Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 888 insertions, 0 deletions

diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4_core.c b/drivers/gpu/drm/omapdrm/dss/hdmi4_core.c
new file mode 100644
index 000000000..8720bf4f1
--- /dev/null
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4_core.c
@@ -0,0 +1,888 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HDMI TI81xx, TI38xx, TI OMAP4 etc IP driver Library
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/
+ * Authors: Yong Zhi
+ *	Mythri pk <mythripk@ti.com>
+ */
+
+#define DSS_SUBSYS_NAME "HDMICORE"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/sys_soc.h>
+#include <sound/asound.h>
+#include <sound/asoundef.h>
+
+#include "hdmi4_core.h"
+
+#define HDMI_CORE_AV		0x500
+
+static inline void __iomem *hdmi_av_base(struct hdmi_core_data *core)
+{
+	return core->base + HDMI_CORE_AV;
+}
+
+int hdmi4_core_ddc_init(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+
+	/* Turn on CLK for DDC */
+	REG_FLD_MOD(base, HDMI_CORE_AV_DPD, 0x7, 2, 0);
+
+	/* IN_PROG */
+	if (REG_GET(base, HDMI_CORE_DDC_STATUS, 4, 4) == 1) {
+		/* Abort transaction */
+		REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0xf, 3, 0);
+		/* IN_PROG */
+		if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
+					4, 4, 0) != 0) {
+			DSSERR("Timeout aborting DDC transaction\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	/* Clk SCL Devices */
+	REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0xA, 3, 0);
+
+	/* HDMI_CORE_DDC_STATUS_IN_PROG */
+	if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
+				4, 4, 0) != 0) {
+		DSSERR("Timeout starting SCL clock\n");
+		return -ETIMEDOUT;
+	}
+
+	/* Clear FIFO */
+	REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0x9, 3, 0);
+
+	/* HDMI_CORE_DDC_STATUS_IN_PROG */
+	if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
+				4, 4, 0) != 0) {
+		DSSERR("Timeout clearing DDC fifo\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+int hdmi4_core_ddc_read(void *data, u8 *buf, unsigned int block, size_t len)
+{
+	struct hdmi_core_data *core = data;
+	void __iomem *base = core->base;
+	u32 i;
+
+	/* HDMI_CORE_DDC_STATUS_IN_PROG */
+	if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
+				4, 4, 0) != 0) {
+		DSSERR("Timeout waiting DDC to be ready\n");
+		return -ETIMEDOUT;
+	}
+
+	/* Load Segment Address Register */
+	REG_FLD_MOD(base, HDMI_CORE_DDC_SEGM, block / 2, 7, 0);
+
+	/* Load Slave Address Register */
+	REG_FLD_MOD(base, HDMI_CORE_DDC_ADDR, 0xA0 >> 1, 7, 1);
+
+	/* Load Offset Address Register */
+	REG_FLD_MOD(base, HDMI_CORE_DDC_OFFSET, block % 2 ? 0x80 : 0, 7, 0);
+
+	/* Load Byte Count */
+	REG_FLD_MOD(base, HDMI_CORE_DDC_COUNT1, len, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_DDC_COUNT2, 0x0, 1, 0);
+
+	/* Set DDC_CMD */
+	if (block)
+		REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0x4, 3, 0);
+	else
+		REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0x2, 3, 0);
+
+	/* HDMI_CORE_DDC_STATUS_BUS_LOW */
+	if (REG_GET(base, HDMI_CORE_DDC_STATUS, 6, 6) == 1) {
+		DSSERR("I2C Bus Low?\n");
+		return -EIO;
+	}
+	/* HDMI_CORE_DDC_STATUS_NO_ACK */
+	if (REG_GET(base, HDMI_CORE_DDC_STATUS, 5, 5) == 1) {
+		DSSERR("I2C No Ack\n");
+		return -EIO;
+	}
+
+	for (i = 0; i < len; ++i) {
+		int t;
+
