Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 723 insertions, 0 deletions

diff --git a/drivers/gpu/drm/nouveau/dispnv04/dfp.c b/drivers/gpu/drm/nouveau/dispnv04/dfp.c
new file mode 100644
index 000000000..ce3d8c6ef
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/dispnv04/dfp.c
@@ -0,0 +1,723 @@
+/*
+ * Copyright 2003 NVIDIA, Corporation
+ * Copyright 2006 Dave Airlie
+ * Copyright 2007 Maarten Maathuis
+ * Copyright 2007-2009 Stuart Bennett
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fourcc.h>
+
+#include "nouveau_drv.h"
+#include "nouveau_reg.h"
+#include "nouveau_encoder.h"
+#include "nouveau_connector.h"
+#include "nouveau_crtc.h"
+#include "hw.h"
+#include "nvreg.h"
+
+#include <drm/i2c/sil164.h>
+
+#include <subdev/i2c.h>
+
+#define FP_TG_CONTROL_ON  (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |	\
+			   NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS |		\
+			   NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS)
+#define FP_TG_CONTROL_OFF (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_DISABLE |	\
+			   NV_PRAMDAC_FP_TG_CONTROL_HSYNC_DISABLE |	\
+			   NV_PRAMDAC_FP_TG_CONTROL_VSYNC_DISABLE)
+
+static inline bool is_fpc_off(uint32_t fpc)
+{
+	return ((fpc & (FP_TG_CONTROL_ON | FP_TG_CONTROL_OFF)) ==
+			FP_TG_CONTROL_OFF);
+}
+
+int nv04_dfp_get_bound_head(struct drm_device *dev, struct dcb_output *dcbent)
+{
+	/* special case of nv_read_tmds to find crtc associated with an output.
+	 * this does not give a correct answer for off-chip dvi, but there's no
+	 * use for such an answer anyway
+	 */
+	int ramdac = (dcbent->or & DCB_OUTPUT_C) >> 2;
+
+	NVWriteRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_CONTROL,
+	NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE | 0x4);
+	return ((NVReadRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_DATA) & 0x8) >> 3) ^ ramdac;
+}
+
+void nv04_dfp_bind_head(struct drm_device *dev, struct dcb_output *dcbent,
+			int head, bool dl)
+{
+	/* The BIOS scripts don't do this for us, sadly
+	 * Luckily we do know the values ;-)
+	 *
+	 * head < 0 indicates we wish to force a setting with the overrideval
+	 * (for VT restore etc.)
+	 */
+
+	int ramdac = (dcbent->or & DCB_OUTPUT_C) >> 2;
+	uint8_t tmds04 = 0x80;
+
+	if (head != ramdac)
+		tmds04 = 0x88;
+
+	if (dcbent->type == DCB_OUTPUT_LVDS)
+		tmds04 |= 0x01;
+
+	nv_write_tmds(dev, dcbent->or, 0, 0x04, tmds04);
+
+	if (dl)	/* dual link */
+		nv_write_tmds(dev, dcbent->or, 1, 0x04, tmds04 ^ 0x08);
+}
+
+void nv04_dfp_disable(struct drm_device *dev, int head)
+{
+	struct nv04_crtc_reg *crtcstate = nv04_display(dev)->mode_reg.crtc_reg;
+
+	if (NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL) &
+	    FP_TG_CONTROL_ON) {
+		/* digital remnants must be cleaned before new crtc
+		 * values programmed.  delay is time for the vga stuff
+		 * to realise it's in control again
+		 */
+		NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL,
+			      FP_TG_CONTROL_OFF);
+		msleep(50);
+	}
+	/* don't inadvertently turn it on when state written later */
+	crtcstate[head].fp_control = FP_TG_CONTROL_OFF;
+	crtcstate[head].CRTC[NV_CIO_CRE_LCD__INDEX] &=
+		~NV_CIO_CRE_LCD_ROUTE_MASK;
+}
+
+void nv04_dfp_update_fp_control(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc;
+	struct nouveau_crtc *nv_crtc;
+	uint32_t *fpc;
+
+	if (mode == DRM_MODE_DPMS_ON) {
+		nv_crtc = nouveau_crtc(encoder->crtc);
+		fpc = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index].fp_control;
+
+		if (is_fpc_off(*fpc)) {
