Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 855 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
new file mode 100644
index 000000000..ee6051367
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "dsi_phy.h"
+
+#define S_DIV_ROUND_UP(n, d)	\
+	(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
+
+static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
+				s32 min_result, bool even)
+{
+	s32 v;
+
+	v = (tmax - tmin) * percent;
+	v = S_DIV_ROUND_UP(v, 100) + tmin;
+	if (even && (v & 0x1))
+		return max_t(s32, min_result, v - 1);
+	else
+		return max_t(s32, min_result, v);
+}
+
+static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
+					s32 ui, s32 coeff, s32 pcnt)
+{
+	s32 tmax, tmin, clk_z;
+	s32 temp;
+
+	/* reset */
+	temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+	if (tmin > 255) {
+		tmax = 511;
+		clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
+	} else {
+		tmax = 255;
+		clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
+	}
+
+	/* adjust */
+	temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
+	timing->clk_zero = clk_z + 8 - temp;
+}
+
+int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
+			     struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, lpx;
+	s32 tmax, tmin;
+	s32 pcnt0 = 10;
+	s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
+	s32 pcnt2 = 10;
+	s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+	tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
+	tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
+	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
+
+	temp = lpx / ui;
+	if (temp & 0x1)
+		timing->hs_rqst = temp;
+	else
+		timing->hs_rqst = max_t(s32, 0, temp - 2);
+
+	/* Calculate clk_zero after clk_prepare and hs_rqst */
+	dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
+
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+	tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
+	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+	temp = 85 * coeff + 6 * ui;
+	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+	temp = 40 * coeff + 4 * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
+
+	tmax = 255;
+	temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
+	temp = 145 * coeff + 10 * ui - temp;
+	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+	timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
+
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+	temp = 60 * coeff + 4 * ui;
+	tmin = DIV_ROUND_UP(temp, ui) - 2;
+	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+	tmax = 255;
+	tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
+	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
+
+	tmax = 63;
+	temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
+	temp = 60 * coeff + 52 * ui - 24 * ui - temp;
+	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+	timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0,
+						       false);
+	tmax = 63;
+	temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+	temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
+	temp += 8 * ui + lpx;
+	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+	if (tmin > tmax) {
+		temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre = temp >> 1;
+		timing->shared_timings.clk_pre_inc_by_2 = true;
+	} else {
+		timing->shared_timings.clk_pre =
+				linear_inter(tmax, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre_inc_by_2 = false;
+	}
+
+	timing->ta_go = 3;
+	timing->ta_sure = 0;
+	timing->ta_get = 4;
+
+	DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+		timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+		timing->hs_rqst);
+
+	return 0;
+}
+
+int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
+				struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, ui_x8;
+	s32 tmax, tmin;
+	s32 pcnt0 = 50;
+	s32 pcnt1 = 50;
+	s32 pcnt2 = 10;
+	s32 pcnt3 = 30;
+	s32 pcnt4 = 10;
+	s32 pcnt5 = 2;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 hb_en, hb_en_ckln, pd_ckln, pd;
+	s32 val, val_ckln;
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	timing->hs_halfbyte_en = 0;
+	hb_en = 0;
+	timing->hs_halfbyte_en_ckln = 0;
+	hb_en_ckln = 0;
+	timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3;
+	pd_ckln = timing->hs_prep_dly_ckln;
+	timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1;
+	pd = timing->hs_prep_dly;
+
+	val = (hb_en << 2) + (pd << 1);
+	val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1);
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	ui_x8 = ui << 3;
+
+	temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (95 * coeff - val_ckln * ui) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+	temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui;
+	tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
+	tmax = (tmin > 255) ? 511 : 255;
+	timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp + 3 * ui) / ui_x8;
