Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 445 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/disp/mdp4/mdp4_lcdc_encoder.c b/drivers/gpu/drm/msm/disp/mdp4/mdp4_lcdc_encoder.c
new file mode 100644
index 000000000..10eb3e5b2
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/mdp4/mdp4_lcdc_encoder.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ * Author: Vinay Simha <vinaysimha@inforcecomputing.com>
+ */
+
+#include <linux/delay.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_probe_helper.h>
+
+#include "mdp4_kms.h"
+
+struct mdp4_lcdc_encoder {
+	struct drm_encoder base;
+	struct device_node *panel_node;
+	struct drm_panel *panel;
+	struct clk *lcdc_clk;
+	unsigned long int pixclock;
+	struct regulator *regs[3];
+	bool enabled;
+	uint32_t bsc;
+};
+#define to_mdp4_lcdc_encoder(x) container_of(x, struct mdp4_lcdc_encoder, base)
+
+static struct mdp4_kms *get_kms(struct drm_encoder *encoder)
+{
+	struct msm_drm_private *priv = encoder->dev->dev_private;
+	return to_mdp4_kms(to_mdp_kms(priv->kms));
+}
+
+static void mdp4_lcdc_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct mdp4_lcdc_encoder *mdp4_lcdc_encoder =
+			to_mdp4_lcdc_encoder(encoder);
+	drm_encoder_cleanup(encoder);
+	kfree(mdp4_lcdc_encoder);
+}
+
+static const struct drm_encoder_funcs mdp4_lcdc_encoder_funcs = {
+	.destroy = mdp4_lcdc_encoder_destroy,
+};
+
+/* this should probably be a helper: */
+static struct drm_connector *get_connector(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		if (connector->encoder == encoder)
+			return connector;
+
+	return NULL;
+}
+
+static void setup_phy(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_connector *connector = get_connector(encoder);
+	struct mdp4_kms *mdp4_kms = get_kms(encoder);
+	uint32_t lvds_intf = 0, lvds_phy_cfg0 = 0;
+	int bpp, nchan, swap;
+
+	if (!connector)
+		return;
+
+	bpp = 3 * connector->display_info.bpc;
+
+	if (!bpp)
+		bpp = 18;
+
+	/* TODO, these should come from panel somehow: */
+	nchan = 1;
+	swap = 0;
+
+	switch (bpp) {
+	case 24:
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_3_TO_0(0),
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT0(0x08) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT1(0x05) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT2(0x04) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT3(0x03));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_6_TO_4(0),
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT4(0x02) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT5(0x01) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT6(0x00));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_3_TO_0(1),
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT0(0x11) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT1(0x10) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT2(0x0d) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT3(0x0c));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_6_TO_4(1),
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT4(0x0b) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT5(0x0a) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT6(0x09));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_3_TO_0(2),
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT0(0x1a) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT1(0x19) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT2(0x18) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT3(0x15));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_6_TO_4(2),
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT4(0x14) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT5(0x13) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT6(0x12));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_3_TO_0(3),
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT0(0x1b) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT1(0x17) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT2(0x16) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT3(0x0f));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_6_TO_4(3),