+			/* using saved value is ok, as (is_digital && dpms_on &&
+			 * fp_control==OFF) is (at present) *only* true when
+			 * fpc's most recent change was by below "off" code
+			 */
+			*fpc = nv_crtc->dpms_saved_fp_control;
+		}
+
+		nv_crtc->fp_users |= 1 << nouveau_encoder(encoder)->dcb->index;
+		NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_FP_TG_CONTROL, *fpc);
+	} else {
+		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+			nv_crtc = nouveau_crtc(crtc);
+			fpc = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index].fp_control;
+
+			nv_crtc->fp_users &= ~(1 << nouveau_encoder(encoder)->dcb->index);
+			if (!is_fpc_off(*fpc) && !nv_crtc->fp_users) {
+				nv_crtc->dpms_saved_fp_control = *fpc;
+				/* cut the FP output */
+				*fpc &= ~FP_TG_CONTROL_ON;
+				*fpc |= FP_TG_CONTROL_OFF;
+				NVWriteRAMDAC(dev, nv_crtc->index,
+					      NV_PRAMDAC_FP_TG_CONTROL, *fpc);
+			}
+		}
+	}
+}
+
+static struct drm_encoder *get_tmds_slave(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct dcb_output *dcb = nouveau_encoder(encoder)->dcb;
+	struct drm_encoder *slave;
+
+	if (dcb->type != DCB_OUTPUT_TMDS || dcb->location == DCB_LOC_ON_CHIP)
+		return NULL;
+
+	/* Some BIOSes (e.g. the one in a Quadro FX1000) report several
+	 * TMDS transmitters at the same I2C address, in the same I2C
+	 * bus. This can still work because in that case one of them is
+	 * always hard-wired to a reasonable configuration using straps,
+	 * and the other one needs to be programmed.
+	 *
+	 * I don't think there's a way to know which is which, even the
+	 * blob programs the one exposed via I2C for *both* heads, so
+	 * let's do the same.
+	 */
+	list_for_each_entry(slave, &dev->mode_config.encoder_list, head) {
+		struct dcb_output *slave_dcb = nouveau_encoder(slave)->dcb;
+
+		if (slave_dcb->type == DCB_OUTPUT_TMDS && get_slave_funcs(slave) &&
+		    slave_dcb->tmdsconf.slave_addr == dcb->tmdsconf.slave_addr)
+			return slave;
+	}
+
+	return NULL;
+}
+
+static bool nv04_dfp_mode_fixup(struct drm_encoder *encoder,
+				const struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct nouveau_connector *nv_connector =
+		nv04_encoder_get_connector(nv_encoder);
+
+	if (!nv_connector->native_mode ||
+	    nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
+	    mode->hdisplay > nv_connector->native_mode->hdisplay ||
+	    mode->vdisplay > nv_connector->native_mode->vdisplay) {
+		nv_encoder->mode = *adjusted_mode;
+
+	} else {
+		nv_encoder->mode = *nv_connector->native_mode;
+		adjusted_mode->clock = nv_connector->native_mode->clock;
+	}
+
+	return true;
+}
+
+static void nv04_dfp_prepare_sel_clk(struct drm_device *dev,
+				     struct nouveau_encoder *nv_encoder, int head)
+{
+	struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
+	uint32_t bits1618 = nv_encoder->dcb->or & DCB_OUTPUT_A ? 0x10000 : 0x40000;
+
+	if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP)
+		return;
+
+	/* SEL_CLK is only used on the primary ramdac
+	 * It toggles spread spectrum PLL output and sets the bindings of PLLs
+	 * to heads on digital outputs
+	 */
+	if (head)
+		state->sel_clk |= bits1618;
+	else
+		state->sel_clk &= ~bits1618;
+
+	/* nv30:
+	 *	bit 0		NVClk spread spectrum on/off
+	 *	bit 2		MemClk spread spectrum on/off
+	 * 	bit 4		PixClk1 spread spectrum on/off toggle
+	 * 	bit 6		PixClk2 spread spectrum on/off toggle
+	 *
+	 * nv40 (observations from bios behaviour and mmio traces):
+	 * 	bits 4&6	as for nv30