+	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (85 * coeff + 6 * ui - val * ui) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+	temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui;
+	tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
+	tmax = 255;
+	timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8);
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp + 3 * ui) / ui_x8;
+	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+	timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
+
+	temp = 60 * coeff + 52 * ui - 43 * ui;
+	tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	timing->shared_timings.clk_post =
+				linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui;
+	temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui;
+	temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
+				(((timing->hs_rqst_ckln << 3) + 8) * ui);
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	if (tmin > tmax) {
+		temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre = temp >> 1;
+		timing->shared_timings.clk_pre_inc_by_2 = 1;
+	} else {
+		timing->shared_timings.clk_pre =
+				linear_inter(tmax, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre_inc_by_2 = 0;
+	}
+
+	timing->ta_go = 3;
+	timing->ta_sure = 0;
+	timing->ta_get = 4;
+
+	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+	    timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+	    timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+	    timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+	    timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+	    timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
+	    timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
+	    timing->hs_prep_dly_ckln);
+
+	return 0;
+}
+
+int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
+	struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, ui_x8;
+	s32 tmax, tmin;
+	s32 pcnt0 = 50;
+	s32 pcnt1 = 50;
+	s32 pcnt2 = 10;
+	s32 pcnt3 = 30;
+	s32 pcnt4 = 10;
+	s32 pcnt5 = 2;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 hb_en, hb_en_ckln;
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	timing->hs_halfbyte_en = 0;
+	hb_en = 0;
+	timing->hs_halfbyte_en_ckln = 0;
+	hb_en_ckln = 0;
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	ui_x8 = ui << 3;
+
+	temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (95 * coeff) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+	temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = (tmin > 255) ? 511 : 255;
+	timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp + 3 * ui) / ui_x8;
+	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (85 * coeff + 6 * ui) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+	temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp / ui_x8) - 1;
+	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+	timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
+
+	temp = 60 * coeff + 52 * ui - 43 * ui;
+	tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	timing->shared_timings.clk_post =
+		linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 8 * ui + (timing->clk_prepare << 3) * ui;
+	temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
+	temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
+		(((timing->hs_rqst_ckln << 3) + 8) * ui);
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	if (tmin > tmax) {
+		temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre = temp >> 1;
+		timing->shared_timings.clk_pre_inc_by_2 = 1;
+	} else {
+		timing->shared_timings.clk_pre =
+			linear_inter(tmax, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre_inc_by_2 = 0;
+	}
+
+	timing->ta_go = 3;
+	timing->ta_sure = 0;
+	timing->ta_get = 4;
+
+	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+		timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+		timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
+		timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
+		timing->hs_prep_dly_ckln);
+
+	return 0;
+}
+
+int msm_dsi_dphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing,
+	struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, ui_x8;
+	s32 tmax, tmin;
+	s32 pcnt_clk_prep = 50;
+	s32 pcnt_clk_zero = 2;
+	s32 pcnt_clk_trail = 30;
+	s32 pcnt_hs_prep = 50;
+	s32 pcnt_hs_zero = 10;
+	s32 pcnt_hs_trail = 30;
+	s32 pcnt_hs_exit = 10;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 hb_en;
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	hb_en = 0;
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	ui_x8 = ui << 3;
+
+	/* TODO: verify these calculations against latest downstream driver
+	 * everything except clk_post/clk_pre uses calculations from v3 based
+	 * on the downstream driver having the same calculations for v3 and v4
+	 */
+
+	temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (95 * coeff) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->clk_prepare = linear_inter(tmax, tmin, pcnt_clk_prep, 0, false);
+