+		/* IN_PROG */
+		if (REG_GET(base, HDMI_CORE_DDC_STATUS, 4, 4) == 0) {
+			DSSERR("operation stopped when reading edid\n");
+			return -EIO;
+		}
+
+		t = 0;
+		/* FIFO_EMPTY */
+		while (REG_GET(base, HDMI_CORE_DDC_STATUS, 2, 2) == 1) {
+			if (t++ > 10000) {
+				DSSERR("timeout reading edid\n");
+				return -ETIMEDOUT;
+			}
+			udelay(1);
+		}
+
+		buf[i] = REG_GET(base, HDMI_CORE_DDC_DATA, 7, 0);
+	}
+
+	return 0;
+}
+
+static void hdmi_core_init(struct hdmi_core_video_config *video_cfg)
+{
+	DSSDBG("Enter hdmi_core_init\n");
+
+	/* video core */
+	video_cfg->ip_bus_width = HDMI_INPUT_8BIT;
+	video_cfg->op_dither_truc = HDMI_OUTPUTTRUNCATION_8BIT;
+	video_cfg->deep_color_pkt = HDMI_DEEPCOLORPACKECTDISABLE;
+	video_cfg->pkt_mode = HDMI_PACKETMODERESERVEDVALUE;
+	video_cfg->hdmi_dvi = HDMI_DVI;
+	video_cfg->tclk_sel_clkmult = HDMI_FPLL10IDCK;
+}
+
+void hdmi4_core_powerdown_disable(struct hdmi_core_data *core)
+{
+	DSSDBG("Enter hdmi4_core_powerdown_disable\n");
+	REG_FLD_MOD(core->base, HDMI_CORE_SYS_SYS_CTRL1, 0x1, 0, 0);
+}
+
+static void hdmi_core_swreset_release(struct hdmi_core_data *core)
+{
+	DSSDBG("Enter hdmi_core_swreset_release\n");
+	REG_FLD_MOD(core->base, HDMI_CORE_SYS_SRST, 0x0, 0, 0);
+}
+
+static void hdmi_core_swreset_assert(struct hdmi_core_data *core)
+{
+	DSSDBG("Enter hdmi_core_swreset_assert\n");
+	REG_FLD_MOD(core->base, HDMI_CORE_SYS_SRST, 0x1, 0, 0);
+}
+
+/* HDMI_CORE_VIDEO_CONFIG */
+static void hdmi_core_video_config(struct hdmi_core_data *core,
+				struct hdmi_core_video_config *cfg)
+{
+	u32 r = 0;
+	void __iomem *core_sys_base = core->base;
+	void __iomem *core_av_base = hdmi_av_base(core);
+
+	/* sys_ctrl1 default configuration not tunable */
+	r = hdmi_read_reg(core_sys_base, HDMI_CORE_SYS_SYS_CTRL1);
+	r = FLD_MOD(r, HDMI_CORE_SYS_SYS_CTRL1_VEN_FOLLOWVSYNC, 5, 5);
+	r = FLD_MOD(r, HDMI_CORE_SYS_SYS_CTRL1_HEN_FOLLOWHSYNC, 4, 4);
+	r = FLD_MOD(r, HDMI_CORE_SYS_SYS_CTRL1_BSEL_24BITBUS, 2, 2);
+	r = FLD_MOD(r, HDMI_CORE_SYS_SYS_CTRL1_EDGE_RISINGEDGE, 1, 1);
+	hdmi_write_reg(core_sys_base, HDMI_CORE_SYS_SYS_CTRL1, r);
+
+	REG_FLD_MOD(core_sys_base,
+			HDMI_CORE_SYS_VID_ACEN, cfg->ip_bus_width, 7, 6);
+
+	/* Vid_Mode */
+	r = hdmi_read_reg(core_sys_base, HDMI_CORE_SYS_VID_MODE);
+
+	/* dither truncation configuration */
+	if (cfg->op_dither_truc > HDMI_OUTPUTTRUNCATION_12BIT) {
+		r = FLD_MOD(r, cfg->op_dither_truc - 3, 7, 6);
+		r = FLD_MOD(r, 1, 5, 5);
+	} else {
+		r = FLD_MOD(r, cfg->op_dither_truc, 7, 6);
+		r = FLD_MOD(r, 0, 5, 5);
+	}
+	hdmi_write_reg(core_sys_base, HDMI_CORE_SYS_VID_MODE, r);
+
+	/* HDMI_Ctrl */
+	r = hdmi_read_reg(core_av_base, HDMI_CORE_AV_HDMI_CTRL);
+	r = FLD_MOD(r, cfg->deep_color_pkt, 6, 6);
+	r = FLD_MOD(r, cfg->pkt_mode, 5, 3);
+	r = FLD_MOD(r, cfg->hdmi_dvi, 0, 0);
+	hdmi_write_reg(core_av_base, HDMI_CORE_AV_HDMI_CTRL, r);
+
+	/* TMDS_CTRL */
+	REG_FLD_MOD(core_sys_base,
+			HDMI_CORE_SYS_TMDS_CTRL, cfg->tclk_sel_clkmult, 6, 5);
+}
+
+static void hdmi_core_write_avi_infoframe(struct hdmi_core_data *core,
+	struct hdmi_avi_infoframe *frame)
+{
+	void __iomem *av_base = hdmi_av_base(core);
+	u8 data[HDMI_INFOFRAME_SIZE(AVI)];
+	int i;
+
+	hdmi_avi_infoframe_pack(frame, data, sizeof(data));
+
+	print_hex_dump_debug("AVI: ", DUMP_PREFIX_NONE, 16, 1, data,
+		HDMI_INFOFRAME_SIZE(AVI), false);
