Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 880 insertions, 0 deletions

diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
new file mode 100644
index 000000000..21564c382
--- /dev/null
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
@@ -0,0 +1,880 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP5 HDMI CORE IP driver library
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
+ * Authors:
+ *	Yong Zhi
+ *	Mythri pk
+ *	Archit Taneja <archit@ti.com>
+ *	Tomi Valkeinen <tomi.valkeinen@ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <drm/drm_edid.h>
+#include <sound/asound.h>
+#include <sound/asoundef.h>
+
+#include "hdmi5_core.h"
+
+void hdmi5_core_ddc_init(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+	const unsigned long long iclk = 266000000;	/* DSS L3 ICLK */
+	const unsigned int ss_scl_high = 4700;		/* ns */
+	const unsigned int ss_scl_low = 5500;		/* ns */
+	const unsigned int fs_scl_high = 600;		/* ns */
+	const unsigned int fs_scl_low = 1300;		/* ns */
+	const unsigned int sda_hold = 1000;		/* ns */
+	const unsigned int sfr_div = 10;
+	unsigned long long sfr;
+	unsigned int v;
+
+	sfr = iclk / sfr_div;	/* SFR_DIV */
+	sfr /= 1000;		/* SFR clock in kHz */
+
+	/* Reset */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SOFTRSTZ, 0, 0, 0);
+	if (hdmi_wait_for_bit_change(base, HDMI_CORE_I2CM_SOFTRSTZ,
+				0, 0, 1) != 1)
+		DSSERR("HDMI I2CM reset failed\n");
+
+	/* Standard (0) or Fast (1) Mode */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_DIV, 0, 3, 3);
+
+	/* Standard Mode SCL High counter */
+	v = DIV_ROUND_UP_ULL(ss_scl_high * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_HCNT_1_ADDR,
+			(v >> 8) & 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_HCNT_0_ADDR,
+			v & 0xff, 7, 0);
+
+	/* Standard Mode SCL Low counter */
+	v = DIV_ROUND_UP_ULL(ss_scl_low * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_LCNT_1_ADDR,
+			(v >> 8) & 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_LCNT_0_ADDR,
+			v & 0xff, 7, 0);
+
+	/* Fast Mode SCL High Counter */
+	v = DIV_ROUND_UP_ULL(fs_scl_high * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_HCNT_1_ADDR,
+			(v >> 8) & 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_HCNT_0_ADDR,
+			v & 0xff, 7, 0);
+
+	/* Fast Mode SCL Low Counter */
+	v = DIV_ROUND_UP_ULL(fs_scl_low * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_LCNT_1_ADDR,
+			(v >> 8) & 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR,
+			v & 0xff, 7, 0);
+
+	/* SDA Hold Time */
+	v = DIV_ROUND_UP_ULL(sda_hold * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SDA_HOLD_ADDR, v & 0xff, 7, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SLAVE, 0x50, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SEGADDR, 0x30, 6, 0);
+
+	/* NACK_POL to high */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 7, 7);
+
+	/* NACK_MASK to unmasked */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x0, 6, 6);
+
+	/* ARBITRATION_POL to high */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 3, 3);
+
+	/* ARBITRATION_MASK to unmasked */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x0, 2, 2);
+
+	/* DONE_POL to high */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 3, 3);
+
+	/* DONE_MASK to unmasked */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x0, 2, 2);
+}
+
+void hdmi5_core_ddc_uninit(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+
+	/* Mask I2C interrupts */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 6, 6);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 2, 2);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 2, 2);
+}
+
+int hdmi5_core_ddc_read(void *data, u8 *buf, unsigned int block, size_t len)
+{
+	struct hdmi_core_data *core = data;
+	void __iomem *base = core->base;
+	u8 cur_addr;
+	const int retries = 1000;
+	u8 seg_ptr = block / 2;
+	u8 edidbase = ((block % 2) * EDID_LENGTH);
+
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SEGPTR, seg_ptr, 7, 0);
+
+	/*
+	 * TODO: We use polling here, although we probably should use proper
+	 * interrupts.