+	temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = (tmin > 255) ? 511 : 255;
+	timing->clk_zero = linear_inter(tmax, tmin, pcnt_clk_zero, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp + 3 * ui) / ui_x8;
+	timing->clk_trail = linear_inter(tmax, tmin, pcnt_clk_trail, 0, false);
+
+	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (85 * coeff + 6 * ui) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->hs_prepare = linear_inter(tmax, tmin, pcnt_hs_prep, 0, false);
+
+	temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_zero = linear_inter(tmax, tmin, pcnt_hs_zero, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp / ui_x8) - 1;
+	timing->hs_trail = linear_inter(tmax, tmin, pcnt_hs_trail, 0, false);
+
+	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_exit = linear_inter(tmax, tmin, pcnt_hs_exit, 0, false);
+
+	/* recommended min
+	 * = roundup((mipi_min_ns + t_hs_trail_ns)/(16*bit_clk_ns), 0) - 1
+	 */
+	temp = 60 * coeff + 52 * ui + + (timing->hs_trail + 1) * ui_x8;
+	tmin = DIV_ROUND_UP(temp, 16 * ui) - 1;
+	tmax = 255;
+	timing->shared_timings.clk_post = linear_inter(tmax, tmin, 5, 0, false);
+
+	/* recommended min
+	 * val1 = (tlpx_ns + clk_prepare_ns + clk_zero_ns + hs_rqst_ns)
+	 * val2 = (16 * bit_clk_ns)
+	 * final = roundup(val1/val2, 0) - 1
+	 */
+	temp = 52 * coeff + (timing->clk_prepare + timing->clk_zero + 1) * ui_x8 + 54 * coeff;
+	tmin = DIV_ROUND_UP(temp, 16 * ui) - 1;
+	tmax = 255;
+	timing->shared_timings.clk_pre = DIV_ROUND_UP((tmax - tmin) * 125, 10000) + tmin;
+
+	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+		timing->clk_zero, timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+		timing->hs_zero, timing->hs_prepare, timing->hs_trail, timing->hs_rqst);
+
+	return 0;
+}
+
+int msm_dsi_cphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing,
+	struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, ui_x7;
+	s32 tmax, tmin;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	ui_x7 = ui * 7;
+
+	temp = S_DIV_ROUND_UP(38 * coeff, ui_x7);
+	tmin = max_t(s32, temp, 0);
+	temp = (95 * coeff) / ui_x7;
+	tmax = max_t(s32, temp, 0);
+	timing->clk_prepare = linear_inter(tmax, tmin, 50, 0, false);
+
+	tmin = DIV_ROUND_UP(50 * coeff, ui_x7);
+	tmax = 255;
+	timing->hs_rqst = linear_inter(tmax, tmin, 1, 0, false);
+
+	tmin = DIV_ROUND_UP(100 * coeff, ui_x7) - 1;
+	tmax = 255;
+	timing->hs_exit = linear_inter(tmax, tmin, 10, 0, false);
+
+	tmin = 1;
+	tmax = 32;
+	timing->shared_timings.clk_post = linear_inter(tmax, tmin, 80, 0, false);
+
+	tmin = min_t(s32, 64, S_DIV_ROUND_UP(262 * coeff, ui_x7) - 1);
+	tmax = 64;
+	timing->shared_timings.clk_pre = linear_inter(tmax, tmin, 20, 0, false);
+
+	DBG("%d, %d, %d, %d, %d",
+		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+		timing->clk_prepare, timing->hs_exit, timing->hs_rqst);
+
+	return 0;
+}
+
+static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
+{
+	struct device *dev = &phy->pdev->dev;
+	int ret;
+
+	pm_runtime_get_sync(dev);
+
+	ret = clk_prepare_enable(phy->ahb_clk);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
+		pm_runtime_put_sync(dev);
+	}
+
+	return ret;
+}
+
+static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
+{
+	clk_disable_unprepare(phy->ahb_clk);
+	pm_runtime_put(&phy->pdev->dev);
+}
+
+static const struct of_device_id dsi_phy_dt_match[] = {
+#ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
+	{ .compatible = "qcom,dsi-phy-28nm-hpm",
+	  .data = &dsi_phy_28nm_hpm_cfgs },
+	{ .compatible = "qcom,dsi-phy-28nm-hpm-fam-b",
+	  .data = &dsi_phy_28nm_hpm_famb_cfgs },
+	{ .compatible = "qcom,dsi-phy-28nm-lp",
+	  .data = &dsi_phy_28nm_lp_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
+	{ .compatible = "qcom,dsi-phy-20nm",
+	  .data = &dsi_phy_20nm_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
+	{ .compatible = "qcom,dsi-phy-28nm-8960",
+	  .data = &dsi_phy_28nm_8960_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
+	{ .compatible = "qcom,dsi-phy-14nm",
+	  .data = &dsi_phy_14nm_cfgs },
+	{ .compatible = "qcom,dsi-phy-14nm-2290",
+	  .data = &dsi_phy_14nm_2290_cfgs },
+	{ .compatible = "qcom,dsi-phy-14nm-660",
+	  .data = &dsi_phy_14nm_660_cfgs },
+	{ .compatible = "qcom,dsi-phy-14nm-8953",
+	  .data = &dsi_phy_14nm_8953_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
+	{ .compatible = "qcom,dsi-phy-10nm",
+	  .data = &dsi_phy_10nm_cfgs },
+	{ .compatible = "qcom,dsi-phy-10nm-8998",
+	  .data = &dsi_phy_10nm_8998_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_7NM_PHY
+	{ .compatible = "qcom,dsi-phy-7nm",
+	  .data = &dsi_phy_7nm_cfgs },
+	{ .compatible = "qcom,dsi-phy-7nm-8150",
+	  .data = &dsi_phy_7nm_8150_cfgs },
+	{ .compatible = "qcom,sc7280-dsi-phy-7nm",
+	  .data = &dsi_phy_7nm_7280_cfgs },
+#endif
+	{}
+};
+
+/*
+ * Currently, we only support one SoC for each PHY type. When we have multiple
+ * SoCs for the same PHY, we can try to make the index searching a bit more
+ * clever.