+
+	for (i = 0; i < sizeof(data); ++i) {
+		hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_BASE + i * 4,
+			data[i]);
+	}
+}
+
+static void hdmi_core_av_packet_config(struct hdmi_core_data *core,
+		struct hdmi_core_packet_enable_repeat repeat_cfg)
+{
+	/* enable/repeat the infoframe */
+	hdmi_write_reg(hdmi_av_base(core), HDMI_CORE_AV_PB_CTRL1,
+		(repeat_cfg.audio_pkt << 5) |
+		(repeat_cfg.audio_pkt_repeat << 4) |
+		(repeat_cfg.avi_infoframe << 1) |
+		(repeat_cfg.avi_infoframe_repeat));
+
+	/* enable/repeat the packet */
+	hdmi_write_reg(hdmi_av_base(core), HDMI_CORE_AV_PB_CTRL2,
+		(repeat_cfg.gen_cntrl_pkt << 3) |
+		(repeat_cfg.gen_cntrl_pkt_repeat << 2) |
+		(repeat_cfg.generic_pkt << 1) |
+		(repeat_cfg.generic_pkt_repeat));
+}
+
+void hdmi4_configure(struct hdmi_core_data *core,
+	struct hdmi_wp_data *wp, struct hdmi_config *cfg)
+{
+	/* HDMI */
+	struct videomode vm;
+	struct hdmi_video_format video_format;
+	/* HDMI core */
+	struct hdmi_core_video_config v_core_cfg;
+	struct hdmi_core_packet_enable_repeat repeat_cfg = { 0 };
+
+	hdmi_core_init(&v_core_cfg);
+
+	hdmi_wp_init_vid_fmt_timings(&video_format, &vm, cfg);
+
+	hdmi_wp_video_config_timing(wp, &vm);
+
+	/* video config */
+	video_format.packing_mode = HDMI_PACK_24b_RGB_YUV444_YUV422;
+
+	hdmi_wp_video_config_format(wp, &video_format);
+
+	hdmi_wp_video_config_interface(wp, &vm);
+
+	/*
+	 * configure core video part
+	 * set software reset in the core
+	 */
+	hdmi_core_swreset_assert(core);
+
+	v_core_cfg.pkt_mode = HDMI_PACKETMODE24BITPERPIXEL;
+	v_core_cfg.hdmi_dvi = cfg->hdmi_dvi_mode;
+
+	hdmi_core_video_config(core, &v_core_cfg);
+
+	/* release software reset in the core */
+	hdmi_core_swreset_release(core);
+
+	if (cfg->hdmi_dvi_mode == HDMI_HDMI) {
+		hdmi_core_write_avi_infoframe(core, &cfg->infoframe);
+
+		/* enable/repeat the infoframe */
+		repeat_cfg.avi_infoframe = HDMI_PACKETENABLE;
+		repeat_cfg.avi_infoframe_repeat = HDMI_PACKETREPEATON;
+		/* wakeup */
+		repeat_cfg.audio_pkt = HDMI_PACKETENABLE;
+		repeat_cfg.audio_pkt_repeat = HDMI_PACKETREPEATON;
+	}
+
+	hdmi_core_av_packet_config(core, repeat_cfg);
+}
+
+void hdmi4_core_dump(struct hdmi_core_data *core, struct seq_file *s)
+{
+	int i;
+
+#define CORE_REG(i, name) name(i)
+#define DUMPCORE(r) seq_printf(s, "%-35s %08x\n", #r,\
+		hdmi_read_reg(core->base, r))
+#define DUMPCOREAV(r) seq_printf(s, "%-35s %08x\n", #r,\
+		hdmi_read_reg(hdmi_av_base(core), r))
+#define DUMPCOREAV2(i, r) seq_printf(s, "%s[%d]%*s %08x\n", #r, i, \
+		(i < 10) ? 32 - (int)strlen(#r) : 31 - (int)strlen(#r), " ", \
+		hdmi_read_reg(hdmi_av_base(core), CORE_REG(i, r)))
+
+	DUMPCORE(HDMI_CORE_SYS_VND_IDL);
+	DUMPCORE(HDMI_CORE_SYS_DEV_IDL);
+	DUMPCORE(HDMI_CORE_SYS_DEV_IDH);
+	DUMPCORE(HDMI_CORE_SYS_DEV_REV);
+	DUMPCORE(HDMI_CORE_SYS_SRST);
+	DUMPCORE(HDMI_CORE_SYS_SYS_CTRL1);
+	DUMPCORE(HDMI_CORE_SYS_SYS_STAT);
+	DUMPCORE(HDMI_CORE_SYS_SYS_CTRL3);
+	DUMPCORE(HDMI_CORE_SYS_DE_DLY);
+	DUMPCORE(HDMI_CORE_SYS_DE_CTRL);
+	DUMPCORE(HDMI_CORE_SYS_DE_TOP);
+	DUMPCORE(HDMI_CORE_SYS_DE_CNTL);
+	DUMPCORE(HDMI_CORE_SYS_DE_CNTH);
+	DUMPCORE(HDMI_CORE_SYS_DE_LINL);
+	DUMPCORE(HDMI_CORE_SYS_DE_LINH_1);
+	DUMPCORE(HDMI_CORE_SYS_HRES_L);
+	DUMPCORE(HDMI_CORE_SYS_HRES_H);
+	DUMPCORE(HDMI_CORE_SYS_VRES_L);
+	DUMPCORE(HDMI_CORE_SYS_VRES_H);