+	 * 	bits 5&7	head dependent as for bits 4&6, but do not appear with 4&6;
+	 * 			maybe a different spread mode
+	 * 	bits 8&10	seen on dual-link dvi outputs, purpose unknown (set by POST scripts)
+	 * 	The logic behind turning spread spectrum on/off in the first place,
+	 * 	and which bit-pair to use, is unclear on nv40 (for earlier cards, the fp table
+	 * 	entry has the necessary info)
+	 */
+	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS && nv04_display(dev)->saved_reg.sel_clk & 0xf0) {
+		int shift = (nv04_display(dev)->saved_reg.sel_clk & 0x50) ? 0 : 1;
+
+		state->sel_clk &= ~0xf0;
+		state->sel_clk |= (head ? 0x40 : 0x10) << shift;
+	}
+}
+
+static void nv04_dfp_prepare(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	const struct drm_encoder_helper_funcs *helper = encoder->helper_private;
+	struct drm_device *dev = encoder->dev;
+	int head = nouveau_crtc(encoder->crtc)->index;
+	struct nv04_crtc_reg *crtcstate = nv04_display(dev)->mode_reg.crtc_reg;
+	uint8_t *cr_lcd = &crtcstate[head].CRTC[NV_CIO_CRE_LCD__INDEX];
+	uint8_t *cr_lcd_oth = &crtcstate[head ^ 1].CRTC[NV_CIO_CRE_LCD__INDEX];
+
+	helper->dpms(encoder, DRM_MODE_DPMS_OFF);
+
+	nv04_dfp_prepare_sel_clk(dev, nv_encoder, head);
+
+	*cr_lcd = (*cr_lcd & ~NV_CIO_CRE_LCD_ROUTE_MASK) | 0x3;
+
+	if (nv_two_heads(dev)) {
+		if (nv_encoder->dcb->location == DCB_LOC_ON_CHIP)
+			*cr_lcd |= head ? 0x0 : 0x8;
+		else {
+			*cr_lcd |= (nv_encoder->dcb->or << 4) & 0x30;
+			if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS)
+				*cr_lcd |= 0x30;
+			if ((*cr_lcd & 0x30) == (*cr_lcd_oth & 0x30)) {
+				/* avoid being connected to both crtcs */
+				*cr_lcd_oth &= ~0x30;
+				NVWriteVgaCrtc(dev, head ^ 1,
+					       NV_CIO_CRE_LCD__INDEX,
+					       *cr_lcd_oth);
+			}
+		}
+	}
+}
+
+
+static void nv04_dfp_mode_set(struct drm_encoder *encoder,
+			      struct drm_display_mode *mode,
+			      struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct nvif_object *device = &nouveau_drm(dev)->client.device.object;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
+	struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
+	struct nv04_crtc_reg *savep = &nv04_display(dev)->saved_reg.crtc_reg[nv_crtc->index];
+	struct nouveau_connector *nv_connector = nouveau_crtc_connector_get(nv_crtc);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_display_mode *output_mode = &nv_encoder->mode;
+	struct drm_connector *connector = &nv_connector->base;
+	const struct drm_framebuffer *fb = encoder->crtc->primary->fb;
+	uint32_t mode_ratio, panel_ratio;
+
+	NV_DEBUG(drm, "Output mode on CRTC %d:\n", nv_crtc->index);
+	drm_mode_debug_printmodeline(output_mode);
+
+	/* Initialize the FP registers in this CRTC. */
+	regp->fp_horiz_regs[FP_DISPLAY_END] = output_mode->hdisplay - 1;
+	regp->fp_horiz_regs[FP_TOTAL] = output_mode->htotal - 1;
+	if (!nv_gf4_disp_arch(dev) ||
+	    (output_mode->hsync_start - output_mode->hdisplay) >=
+					drm->vbios.digital_min_front_porch)
+		regp->fp_horiz_regs[FP_CRTC] = output_mode->hdisplay;
+	else
+		regp->fp_horiz_regs[FP_CRTC] = output_mode->hsync_start - drm->vbios.digital_min_front_porch - 1;
+	regp->fp_horiz_regs[FP_SYNC_START] = output_mode->hsync_start - 1;
+	regp->fp_horiz_regs[FP_SYNC_END] = output_mode->hsync_end - 1;
+	regp->fp_horiz_regs[FP_VALID_START] = output_mode->hskew;
+	regp->fp_horiz_regs[FP_VALID_END] = output_mode->hdisplay - 1;
+
+	regp->fp_vert_regs[FP_DISPLAY_END] = output_mode->vdisplay - 1;
+	regp->fp_vert_regs[FP_TOTAL] = output_mode->vtotal - 1;
