Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 475 insertions, 0 deletions

diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
new file mode 100644
index 000000000..53231bfdf
--- /dev/null
+++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+
+#include <media/cec-notifier.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_device.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include <linux/media-bus-format.h>
+#include <linux/videodev2.h>
+
+#include "meson_drv.h"
+#include "meson_registers.h"
+#include "meson_vclk.h"
+#include "meson_venc.h"
+#include "meson_encoder_hdmi.h"
+
+struct meson_encoder_hdmi {
+	struct drm_encoder encoder;
+	struct drm_bridge bridge;
+	struct drm_bridge *next_bridge;
+	struct drm_connector *connector;
+	struct meson_drm *priv;
+	unsigned long output_bus_fmt;
+	struct cec_notifier *cec_notifier;
+};
+
+#define bridge_to_meson_encoder_hdmi(x) \
+	container_of(x, struct meson_encoder_hdmi, bridge)
+
+static int meson_encoder_hdmi_attach(struct drm_bridge *bridge,
+				     enum drm_bridge_attach_flags flags)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+
+	return drm_bridge_attach(bridge->encoder, encoder_hdmi->next_bridge,
+				 &encoder_hdmi->bridge, flags);
+}
+
+static void meson_encoder_hdmi_detach(struct drm_bridge *bridge)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+
+	cec_notifier_conn_unregister(encoder_hdmi->cec_notifier);
+	encoder_hdmi->cec_notifier = NULL;
+}
+
+static void meson_encoder_hdmi_set_vclk(struct meson_encoder_hdmi *encoder_hdmi,
+					const struct drm_display_mode *mode)
+{
+	struct meson_drm *priv = encoder_hdmi->priv;
+	int vic = drm_match_cea_mode(mode);
+	unsigned int phy_freq;
+	unsigned int vclk_freq;
+	unsigned int venc_freq;
+	unsigned int hdmi_freq;
+
+	vclk_freq = mode->clock;
+
+	/* For 420, pixel clock is half unlike venc clock */
+	if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+		vclk_freq /= 2;
+
+	/* TMDS clock is pixel_clock * 10 */
+	phy_freq = vclk_freq * 10;
+
+	if (!vic) {
+		meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, phy_freq,
+				 vclk_freq, vclk_freq, vclk_freq, false);
+		return;
+	}
+
+	/* 480i/576i needs global pixel doubling */
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		vclk_freq *= 2;
+
+	venc_freq = vclk_freq;
+	hdmi_freq = vclk_freq;
+
+	/* VENC double pixels for 1080i, 720p and YUV420 modes */
+	if (meson_venc_hdmi_venc_repeat(vic) ||
+	    encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+		venc_freq *= 2;
+
+	vclk_freq = max(venc_freq, hdmi_freq);
+
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		venc_freq /= 2;
+
+	dev_dbg(priv->dev, "vclk:%d phy=%d venc=%d hdmi=%d enci=%d\n",
+		phy_freq, vclk_freq, venc_freq, hdmi_freq,
+		priv->venc.hdmi_use_enci);
+
+	meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, phy_freq, vclk_freq,
+			 venc_freq, hdmi_freq, priv->venc.hdmi_use_enci);
+}
+
+static enum drm_mode_status meson_encoder_hdmi_mode_valid(struct drm_bridge *bridge,
+					const struct drm_display_info *display_info,
+					const struct drm_display_mode *mode)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+	struct meson_drm *priv = encoder_hdmi->priv;
+	bool is_hdmi2_sink = display_info->hdmi.scdc.supported;
+	unsigned int phy_freq;
+	unsigned int vclk_freq;
+	unsigned int venc_freq;
+	unsigned int hdmi_freq;
+	int vic = drm_match_cea_mode(mode);
+	enum drm_mode_status status;
+
+	dev_dbg(priv->dev, "Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
+
+	/* If sink does not support 540MHz, reject the non-420 HDMI2 modes */