+	 */
+	for (cur_addr = 0; cur_addr < len; ++cur_addr) {
+		int i;
+
+		/* clear ERROR and DONE */
+		REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0x3, 1, 0);
+
+		REG_FLD_MOD(base, HDMI_CORE_I2CM_ADDRESS,
+				edidbase + cur_addr, 7, 0);
+
+		if (seg_ptr)
+			REG_FLD_MOD(base, HDMI_CORE_I2CM_OPERATION, 1, 1, 1);
+		else
+			REG_FLD_MOD(base, HDMI_CORE_I2CM_OPERATION, 1, 0, 0);
+
+		for (i = 0; i < retries; ++i) {
+			u32 stat;
+
+			stat = REG_GET(base, HDMI_CORE_IH_I2CM_STAT0, 1, 0);
+
+			/* I2CM_ERROR */
+			if (stat & 1) {
+				DSSERR("HDMI I2C Master Error\n");
+				return -EIO;
+			}
+
+			/* I2CM_DONE */
+			if (stat & (1 << 1))
+				break;
+
+			usleep_range(250, 1000);
+		}
+
+		if (i == retries) {
+			DSSERR("HDMI I2C timeout reading EDID\n");
+			return -EIO;
+		}
+
+		buf[cur_addr] = REG_GET(base, HDMI_CORE_I2CM_DATAI, 7, 0);
+	}
+
+	return 0;
+
+}
+
+void hdmi5_core_dump(struct hdmi_core_data *core, struct seq_file *s)
+{
+
+#define DUMPCORE(r) seq_printf(s, "%-35s %08x\n", #r,\
+		hdmi_read_reg(core->base, r))
+
+	DUMPCORE(HDMI_CORE_FC_INVIDCONF);
+	DUMPCORE(HDMI_CORE_FC_INHACTIV0);
+	DUMPCORE(HDMI_CORE_FC_INHACTIV1);
+	DUMPCORE(HDMI_CORE_FC_INHBLANK0);
+	DUMPCORE(HDMI_CORE_FC_INHBLANK1);
+	DUMPCORE(HDMI_CORE_FC_INVACTIV0);
+	DUMPCORE(HDMI_CORE_FC_INVACTIV1);
+	DUMPCORE(HDMI_CORE_FC_INVBLANK);
+	DUMPCORE(HDMI_CORE_FC_HSYNCINDELAY0);
+	DUMPCORE(HDMI_CORE_FC_HSYNCINDELAY1);
+	DUMPCORE(HDMI_CORE_FC_HSYNCINWIDTH0);
+	DUMPCORE(HDMI_CORE_FC_HSYNCINWIDTH1);
+	DUMPCORE(HDMI_CORE_FC_VSYNCINDELAY);
+	DUMPCORE(HDMI_CORE_FC_VSYNCINWIDTH);
+	DUMPCORE(HDMI_CORE_FC_CTRLDUR);
+	DUMPCORE(HDMI_CORE_FC_EXCTRLDUR);
+	DUMPCORE(HDMI_CORE_FC_EXCTRLSPAC);
+	DUMPCORE(HDMI_CORE_FC_CH0PREAM);
+	DUMPCORE(HDMI_CORE_FC_CH1PREAM);
+	DUMPCORE(HDMI_CORE_FC_CH2PREAM);
+	DUMPCORE(HDMI_CORE_FC_AVICONF0);
+	DUMPCORE(HDMI_CORE_FC_AVICONF1);
+	DUMPCORE(HDMI_CORE_FC_AVICONF2);
+	DUMPCORE(HDMI_CORE_FC_AVIVID);
+	DUMPCORE(HDMI_CORE_FC_PRCONF);
+
+	DUMPCORE(HDMI_CORE_MC_CLKDIS);
+	DUMPCORE(HDMI_CORE_MC_SWRSTZREQ);
+	DUMPCORE(HDMI_CORE_MC_FLOWCTRL);
+	DUMPCORE(HDMI_CORE_MC_PHYRSTZ);
+	DUMPCORE(HDMI_CORE_MC_LOCKONCLOCK);
+
+	DUMPCORE(HDMI_CORE_I2CM_SLAVE);
+	DUMPCORE(HDMI_CORE_I2CM_ADDRESS);
+	DUMPCORE(HDMI_CORE_I2CM_DATAO);
+	DUMPCORE(HDMI_CORE_I2CM_DATAI);
+	DUMPCORE(HDMI_CORE_I2CM_OPERATION);
+	DUMPCORE(HDMI_CORE_I2CM_INT);
+	DUMPCORE(HDMI_CORE_I2CM_CTLINT);
+	DUMPCORE(HDMI_CORE_I2CM_DIV);
+	DUMPCORE(HDMI_CORE_I2CM_SEGADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SOFTRSTZ);
+	DUMPCORE(HDMI_CORE_I2CM_SEGPTR);
+	DUMPCORE(HDMI_CORE_I2CM_SS_SCL_HCNT_1_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SS_SCL_HCNT_0_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SS_SCL_LCNT_1_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SS_SCL_LCNT_0_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_HCNT_1_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_HCNT_0_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_LCNT_1_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SDA_HOLD_ADDR);
+}
+
+static void hdmi_core_init(struct hdmi_core_vid_config *video_cfg,
+			   const struct hdmi_config *cfg)
+{
+	DSSDBG("hdmi_core_init\n");
+
+	video_cfg->v_fc_config.vm = cfg->vm;
+
+	/* video core */
+	video_cfg->data_enable_pol = 1; /* It is always 1*/
+	video_cfg->hblank = cfg->vm.hfront_porch +
+			    cfg->vm.hback_porch + cfg->vm.hsync_len;
+	video_cfg->vblank_osc = 0;
+	video_cfg->vblank = cfg->vm.vsync_len + cfg->vm.vfront_porch +
+			    cfg->vm.vback_porch;
+	video_cfg->v_fc_config.hdmi_dvi_mode = cfg->hdmi_dvi_mode;
+
+	if (cfg->vm.flags & DISPLAY_FLAGS_INTERLACED) {