+	regp->fp_vert_regs[FP_CRTC] = output_mode->vtotal - 5 - 1;
+	regp->fp_vert_regs[FP_SYNC_START] = output_mode->vsync_start - 1;
+	regp->fp_vert_regs[FP_SYNC_END] = output_mode->vsync_end - 1;
+	regp->fp_vert_regs[FP_VALID_START] = 0;
+	regp->fp_vert_regs[FP_VALID_END] = output_mode->vdisplay - 1;
+
+	/* bit26: a bit seen on some g7x, no as yet discernable purpose */
+	regp->fp_control = NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |
+			   (savep->fp_control & (1 << 26 | NV_PRAMDAC_FP_TG_CONTROL_READ_PROG));
+	/* Deal with vsync/hsync polarity */
+	/* LVDS screens do set this, but modes with +ve syncs are very rare */
+	if (output_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS;
+	if (output_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS;
+	/* panel scaling first, as native would get set otherwise */
+	if (nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
+	    nv_connector->scaling_mode == DRM_MODE_SCALE_CENTER)	/* panel handles it */
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_CENTER;
+	else if (adjusted_mode->hdisplay == output_mode->hdisplay &&
+		 adjusted_mode->vdisplay == output_mode->vdisplay) /* native mode */
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_NATIVE;
+	else /* gpu needs to scale */
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_SCALE;
+	if (nvif_rd32(device, NV_PEXTDEV_BOOT_0) & NV_PEXTDEV_BOOT_0_STRAP_FP_IFACE_12BIT)
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12;
+	if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP &&
+	    output_mode->clock > 165000)
+		regp->fp_control |= (2 << 24);
+	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS) {
+		bool duallink = false, dummy;
+		if (nv_connector->edid &&
+		    nv_connector->type == DCB_CONNECTOR_LVDS_SPWG) {
+			duallink = (((u8 *)nv_connector->edid)[121] == 2);
+		} else {
+			nouveau_bios_parse_lvds_table(dev, output_mode->clock,
+						      &duallink, &dummy);
+		}
+
+		if (duallink)
+			regp->fp_control |= (8 << 28);
+	} else
+	if (output_mode->clock > 165000)
+		regp->fp_control |= (8 << 28);
+
+	regp->fp_debug_0 = NV_PRAMDAC_FP_DEBUG_0_YWEIGHT_ROUND |
+			   NV_PRAMDAC_FP_DEBUG_0_XWEIGHT_ROUND |
+			   NV_PRAMDAC_FP_DEBUG_0_YINTERP_BILINEAR |
+			   NV_PRAMDAC_FP_DEBUG_0_XINTERP_BILINEAR |
+			   NV_RAMDAC_FP_DEBUG_0_TMDS_ENABLED |
+			   NV_PRAMDAC_FP_DEBUG_0_YSCALE_ENABLE |
+			   NV_PRAMDAC_FP_DEBUG_0_XSCALE_ENABLE;
+
+	/* We want automatic scaling */
+	regp->fp_debug_1 = 0;
+	/* This can override HTOTAL and VTOTAL */
+	regp->fp_debug_2 = 0;
+
+	/* Use 20.12 fixed point format to avoid floats */
+	mode_ratio = (1 << 12) * adjusted_mode->hdisplay / adjusted_mode->vdisplay;
+	panel_ratio = (1 << 12) * output_mode->hdisplay / output_mode->vdisplay;
+	/* if ratios are equal, SCALE_ASPECT will automatically (and correctly)
+	 * get treated the same as SCALE_FULLSCREEN */
+	if (nv_connector->scaling_mode == DRM_MODE_SCALE_ASPECT &&
+	    mode_ratio != panel_ratio) {
+		uint32_t diff, scale;
+		bool divide_by_2 = nv_gf4_disp_arch(dev);
+
+		if (mode_ratio < panel_ratio) {
+			/* vertical needs to expand to glass size (automatic)
+			 * horizontal needs to be scaled at vertical scale factor
+			 * to maintain aspect */
+
+			scale = (1 << 12) * adjusted_mode->vdisplay / output_mode->vdisplay;
+			regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_XSCALE_TESTMODE_ENABLE |
+					   XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_XSCALE_VALUE);
+
+			/* restrict area of screen used, horizontally */