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT4(0x0e) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT5(0x07) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT6(0x06));
+		if (nchan == 2) {
+			lvds_intf |= MDP4_LCDC_LVDS_INTF_CTL_CH2_DATA_LANE3_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH2_DATA_LANE2_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH2_DATA_LANE1_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH2_DATA_LANE0_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE3_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE2_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE1_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE0_EN;
+		} else {
+			lvds_intf |= MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE3_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE2_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE1_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE0_EN;
+		}
+		break;
+
+	case 18:
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_3_TO_0(0),
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT0(0x0a) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT1(0x07) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT2(0x06) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT3(0x05));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_6_TO_4(0),
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT4(0x04) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT5(0x03) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT6(0x02));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_3_TO_0(1),
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT0(0x13) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT1(0x12) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT2(0x0f) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT3(0x0e));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_6_TO_4(1),
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT4(0x0d) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT5(0x0c) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT6(0x0b));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_3_TO_0(2),
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT0(0x1a) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT1(0x19) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT2(0x18) |
+				MDP4_LCDC_LVDS_MUX_CTL_3_TO_0_BIT3(0x17));
+		mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_MUX_CTL_6_TO_4(2),
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT4(0x16) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT5(0x15) |
+				MDP4_LCDC_LVDS_MUX_CTL_6_TO_4_BIT6(0x14));
+		if (nchan == 2) {
+			lvds_intf |= MDP4_LCDC_LVDS_INTF_CTL_CH2_DATA_LANE2_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH2_DATA_LANE1_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH2_DATA_LANE0_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE2_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE1_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE0_EN;
+		} else {
+			lvds_intf |= MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE2_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE1_EN |
+					MDP4_LCDC_LVDS_INTF_CTL_CH1_DATA_LANE0_EN;
+		}
+		lvds_intf |= MDP4_LCDC_LVDS_INTF_CTL_RGB_OUT;
+		break;
+
+	default:
+		DRM_DEV_ERROR(dev->dev, "unknown bpp: %d\n", bpp);
+		return;
+	}
+
+	switch (nchan) {
+	case 1:
+		lvds_phy_cfg0 = MDP4_LVDS_PHY_CFG0_CHANNEL0;
+		lvds_intf |= MDP4_LCDC_LVDS_INTF_CTL_CH1_CLK_LANE_EN |
+				MDP4_LCDC_LVDS_INTF_CTL_MODE_SEL;
+		break;
+	case 2:
+		lvds_phy_cfg0 = MDP4_LVDS_PHY_CFG0_CHANNEL0 |
+				MDP4_LVDS_PHY_CFG0_CHANNEL1;
+		lvds_intf |= MDP4_LCDC_LVDS_INTF_CTL_CH2_CLK_LANE_EN |
+				MDP4_LCDC_LVDS_INTF_CTL_CH1_CLK_LANE_EN;
+		break;
+	default:
+		DRM_DEV_ERROR(dev->dev, "unknown # of channels: %d\n", nchan);
+		return;
+	}
+
+	if (swap)
+		lvds_intf |= MDP4_LCDC_LVDS_INTF_CTL_CH_SWAP;
+
+	lvds_intf |= MDP4_LCDC_LVDS_INTF_CTL_ENABLE;
+
+	mdp4_write(mdp4_kms, REG_MDP4_LVDS_PHY_CFG0, lvds_phy_cfg0);