+	if (display_info->max_tmds_clock &&
+	    mode->clock > display_info->max_tmds_clock &&
+	    !drm_mode_is_420_only(display_info, mode) &&
+	    !drm_mode_is_420_also(display_info, mode))
+		return MODE_BAD;
+
+	/* Check against non-VIC supported modes */
+	if (!vic) {
+		status = meson_venc_hdmi_supported_mode(mode);
+		if (status != MODE_OK)
+			return status;
+
+		return meson_vclk_dmt_supported_freq(priv, mode->clock);
+	/* Check against supported VIC modes */
+	} else if (!meson_venc_hdmi_supported_vic(vic))
+		return MODE_BAD;
+
+	vclk_freq = mode->clock;
+
+	/* For 420, pixel clock is half unlike venc clock */
+	if (drm_mode_is_420_only(display_info, mode) ||
+	    (!is_hdmi2_sink &&
+	     drm_mode_is_420_also(display_info, mode)))
+		vclk_freq /= 2;
+
+	/* TMDS clock is pixel_clock * 10 */
+	phy_freq = vclk_freq * 10;
+
+	/* 480i/576i needs global pixel doubling */
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		vclk_freq *= 2;
+
+	venc_freq = vclk_freq;
+	hdmi_freq = vclk_freq;
+
+	/* VENC double pixels for 1080i, 720p and YUV420 modes */
+	if (meson_venc_hdmi_venc_repeat(vic) ||
+	    drm_mode_is_420_only(display_info, mode) ||
+	    (!is_hdmi2_sink &&
+	     drm_mode_is_420_also(display_info, mode)))
+		venc_freq *= 2;
+
+	vclk_freq = max(venc_freq, hdmi_freq);
+
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		venc_freq /= 2;
+
+	dev_dbg(priv->dev, "%s: vclk:%d phy=%d venc=%d hdmi=%d\n",
+		__func__, phy_freq, vclk_freq, venc_freq, hdmi_freq);
+
+	return meson_vclk_vic_supported_freq(priv, phy_freq, vclk_freq);
+}
+
+static void meson_encoder_hdmi_atomic_enable(struct drm_bridge *bridge,
+					     struct drm_bridge_state *bridge_state)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+	struct drm_atomic_state *state = bridge_state->base.state;
+	unsigned int ycrcb_map = VPU_HDMI_OUTPUT_CBYCR;
+	struct meson_drm *priv = encoder_hdmi->priv;
+	struct drm_connector_state *conn_state;
+	const struct drm_display_mode *mode;
+	struct drm_crtc_state *crtc_state;
+	struct drm_connector *connector;
+	bool yuv420_mode = false;
+	int vic;
+
+	connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
+	if (WARN_ON(!connector))
+		return;
+
+	conn_state = drm_atomic_get_new_connector_state(state, connector);
+	if (WARN_ON(!conn_state))
+		return;
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
+	if (WARN_ON(!crtc_state))
+		return;
+
+	mode = &crtc_state->adjusted_mode;
+
+	vic = drm_match_cea_mode(mode);
+
+	dev_dbg(priv->dev, "\"%s\" vic %d\n", mode->name, vic);
+
+	if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24) {
+		ycrcb_map = VPU_HDMI_OUTPUT_CRYCB;
+		yuv420_mode = true;
+	} else if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYVY8_1X16)
+		ycrcb_map = VPU_HDMI_OUTPUT_CRYCB;
+
+	/* VENC + VENC-DVI Mode setup */
+	meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, yuv420_mode, mode);
+
+	/* VCLK Set clock */
+	meson_encoder_hdmi_set_vclk(encoder_hdmi, mode);
+
+	if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+		/* Setup YUV420 to HDMI-TX, no 10bit diphering */
+		writel_relaxed(2 | (2 << 2),
+			       priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+	else if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYVY8_1X16)
+		/* Setup YUV422 to HDMI-TX, no 10bit diphering */
+		writel_relaxed(1 | (2 << 2),
+				priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+	else
+		/* Setup YUV444 to HDMI-TX, no 10bit diphering */
+		writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+
