Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 558 insertions, 0 deletions

diff --git a/drivers/gpu/drm/mgag200/mgag200_g200se.c b/drivers/gpu/drm/mgag200/mgag200_g200se.c
new file mode 100644
index 000000000..bd6e573c9
--- /dev/null
+++ b/drivers/gpu/drm/mgag200/mgag200_g200se.c
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_probe_helper.h>
+
+#include "mgag200_drv.h"
+
+static int mgag200_g200se_init_pci_options(struct pci_dev *pdev)
+{
+	struct device *dev = &pdev->dev;
+	bool has_sgram;
+	u32 option;
+	int err;
+
+	err = pci_read_config_dword(pdev, PCI_MGA_OPTION, &option);
+	if (err != PCIBIOS_SUCCESSFUL) {
+		dev_err(dev, "pci_read_config_dword(PCI_MGA_OPTION) failed: %d\n", err);
+		return pcibios_err_to_errno(err);
+	}
+
+	has_sgram = !!(option & PCI_MGA_OPTION_HARDPWMSK);
+
+	option = 0x40049120;
+	if (has_sgram)
+		option |= PCI_MGA_OPTION_HARDPWMSK;
+
+	return mgag200_init_pci_options(pdev, option, 0x00008000);
+}
+
+static void mgag200_g200se_init_registers(struct mgag200_g200se_device *g200se)
+{
+	static const u8 dacvalue[] = {
+		MGAG200_DAC_DEFAULT(0x03,
+				    MGA1064_PIX_CLK_CTL_SEL_PLL,
+				    MGA1064_MISC_CTL_DAC_EN |
+				    MGA1064_MISC_CTL_VGA8 |
+				    MGA1064_MISC_CTL_DAC_RAM_CS,
+				    0x00, 0x00, 0x00)
+	};
+
+	struct mga_device *mdev = &g200se->base;
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(dacvalue); i++) {
+		if ((i <= 0x17) ||
+		    (i == 0x1b) ||
+		    (i == 0x1c) ||
+		    ((i >= 0x1f) && (i <= 0x29)) ||
+		    ((i == 0x2c) || (i == 0x2d) || (i == 0x2e)) ||
+		    ((i >= 0x30) && (i <= 0x37)))
+			continue;
+		WREG_DAC(i, dacvalue[i]);
+	}
+
+	mgag200_init_registers(mdev);
+}
+
+static void mgag200_g200se_set_hiprilvl(struct mga_device *mdev,
+					const struct drm_display_mode *mode,
+					const struct drm_format_info *format)
+{
+	struct mgag200_g200se_device *g200se = to_mgag200_g200se_device(&mdev->base);
+	unsigned int hiprilvl;
+	u8 crtcext6;
+
+	if  (g200se->unique_rev_id >= 0x04) {
+		hiprilvl = 0;
+	} else if (g200se->unique_rev_id >= 0x02) {
+		unsigned int bpp;
+		unsigned long mb;
+
+		if (format->cpp[0] * 8 > 16)
+			bpp = 32;
+		else if (format->cpp[0] * 8 > 8)
+			bpp = 16;
+		else
+			bpp = 8;
+
+		mb = (mode->clock * bpp) / 1000;
+		if (mb > 3100)
+			hiprilvl = 0;
+		else if (mb > 2600)
+			hiprilvl = 1;
+		else if (mb > 1900)
+			hiprilvl = 2;
+		else if (mb > 1160)
+			hiprilvl = 3;
+		else if (mb > 440)
+			hiprilvl = 4;
+		else
+			hiprilvl = 5;
+
+	} else if (g200se->unique_rev_id >= 0x01) {
+		hiprilvl = 3;
+	} else {
+		hiprilvl = 4;
+	}
+
+	crtcext6 = hiprilvl; /* implicitly sets maxhipri to 0 */
+
+	WREG_ECRT(0x06, crtcext6);
+}
+
+/*
+ * PIXPLLC
+ */
+
+static int mgag200_g200se_00_pixpllc_atomic_check(struct drm_crtc *crtc,
+						  struct drm_atomic_state *new_state)
+{
+	static const unsigned int vcomax = 320000;
+	static const unsigned int vcomin = 160000;
+	static const unsigned int pllreffreq = 25000;
+
+	struct drm_crtc_state *new_crtc_state = drm_atomic_get_new_crtc_state(new_state, crtc);
+	struct mgag200_crtc_state *new_mgag200_crtc_state = to_mgag200_crtc_state(new_crtc_state);
+	long clock = new_crtc_state->mode.clock;