+ */
+static int dsi_phy_get_id(struct msm_dsi_phy *phy)
+{
+	struct platform_device *pdev = phy->pdev;
+	const struct msm_dsi_phy_cfg *cfg = phy->cfg;
+	struct resource *res;
+	int i;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy");
+	if (!res)
+		return -EINVAL;
+
+	for (i = 0; i < cfg->num_dsi_phy; i++) {
+		if (cfg->io_start[i] == res->start)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int dsi_phy_driver_probe(struct platform_device *pdev)
+{
+	struct msm_dsi_phy *phy;
+	struct device *dev = &pdev->dev;
+	u32 phy_type;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->provided_clocks = devm_kzalloc(dev,
+			struct_size(phy->provided_clocks, hws, NUM_PROVIDED_CLKS),
+			GFP_KERNEL);
+	if (!phy->provided_clocks)
+		return -ENOMEM;
+
+	phy->provided_clocks->num = NUM_PROVIDED_CLKS;
+
+	phy->cfg = of_device_get_match_data(&pdev->dev);
+	if (!phy->cfg)
+		return -ENODEV;
+
+	phy->pdev = pdev;
+
+	phy->id = dsi_phy_get_id(phy);
+	if (phy->id < 0)
+		return dev_err_probe(dev, phy->id,
+				     "Couldn't identify PHY index\n");
+
+	phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
+				"qcom,dsi-phy-regulator-ldo-mode");
+	if (!of_property_read_u32(dev->of_node, "phy-type", &phy_type))
+		phy->cphy_mode = (phy_type == PHY_TYPE_CPHY);
+
+	phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size);
+	if (IS_ERR(phy->base))
+		return dev_err_probe(dev, PTR_ERR(phy->base),
+				     "Failed to map phy base\n");
+
+	phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", &phy->pll_size);
+	if (IS_ERR(phy->pll_base))
+		return dev_err_probe(dev, PTR_ERR(phy->pll_base),
+				     "Failed to map pll base\n");
+
+	if (phy->cfg->has_phy_lane) {
+		phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", &phy->lane_size);
+		if (IS_ERR(phy->lane_base))
+			return dev_err_probe(dev, PTR_ERR(phy->lane_base),
+					     "Failed to map phy lane base\n");
+	}
+
+	if (phy->cfg->has_phy_regulator) {
+		phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", &phy->reg_size);
+		if (IS_ERR(phy->reg_base))
+			return dev_err_probe(dev, PTR_ERR(phy->reg_base),
+					     "Failed to map phy regulator base\n");
+	}
+
+	if (phy->cfg->ops.parse_dt_properties) {
+		ret = phy->cfg->ops.parse_dt_properties(phy);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_regulator_bulk_get_const(dev, phy->cfg->num_regulators,
+					    phy->cfg->regulator_data,
+					    &phy->supplies);
+	if (ret)
+		return ret;
+
+	phy->ahb_clk = msm_clk_get(pdev, "iface");
+	if (IS_ERR(phy->ahb_clk))
+		return dev_err_probe(dev, PTR_ERR(phy->ahb_clk),
+				     "Unable to get ahb clk\n");
+
+	/* PLL init will call into clk_register which requires
+	 * register access, so we need to enable power and ahb clock.
