
+#define   MI_MATH_AND			MI_MATH_INSTR(0x102, 0x0, 0x0)
+#define   MI_MATH_OR			MI_MATH_INSTR(0x103, 0x0, 0x0)
+#define   MI_MATH_XOR			MI_MATH_INSTR(0x104, 0x0, 0x0)
+#define   MI_MATH_STORE(op1, op2)	MI_MATH_INSTR(0x180, op1, op2)
+#define   MI_MATH_STOREINV(op1, op2)	MI_MATH_INSTR(0x580, op1, op2)
+/* Registers used as operands in MI_MATH_INSTR */
+#define   MI_MATH_REG(x)		(x)
+#define   MI_MATH_REG_SRCA		0x20
+#define   MI_MATH_REG_SRCB		0x21
+#define   MI_MATH_REG_ACCU		0x31
+#define   MI_MATH_REG_ZF		0x32
+#define   MI_MATH_REG_CF		0x33
+
+/*
+ * Media instructions used by the kernel
+ */
+#define MEDIA_INSTR(pipe, op, sub_op, flags) \
+	(__INSTR(INSTR_RC_CLIENT) | (pipe) << INSTR_SUBCLIENT_SHIFT | \
+	(op) << INSTR_26_TO_24_SHIFT | (sub_op) << 16 | (flags))
+
+#define MFX_WAIT				MEDIA_INSTR(1, 0, 0, 0)
+#define  MFX_WAIT_DW0_MFX_SYNC_CONTROL_FLAG	REG_BIT(8)
+#define  MFX_WAIT_DW0_PXP_SYNC_CONTROL_FLAG	REG_BIT(9)
+
+#define CRYPTO_KEY_EXCHANGE			MEDIA_INSTR(2, 6, 9, 0)
+
+/*
+ * Commands used only by the command parser
+ */
+#define MI_SET_PREDICATE        MI_INSTR(0x01, 0)
+#define MI_ARB_CHECK            MI_INSTR(0x05, 0)
+#define MI_RS_CONTROL           MI_INSTR(0x06, 0)
+#define MI_URB_ATOMIC_ALLOC     MI_INSTR(0x09, 0)
+#define MI_PREDICATE            MI_INSTR(0x0C, 0)
+#define MI_RS_CONTEXT           MI_INSTR(0x0F, 0)
+#define MI_TOPOLOGY_FILTER      MI_INSTR(0x0D, 0)
+#define MI_LOAD_SCAN_LINES_EXCL MI_INSTR(0x13, 0)
+#define MI_URB_CLEAR            MI_INSTR(0x19, 0)
+#define MI_UPDATE_GTT           MI_INSTR(0x23, 0)
+#define MI_CLFLUSH              MI_INSTR(0x27, 0)
+#define MI_REPORT_PERF_COUNT    MI_INSTR(0x28, 0)
+#define   MI_REPORT_PERF_COUNT_GGTT (1<<0)
+#define MI_RS_STORE_DATA_IMM    MI_INSTR(0x2B, 0)
+#define MI_LOAD_URB_MEM         MI_INSTR(0x2C, 0)
+#define MI_STORE_URB_MEM        MI_INSTR(0x2D, 0)
+#define MI_CONDITIONAL_BATCH_BUFFER_END MI_INSTR(0x36, 0)
+
+#define STATE_BASE_ADDRESS \
+	((0x3 << 29) | (0x0 << 27) | (0x1 << 24) | (0x1 << 16))
+#define BASE_ADDRESS_MODIFY		REG_BIT(0)
+#define PIPELINE_SELECT \
+	((0x3 << 29) | (0x1 << 27) | (0x1 << 24) | (0x4 << 16))
+#define PIPELINE_SELECT_MEDIA	       REG_BIT(0)
+#define GFX_OP_3DSTATE_VF_STATISTICS \
+	((0x3 << 29) | (0x1 << 27) | (0x0 << 24) | (0xB << 16))
+#define MEDIA_VFE_STATE \
+	((0x3 << 29) | (0x2 << 27) | (0x0 << 24) | (0x0 << 16))
+#define  MEDIA_VFE_STATE_MMIO_ACCESS_MASK (0x18)
+#define MEDIA_INTERFACE_DESCRIPTOR_LOAD \
+	((0x3 << 29) | (0x2 << 27) | (0x0 << 24) | (0x2 << 16))
+#define MEDIA_OBJECT \
+	((0x3 << 29) | (0x2 << 27) | (0x1 << 24) | (0x0 << 16))
+#define GPGPU_OBJECT                   ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x4<<16))
+#define GPGPU_WALKER                   ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x5<<16))
+#define GFX_OP_3DSTATE_DX9_CONSTANTF_VS \
+	((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x39<<16))
+#define GFX_OP_3DSTATE_DX9_CONSTANTF_PS \
+	((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x3A<<16))
+#define GFX_OP_3DSTATE_SO_DECL_LIST \
+	((0x3<<29)|(0x3<<27)|(0x1<<24)|(0x17<<16))
+
+#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_VS \
+	((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x43<<16))
+#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_GS \
+	((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x44<<16))
+#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_HS \
+	((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x45<<16))
+#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_DS \
+	((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x46<<16))
+#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_PS \
+	((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x47<<16))
+
+#define COLOR_BLT     ((0x2<<29)|(0x40<<22))
+#define SRC_COPY_BLT  ((0x2<<29)|(0x43<<22))
+
+/*
+ * Used to convert any address to canonical form.
+ * Starting from gen8, some commands (e.g. STATE_BASE_ADDRESS,
+ * MI_LOAD_REGISTER_MEM and others, see Broadwell PRM Vol2a) require the
+ * addresses to be in a canonical form:
+ * "GraphicsAddress[63:48] are ignored by the HW and assumed to be in correct
+ * canonical form [63:48] == [47]."
+ */
+#define GEN8_HIGH_ADDRESS_BIT 47
+static inline u64 gen8_canonical_addr(u64 address)
+{
+	return sign_extend64(address, GEN8_HIGH_ADDRESS_BIT);
+}
+
+static inline u64 gen8_noncanonical_addr(u64 address)
+{
+	return address & GENMASK_ULL(GEN8_HIGH_ADDRESS_BIT, 0);
+}
+
+static inline u32 *__gen6_emit_bb_start(u32 *cs, u32 addr, unsigned int flags)
+{
+	*cs++ = MI_BATCH_BUFFER_START | flags;
+	*cs++ = addr;
+
+	return cs;
+}
+
+#endif /* _INTEL_GPU_COMMANDS_H_ */