+	struct mgag200_pll_values *pixpllc = &new_mgag200_crtc_state->pixpllc;
+	unsigned int delta, tmpdelta, permitteddelta;
+	unsigned int testp, testm, testn;
+	unsigned int p, m, n, s;
+	unsigned int computed;
+
+	m = n = p = s = 0;
+	delta = 0xffffffff;
+	permitteddelta = clock * 5 / 1000;
+
+	for (testp = 8; testp > 0; testp /= 2) {
+		if (clock * testp > vcomax)
+			continue;
+		if (clock * testp < vcomin)
+			continue;
+
+		for (testn = 17; testn < 256; testn++) {
+			for (testm = 1; testm < 32; testm++) {
+				computed = (pllreffreq * testn) / (testm * testp);
+				if (computed > clock)
+					tmpdelta = computed - clock;
+				else
+					tmpdelta = clock - computed;
+				if (tmpdelta < delta) {
+					delta = tmpdelta;
+					m = testm;
+					n = testn;
+					p = testp;
+				}
+			}
+		}
+	}
+
+	if (delta > permitteddelta) {
+		pr_warn("PLL delta too large\n");
+		return -EINVAL;
+	}
+
+	pixpllc->m = m;
+	pixpllc->n = n;
+	pixpllc->p = p;
+	pixpllc->s = s;
+
+	return 0;
+}
+
+static void mgag200_g200se_00_pixpllc_atomic_update(struct drm_crtc *crtc,
+						    struct drm_atomic_state *old_state)
+{
+	struct drm_device *dev = crtc->dev;
+	struct mga_device *mdev = to_mga_device(dev);
+	struct drm_crtc_state *crtc_state = crtc->state;
+	struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state);
+	struct mgag200_pll_values *pixpllc = &mgag200_crtc_state->pixpllc;
+	unsigned int pixpllcm, pixpllcn, pixpllcp, pixpllcs;
+	u8 xpixpllcm, xpixpllcn, xpixpllcp;
+
+	pixpllcm = pixpllc->m - 1;
+	pixpllcn = pixpllc->n - 1;
+	pixpllcp = pixpllc->p - 1;
+	pixpllcs = pixpllc->s;
+
+	xpixpllcm = pixpllcm | ((pixpllcn & BIT(8)) >> 1);
+	xpixpllcn = pixpllcn;
+	xpixpllcp = (pixpllcs << 3) | pixpllcp;
+
+	WREG_MISC_MASKED(MGAREG_MISC_CLKSEL_MGA, MGAREG_MISC_CLKSEL_MASK);
+
+	WREG_DAC(MGA1064_PIX_PLLC_M, xpixpllcm);
+	WREG_DAC(MGA1064_PIX_PLLC_N, xpixpllcn);
+	WREG_DAC(MGA1064_PIX_PLLC_P, xpixpllcp);
+}
+
+static int mgag200_g200se_04_pixpllc_atomic_check(struct drm_crtc *crtc,
+						  struct drm_atomic_state *new_state)
+{
+	static const unsigned int vcomax = 1600000;
+	static const unsigned int vcomin = 800000;
+	static const unsigned int pllreffreq = 25000;
+	static const unsigned int pvalues_e4[] = {16, 14, 12, 10, 8, 6, 4, 2, 1};
+
+	struct drm_crtc_state *new_crtc_state = drm_atomic_get_new_crtc_state(new_state, crtc);
+	struct mgag200_crtc_state *new_mgag200_crtc_state = to_mgag200_crtc_state(new_crtc_state);
+	long clock = new_crtc_state->mode.clock;
+	struct mgag200_pll_values *pixpllc = &new_mgag200_crtc_state->pixpllc;
+	unsigned int delta, tmpdelta, permitteddelta;
+	unsigned int testp, testm, testn;
+	unsigned int p, m, n, s;
+	unsigned int computed;
+	unsigned int fvv;
+	unsigned int i;
+
+	m = n = p = s = 0;
+	delta = 0xffffffff;
+
+	if (clock < 25000)
+		clock = 25000;
+	clock = clock * 2;
+
+	/* Permited delta is 0.5% as VESA Specification */
+	permitteddelta = clock * 5 / 1000;
+
+	for (i = 0 ; i < ARRAY_SIZE(pvalues_e4); i++) {
+		testp = pvalues_e4[i];
+
+		if ((clock * testp) > vcomax)
+			continue;
+		if ((clock * testp) < vcomin)
+			continue;
+
+		for (testn = 50; testn <= 256; testn++) {
+			for (testm = 1; testm <= 32; testm++) {