+	 */
+	ret = dsi_phy_enable_resource(phy);
+	if (ret)
+		return ret;
+
+	if (phy->cfg->ops.pll_init) {
+		ret = phy->cfg->ops.pll_init(phy);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "PLL init failed; need separate clk driver\n");
+	}
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+				     phy->provided_clocks);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to register clk provider\n");
+
+	dsi_phy_disable_resource(phy);
+
+	platform_set_drvdata(pdev, phy);
+
+	return 0;
+}
+
+static struct platform_driver dsi_phy_platform_driver = {
+	.probe      = dsi_phy_driver_probe,
+	.driver     = {
+		.name   = "msm_dsi_phy",
+		.of_match_table = dsi_phy_dt_match,
+	},
+};
+
+void __init msm_dsi_phy_driver_register(void)
+{
+	platform_driver_register(&dsi_phy_platform_driver);
+}
+
+void __exit msm_dsi_phy_driver_unregister(void)
+{
+	platform_driver_unregister(&dsi_phy_platform_driver);
+}
+
+int msm_dsi_phy_enable(struct msm_dsi_phy *phy,
+			struct msm_dsi_phy_clk_request *clk_req,
+			struct msm_dsi_phy_shared_timings *shared_timings)
+{
+	struct device *dev;
+	int ret;
+
+	if (!phy || !phy->cfg->ops.enable)
+		return -EINVAL;
+
+	dev = &phy->pdev->dev;
+
+	ret = dsi_phy_enable_resource(phy);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "%s: resource enable failed, %d\n",
+			__func__, ret);
+		goto res_en_fail;
+	}
+
+	ret = regulator_bulk_enable(phy->cfg->num_regulators, phy->supplies);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "%s: regulator enable failed, %d\n",
+			__func__, ret);
+		goto reg_en_fail;
+	}
+
+	ret = phy->cfg->ops.enable(phy, clk_req);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret);
+		goto phy_en_fail;
+	}
+
+	memcpy(shared_timings, &phy->timing.shared_timings,
+	       sizeof(*shared_timings));
+
+	/*
+	 * Resetting DSI PHY silently changes its PLL registers to reset status,
+	 * which will confuse clock driver and result in wrong output rate of
+	 * link clocks. Restore PLL status if its PLL is being used as clock
+	 * source.
+	 */
+	if (phy->usecase != MSM_DSI_PHY_SLAVE) {
+		ret = msm_dsi_phy_pll_restore_state(phy);
+		if (ret) {
+			DRM_DEV_ERROR(dev, "%s: failed to restore phy state, %d\n",
+				__func__, ret);
+			goto pll_restor_fail;
+		}
+	}
+
+	return 0;
+
+pll_restor_fail:
+	if (phy->cfg->ops.disable)
+		phy->cfg->ops.disable(phy);
+phy_en_fail:
+	regulator_bulk_disable(phy->cfg->num_regulators, phy->supplies);
+reg_en_fail:
+	dsi_phy_disable_resource(phy);
+res_en_fail:
+	return ret;
+}
+
+void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
+{
+	if (!phy || !phy->cfg->ops.disable)
+		return;
+
+	phy->cfg->ops.disable(phy);
+
+	regulator_bulk_disable(phy->cfg->num_regulators, phy->supplies);
+	dsi_phy_disable_resource(phy);
+}
+
+void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy,
+			     enum msm_dsi_phy_usecase uc)
+{
+	if (phy)
+		phy->usecase = uc;
+}
+
+/* Returns true if we have to clear DSI_LANE_CTRL.HS_REQ_SEL_PHY */
+bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable)
+{
+	if (!phy || !phy->cfg->ops.set_continuous_clock)
+		return false;
+
+	return phy->cfg->ops.set_continuous_clock(phy, enable);
+}
+
+void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy)
+{
+	if (phy->cfg->ops.save_pll_state) {
+		phy->cfg->ops.save_pll_state(phy);
+		phy->state_saved = true;
+	}
+}
+
+int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy)
+{
+	int ret;
+
+	if (phy->cfg->ops.restore_pll_state && phy->state_saved) {
+		ret = phy->cfg->ops.restore_pll_state(phy);
+		if (ret)
+			return ret;
+
+		phy->state_saved = false;
+	}
+
+	return 0;
+}
+
+void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy)
+{
+	msm_disp_snapshot_add_block(disp_state,
+			phy->base_size, phy->base,
+			"dsi%d_phy", phy->id);
+
+	/* Do not try accessing PLL registers if it is switched off */
+	if (phy->pll_on)
+		msm_disp_snapshot_add_block(disp_state,
+			phy->pll_size, phy->pll_base,
+			"dsi%d_pll", phy->id);
+
+	if (phy->lane_base)
+		msm_disp_snapshot_add_block(disp_state,
+			phy->lane_size, phy->lane_base,
+			"dsi%d_lane", phy->id);
+
+	if (phy->reg_base)
+		msm_disp_snapshot_add_block(disp_state,
+			phy->reg_size, phy->reg_base,
+			"dsi%d_reg", phy->id);
+}