+	dev_dbg(priv->dev, "%s\n", priv->venc.hdmi_use_enci ? "VENCI" : "VENCP");
+
+	if (priv->venc.hdmi_use_enci)
+		writel_relaxed(1, priv->io_base + _REG(ENCI_VIDEO_EN));
+	else
+		writel_relaxed(1, priv->io_base + _REG(ENCP_VIDEO_EN));
+}
+
+static void meson_encoder_hdmi_atomic_disable(struct drm_bridge *bridge,
+					     struct drm_bridge_state *bridge_state)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+	struct meson_drm *priv = encoder_hdmi->priv;
+
+	writel_bits_relaxed(0x3, 0,
+			    priv->io_base + _REG(VPU_HDMI_SETTING));
+
+	writel_relaxed(0, priv->io_base + _REG(ENCI_VIDEO_EN));
+	writel_relaxed(0, priv->io_base + _REG(ENCP_VIDEO_EN));
+}
+
+static const u32 meson_encoder_hdmi_out_bus_fmts[] = {
+	MEDIA_BUS_FMT_YUV8_1X24,
+	MEDIA_BUS_FMT_UYVY8_1X16,
+	MEDIA_BUS_FMT_UYYVYY8_0_5X24,
+};
+
+static u32 *
+meson_encoder_hdmi_get_inp_bus_fmts(struct drm_bridge *bridge,
+					struct drm_bridge_state *bridge_state,
+					struct drm_crtc_state *crtc_state,
+					struct drm_connector_state *conn_state,
+					u32 output_fmt,
+					unsigned int *num_input_fmts)
+{
+	u32 *input_fmts = NULL;
+	int i;
+
+	*num_input_fmts = 0;
+
+	for (i = 0 ; i < ARRAY_SIZE(meson_encoder_hdmi_out_bus_fmts) ; ++i) {
+		if (output_fmt == meson_encoder_hdmi_out_bus_fmts[i]) {
+			*num_input_fmts = 1;
+			input_fmts = kcalloc(*num_input_fmts,
+					     sizeof(*input_fmts),
+					     GFP_KERNEL);
+			if (!input_fmts)
+				return NULL;
+
+			input_fmts[0] = output_fmt;
+
+			break;
+		}
+	}
+
+	return input_fmts;
+}
+
+static int meson_encoder_hdmi_atomic_check(struct drm_bridge *bridge,
+					struct drm_bridge_state *bridge_state,
+					struct drm_crtc_state *crtc_state,
+					struct drm_connector_state *conn_state)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+	struct drm_connector_state *old_conn_state =
+		drm_atomic_get_old_connector_state(conn_state->state, conn_state->connector);
+	struct meson_drm *priv = encoder_hdmi->priv;
+
+	encoder_hdmi->output_bus_fmt = bridge_state->output_bus_cfg.format;
+
+	dev_dbg(priv->dev, "output_bus_fmt %lx\n", encoder_hdmi->output_bus_fmt);
+
+	if (!drm_connector_atomic_hdr_metadata_equal(old_conn_state, conn_state))
+		crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+static void meson_encoder_hdmi_hpd_notify(struct drm_bridge *bridge,
+					  enum drm_connector_status status)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+	struct edid *edid;
+
+	if (!encoder_hdmi->cec_notifier)
+		return;
+
+	if (status == connector_status_connected) {
+		edid = drm_bridge_get_edid(encoder_hdmi->next_bridge, encoder_hdmi->connector);
+		if (!edid)
+			return;
+
+		cec_notifier_set_phys_addr_from_edid(encoder_hdmi->cec_notifier, edid);
+	} else
+		cec_notifier_phys_addr_invalidate(encoder_hdmi->cec_notifier);
+}
+
+static const struct drm_bridge_funcs meson_encoder_hdmi_bridge_funcs = {
+	.attach = meson_encoder_hdmi_attach,
+	.detach = meson_encoder_hdmi_detach,
+	.mode_valid = meson_encoder_hdmi_mode_valid,
+	.hpd_notify = meson_encoder_hdmi_hpd_notify,
+	.atomic_enable = meson_encoder_hdmi_atomic_enable,
+	.atomic_disable = meson_encoder_hdmi_atomic_disable,
+	.atomic_get_input_bus_fmts = meson_encoder_hdmi_get_inp_bus_fmts,
+	.atomic_check = meson_encoder_hdmi_atomic_check,
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
+};
+
+int meson_encoder_hdmi_init(struct meson_drm *priv)
+{
+	struct meson_encoder_hdmi *meson_encoder_hdmi;
+	struct platform_device *pdev;
+	struct device_node *remote;
+	int ret;
+
+	meson_encoder_hdmi = devm_kzalloc(priv->dev, sizeof(*meson_encoder_hdmi), GFP_KERNEL);