+				computed = (pllreffreq * testn) / (testm * testp);
+				if (computed > clock)
+					tmpdelta = computed - clock;
+				else
+					tmpdelta = clock - computed;
+
+				if (tmpdelta < delta) {
+					delta = tmpdelta;
+					m = testm;
+					n = testn;
+					p = testp;
+				}
+			}
+		}
+	}
+
+	fvv = pllreffreq * n / m;
+	fvv = (fvv - 800000) / 50000;
+	if (fvv > 15)
+		fvv = 15;
+	s = fvv << 1;
+
+	if (delta > permitteddelta) {
+		pr_warn("PLL delta too large\n");
+		return -EINVAL;
+	}
+
+	pixpllc->m = m;
+	pixpllc->n = n;
+	pixpllc->p = p;
+	pixpllc->s = s;
+
+	return 0;
+}
+
+static void mgag200_g200se_04_pixpllc_atomic_update(struct drm_crtc *crtc,
+						    struct drm_atomic_state *old_state)
+{
+	struct drm_device *dev = crtc->dev;
+	struct mga_device *mdev = to_mga_device(dev);
+	struct drm_crtc_state *crtc_state = crtc->state;
+	struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state);
+	struct mgag200_pll_values *pixpllc = &mgag200_crtc_state->pixpllc;
+	unsigned int pixpllcm, pixpllcn, pixpllcp, pixpllcs;
+	u8 xpixpllcm, xpixpllcn, xpixpllcp;
+
+	pixpllcm = pixpllc->m - 1;
+	pixpllcn = pixpllc->n - 1;
+	pixpllcp = pixpllc->p - 1;
+	pixpllcs = pixpllc->s;
+
+	// For G200SE A, BIT(7) should be set unconditionally.
+	xpixpllcm = BIT(7) | pixpllcm;
+	xpixpllcn = pixpllcn;
+	xpixpllcp = (pixpllcs << 3) | pixpllcp;
+
+	WREG_MISC_MASKED(MGAREG_MISC_CLKSEL_MGA, MGAREG_MISC_CLKSEL_MASK);
+
+	WREG_DAC(MGA1064_PIX_PLLC_M, xpixpllcm);
+	WREG_DAC(MGA1064_PIX_PLLC_N, xpixpllcn);
+	WREG_DAC(MGA1064_PIX_PLLC_P, xpixpllcp);
+
+	WREG_DAC(0x1a, 0x09);
+	msleep(20);
+	WREG_DAC(0x1a, 0x01);
+}
+
+/*
+ * Mode-setting pipeline
+ */
+
+static const struct drm_plane_helper_funcs mgag200_g200se_primary_plane_helper_funcs = {
+	MGAG200_PRIMARY_PLANE_HELPER_FUNCS,
+};
+
+static const struct drm_plane_funcs mgag200_g200se_primary_plane_funcs = {
+	MGAG200_PRIMARY_PLANE_FUNCS,
+};
+
+static void mgag200_g200se_crtc_helper_atomic_enable(struct drm_crtc *crtc,
+						     struct drm_atomic_state *old_state)
+{
+	struct drm_device *dev = crtc->dev;
+	struct mga_device *mdev = to_mga_device(dev);
+	const struct mgag200_device_funcs *funcs = mdev->funcs;
+	struct drm_crtc_state *crtc_state = crtc->state;
+	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+	struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state);
+	const struct drm_format_info *format = mgag200_crtc_state->format;
+
+	if (funcs->disable_vidrst)
+		funcs->disable_vidrst(mdev);
+
+	mgag200_set_format_regs(mdev, format);
+	mgag200_set_mode_regs(mdev, adjusted_mode);
+
+	if (funcs->pixpllc_atomic_update)
+		funcs->pixpllc_atomic_update(crtc, old_state);
+
+	mgag200_g200se_set_hiprilvl(mdev, adjusted_mode, format);
+
+	mgag200_enable_display(mdev);
+
+	if (funcs->enable_vidrst)
+		funcs->enable_vidrst(mdev);
+}
+
+static const struct drm_crtc_helper_funcs mgag200_g200se_crtc_helper_funcs = {
+	.mode_valid = mgag200_crtc_helper_mode_valid,
+	.atomic_check = mgag200_crtc_helper_atomic_check,
+	.atomic_flush = mgag200_crtc_helper_atomic_flush,
+	.atomic_enable = mgag200_g200se_crtc_helper_atomic_enable,
+	.atomic_disable = mgag200_crtc_helper_atomic_disable
+};
+