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_INTF_CTL, lvds_intf);
+	mdp4_write(mdp4_kms, REG_MDP4_LVDS_PHY_CFG2, 0x30);
+
+	mb();
+	udelay(1);
+	lvds_phy_cfg0 |= MDP4_LVDS_PHY_CFG0_SERIALIZATION_ENBLE;
+	mdp4_write(mdp4_kms, REG_MDP4_LVDS_PHY_CFG0, lvds_phy_cfg0);
+}
+
+static void mdp4_lcdc_encoder_mode_set(struct drm_encoder *encoder,
+		struct drm_display_mode *mode,
+		struct drm_display_mode *adjusted_mode)
+{
+	struct mdp4_lcdc_encoder *mdp4_lcdc_encoder =
+			to_mdp4_lcdc_encoder(encoder);
+	struct mdp4_kms *mdp4_kms = get_kms(encoder);
+	uint32_t lcdc_hsync_skew, vsync_period, vsync_len, ctrl_pol;
+	uint32_t display_v_start, display_v_end;
+	uint32_t hsync_start_x, hsync_end_x;
+
+	mode = adjusted_mode;
+
+	DBG("set mode: " DRM_MODE_FMT, DRM_MODE_ARG(mode));
+
+	mdp4_lcdc_encoder->pixclock = mode->clock * 1000;
+
+	DBG("pixclock=%lu", mdp4_lcdc_encoder->pixclock);
+
+	ctrl_pol = 0;
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		ctrl_pol |= MDP4_LCDC_CTRL_POLARITY_HSYNC_LOW;
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		ctrl_pol |= MDP4_LCDC_CTRL_POLARITY_VSYNC_LOW;
+	/* probably need to get DATA_EN polarity from panel.. */
+
+	lcdc_hsync_skew = 0;  /* get this from panel? */
+
+	hsync_start_x = (mode->htotal - mode->hsync_start);
+	hsync_end_x = mode->htotal - (mode->hsync_start - mode->hdisplay) - 1;
+
+	vsync_period = mode->vtotal * mode->htotal;
+	vsync_len = (mode->vsync_end - mode->vsync_start) * mode->htotal;
+	display_v_start = (mode->vtotal - mode->vsync_start) * mode->htotal + lcdc_hsync_skew;
+	display_v_end = vsync_period - ((mode->vsync_start - mode->vdisplay) * mode->htotal) + lcdc_hsync_skew - 1;
+
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_HSYNC_CTRL,
+			MDP4_LCDC_HSYNC_CTRL_PULSEW(mode->hsync_end - mode->hsync_start) |
+			MDP4_LCDC_HSYNC_CTRL_PERIOD(mode->htotal));
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_VSYNC_PERIOD, vsync_period);
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_VSYNC_LEN, vsync_len);
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_DISPLAY_HCTRL,
+			MDP4_LCDC_DISPLAY_HCTRL_START(hsync_start_x) |
+			MDP4_LCDC_DISPLAY_HCTRL_END(hsync_end_x));
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_DISPLAY_VSTART, display_v_start);
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_DISPLAY_VEND, display_v_end);
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_BORDER_CLR, 0);
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_UNDERFLOW_CLR,
+			MDP4_LCDC_UNDERFLOW_CLR_ENABLE_RECOVERY |
+			MDP4_LCDC_UNDERFLOW_CLR_COLOR(0xff));
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_HSYNC_SKEW, lcdc_hsync_skew);
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_CTRL_POLARITY, ctrl_pol);
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_ACTIVE_HCTL,
+			MDP4_LCDC_ACTIVE_HCTL_START(0) |
+			MDP4_LCDC_ACTIVE_HCTL_END(0));
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_ACTIVE_VSTART, 0);
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_ACTIVE_VEND, 0);
+}
+
+static void mdp4_lcdc_encoder_disable(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct mdp4_lcdc_encoder *mdp4_lcdc_encoder =
+			to_mdp4_lcdc_encoder(encoder);
+	struct mdp4_kms *mdp4_kms = get_kms(encoder);
+	struct drm_panel *panel;
+	int i, ret;
+
+	if (WARN_ON(!mdp4_lcdc_encoder->enabled))
+		return;
+
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_ENABLE, 0);
+
+	panel = of_drm_find_panel(mdp4_lcdc_encoder->panel_node);
+	if (!IS_ERR(panel)) {
+		drm_panel_disable(panel);
+		drm_panel_unprepare(panel);
+	}
+
+	/*
+	 * Wait for a vsync so we know the ENABLE=0 latched before
+	 * the (connector) source of the vsync's gets disabled,
+	 * otherwise we end up in a funny state if we re-enable
+	 * before the disable latches, which results that some of
+	 * the settings changes for the new modeset (like new
+	 * scanout buffer) don't latch properly..
+	 */
+	mdp_irq_wait(&mdp4_kms->base, MDP4_IRQ_PRIMARY_VSYNC);
+
+	clk_disable_unprepare(mdp4_lcdc_encoder->lcdc_clk);
+
