Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 350 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_step.c b/drivers/gpu/drm/i915/intel_step.c
new file mode 100644
index 000000000..84a6fe736
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_step.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020,2021 Intel Corporation
+ */
+
+#include "i915_drv.h"
+#include "intel_step.h"
+
+/*
+ * Some platforms have unusual ways of mapping PCI revision ID to GT/display
+ * steppings.  E.g., in some cases a higher PCI revision may translate to a
+ * lower stepping of the GT and/or display IP.  This file provides lookup
+ * tables to map the PCI revision into a standard set of stepping values that
+ * can be compared numerically.
+ *
+ * Also note that some revisions/steppings may have been set aside as
+ * placeholders but never materialized in real hardware; in those cases there
+ * may be jumps in the revision IDs or stepping values in the tables below.
+ */
+
+/*
+ * Some platforms always have the same stepping value for GT and display;
+ * use a macro to define these to make it easier to identify the platforms
+ * where the two steppings can deviate.
+ */
+#define COMMON_STEP(x)  .graphics_step = STEP_##x, .display_step = STEP_##x, .media_step = STEP_##x
+#define COMMON_GT_MEDIA_STEP(x)  .graphics_step = STEP_##x, .media_step = STEP_##x
+
+static const struct intel_step_info skl_revids[] = {
+	[0x6] = { COMMON_STEP(G0) },
+	[0x7] = { COMMON_STEP(H0) },
+	[0x9] = { COMMON_STEP(J0) },
+	[0xA] = { COMMON_STEP(I1) },
+};
+
+static const struct intel_step_info kbl_revids[] = {
+	[1] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_B0 },
+	[2] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_B0 },
+	[3] = { COMMON_GT_MEDIA_STEP(D0), .display_step = STEP_B0 },
+	[4] = { COMMON_GT_MEDIA_STEP(F0), .display_step = STEP_C0 },
+	[5] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_B1 },
+	[6] = { COMMON_GT_MEDIA_STEP(D1), .display_step = STEP_B1 },
+	[7] = { COMMON_GT_MEDIA_STEP(G0), .display_step = STEP_C0 },
+};
+
+static const struct intel_step_info bxt_revids[] = {
+	[0xA] = { COMMON_STEP(C0) },
+	[0xB] = { COMMON_STEP(C0) },
+	[0xC] = { COMMON_STEP(D0) },
+	[0xD] = { COMMON_STEP(E0) },
+};
+
+static const struct intel_step_info glk_revids[] = {
+	[3] = { COMMON_STEP(B0) },
+};
+
+static const struct intel_step_info icl_revids[] = {
+	[7] = { COMMON_STEP(D0) },
+};
+
+static const struct intel_step_info jsl_ehl_revids[] = {
+	[0] = { COMMON_STEP(A0) },
+	[1] = { COMMON_STEP(B0) },
+};
+
+static const struct intel_step_info tgl_uy_revids[] = {
+	[0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A0 },
+	[1] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_C0 },
+	[2] = { COMMON_GT_MEDIA_STEP(B1), .display_step = STEP_C0 },
+	[3] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_D0 },
+};
+
+/* Same GT stepping between tgl_uy_revids and tgl_revids don't mean the same HW */
+static const struct intel_step_info tgl_revids[] = {
+	[0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_B0 },
+	[1] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_D0 },
+};
+
+static const struct intel_step_info rkl_revids[] = {
+	[0] = { COMMON_STEP(A0) },
+	[1] = { COMMON_STEP(B0) },
+	[4] = { COMMON_STEP(C0) },
+};
+
+static const struct intel_step_info dg1_revids[] = {
+	[0] = { COMMON_STEP(A0) },
+	[1] = { COMMON_STEP(B0) },
+};
+
+static const struct intel_step_info adls_revids[] = {
+	[0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A0 },
+	[0x1] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A2 },
+	[0x4] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_B0 },
+	[0x8] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_B0 },
+	[0xC] = { COMMON_GT_MEDIA_STEP(D0), .display_step = STEP_C0 },
+};
+
+static const struct intel_step_info adlp_revids[] = {
+	[0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A0 },
+	[0x4] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_B0 },
+	[0x8] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_C0 },
+	[0xC] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_D0 },
+};
+
+static const struct intel_step_info xehpsdv_revids[] = {
+	[0x0] = { COMMON_GT_MEDIA_STEP(A0) },
+	[0x1] = { COMMON_GT_MEDIA_STEP(A1) },
+	[0x4] = { COMMON_GT_MEDIA_STEP(B0) },
+	[0x8] = { COMMON_GT_MEDIA_STEP(C0) },
+};
+
