Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 325 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
new file mode 100644
index 000000000..7e97c239e
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#include "dsi_cfg.h"
+
+static const char * const dsi_v2_bus_clk_names[] = {
+	"core_mmss", "iface", "bus",
+};
+
+static const struct regulator_bulk_data apq8064_dsi_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 100000 },	/* 1.2 V */
+	{ .supply = "avdd", .init_load_uA = 10000 },	/* 3.0 V */
+	{ .supply = "vddio", .init_load_uA = 100000 },	/* 1.8 V */
+};
+
+static const struct msm_dsi_config apq8064_dsi_cfg = {
+	.io_offset = 0,
+	.regulator_data = apq8064_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(apq8064_dsi_regulators),
+	.bus_clk_names = dsi_v2_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_v2_bus_clk_names),
+	.io_start = { 0x4700000, 0x5800000 },
+	.num_dsi = 2,
+};
+
+static const char * const dsi_6g_bus_clk_names[] = {
+	"mdp_core", "iface", "bus", "core_mmss",
+};
+
+static const struct regulator_bulk_data msm8974_apq8084_regulators[] = {
+	{ .supply = "vdd", .init_load_uA = 150000 },	/* 3.0 V */
+	{ .supply = "vdda", .init_load_uA = 100000 },	/* 1.2 V */
+	{ .supply = "vddio", .init_load_uA = 100000 },	/* 1.8 V */
+};
+
+static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = msm8974_apq8084_regulators,
+	.num_regulators = ARRAY_SIZE(msm8974_apq8084_regulators),
+	.bus_clk_names = dsi_6g_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
+	.io_start = { 0xfd922800, 0xfd922b00 },
+	.num_dsi = 2,
+};
+
+static const char * const dsi_8916_bus_clk_names[] = {
+	"mdp_core", "iface", "bus",
+};
+
+static const struct regulator_bulk_data msm8916_dsi_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 100000 },	/* 1.2 V */
+	{ .supply = "vddio", .init_load_uA = 100000 },	/* 1.8 V */
+};
+
+static const struct msm_dsi_config msm8916_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = msm8916_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(msm8916_dsi_regulators),
+	.bus_clk_names = dsi_8916_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_8916_bus_clk_names),
+	.io_start = { 0x1a98000 },
+	.num_dsi = 1,
+};
+
+static const char * const dsi_8976_bus_clk_names[] = {
+	"mdp_core", "iface", "bus",
+};
+
+static const struct regulator_bulk_data msm8976_dsi_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 100000 },	/* 1.2 V */
+	{ .supply = "vddio", .init_load_uA = 100000 },	/* 1.8 V */
+};
+
+static const struct msm_dsi_config msm8976_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = msm8976_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(msm8976_dsi_regulators),
+	.bus_clk_names = dsi_8976_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_8976_bus_clk_names),
+	.io_start = { 0x1a94000, 0x1a96000 },
+	.num_dsi = 2,
+};
+
+static const struct regulator_bulk_data msm8994_dsi_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 100000 },	/* 1.25 V */
+	{ .supply = "vddio", .init_load_uA = 100000 },	/* 1.8 V */
+	{ .supply = "vcca", .init_load_uA = 10000 },	/* 1.0 V */
+	{ .supply = "vdd", .init_load_uA = 100000 },	/* 1.8 V */
+	{ .supply = "lab_reg", .init_load_uA = -1 },
+	{ .supply = "ibb_reg", .init_load_uA = -1 },
+};
+
+static const struct msm_dsi_config msm8994_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = msm8994_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(msm8994_dsi_regulators),
+	.bus_clk_names = dsi_6g_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
+	.io_start = { 0xfd998000, 0xfd9a0000 },
+	.num_dsi = 2,
+};
+
+static const char * const dsi_8996_bus_clk_names[] = {
+	"mdp_core", "iface", "bus", "core_mmss",