+	for (i = 0; i < ARRAY_SIZE(mdp4_lcdc_encoder->regs); i++) {
+		ret = regulator_disable(mdp4_lcdc_encoder->regs[i]);
+		if (ret)
+			DRM_DEV_ERROR(dev->dev, "failed to disable regulator: %d\n", ret);
+	}
+
+	mdp4_lcdc_encoder->enabled = false;
+}
+
+static void mdp4_lcdc_encoder_enable(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct mdp4_lcdc_encoder *mdp4_lcdc_encoder =
+			to_mdp4_lcdc_encoder(encoder);
+	unsigned long pc = mdp4_lcdc_encoder->pixclock;
+	struct mdp4_kms *mdp4_kms = get_kms(encoder);
+	struct drm_panel *panel;
+	uint32_t config;
+	int i, ret;
+
+	if (WARN_ON(mdp4_lcdc_encoder->enabled))
+		return;
+
+	/* TODO: hard-coded for 18bpp: */
+	config =
+		MDP4_DMA_CONFIG_R_BPC(BPC6) |
+		MDP4_DMA_CONFIG_G_BPC(BPC6) |
+		MDP4_DMA_CONFIG_B_BPC(BPC6) |
+		MDP4_DMA_CONFIG_PACK(0x21) |
+		MDP4_DMA_CONFIG_DEFLKR_EN |
+		MDP4_DMA_CONFIG_DITHER_EN;
+
+	if (!of_property_read_bool(dev->dev->of_node, "qcom,lcdc-align-lsb"))
+		config |= MDP4_DMA_CONFIG_PACK_ALIGN_MSB;
+
+	mdp4_crtc_set_config(encoder->crtc, config);
+	mdp4_crtc_set_intf(encoder->crtc, INTF_LCDC_DTV, 0);
+
+	for (i = 0; i < ARRAY_SIZE(mdp4_lcdc_encoder->regs); i++) {
+		ret = regulator_enable(mdp4_lcdc_encoder->regs[i]);
+		if (ret)
+			DRM_DEV_ERROR(dev->dev, "failed to enable regulator: %d\n", ret);
+	}
+
+	DBG("setting lcdc_clk=%lu", pc);
+	ret = clk_set_rate(mdp4_lcdc_encoder->lcdc_clk, pc);
+	if (ret)
+		DRM_DEV_ERROR(dev->dev, "failed to configure lcdc_clk: %d\n", ret);
+	ret = clk_prepare_enable(mdp4_lcdc_encoder->lcdc_clk);
+	if (ret)
+		DRM_DEV_ERROR(dev->dev, "failed to enable lcdc_clk: %d\n", ret);
+
+	panel = of_drm_find_panel(mdp4_lcdc_encoder->panel_node);
+	if (!IS_ERR(panel)) {
+		drm_panel_prepare(panel);
+		drm_panel_enable(panel);
+	}
+
+	setup_phy(encoder);
+
+	mdp4_write(mdp4_kms, REG_MDP4_LCDC_ENABLE, 1);
+
+	mdp4_lcdc_encoder->enabled = true;
+}
+
+static const struct drm_encoder_helper_funcs mdp4_lcdc_encoder_helper_funcs = {
+	.mode_set = mdp4_lcdc_encoder_mode_set,
+	.disable = mdp4_lcdc_encoder_disable,
+	.enable = mdp4_lcdc_encoder_enable,
+};
+
+long mdp4_lcdc_round_pixclk(struct drm_encoder *encoder, unsigned long rate)
+{
+	struct mdp4_lcdc_encoder *mdp4_lcdc_encoder =
+			to_mdp4_lcdc_encoder(encoder);
+	return clk_round_rate(mdp4_lcdc_encoder->lcdc_clk, rate);
+}
+
+/* initialize encoder */
+struct drm_encoder *mdp4_lcdc_encoder_init(struct drm_device *dev,
+		struct device_node *panel_node)
+{
+	struct drm_encoder *encoder = NULL;
+	struct mdp4_lcdc_encoder *mdp4_lcdc_encoder;
+	struct regulator *reg;
+	int ret;
+
+	mdp4_lcdc_encoder = kzalloc(sizeof(*mdp4_lcdc_encoder), GFP_KERNEL);
+	if (!mdp4_lcdc_encoder) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	mdp4_lcdc_encoder->panel_node = panel_node;
+
+	encoder = &mdp4_lcdc_encoder->base;
+
+	drm_encoder_init(dev, encoder, &mdp4_lcdc_encoder_funcs,
+			 DRM_MODE_ENCODER_LVDS, NULL);
+	drm_encoder_helper_add(encoder, &mdp4_lcdc_encoder_helper_funcs);
+
+	/* TODO: do we need different pll in other cases? */
+	mdp4_lcdc_encoder->lcdc_clk = mpd4_lvds_pll_init(dev);
+	if (IS_ERR(mdp4_lcdc_encoder->lcdc_clk)) {
+		DRM_DEV_ERROR(dev->dev, "failed to get lvds_clk\n");
+		ret = PTR_ERR(mdp4_lcdc_encoder->lcdc_clk);
+		goto fail;
+	}
+
+	/* TODO: different regulators in other cases? */
+	reg = devm_regulator_get(dev->dev, "lvds-vccs-3p3v");
+	if (IS_ERR(reg)) {
+		ret = PTR_ERR(reg);
+		DRM_DEV_ERROR(dev->dev, "failed to get lvds-vccs-3p3v: %d\n", ret);
+		goto fail;
+	}
+	mdp4_lcdc_encoder->regs[0] = reg;
+
+	reg = devm_regulator_get(dev->dev, "lvds-pll-vdda");
+	if (IS_ERR(reg)) {
+		ret = PTR_ERR(reg);
+		DRM_DEV_ERROR(dev->dev, "failed to get lvds-pll-vdda: %d\n", ret);
+		goto fail;
+	}
+	mdp4_lcdc_encoder->regs[1] = reg;
+
+	reg = devm_regulator_get(dev->dev, "lvds-vdda");
+	if (IS_ERR(reg)) {
+		ret = PTR_ERR(reg);
+		DRM_DEV_ERROR(dev->dev, "failed to get lvds-vdda: %d\n", ret);
+		goto fail;
+	}
+	mdp4_lcdc_encoder->regs[2] = reg;
+
+	return encoder;
+
+fail:
+	if (encoder)
+		mdp4_lcdc_encoder_destroy(encoder);
+
+	return ERR_PTR(ret);
+}