+	DUMPCORE(HDMI_CORE_SYS_IADJUST);
+	DUMPCORE(HDMI_CORE_SYS_POLDETECT);
+	DUMPCORE(HDMI_CORE_SYS_HWIDTH1);
+	DUMPCORE(HDMI_CORE_SYS_HWIDTH2);
+	DUMPCORE(HDMI_CORE_SYS_VWIDTH);
+	DUMPCORE(HDMI_CORE_SYS_VID_CTRL);
+	DUMPCORE(HDMI_CORE_SYS_VID_ACEN);
+	DUMPCORE(HDMI_CORE_SYS_VID_MODE);
+	DUMPCORE(HDMI_CORE_SYS_VID_BLANK1);
+	DUMPCORE(HDMI_CORE_SYS_VID_BLANK3);
+	DUMPCORE(HDMI_CORE_SYS_VID_BLANK1);
+	DUMPCORE(HDMI_CORE_SYS_DC_HEADER);
+	DUMPCORE(HDMI_CORE_SYS_VID_DITHER);
+	DUMPCORE(HDMI_CORE_SYS_RGB2XVYCC_CT);
+	DUMPCORE(HDMI_CORE_SYS_R2Y_COEFF_LOW);
+	DUMPCORE(HDMI_CORE_SYS_R2Y_COEFF_UP);
+	DUMPCORE(HDMI_CORE_SYS_G2Y_COEFF_LOW);
+	DUMPCORE(HDMI_CORE_SYS_G2Y_COEFF_UP);
+	DUMPCORE(HDMI_CORE_SYS_B2Y_COEFF_LOW);
+	DUMPCORE(HDMI_CORE_SYS_B2Y_COEFF_UP);
+	DUMPCORE(HDMI_CORE_SYS_R2CB_COEFF_LOW);
+	DUMPCORE(HDMI_CORE_SYS_R2CB_COEFF_UP);
+	DUMPCORE(HDMI_CORE_SYS_G2CB_COEFF_LOW);
+	DUMPCORE(HDMI_CORE_SYS_G2CB_COEFF_UP);
+	DUMPCORE(HDMI_CORE_SYS_B2CB_COEFF_LOW);
+	DUMPCORE(HDMI_CORE_SYS_B2CB_COEFF_UP);
+	DUMPCORE(HDMI_CORE_SYS_R2CR_COEFF_LOW);
+	DUMPCORE(HDMI_CORE_SYS_R2CR_COEFF_UP);
+	DUMPCORE(HDMI_CORE_SYS_G2CR_COEFF_LOW);
+	DUMPCORE(HDMI_CORE_SYS_G2CR_COEFF_UP);
+	DUMPCORE(HDMI_CORE_SYS_B2CR_COEFF_LOW);
+	DUMPCORE(HDMI_CORE_SYS_B2CR_COEFF_UP);
+	DUMPCORE(HDMI_CORE_SYS_RGB_OFFSET_LOW);
+	DUMPCORE(HDMI_CORE_SYS_RGB_OFFSET_UP);
+	DUMPCORE(HDMI_CORE_SYS_Y_OFFSET_LOW);
+	DUMPCORE(HDMI_CORE_SYS_Y_OFFSET_UP);
+	DUMPCORE(HDMI_CORE_SYS_CBCR_OFFSET_LOW);
+	DUMPCORE(HDMI_CORE_SYS_CBCR_OFFSET_UP);
+	DUMPCORE(HDMI_CORE_SYS_INTR_STATE);
+	DUMPCORE(HDMI_CORE_SYS_INTR1);
+	DUMPCORE(HDMI_CORE_SYS_INTR2);
+	DUMPCORE(HDMI_CORE_SYS_INTR3);
+	DUMPCORE(HDMI_CORE_SYS_INTR4);
+	DUMPCORE(HDMI_CORE_SYS_INTR_UNMASK1);
+	DUMPCORE(HDMI_CORE_SYS_INTR_UNMASK2);
+	DUMPCORE(HDMI_CORE_SYS_INTR_UNMASK3);
+	DUMPCORE(HDMI_CORE_SYS_INTR_UNMASK4);
+	DUMPCORE(HDMI_CORE_SYS_INTR_CTRL);
+	DUMPCORE(HDMI_CORE_SYS_TMDS_CTRL);
+
+	DUMPCORE(HDMI_CORE_DDC_ADDR);
+	DUMPCORE(HDMI_CORE_DDC_SEGM);
+	DUMPCORE(HDMI_CORE_DDC_OFFSET);
+	DUMPCORE(HDMI_CORE_DDC_COUNT1);
+	DUMPCORE(HDMI_CORE_DDC_COUNT2);
+	DUMPCORE(HDMI_CORE_DDC_STATUS);
+	DUMPCORE(HDMI_CORE_DDC_CMD);
+	DUMPCORE(HDMI_CORE_DDC_DATA);
+
+	DUMPCOREAV(HDMI_CORE_AV_ACR_CTRL);
+	DUMPCOREAV(HDMI_CORE_AV_FREQ_SVAL);
+	DUMPCOREAV(HDMI_CORE_AV_N_SVAL1);
+	DUMPCOREAV(HDMI_CORE_AV_N_SVAL2);
+	DUMPCOREAV(HDMI_CORE_AV_N_SVAL3);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_SVAL1);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_SVAL2);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_SVAL3);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_HVAL1);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_HVAL2);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_HVAL3);
+	DUMPCOREAV(HDMI_CORE_AV_AUD_MODE);
+	DUMPCOREAV(HDMI_CORE_AV_SPDIF_CTRL);
+	DUMPCOREAV(HDMI_CORE_AV_HW_SPDIF_FS);
+	DUMPCOREAV(HDMI_CORE_AV_SWAP_I2S);
+	DUMPCOREAV(HDMI_CORE_AV_SPDIF_ERTH);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_IN_MAP);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_IN_CTRL);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST0);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST1);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST2);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST4);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST5);