+};
+
+static const struct regulator_bulk_data msm8996_dsi_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 18160 },	/* 1.25 V */
+	{ .supply = "vcca", .init_load_uA = 17000 },	/* 0.925 V */
+	{ .supply = "vddio", .init_load_uA = 100000 },	/* 1.8 V */
+};
+
+static const struct msm_dsi_config msm8996_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = msm8996_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(msm8996_dsi_regulators),
+	.bus_clk_names = dsi_8996_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_8996_bus_clk_names),
+	.io_start = { 0x994000, 0x996000 },
+	.num_dsi = 2,
+};
+
+static const char * const dsi_msm8998_bus_clk_names[] = {
+	"iface", "bus", "core",
+};
+
+static const struct regulator_bulk_data msm8998_dsi_regulators[] = {
+	{ .supply = "vdd", .init_load_uA = 367000 },	/* 0.9 V */
+	{ .supply = "vdda", .init_load_uA = 62800 },	/* 1.2 V */
+};
+
+static const struct msm_dsi_config msm8998_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = msm8998_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(msm8998_dsi_regulators),
+	.bus_clk_names = dsi_msm8998_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_msm8998_bus_clk_names),
+	.io_start = { 0xc994000, 0xc996000 },
+	.num_dsi = 2,
+};
+
+static const char * const dsi_sdm660_bus_clk_names[] = {
+	"iface", "bus", "core", "core_mmss",
+};
+
+static const struct regulator_bulk_data sdm660_dsi_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 12560 },	/* 1.2 V */
+};
+
+static const struct msm_dsi_config sdm660_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = sdm660_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(sdm660_dsi_regulators),
+	.bus_clk_names = dsi_sdm660_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_sdm660_bus_clk_names),
+	.io_start = { 0xc994000, 0xc996000 },
+	.num_dsi = 2,
+};
+
+static const char * const dsi_sdm845_bus_clk_names[] = {
+	"iface", "bus",
+};
+
+static const char * const dsi_sc7180_bus_clk_names[] = {
+	"iface", "bus",
+};
+
+static const struct regulator_bulk_data sdm845_dsi_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 21800 },	/* 1.2 V */
+};
+
+static const struct msm_dsi_config sdm845_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = sdm845_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(sdm845_dsi_regulators),
+	.bus_clk_names = dsi_sdm845_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_sdm845_bus_clk_names),
+	.io_start = { 0xae94000, 0xae96000 },
+	.num_dsi = 2,
+};
+
+static const struct regulator_bulk_data sc7180_dsi_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 21800 },	/* 1.2 V */
+};
+
+static const struct msm_dsi_config sc7180_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = sc7180_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(sc7180_dsi_regulators),
+	.bus_clk_names = dsi_sc7180_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_sc7180_bus_clk_names),
+	.io_start = { 0xae94000 },
+	.num_dsi = 1,
+};
+
+static const char * const dsi_sc7280_bus_clk_names[] = {
+	"iface", "bus",
+};
+
+static const struct regulator_bulk_data sc7280_dsi_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 8350 },	/* 1.2 V */
+};
+
+static const struct msm_dsi_config sc7280_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = sc7280_dsi_regulators,
+	.num_regulators = ARRAY_SIZE(sc7280_dsi_regulators),
+	.bus_clk_names = dsi_sc7280_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_sc7280_bus_clk_names),
+	.io_start = { 0xae94000 },
+	.num_dsi = 1,
+};
+
+static const char * const dsi_qcm2290_bus_clk_names[] = {
+	"iface", "bus",
+};
+
+static const struct regulator_bulk_data qcm2290_dsi_cfg_regulators[] = {