+static const struct drm_crtc_funcs mgag200_g200se_crtc_funcs = {
+	MGAG200_CRTC_FUNCS,
+};
+
+static const struct drm_encoder_funcs mgag200_g200se_dac_encoder_funcs = {
+	MGAG200_DAC_ENCODER_FUNCS,
+};
+
+static const struct drm_connector_helper_funcs mgag200_g200se_vga_connector_helper_funcs = {
+	MGAG200_VGA_CONNECTOR_HELPER_FUNCS,
+};
+
+static const struct drm_connector_funcs mgag200_g200se_vga_connector_funcs = {
+	MGAG200_VGA_CONNECTOR_FUNCS,
+};
+
+static int mgag200_g200se_pipeline_init(struct mga_device *mdev)
+{
+	struct drm_device *dev = &mdev->base;
+	struct drm_plane *primary_plane = &mdev->primary_plane;
+	struct drm_crtc *crtc = &mdev->crtc;
+	struct drm_encoder *encoder = &mdev->encoder;
+	struct mga_i2c_chan *i2c = &mdev->i2c;
+	struct drm_connector *connector = &mdev->connector;
+	int ret;
+
+	ret = drm_universal_plane_init(dev, primary_plane, 0,
+				       &mgag200_g200se_primary_plane_funcs,
+				       mgag200_primary_plane_formats,
+				       mgag200_primary_plane_formats_size,
+				       mgag200_primary_plane_fmtmods,
+				       DRM_PLANE_TYPE_PRIMARY, NULL);
+	if (ret) {
+		drm_err(dev, "drm_universal_plane_init() failed: %d\n", ret);
+		return ret;
+	}
+	drm_plane_helper_add(primary_plane, &mgag200_g200se_primary_plane_helper_funcs);
+	drm_plane_enable_fb_damage_clips(primary_plane);
+
+	ret = drm_crtc_init_with_planes(dev, crtc, primary_plane, NULL,
+					&mgag200_g200se_crtc_funcs, NULL);
+	if (ret) {
+		drm_err(dev, "drm_crtc_init_with_planes() failed: %d\n", ret);
+		return ret;
+	}
+	drm_crtc_helper_add(crtc, &mgag200_g200se_crtc_helper_funcs);
+
+	/* FIXME: legacy gamma tables, but atomic gamma doesn't work without */
+	drm_mode_crtc_set_gamma_size(crtc, MGAG200_LUT_SIZE);
+	drm_crtc_enable_color_mgmt(crtc, 0, false, MGAG200_LUT_SIZE);
+
+	encoder->possible_crtcs = drm_crtc_mask(crtc);
+	ret = drm_encoder_init(dev, encoder, &mgag200_g200se_dac_encoder_funcs,
+			       DRM_MODE_ENCODER_DAC, NULL);
+	if (ret) {
+		drm_err(dev, "drm_encoder_init() failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = mgag200_i2c_init(mdev, i2c);
+	if (ret) {
+		drm_err(dev, "failed to add DDC bus: %d\n", ret);
+		return ret;
+	}
+
+	ret = drm_connector_init_with_ddc(dev, connector,
+					  &mgag200_g200se_vga_connector_funcs,
+					  DRM_MODE_CONNECTOR_VGA,
+					  &i2c->adapter);
+	if (ret) {
+		drm_err(dev, "drm_connector_init_with_ddc() failed: %d\n", ret);
+		return ret;
+	}
+	drm_connector_helper_add(connector, &mgag200_g200se_vga_connector_helper_funcs);
+
+	ret = drm_connector_attach_encoder(connector, encoder);
+	if (ret) {
+		drm_err(dev, "drm_connector_attach_encoder() failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * DRM device
+ */
+
+static const struct mgag200_device_info mgag200_g200se_a_01_device_info =
+	MGAG200_DEVICE_INFO_INIT(1600, 1200, 24400, false, 0, 1, true);
+
+static const struct mgag200_device_info mgag200_g200se_a_02_device_info =
+	MGAG200_DEVICE_INFO_INIT(1920, 1200, 30100, false, 0, 1, true);
+
+static const struct mgag200_device_info mgag200_g200se_a_03_device_info =
+	MGAG200_DEVICE_INFO_INIT(2048, 2048, 55000, false, 0, 1, false);
+
+static const struct mgag200_device_info mgag200_g200se_b_01_device_info =