+		/* set vblank_osc if vblank is fractional */
+		if (video_cfg->vblank % 2 != 0)
+			video_cfg->vblank_osc = 1;
+
+		video_cfg->v_fc_config.vm.vactive /= 2;
+		video_cfg->vblank /= 2;
+		video_cfg->v_fc_config.vm.vfront_porch /= 2;
+		video_cfg->v_fc_config.vm.vsync_len /= 2;
+		video_cfg->v_fc_config.vm.vback_porch /= 2;
+	}
+
+	if (cfg->vm.flags & DISPLAY_FLAGS_DOUBLECLK) {
+		video_cfg->v_fc_config.vm.hactive *= 2;
+		video_cfg->hblank *= 2;
+		video_cfg->v_fc_config.vm.hfront_porch *= 2;
+		video_cfg->v_fc_config.vm.hsync_len *= 2;
+		video_cfg->v_fc_config.vm.hback_porch *= 2;
+	}
+}
+
+/* DSS_HDMI_CORE_VIDEO_CONFIG */
+static void hdmi_core_video_config(struct hdmi_core_data *core,
+			const struct hdmi_core_vid_config *cfg)
+{
+	void __iomem *base = core->base;
+	const struct videomode *vm = &cfg->v_fc_config.vm;
+	unsigned char r = 0;
+	bool vsync_pol, hsync_pol;
+
+	vsync_pol = !!(vm->flags & DISPLAY_FLAGS_VSYNC_HIGH);
+	hsync_pol = !!(vm->flags & DISPLAY_FLAGS_HSYNC_HIGH);
+
+	/* Set hsync, vsync and data-enable polarity  */
+	r = hdmi_read_reg(base, HDMI_CORE_FC_INVIDCONF);
+	r = FLD_MOD(r, vsync_pol, 6, 6);
+	r = FLD_MOD(r, hsync_pol, 5, 5);
+	r = FLD_MOD(r, cfg->data_enable_pol, 4, 4);
+	r = FLD_MOD(r, cfg->vblank_osc, 1, 1);
+	r = FLD_MOD(r, !!(vm->flags & DISPLAY_FLAGS_INTERLACED), 0, 0);
+	hdmi_write_reg(base, HDMI_CORE_FC_INVIDCONF, r);
+
+	/* set x resolution */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INHACTIV1, vm->hactive >> 8, 4, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_INHACTIV0, vm->hactive & 0xFF, 7, 0);
+
+	/* set y resolution */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INVACTIV1, vm->vactive >> 8, 4, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_INVACTIV0, vm->vactive & 0xFF, 7, 0);
+
+	/* set horizontal blanking pixels */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INHBLANK1, cfg->hblank >> 8, 4, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_INHBLANK0, cfg->hblank & 0xFF, 7, 0);
+
+	/* set vertial blanking pixels */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INVBLANK, cfg->vblank, 7, 0);
+
+	/* set horizontal sync offset */
+	REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINDELAY1, vm->hfront_porch >> 8,
+		    4, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINDELAY0, vm->hfront_porch & 0xFF,
+		    7, 0);
+
+	/* set vertical sync offset */
+	REG_FLD_MOD(base, HDMI_CORE_FC_VSYNCINDELAY, vm->vfront_porch, 7, 0);
+
+	/* set horizontal sync pulse width */
+	REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINWIDTH1, (vm->hsync_len >> 8),
+		    1, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINWIDTH0, vm->hsync_len & 0xFF,
+		    7, 0);
+
+	/*  set vertical sync pulse width */
+	REG_FLD_MOD(base, HDMI_CORE_FC_VSYNCINWIDTH, vm->vsync_len, 5, 0);
+
+	/* select DVI mode */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INVIDCONF,
+		    cfg->v_fc_config.hdmi_dvi_mode, 3, 3);
+
+	if (vm->flags & DISPLAY_FLAGS_DOUBLECLK)
+		REG_FLD_MOD(base, HDMI_CORE_FC_PRCONF, 2, 7, 4);
+	else
+		REG_FLD_MOD(base, HDMI_CORE_FC_PRCONF, 1, 7, 4);
+}
+
+static void hdmi_core_config_video_packetizer(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+	int clr_depth = 0;	/* 24 bit color depth */
+
+	/* COLOR_DEPTH */
+	REG_FLD_MOD(base, HDMI_CORE_VP_PR_CD, clr_depth, 7, 4);
+	/* BYPASS_EN */
+	REG_FLD_MOD(base, HDMI_CORE_VP_CONF, clr_depth ? 0 : 1, 6, 6);
+	/* PP_EN */
+	REG_FLD_MOD(base, HDMI_CORE_VP_CONF, clr_depth ? 1 : 0, 5, 5);
+	/* YCC422_EN */
+	REG_FLD_MOD(base, HDMI_CORE_VP_CONF, 0, 3, 3);
+	/* PP_STUFFING */
+	REG_FLD_MOD(base, HDMI_CORE_VP_STUFF, clr_depth ? 1 : 0, 1, 1);