+	{ .supply = "vdda", .init_load_uA = 21800 },	/* 1.2 V */
+};
+
+static const struct msm_dsi_config qcm2290_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.regulator_data = qcm2290_dsi_cfg_regulators,
+	.num_regulators = ARRAY_SIZE(qcm2290_dsi_cfg_regulators),
+	.bus_clk_names = dsi_qcm2290_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_qcm2290_bus_clk_names),
+	.io_start = { 0x5e94000 },
+	.num_dsi = 1,
+};
+
+static const struct msm_dsi_host_cfg_ops msm_dsi_v2_host_ops = {
+	.link_clk_set_rate = dsi_link_clk_set_rate_v2,
+	.link_clk_enable = dsi_link_clk_enable_v2,
+	.link_clk_disable = dsi_link_clk_disable_v2,
+	.clk_init_ver = dsi_clk_init_v2,
+	.tx_buf_alloc = dsi_tx_buf_alloc_v2,
+	.tx_buf_get = dsi_tx_buf_get_v2,
+	.tx_buf_put = NULL,
+	.dma_base_get = dsi_dma_base_get_v2,
+	.calc_clk_rate = dsi_calc_clk_rate_v2,
+};
+
+static const struct msm_dsi_host_cfg_ops msm_dsi_6g_host_ops = {
+	.link_clk_set_rate = dsi_link_clk_set_rate_6g,
+	.link_clk_enable = dsi_link_clk_enable_6g,
+	.link_clk_disable = dsi_link_clk_disable_6g,
+	.clk_init_ver = NULL,
+	.tx_buf_alloc = dsi_tx_buf_alloc_6g,
+	.tx_buf_get = dsi_tx_buf_get_6g,
+	.tx_buf_put = dsi_tx_buf_put_6g,
+	.dma_base_get = dsi_dma_base_get_6g,
+	.calc_clk_rate = dsi_calc_clk_rate_6g,
+};
+
+static const struct msm_dsi_host_cfg_ops msm_dsi_6g_v2_host_ops = {
+	.link_clk_set_rate = dsi_link_clk_set_rate_6g,
+	.link_clk_enable = dsi_link_clk_enable_6g,
+	.link_clk_disable = dsi_link_clk_disable_6g,
+	.clk_init_ver = dsi_clk_init_6g_v2,
+	.tx_buf_alloc = dsi_tx_buf_alloc_6g,
+	.tx_buf_get = dsi_tx_buf_get_6g,
+	.tx_buf_put = dsi_tx_buf_put_6g,
+	.dma_base_get = dsi_dma_base_get_6g,
+	.calc_clk_rate = dsi_calc_clk_rate_6g,
+};
+
+static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
+	{MSM_DSI_VER_MAJOR_V2, MSM_DSI_V2_VER_MINOR_8064,
+		&apq8064_dsi_cfg, &msm_dsi_v2_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_0,
+		&msm8974_apq8084_dsi_cfg, &msm_dsi_6g_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_1,
+		&msm8974_apq8084_dsi_cfg, &msm_dsi_6g_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_1_1,
+		&msm8974_apq8084_dsi_cfg, &msm_dsi_6g_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_2,
+		&msm8974_apq8084_dsi_cfg, &msm_dsi_6g_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_3,
+		&msm8994_dsi_cfg, &msm_dsi_6g_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_3_1,
+		&msm8916_dsi_cfg, &msm_dsi_6g_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_4_1,
+		&msm8996_dsi_cfg, &msm_dsi_6g_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_4_2,
+		&msm8976_dsi_cfg, &msm_dsi_6g_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_1_0,
+		&sdm660_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_2_0,
+		&msm8998_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_2_1,
+		&sdm845_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_3_0,
+		&sdm845_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_4_0,
+		&sdm845_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_4_1,
+		&sc7180_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_5_0,
+		&sc7280_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+};
+
+const struct msm_dsi_cfg_handler *msm_dsi_cfg_get(u32 major, u32 minor)
+{
+	const struct msm_dsi_cfg_handler *cfg_hnd = NULL;
+	int i;
+
+	for (i = ARRAY_SIZE(dsi_cfg_handlers) - 1; i >= 0; i--) {
+		if ((dsi_cfg_handlers[i].major == major) &&
+			(dsi_cfg_handlers[i].minor == minor)) {
+			cfg_hnd = &dsi_cfg_handlers[i];
+			break;
+		}
+	}
+
+	return cfg_hnd;
+}
+
+/*  Non autodetect configs */
+const struct msm_dsi_cfg_handler qcm2290_dsi_cfg_handler = {
+	.cfg = &qcm2290_dsi_cfg,
+	.ops = &msm_dsi_6g_v2_host_ops,
+};