+	if (!meson_encoder_hdmi)
+		return -ENOMEM;
+
+	/* HDMI Transceiver Bridge */
+	remote = of_graph_get_remote_node(priv->dev->of_node, 1, 0);
+	if (!remote) {
+		dev_err(priv->dev, "HDMI transceiver device is disabled");
+		return 0;
+	}
+
+	meson_encoder_hdmi->next_bridge = of_drm_find_bridge(remote);
+	if (!meson_encoder_hdmi->next_bridge) {
+		dev_err(priv->dev, "Failed to find HDMI transceiver bridge\n");
+		ret = -EPROBE_DEFER;
+		goto err_put_node;
+	}
+
+	/* HDMI Encoder Bridge */
+	meson_encoder_hdmi->bridge.funcs = &meson_encoder_hdmi_bridge_funcs;
+	meson_encoder_hdmi->bridge.of_node = priv->dev->of_node;
+	meson_encoder_hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
+	meson_encoder_hdmi->bridge.interlace_allowed = true;
+
+	drm_bridge_add(&meson_encoder_hdmi->bridge);
+
+	meson_encoder_hdmi->priv = priv;
+
+	/* Encoder */
+	ret = drm_simple_encoder_init(priv->drm, &meson_encoder_hdmi->encoder,
+				      DRM_MODE_ENCODER_TMDS);
+	if (ret) {
+		dev_err(priv->dev, "Failed to init HDMI encoder: %d\n", ret);
+		goto err_put_node;
+	}
+
+	meson_encoder_hdmi->encoder.possible_crtcs = BIT(0);
+
+	/* Attach HDMI Encoder Bridge to Encoder */
+	ret = drm_bridge_attach(&meson_encoder_hdmi->encoder, &meson_encoder_hdmi->bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		dev_err(priv->dev, "Failed to attach bridge: %d\n", ret);
+		goto err_put_node;
+	}
+
+	/* Initialize & attach Bridge Connector */
+	meson_encoder_hdmi->connector = drm_bridge_connector_init(priv->drm,
+							&meson_encoder_hdmi->encoder);
+	if (IS_ERR(meson_encoder_hdmi->connector)) {
+		dev_err(priv->dev, "Unable to create HDMI bridge connector\n");
+		ret = PTR_ERR(meson_encoder_hdmi->connector);
+		goto err_put_node;
+	}
+	drm_connector_attach_encoder(meson_encoder_hdmi->connector,
+				     &meson_encoder_hdmi->encoder);
+
+	/*
+	 * We should have now in place:
+	 * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[display connector bridge]->[display connector]
+	 */
+
+	/*
+	 * drm_connector_attach_max_bpc_property() requires the
+	 * connector to have a state.
+	 */
+	drm_atomic_helper_connector_reset(meson_encoder_hdmi->connector);
+
+	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL) ||
+	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
+	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
+		drm_connector_attach_hdr_output_metadata_property(meson_encoder_hdmi->connector);
+
+	drm_connector_attach_max_bpc_property(meson_encoder_hdmi->connector, 8, 8);
+
+	/* Handle this here until handled by drm_bridge_connector_init() */
+	meson_encoder_hdmi->connector->ycbcr_420_allowed = true;
+
+	pdev = of_find_device_by_node(remote);
+	of_node_put(remote);
+	if (pdev) {
+		struct cec_connector_info conn_info;
+		struct cec_notifier *notifier;
+
+		cec_fill_conn_info_from_drm(&conn_info, meson_encoder_hdmi->connector);
+
+		notifier = cec_notifier_conn_register(&pdev->dev, NULL, &conn_info);
+		if (!notifier) {
+			put_device(&pdev->dev);
+			return -ENOMEM;
+		}
+
+		meson_encoder_hdmi->cec_notifier = notifier;
+	}
+
+	priv->encoders[MESON_ENC_HDMI] = meson_encoder_hdmi;
+
+	dev_dbg(priv->dev, "HDMI encoder initialized\n");
+
+	return 0;
+
+err_put_node:
+	of_node_put(remote);
+	return ret;
+}
+
+void meson_encoder_hdmi_remove(struct meson_drm *priv)
+{
+	struct meson_encoder_hdmi *meson_encoder_hdmi;
+
+	if (priv->encoders[MESON_ENC_HDMI]) {
+		meson_encoder_hdmi = priv->encoders[MESON_ENC_HDMI];
+		drm_bridge_remove(&meson_encoder_hdmi->bridge);
+		drm_bridge_remove(meson_encoder_hdmi->next_bridge);
+	}
+}