+	DUMPCOREAV(HDMI_CORE_AV_ASRC);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_IN_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_HDMI_CTRL);
+	DUMPCOREAV(HDMI_CORE_AV_AUDO_TXSTAT);
+	DUMPCOREAV(HDMI_CORE_AV_AUD_PAR_BUSCLK_1);
+	DUMPCOREAV(HDMI_CORE_AV_AUD_PAR_BUSCLK_2);
+	DUMPCOREAV(HDMI_CORE_AV_AUD_PAR_BUSCLK_3);
+	DUMPCOREAV(HDMI_CORE_AV_TEST_TXCTRL);
+	DUMPCOREAV(HDMI_CORE_AV_DPD);
+	DUMPCOREAV(HDMI_CORE_AV_PB_CTRL1);
+	DUMPCOREAV(HDMI_CORE_AV_PB_CTRL2);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_TYPE);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_VERS);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_CHSUM);
+
+	for (i = 0; i < HDMI_CORE_AV_AVI_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_AVI_DBYTE);
+
+	DUMPCOREAV(HDMI_CORE_AV_SPD_TYPE);
+	DUMPCOREAV(HDMI_CORE_AV_SPD_VERS);
+	DUMPCOREAV(HDMI_CORE_AV_SPD_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_SPD_CHSUM);
+
+	for (i = 0; i < HDMI_CORE_AV_SPD_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_SPD_DBYTE);
+
+	DUMPCOREAV(HDMI_CORE_AV_AUDIO_TYPE);
+	DUMPCOREAV(HDMI_CORE_AV_AUDIO_VERS);
+	DUMPCOREAV(HDMI_CORE_AV_AUDIO_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_AUDIO_CHSUM);
+
+	for (i = 0; i < HDMI_CORE_AV_AUD_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_AUD_DBYTE);
+
+	DUMPCOREAV(HDMI_CORE_AV_MPEG_TYPE);
+	DUMPCOREAV(HDMI_CORE_AV_MPEG_VERS);
+	DUMPCOREAV(HDMI_CORE_AV_MPEG_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_MPEG_CHSUM);
+
+	for (i = 0; i < HDMI_CORE_AV_MPEG_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_MPEG_DBYTE);
+
+	for (i = 0; i < HDMI_CORE_AV_GEN_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_GEN_DBYTE);
+
+	DUMPCOREAV(HDMI_CORE_AV_CP_BYTE1);
+
+	for (i = 0; i < HDMI_CORE_AV_GEN2_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_GEN2_DBYTE);
+
+	DUMPCOREAV(HDMI_CORE_AV_CEC_ADDR_ID);
+}
+
+static void hdmi_core_audio_config(struct hdmi_core_data *core,
+					struct hdmi_core_audio_config *cfg)
+{
+	u32 r;
+	void __iomem *av_base = hdmi_av_base(core);
+
+	/*
+	 * Parameters for generation of Audio Clock Recovery packets
+	 */
+	REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL1, cfg->n, 7, 0);
+	REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL2, cfg->n >> 8, 7, 0);
+	REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL3, cfg->n >> 16, 7, 0);
+
+	if (cfg->cts_mode == HDMI_AUDIO_CTS_MODE_SW) {
+		REG_FLD_MOD(av_base, HDMI_CORE_AV_CTS_SVAL1, cfg->cts, 7, 0);
+		REG_FLD_MOD(av_base,
+				HDMI_CORE_AV_CTS_SVAL2, cfg->cts >> 8, 7, 0);
+		REG_FLD_MOD(av_base,
+				HDMI_CORE_AV_CTS_SVAL3, cfg->cts >> 16, 7, 0);
+	} else {
+		REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_1,
+				cfg->aud_par_busclk, 7, 0);
+		REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_2,
+				(cfg->aud_par_busclk >> 8), 7, 0);
+		REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_3,
+				(cfg->aud_par_busclk >> 16), 7, 0);
+	}
+
+	/* Set ACR clock divisor */
+	if (cfg->use_mclk)
+		REG_FLD_MOD(av_base, HDMI_CORE_AV_FREQ_SVAL,
+			    cfg->mclk_mode, 2, 0);
+
+	r = hdmi_read_reg(av_base, HDMI_CORE_AV_ACR_CTRL);
+	/*
+	 * Use TMDS clock for ACR packets. For devices that use
+	 * the MCLK, this is the first part of the MCLK initialization.