+static const struct intel_step_info dg2_g10_revid_step_tbl[] = {
+	[0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A0 },
+	[0x1] = { COMMON_GT_MEDIA_STEP(A1), .display_step = STEP_A0 },
+	[0x4] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_B0 },
+	[0x8] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_C0 },
+};
+
+static const struct intel_step_info dg2_g11_revid_step_tbl[] = {
+	[0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_B0 },
+	[0x4] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_C0 },
+	[0x5] = { COMMON_GT_MEDIA_STEP(B1), .display_step = STEP_C0 },
+};
+
+static const struct intel_step_info dg2_g12_revid_step_tbl[] = {
+	[0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_C0 },
+};
+
+static const struct intel_step_info adls_rpls_revids[] = {
+	[0x4] = { COMMON_GT_MEDIA_STEP(D0), .display_step = STEP_D0 },
+	[0xC] = { COMMON_GT_MEDIA_STEP(D0), .display_step = STEP_C0 },
+};
+
+static const struct intel_step_info adlp_rplp_revids[] = {
+	[0x4] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_E0 },
+};
+
+static const struct intel_step_info adlp_n_revids[] = {
+	[0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_D0 },
+};
+
+static u8 gmd_to_intel_step(struct drm_i915_private *i915,
+			    struct intel_ip_version *gmd)
+{
+	u8 step = gmd->step + STEP_A0;
+
+	if (step >= STEP_FUTURE) {
+		drm_dbg(&i915->drm, "Using future steppings\n");
+		return STEP_FUTURE;
+	}
+
+	return step;
+}
+
+static void pvc_step_init(struct drm_i915_private *i915, int pci_revid);
+
+void intel_step_init(struct drm_i915_private *i915)
+{
+	const struct intel_step_info *revids = NULL;
+	int size = 0;
+	int revid = INTEL_REVID(i915);
+	struct intel_step_info step = {};
+
+	if (HAS_GMD_ID(i915)) {
+		step.graphics_step = gmd_to_intel_step(i915,
+						       &RUNTIME_INFO(i915)->graphics.ip);
+		step.media_step = gmd_to_intel_step(i915,
+						    &RUNTIME_INFO(i915)->media.ip);
+		step.display_step = gmd_to_intel_step(i915,
+						      &RUNTIME_INFO(i915)->display.ip);
+		RUNTIME_INFO(i915)->step = step;
+
+		return;
+	}
+
+	if (IS_PONTEVECCHIO(i915)) {
+		pvc_step_init(i915, revid);
+		return;
+	} else if (IS_DG2_G10(i915)) {
+		revids = dg2_g10_revid_step_tbl;
+		size = ARRAY_SIZE(dg2_g10_revid_step_tbl);
+	} else if (IS_DG2_G11(i915)) {
+		revids = dg2_g11_revid_step_tbl;
+		size = ARRAY_SIZE(dg2_g11_revid_step_tbl);
+	} else if (IS_DG2_G12(i915)) {
+		revids = dg2_g12_revid_step_tbl;
+		size = ARRAY_SIZE(dg2_g12_revid_step_tbl);
+	} else if (IS_XEHPSDV(i915)) {
+		revids = xehpsdv_revids;
+		size = ARRAY_SIZE(xehpsdv_revids);
+	} else if (IS_ADLP_N(i915)) {
+		revids = adlp_n_revids;
+		size = ARRAY_SIZE(adlp_n_revids);
+	} else if (IS_ADLP_RPLP(i915)) {
+		revids = adlp_rplp_revids;
+		size = ARRAY_SIZE(adlp_rplp_revids);
+	} else if (IS_ALDERLAKE_P(i915)) {
+		revids = adlp_revids;
+		size = ARRAY_SIZE(adlp_revids);
+	} else if (IS_ADLS_RPLS(i915)) {
+		revids = adls_rpls_revids;
+		size = ARRAY_SIZE(adls_rpls_revids);
+	} else if (IS_ALDERLAKE_S(i915)) {
+		revids = adls_revids;
+		size = ARRAY_SIZE(adls_revids);
+	} else if (IS_DG1(i915)) {
+		revids = dg1_revids;
+		size = ARRAY_SIZE(dg1_revids);
+	} else if (IS_ROCKETLAKE(i915)) {
+		revids = rkl_revids;
+		size = ARRAY_SIZE(rkl_revids);
+	} else if (IS_TGL_UY(i915)) {
+		revids = tgl_uy_revids;
+		size = ARRAY_SIZE(tgl_uy_revids);
+	} else if (IS_TIGERLAKE(i915)) {
+		revids = tgl_revids;
+		size = ARRAY_SIZE(tgl_revids);
+	} else if (IS_JSL_EHL(i915)) {
+		revids = jsl_ehl_revids;
+		size = ARRAY_SIZE(jsl_ehl_revids);
+	} else if (IS_ICELAKE(i915)) {
+		revids = icl_revids;
+		size = ARRAY_SIZE(icl_revids);
+	} else if (IS_GEMINILAKE(i915)) {
+		revids = glk_revids;
+		size = ARRAY_SIZE(glk_revids);
+	} else if (IS_BROXTON(i915)) {
+		revids = bxt_revids;
+		size = ARRAY_SIZE(bxt_revids);
+	} else if (IS_KABYLAKE(i915)) {
+		revids = kbl_revids;
+		size = ARRAY_SIZE(kbl_revids);
+	} else if (IS_SKYLAKE(i915)) {
+		revids = skl_revids;
+		size = ARRAY_SIZE(skl_revids);
+	}
+
+	/* Not using the stepping scheme for the platform yet. */
+	if (!revids)
+		return;
+
+	if (revid < size && revids[revid].graphics_step != STEP_NONE) {
+		step = revids[revid];
+	} else {
+		drm_warn(&i915->drm, "Unknown revid 0x%02x\n", revid);
+
+		/*
+		 * If we hit a gap in the revid array, use the information for
+		 * the next revid.