+			diff = output_mode->hdisplay -
+			       output_mode->vdisplay * mode_ratio / (1 << 12);
+			regp->fp_horiz_regs[FP_VALID_START] += diff / 2;
+			regp->fp_horiz_regs[FP_VALID_END] -= diff / 2;
+		}
+
+		if (mode_ratio > panel_ratio) {
+			/* horizontal needs to expand to glass size (automatic)
+			 * vertical needs to be scaled at horizontal scale factor
+			 * to maintain aspect */
+
+			scale = (1 << 12) * adjusted_mode->hdisplay / output_mode->hdisplay;
+			regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_YSCALE_TESTMODE_ENABLE |
+					   XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_YSCALE_VALUE);
+
+			/* restrict area of screen used, vertically */
+			diff = output_mode->vdisplay -
+			       (1 << 12) * output_mode->hdisplay / mode_ratio;
+			regp->fp_vert_regs[FP_VALID_START] += diff / 2;
+			regp->fp_vert_regs[FP_VALID_END] -= diff / 2;
+		}
+	}
+
+	/* Output property. */
+	if ((nv_connector->dithering_mode == DITHERING_MODE_ON) ||
+	    (nv_connector->dithering_mode == DITHERING_MODE_AUTO &&
+	     fb->format->depth > connector->display_info.bpc * 3)) {
+		if (drm->client.device.info.chipset == 0x11)
+			regp->dither = savep->dither | 0x00010000;
+		else {
+			int i;
+			regp->dither = savep->dither | 0x00000001;
+			for (i = 0; i < 3; i++) {
+				regp->dither_regs[i] = 0xe4e4e4e4;
+				regp->dither_regs[i + 3] = 0x44444444;
+			}
+		}
+	} else {
+		if (drm->client.device.info.chipset != 0x11) {
+			/* reset them */
+			int i;
+			for (i = 0; i < 3; i++) {
+				regp->dither_regs[i] = savep->dither_regs[i];
+				regp->dither_regs[i + 3] = savep->dither_regs[i + 3];
+			}
+		}
+		regp->dither = savep->dither;
+	}
+
+	regp->fp_margin_color = 0;
+}
+
+static void nv04_dfp_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	const struct drm_encoder_helper_funcs *helper = encoder->helper_private;
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct dcb_output *dcbe = nv_encoder->dcb;
+	int head = nouveau_crtc(encoder->crtc)->index;
+	struct drm_encoder *slave_encoder;
+
+	if (dcbe->type == DCB_OUTPUT_TMDS)
+		run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock);
+	else if (dcbe->type == DCB_OUTPUT_LVDS)
+		call_lvds_script(dev, dcbe, head, LVDS_RESET, nv_encoder->mode.clock);
+
+	/* update fp_control state for any changes made by scripts,
+	 * so correct value is written at DPMS on */
+	nv04_display(dev)->mode_reg.crtc_reg[head].fp_control =
+		NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL);
+
+	/* This could use refinement for flatpanels, but it should work this way */
+	if (drm->client.device.info.chipset < 0x44)
+		NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0xf0000000);
+	else
+		NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0x00100000);
+
+	/* Init external transmitters */
+	slave_encoder = get_tmds_slave(encoder);
+	if (slave_encoder)
+		get_slave_funcs(slave_encoder)->mode_set(
+			slave_encoder, &nv_encoder->mode, &nv_encoder->mode);
+
+	helper->dpms(encoder, DRM_MODE_DPMS_ON);
+
+	NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+		 nv04_encoder_get_connector(nv_encoder)->base.name,
+		 nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
+}
+
+static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode)
+{
+#ifdef __powerpc__
+	struct drm_device *dev = encoder->dev;
+	struct nvif_object *device = &nouveau_drm(dev)->client.device.object;
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+	/* BIOS scripts usually take care of the backlight, thanks
+	 * Apple for your consistency.