+	/* YCC422_STUFFING */
+	REG_FLD_MOD(base, HDMI_CORE_VP_STUFF, 1, 2, 2);
+	/* OUTPUT_SELECTOR */
+	REG_FLD_MOD(base, HDMI_CORE_VP_CONF, clr_depth ? 0 : 2, 1, 0);
+}
+
+static void hdmi_core_config_video_sampler(struct hdmi_core_data *core)
+{
+	int video_mapping = 1;	/* for 24 bit color depth */
+
+	/* VIDEO_MAPPING */
+	REG_FLD_MOD(core->base, HDMI_CORE_TX_INVID0, video_mapping, 4, 0);
+}
+
+static void hdmi_core_write_avi_infoframe(struct hdmi_core_data *core,
+	struct hdmi_avi_infoframe *frame)
+{
+	void __iomem *base = core->base;
+	u8 data[HDMI_INFOFRAME_SIZE(AVI)];
+	u8 *ptr;
+	unsigned int y, a, b, s;
+	unsigned int c, m, r;
+	unsigned int itc, ec, q, sc;
+	unsigned int vic;
+	unsigned int yq, cn, pr;
+
+	hdmi_avi_infoframe_pack(frame, data, sizeof(data));
+
+	print_hex_dump_debug("AVI: ", DUMP_PREFIX_NONE, 16, 1, data,
+		HDMI_INFOFRAME_SIZE(AVI), false);
+
+	ptr = data + HDMI_INFOFRAME_HEADER_SIZE;
+
+	y = (ptr[0] >> 5) & 0x3;
+	a = (ptr[0] >> 4) & 0x1;
+	b = (ptr[0] >> 2) & 0x3;
+	s = (ptr[0] >> 0) & 0x3;
+
+	c = (ptr[1] >> 6) & 0x3;
+	m = (ptr[1] >> 4) & 0x3;
+	r = (ptr[1] >> 0) & 0xf;
+
+	itc = (ptr[2] >> 7) & 0x1;
+	ec = (ptr[2] >> 4) & 0x7;
+	q = (ptr[2] >> 2) & 0x3;
+	sc = (ptr[2] >> 0) & 0x3;
+
+	vic = ptr[3];
+
+	yq = (ptr[4] >> 6) & 0x3;
+	cn = (ptr[4] >> 4) & 0x3;
+	pr = (ptr[4] >> 0) & 0xf;
+
+	hdmi_write_reg(base, HDMI_CORE_FC_AVICONF0,
+		(a << 6) | (s << 4) | (b << 2) | (y << 0));
+
+	hdmi_write_reg(base, HDMI_CORE_FC_AVICONF1,
+		(c << 6) | (m << 4) | (r << 0));
+
+	hdmi_write_reg(base, HDMI_CORE_FC_AVICONF2,
+		(itc << 7) | (ec << 4) | (q << 2) | (sc << 0));
+
+	hdmi_write_reg(base, HDMI_CORE_FC_AVIVID, vic);
+
+	hdmi_write_reg(base, HDMI_CORE_FC_AVICONF3,
+		(yq << 2) | (cn << 0));
+
+	REG_FLD_MOD(base, HDMI_CORE_FC_PRCONF, pr, 3, 0);
+}
+
+static void hdmi_core_write_csc(struct hdmi_core_data *core,
+		const struct csc_table *csc_coeff)
+{
+	void __iomem *base = core->base;
+
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A1_MSB, csc_coeff->a1 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A1_LSB, csc_coeff->a1, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A2_MSB, csc_coeff->a2 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A2_LSB, csc_coeff->a2, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A3_MSB, csc_coeff->a3 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A3_LSB, csc_coeff->a3, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A4_MSB, csc_coeff->a4 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A4_LSB, csc_coeff->a4, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B1_MSB, csc_coeff->b1 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B1_LSB, csc_coeff->b1, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B2_MSB, csc_coeff->b2 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B2_LSB, csc_coeff->b2, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B3_MSB, csc_coeff->b3 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B3_LSB, csc_coeff->b3, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B4_MSB, csc_coeff->b4 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B4_LSB, csc_coeff->b4, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C1_MSB, csc_coeff->c1 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C1_LSB, csc_coeff->c1, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C2_MSB, csc_coeff->c2 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C2_LSB, csc_coeff->c2, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C3_MSB, csc_coeff->c3 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C3_LSB, csc_coeff->c3, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C4_MSB, csc_coeff->c4 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C4_LSB, csc_coeff->c4, 7, 0);