+	 */
+	r = FLD_MOD(r, 0, 2, 2);
+
+	r = FLD_MOD(r, cfg->en_acr_pkt, 1, 1);
+	r = FLD_MOD(r, cfg->cts_mode, 0, 0);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_ACR_CTRL, r);
+
+	/* For devices using MCLK, this completes its initialization. */
+	if (cfg->use_mclk)
+		REG_FLD_MOD(av_base, HDMI_CORE_AV_ACR_CTRL, 1, 2, 2);
+
+	/* Override of SPDIF sample frequency with value in I2S_CHST4 */
+	REG_FLD_MOD(av_base, HDMI_CORE_AV_SPDIF_CTRL,
+						cfg->fs_override, 1, 1);
+
+	/*
+	 * Set IEC-60958-3 channel status word. It is passed to the IP
+	 * just as it is received. The user of the driver is responsible
+	 * for its contents.
+	 */
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST0,
+		       cfg->iec60958_cfg->status[0]);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST1,
+		       cfg->iec60958_cfg->status[1]);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST2,
+		       cfg->iec60958_cfg->status[2]);
+	/* yes, this is correct: status[3] goes to CHST4 register */
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST4,
+		       cfg->iec60958_cfg->status[3]);
+	/* yes, this is correct: status[4] goes to CHST5 register */
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST5,
+		       cfg->iec60958_cfg->status[4]);
+
+	/* set I2S parameters */
+	r = hdmi_read_reg(av_base, HDMI_CORE_AV_I2S_IN_CTRL);
+	r = FLD_MOD(r, cfg->i2s_cfg.sck_edge_mode, 6, 6);
+	r = FLD_MOD(r, cfg->i2s_cfg.vbit, 4, 4);
+	r = FLD_MOD(r, cfg->i2s_cfg.justification, 2, 2);
+	r = FLD_MOD(r, cfg->i2s_cfg.direction, 1, 1);
+	r = FLD_MOD(r, cfg->i2s_cfg.shift, 0, 0);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_IN_CTRL, r);
+
+	REG_FLD_MOD(av_base, HDMI_CORE_AV_I2S_IN_LEN,
+			cfg->i2s_cfg.in_length_bits, 3, 0);
+
+	/* Audio channels and mode parameters */
+	REG_FLD_MOD(av_base, HDMI_CORE_AV_HDMI_CTRL, cfg->layout, 2, 1);
+	r = hdmi_read_reg(av_base, HDMI_CORE_AV_AUD_MODE);
+	r = FLD_MOD(r, cfg->i2s_cfg.active_sds, 7, 4);
+	r = FLD_MOD(r, cfg->en_dsd_audio, 3, 3);
+	r = FLD_MOD(r, cfg->en_parallel_aud_input, 2, 2);
+	r = FLD_MOD(r, cfg->en_spdif, 1, 1);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_MODE, r);
+
+	/* Audio channel mappings */
+	/* TODO: Make channel mapping dynamic. For now, map channels
+	 * in the ALSA order: FL/FR/RL/RR/C/LFE/SL/SR. Remapping is needed as
+	 * HDMI speaker order is different. See CEA-861 Section 6.6.2.
+	 */
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_IN_MAP, 0x78);
+	REG_FLD_MOD(av_base, HDMI_CORE_AV_SWAP_I2S, 1, 5, 5);
+}
+
+static void hdmi_core_audio_infoframe_cfg(struct hdmi_core_data *core,
+		struct snd_cea_861_aud_if *info_aud)
+{
+	u8 sum = 0, checksum = 0;
+	void __iomem *av_base = hdmi_av_base(core);
+
+	/*
+	 * Set audio info frame type, version and length as
+	 * described in HDMI 1.4a Section 8.2.2 specification.
+	 * Checksum calculation is defined in Section 5.3.5.
+	 */
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUDIO_TYPE, 0x84);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUDIO_VERS, 0x01);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUDIO_LEN, 0x0a);
+	sum += 0x84 + 0x001 + 0x00a;
+
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(0),
+		       info_aud->db1_ct_cc);
+	sum += info_aud->db1_ct_cc;
+
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(1),
+		       info_aud->db2_sf_ss);
+	sum += info_aud->db2_sf_ss;
+
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(2), info_aud->db3);
+	sum += info_aud->db3;
+
+	/*
+	 * The OMAP HDMI IP requires to use the 8-channel channel code when
+	 * transmitting more than two channels.
+	 */
+	if (info_aud->db4_ca != 0x00)
+		info_aud->db4_ca = 0x13;
+
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(3), info_aud->db4_ca);
+	sum += info_aud->db4_ca;
+
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(4),
+		       info_aud->db5_dminh_lsv);
+	sum += info_aud->db5_dminh_lsv;
+
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(5), 0x00);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(6), 0x00);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(7), 0x00);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(8), 0x00);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(9), 0x00);
+
+	checksum = 0x100 - sum;
+	hdmi_write_reg(av_base,
+					HDMI_CORE_AV_AUDIO_CHSUM, checksum);
+
+	/*
+	 * TODO: Add MPEG and SPD enable and repeat cfg when EDID parsing
+	 * is available.