+	 */
+	if (pdev->device == 0x0174 || pdev->device == 0x0179 ||
+	    pdev->device == 0x0189 || pdev->device == 0x0329) {
+		if (mode == DRM_MODE_DPMS_ON) {
+			nvif_mask(device, NV_PBUS_DEBUG_DUALHEAD_CTL, 1 << 31, 1 << 31);
+			nvif_mask(device, NV_PCRTC_GPIO_EXT, 3, 1);
+		} else {
+			nvif_mask(device, NV_PBUS_DEBUG_DUALHEAD_CTL, 1 << 31, 0);
+			nvif_mask(device, NV_PCRTC_GPIO_EXT, 3, 0);
+		}
+	}
+#endif
+}
+
+static inline bool is_powersaving_dpms(int mode)
+{
+	return mode != DRM_MODE_DPMS_ON && mode != NV_DPMS_CLEARED;
+}
+
+static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	bool was_powersaving = is_powersaving_dpms(nv_encoder->last_dpms);
+
+	if (nv_encoder->last_dpms == mode)
+		return;
+	nv_encoder->last_dpms = mode;
+
+	NV_DEBUG(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
+		 mode, nv_encoder->dcb->index);
+
+	if (was_powersaving && is_powersaving_dpms(mode))
+		return;
+
+	if (nv_encoder->dcb->lvdsconf.use_power_scripts) {
+		/* when removing an output, crtc may not be set, but PANEL_OFF
+		 * must still be run
+		 */
+		int head = crtc ? nouveau_crtc(crtc)->index :
+			   nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
+
+		if (mode == DRM_MODE_DPMS_ON) {
+			call_lvds_script(dev, nv_encoder->dcb, head,
+					 LVDS_PANEL_ON, nv_encoder->mode.clock);
+		} else
+			/* pxclk of 0 is fine for PANEL_OFF, and for a
+			 * disconnected LVDS encoder there is no native_mode
+			 */
+			call_lvds_script(dev, nv_encoder->dcb, head,
+					 LVDS_PANEL_OFF, 0);
+	}
+
+	nv04_dfp_update_backlight(encoder, mode);
+	nv04_dfp_update_fp_control(encoder, mode);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		nv04_dfp_prepare_sel_clk(dev, nv_encoder, nouveau_crtc(crtc)->index);
+	else {
+		nv04_display(dev)->mode_reg.sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK);
+		nv04_display(dev)->mode_reg.sel_clk &= ~0xf0;
+	}
+	NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, nv04_display(dev)->mode_reg.sel_clk);
+}
+
+static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct nouveau_drm *drm = nouveau_drm(encoder->dev);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+	if (nv_encoder->last_dpms == mode)
+		return;
+	nv_encoder->last_dpms = mode;
+
+	NV_DEBUG(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
+		 mode, nv_encoder->dcb->index);
+
+	nv04_dfp_update_backlight(encoder, mode);
+	nv04_dfp_update_fp_control(encoder, mode);
+}
+
+static void nv04_dfp_save(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+
+	if (nv_two_heads(dev))
+		nv_encoder->restore.head =
+			nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
+}
+
+static void nv04_dfp_restore(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+	int head = nv_encoder->restore.head;
+
+	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS) {
+		struct nouveau_connector *connector =
+			nv04_encoder_get_connector(nv_encoder);
+
+		if (connector && connector->native_mode)
+			call_lvds_script(dev, nv_encoder->dcb, head,
+					 LVDS_PANEL_ON,
+					 connector->native_mode->clock);
+