+		 *
+		 * This may be wrong in all sorts of ways, especially if the
+		 * steppings in the array are not monotonically increasing, but
+		 * it's better than defaulting to 0.
+		 */
+		while (revid < size && revids[revid].graphics_step == STEP_NONE)
+			revid++;
+
+		if (revid < size) {
+			drm_dbg(&i915->drm, "Using steppings for revid 0x%02x\n",
+				revid);
+			step = revids[revid];
+		} else {
+			drm_dbg(&i915->drm, "Using future steppings\n");
+			step.graphics_step = STEP_FUTURE;
+			step.display_step = STEP_FUTURE;
+		}
+	}
+
+	if (drm_WARN_ON(&i915->drm, step.graphics_step == STEP_NONE))
+		return;
+
+	RUNTIME_INFO(i915)->step = step;
+}
+
+#define PVC_BD_REVID	GENMASK(5, 3)
+#define PVC_CT_REVID	GENMASK(2, 0)
+
+static const int pvc_bd_subids[] = {
+	[0x0] = STEP_A0,
+	[0x3] = STEP_B0,
+	[0x4] = STEP_B1,
+	[0x5] = STEP_B3,
+};
+
+static const int pvc_ct_subids[] = {
+	[0x3] = STEP_A0,
+	[0x5] = STEP_B0,
+	[0x6] = STEP_B1,
+	[0x7] = STEP_C0,
+};
+
+static int
+pvc_step_lookup(struct drm_i915_private *i915, const char *type,
+		const int *table, int size, int subid)
+{
+	if (subid < size && table[subid] != STEP_NONE)
+		return table[subid];
+
+	drm_warn(&i915->drm, "Unknown %s id 0x%02x\n", type, subid);
+
+	/*
+	 * As on other platforms, try to use the next higher ID if we land on a
+	 * gap in the table.
+	 */
+	while (subid < size && table[subid] == STEP_NONE)
+		subid++;
+
+	if (subid < size) {
+		drm_dbg(&i915->drm, "Using steppings for %s id 0x%02x\n",
+			type, subid);
+		return table[subid];
+	}
+
+	drm_dbg(&i915->drm, "Using future steppings\n");
+	return STEP_FUTURE;
+}
+
+/*
+ * PVC needs special handling since we don't lookup the
+ * revid in a table, but rather specific bitfields within
+ * the revid for various components.
+ */
+static void pvc_step_init(struct drm_i915_private *i915, int pci_revid)
+{
+	int ct_subid, bd_subid;
+
+	bd_subid = FIELD_GET(PVC_BD_REVID, pci_revid);
+	ct_subid = FIELD_GET(PVC_CT_REVID, pci_revid);
+
+	RUNTIME_INFO(i915)->step.basedie_step =
+		pvc_step_lookup(i915, "Base Die", pvc_bd_subids,
+				ARRAY_SIZE(pvc_bd_subids), bd_subid);
+	RUNTIME_INFO(i915)->step.graphics_step =
+		pvc_step_lookup(i915, "Compute Tile", pvc_ct_subids,
+				ARRAY_SIZE(pvc_ct_subids), ct_subid);
+}
+
+#define STEP_NAME_CASE(name)	\
+	case STEP_##name:	\
+		return #name;
+
+const char *intel_step_name(enum intel_step step)
+{
+	switch (step) {
+	STEP_NAME_LIST(STEP_NAME_CASE);
+
+	default:
+		return "**";
+	}
+}