+	 */
+}
+
+int hdmi4_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+		struct omap_dss_audio *audio, u32 pclk)
+{
+	struct hdmi_audio_format audio_format;
+	struct hdmi_audio_dma audio_dma;
+	struct hdmi_core_audio_config acore;
+	int n, cts, channel_count;
+	unsigned int fs_nr;
+	bool word_length_16b = false;
+
+	if (!audio || !audio->iec || !audio->cea || !core)
+		return -EINVAL;
+
+	acore.iec60958_cfg = audio->iec;
+	/*
+	 * In the IEC-60958 status word, check if the audio sample word length
+	 * is 16-bit as several optimizations can be performed in such case.
+	 */
+	if (!(audio->iec->status[4] & IEC958_AES4_CON_MAX_WORDLEN_24))
+		if (audio->iec->status[4] & IEC958_AES4_CON_WORDLEN_20_16)
+			word_length_16b = true;
+
+	/* I2S configuration. See Phillips' specification */
+	if (word_length_16b)
+		acore.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_LEFT;
+	else
+		acore.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
+	/*
+	 * The I2S input word length is twice the length given in the IEC-60958
+	 * status word. If the word size is greater than
+	 * 20 bits, increment by one.
+	 */
+	acore.i2s_cfg.in_length_bits = audio->iec->status[4]
+		& IEC958_AES4_CON_WORDLEN;
+	if (audio->iec->status[4] & IEC958_AES4_CON_MAX_WORDLEN_24)
+		acore.i2s_cfg.in_length_bits++;
+	acore.i2s_cfg.sck_edge_mode = HDMI_AUDIO_I2S_SCK_EDGE_RISING;
+	acore.i2s_cfg.vbit = HDMI_AUDIO_I2S_VBIT_FOR_PCM;
+	acore.i2s_cfg.direction = HDMI_AUDIO_I2S_MSB_SHIFTED_FIRST;
+	acore.i2s_cfg.shift = HDMI_AUDIO_I2S_FIRST_BIT_SHIFT;
+
+	/* convert sample frequency to a number */
+	switch (audio->iec->status[3] & IEC958_AES3_CON_FS) {
+	case IEC958_AES3_CON_FS_32000:
+		fs_nr = 32000;
+		break;
+	case IEC958_AES3_CON_FS_44100:
+		fs_nr = 44100;
+		break;
+	case IEC958_AES3_CON_FS_48000:
+		fs_nr = 48000;
+		break;
+	case IEC958_AES3_CON_FS_88200:
+		fs_nr = 88200;
+		break;
+	case IEC958_AES3_CON_FS_96000:
+		fs_nr = 96000;
+		break;
+	case IEC958_AES3_CON_FS_176400:
+		fs_nr = 176400;
+		break;
+	case IEC958_AES3_CON_FS_192000:
+		fs_nr = 192000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	hdmi_compute_acr(pclk, fs_nr, &n, &cts);
+
+	/* Audio clock regeneration settings */
+	acore.n = n;
+	acore.cts = cts;
+	if (core->cts_swmode) {
+		acore.aud_par_busclk = 0;
+		acore.cts_mode = HDMI_AUDIO_CTS_MODE_SW;
+		acore.use_mclk = core->audio_use_mclk;
+	} else {
+		acore.aud_par_busclk = (((128 * 31) - 1) << 8);
+		acore.cts_mode = HDMI_AUDIO_CTS_MODE_HW;
+		acore.use_mclk = true;
+	}
+
+	if (acore.use_mclk)
+		acore.mclk_mode = HDMI_AUDIO_MCLK_128FS;
+
+	/* Audio channels settings */
+	channel_count = (audio->cea->db1_ct_cc &
+			 CEA861_AUDIO_INFOFRAME_DB1CC) + 1;
+
+	switch (channel_count) {
+	case 2:
+		audio_format.active_chnnls_msk = 0x03;
+		break;
+	case 3:
+		audio_format.active_chnnls_msk = 0x07;
+		break;
+	case 4:
+		audio_format.active_chnnls_msk = 0x0f;
+		break;
+	case 5:
+		audio_format.active_chnnls_msk = 0x1f;
+		break;
+	case 6:
+		audio_format.active_chnnls_msk = 0x3f;
+		break;
+	case 7:
+		audio_format.active_chnnls_msk = 0x7f;
+		break;
+	case 8:
+		audio_format.active_chnnls_msk = 0xff;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * the HDMI IP needs to enable four stereo channels when transmitting
+	 * more than 2 audio channels.  Similarly, the channel count in the
+	 * Audio InfoFrame has to match the sample_present bits (some channels
+	 * are padded with zeroes)
+	 */
+	if (channel_count == 2) {
+		audio_format.stereo_channels = HDMI_AUDIO_STEREO_ONECHANNEL;
+		acore.i2s_cfg.active_sds = HDMI_AUDIO_I2S_SD0_EN;