+	} else if (nv_encoder->dcb->type == DCB_OUTPUT_TMDS) {
+		int clock = nouveau_hw_pllvals_to_clk
+					(&nv04_display(dev)->saved_reg.crtc_reg[head].pllvals);
+
+		run_tmds_table(dev, nv_encoder->dcb, head, clock);
+	}
+
+	nv_encoder->last_dpms = NV_DPMS_CLEARED;
+}
+
+static void nv04_dfp_destroy(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+	if (get_slave_funcs(encoder))
+		get_slave_funcs(encoder)->destroy(encoder);
+
+	drm_encoder_cleanup(encoder);
+	kfree(nv_encoder);
+}
+
+static void nv04_tmds_slave_init(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct dcb_output *dcb = nouveau_encoder(encoder)->dcb;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nvkm_i2c *i2c = nvxx_i2c(&drm->client.device);
+	struct nvkm_i2c_bus *bus = nvkm_i2c_bus_find(i2c, NVKM_I2C_BUS_PRI);
+	struct nvkm_i2c_bus_probe info[] = {
+		{
+		    {
+		        .type = "sil164",
+		        .addr = (dcb->tmdsconf.slave_addr == 0x7 ? 0x3a : 0x38),
+		        .platform_data = &(struct sil164_encoder_params) {
+		            SIL164_INPUT_EDGE_RISING
+		         }
+		    }, 0
+		},
+		{ }
+	};
+	int type;
+
+	if (!nv_gf4_disp_arch(dev) || !bus || get_tmds_slave(encoder))
+		return;
+
+	type = nvkm_i2c_bus_probe(bus, "TMDS transmitter", info, NULL, NULL);
+	if (type < 0)
+		return;
+
+	drm_i2c_encoder_init(dev, to_encoder_slave(encoder),
+			     &bus->i2c, &info[type].dev);
+}
+
+static const struct drm_encoder_helper_funcs nv04_lvds_helper_funcs = {
+	.dpms = nv04_lvds_dpms,
+	.mode_fixup = nv04_dfp_mode_fixup,
+	.prepare = nv04_dfp_prepare,
+	.commit = nv04_dfp_commit,
+	.mode_set = nv04_dfp_mode_set,
+	.detect = NULL,
+};
+
+static const struct drm_encoder_helper_funcs nv04_tmds_helper_funcs = {
+	.dpms = nv04_tmds_dpms,
+	.mode_fixup = nv04_dfp_mode_fixup,
+	.prepare = nv04_dfp_prepare,
+	.commit = nv04_dfp_commit,
+	.mode_set = nv04_dfp_mode_set,
+	.detect = NULL,
+};
+
+static const struct drm_encoder_funcs nv04_dfp_funcs = {
+	.destroy = nv04_dfp_destroy,
+};
+
+int
+nv04_dfp_create(struct drm_connector *connector, struct dcb_output *entry)
+{
+	const struct drm_encoder_helper_funcs *helper;
+	struct nouveau_encoder *nv_encoder = NULL;
+	struct drm_encoder *encoder;
+	int type;
+
+	switch (entry->type) {
+	case DCB_OUTPUT_TMDS:
+		type = DRM_MODE_ENCODER_TMDS;
+		helper = &nv04_tmds_helper_funcs;
+		break;
+	case DCB_OUTPUT_LVDS:
+		type = DRM_MODE_ENCODER_LVDS;
+		helper = &nv04_lvds_helper_funcs;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
+	if (!nv_encoder)
+		return -ENOMEM;
+
+	nv_encoder->enc_save = nv04_dfp_save;
+	nv_encoder->enc_restore = nv04_dfp_restore;
+
+	encoder = to_drm_encoder(nv_encoder);
+
+	nv_encoder->dcb = entry;
+	nv_encoder->or = ffs(entry->or) - 1;
+
+	drm_encoder_init(connector->dev, encoder, &nv04_dfp_funcs, type, NULL);
+	drm_encoder_helper_add(encoder, helper);
+
+	encoder->possible_crtcs = entry->heads;
+	encoder->possible_clones = 0;
+
+	if (entry->type == DCB_OUTPUT_TMDS &&
+	    entry->location != DCB_LOC_ON_CHIP)
+		nv04_tmds_slave_init(encoder);
+
+	drm_connector_attach_encoder(connector, encoder);
+	return 0;
+}