+	MGAG200_DEVICE_INFO_INIT(1600, 1200, 24400, false, 0, 1, false);
+
+static const struct mgag200_device_info mgag200_g200se_b_02_device_info =
+	MGAG200_DEVICE_INFO_INIT(1920, 1200, 30100, false, 0, 1, false);
+
+static const struct mgag200_device_info mgag200_g200se_b_03_device_info =
+	MGAG200_DEVICE_INFO_INIT(2048, 2048, 55000, false, 0, 1, false);
+
+static int mgag200_g200se_init_unique_rev_id(struct mgag200_g200se_device *g200se)
+{
+	struct mga_device *mdev = &g200se->base;
+	struct drm_device *dev = &mdev->base;
+
+	/* stash G200 SE model number for later use */
+	g200se->unique_rev_id = RREG32(0x1e24);
+	if (!g200se->unique_rev_id)
+		return -ENODEV;
+
+	drm_dbg(dev, "G200 SE unique revision id is 0x%x\n", g200se->unique_rev_id);
+
+	return 0;
+}
+
+static const struct mgag200_device_funcs mgag200_g200se_00_device_funcs = {
+	.pixpllc_atomic_check = mgag200_g200se_00_pixpllc_atomic_check,
+	.pixpllc_atomic_update = mgag200_g200se_00_pixpllc_atomic_update,
+};
+
+static const struct mgag200_device_funcs mgag200_g200se_04_device_funcs = {
+	.pixpllc_atomic_check = mgag200_g200se_04_pixpllc_atomic_check,
+	.pixpllc_atomic_update = mgag200_g200se_04_pixpllc_atomic_update,
+};
+
+struct mga_device *mgag200_g200se_device_create(struct pci_dev *pdev, const struct drm_driver *drv,
+						enum mga_type type)
+{
+	struct mgag200_g200se_device *g200se;
+	const struct mgag200_device_info *info;
+	const struct mgag200_device_funcs *funcs;
+	struct mga_device *mdev;
+	struct drm_device *dev;
+	resource_size_t vram_available;
+	int ret;
+
+	g200se = devm_drm_dev_alloc(&pdev->dev, drv, struct mgag200_g200se_device, base.base);
+	if (IS_ERR(g200se))
+		return ERR_CAST(g200se);
+	mdev = &g200se->base;
+	dev = &mdev->base;
+
+	pci_set_drvdata(pdev, dev);
+
+	ret = mgag200_g200se_init_pci_options(pdev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = mgag200_device_preinit(mdev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = mgag200_g200se_init_unique_rev_id(g200se);
+	if (ret)
+		return ERR_PTR(ret);
+
+	switch (type) {
+	case G200_SE_A:
+		if (g200se->unique_rev_id >= 0x03)
+			info = &mgag200_g200se_a_03_device_info;
+		else if (g200se->unique_rev_id >= 0x02)
+			info = &mgag200_g200se_a_02_device_info;
+		else
+			info = &mgag200_g200se_a_01_device_info;
+		break;
+	case G200_SE_B:
+		if (g200se->unique_rev_id >= 0x03)
+			info = &mgag200_g200se_b_03_device_info;
+		else if (g200se->unique_rev_id >= 0x02)
+			info = &mgag200_g200se_b_02_device_info;
+		else
+			info = &mgag200_g200se_b_01_device_info;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (g200se->unique_rev_id >= 0x04)
+		funcs = &mgag200_g200se_04_device_funcs;
+	else
+		funcs = &mgag200_g200se_00_device_funcs;
+
+	ret = mgag200_device_init(mdev, info, funcs);
+	if (ret)
+		return ERR_PTR(ret);
+
+	mgag200_g200se_init_registers(g200se);
+
+	vram_available = mgag200_device_probe_vram(mdev);
+
+	ret = mgag200_mode_config_init(mdev, vram_available);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = mgag200_g200se_pipeline_init(mdev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	drm_mode_config_reset(dev);
+
+	return mdev;
+}