+		acore.layout = HDMI_AUDIO_LAYOUT_2CH;
+	} else {
+		audio_format.stereo_channels = HDMI_AUDIO_STEREO_FOURCHANNELS;
+		acore.i2s_cfg.active_sds = HDMI_AUDIO_I2S_SD0_EN |
+				HDMI_AUDIO_I2S_SD1_EN | HDMI_AUDIO_I2S_SD2_EN |
+				HDMI_AUDIO_I2S_SD3_EN;
+		acore.layout = HDMI_AUDIO_LAYOUT_8CH;
+		audio->cea->db1_ct_cc = 7;
+	}
+
+	acore.en_spdif = false;
+	/* use sample frequency from channel status word */
+	acore.fs_override = true;
+	/* enable ACR packets */
+	acore.en_acr_pkt = true;
+	/* disable direct streaming digital audio */
+	acore.en_dsd_audio = false;
+	/* use parallel audio interface */
+	acore.en_parallel_aud_input = true;
+
+	/* DMA settings */
+	if (word_length_16b)
+		audio_dma.transfer_size = 0x10;
+	else
+		audio_dma.transfer_size = 0x20;
+	audio_dma.block_size = 0xC0;
+	audio_dma.mode = HDMI_AUDIO_TRANSF_DMA;
+	audio_dma.fifo_threshold = 0x20; /* in number of samples */
+
+	/* audio FIFO format settings */
+	if (word_length_16b) {
+		audio_format.samples_per_word = HDMI_AUDIO_ONEWORD_TWOSAMPLES;
+		audio_format.sample_size = HDMI_AUDIO_SAMPLE_16BITS;
+		audio_format.justification = HDMI_AUDIO_JUSTIFY_LEFT;
+	} else {
+		audio_format.samples_per_word = HDMI_AUDIO_ONEWORD_ONESAMPLE;
+		audio_format.sample_size = HDMI_AUDIO_SAMPLE_24BITS;
+		audio_format.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
+	}
+	audio_format.type = HDMI_AUDIO_TYPE_LPCM;
+	audio_format.sample_order = HDMI_AUDIO_SAMPLE_LEFT_FIRST;
+	/* disable start/stop signals of IEC 60958 blocks */
+	audio_format.en_sig_blk_strt_end = HDMI_AUDIO_BLOCK_SIG_STARTEND_ON;
+
+	/* configure DMA and audio FIFO format*/
+	hdmi_wp_audio_config_dma(wp, &audio_dma);
+	hdmi_wp_audio_config_format(wp, &audio_format);
+
+	/* configure the core*/
+	hdmi_core_audio_config(core, &acore);
+
+	/* configure CEA 861 audio infoframe*/
+	hdmi_core_audio_infoframe_cfg(core, audio->cea);
+
+	return 0;
+}
+
+int hdmi4_audio_start(struct hdmi_core_data *core, struct hdmi_wp_data *wp)
+{
+	REG_FLD_MOD(hdmi_av_base(core),
+		    HDMI_CORE_AV_AUD_MODE, true, 0, 0);
+
+	hdmi_wp_audio_core_req_enable(wp, true);
+
+	return 0;
+}
+
+void hdmi4_audio_stop(struct hdmi_core_data *core, struct hdmi_wp_data *wp)
+{
+	REG_FLD_MOD(hdmi_av_base(core),
+		    HDMI_CORE_AV_AUD_MODE, false, 0, 0);
+
+	hdmi_wp_audio_core_req_enable(wp, false);
+}
+
+struct hdmi4_features {
+	bool cts_swmode;
+	bool audio_use_mclk;
+};
+
+static const struct hdmi4_features hdmi4430_es1_features = {
+	.cts_swmode = false,
+	.audio_use_mclk = false,
+};
+
+static const struct hdmi4_features hdmi4430_es2_features = {
+	.cts_swmode = true,
+	.audio_use_mclk = false,
+};
+
+static const struct hdmi4_features hdmi4_features = {
+	.cts_swmode = true,
+	.audio_use_mclk = true,
+};
+
+static const struct soc_device_attribute hdmi4_soc_devices[] = {
+	{
+		.machine = "OMAP4430",
+		.revision = "ES1.?",
+		.data = &hdmi4430_es1_features,
+	},
+	{
+		.machine = "OMAP4430",
+		.revision = "ES2.?",
+		.data = &hdmi4430_es2_features,
+	},
+	{
+		.family = "OMAP4",
+		.data = &hdmi4_features,
+	},
+	{ /* sentinel */ }
+};
+
+int hdmi4_core_init(struct platform_device *pdev, struct hdmi_core_data *core)
+{
+	const struct hdmi4_features *features;
+	const struct soc_device_attribute *soc;
+
+	soc = soc_device_match(hdmi4_soc_devices);
+	if (!soc)
+		return -ENODEV;
+
+	features = soc->data;
+	core->cts_swmode = features->cts_swmode;
+	core->audio_use_mclk = features->audio_use_mclk;
+
+	core->base = devm_platform_ioremap_resource_byname(pdev, "core");
+	if (IS_ERR(core->base))
+		return PTR_ERR(core->base);
+
+	return 0;
+}