+
+	/* enable CSC */
+	REG_FLD_MOD(base, HDMI_CORE_MC_FLOWCTRL, 0x1, 0, 0);
+}
+
+static void hdmi_core_configure_range(struct hdmi_core_data *core,
+				      enum hdmi_quantization_range range)
+{
+	static const struct csc_table csc_limited_range = {
+		7036, 0, 0, 32, 0, 7036, 0, 32, 0, 0, 7036, 32
+	};
+	static const struct csc_table csc_full_range = {
+		8192, 0, 0, 0, 0, 8192, 0, 0, 0, 0, 8192, 0
+	};
+	const struct csc_table *csc_coeff;
+
+	/* CSC_COLORDEPTH  = 24 bits*/
+	REG_FLD_MOD(core->base, HDMI_CORE_CSC_SCALE, 0, 7, 4);
+
+	switch (range) {
+	case HDMI_QUANTIZATION_RANGE_FULL:
+		csc_coeff = &csc_full_range;
+		break;
+
+	case HDMI_QUANTIZATION_RANGE_DEFAULT:
+	case HDMI_QUANTIZATION_RANGE_LIMITED:
+	default:
+		csc_coeff = &csc_limited_range;
+		break;
+	}
+
+	hdmi_core_write_csc(core, csc_coeff);
+}
+
+static void hdmi_core_enable_video_path(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+
+	DSSDBG("hdmi_core_enable_video_path\n");
+
+	REG_FLD_MOD(base, HDMI_CORE_FC_CTRLDUR, 0x0C, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_EXCTRLDUR, 0x20, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_EXCTRLSPAC, 0x01, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_CH0PREAM, 0x0B, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_CH1PREAM, 0x16, 5, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_CH2PREAM, 0x21, 5, 0);
+	REG_FLD_MOD(base, HDMI_CORE_MC_CLKDIS, 0x00, 0, 0);
+	REG_FLD_MOD(base, HDMI_CORE_MC_CLKDIS, 0x00, 1, 1);
+}
+
+static void hdmi_core_mask_interrupts(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+
+	/* Master IRQ mask */
+	REG_FLD_MOD(base, HDMI_CORE_IH_MUTE, 0x3, 1, 0);
+
+	/* Mask all the interrupts in HDMI core */
+
+	REG_FLD_MOD(base, HDMI_CORE_VP_MASK, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_MASK0, 0xe7, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_MASK1, 0xfb, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_MASK2, 0x3, 1, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_AUD_INT, 0x3, 3, 2);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_MASK, 0x3, 1, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_CEC_MASK, 0x7f, 6, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 6, 6);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 2, 2);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 2, 2);
+
+	REG_FLD_MOD(base, HDMI_CORE_PHY_MASK0, 0xf3, 7, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
+
+	/* Clear all the current interrupt bits */
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_VP_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT0, 0xe7, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT1, 0xfb, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT2, 0x3, 1, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_AS_STAT0, 0x7, 2, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_CEC_STAT0, 0x7f, 6, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0x3, 1, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
+}
+
+static void hdmi_core_enable_interrupts(struct hdmi_core_data *core)
+{
+	/* Unmute interrupts */
+	REG_FLD_MOD(core->base, HDMI_CORE_IH_MUTE, 0x0, 1, 0);
+}
+
+int hdmi5_core_handle_irqs(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT1, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT2, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_AS_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_CEC_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_VP_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_I2CMPHY_STAT0, 0xff, 7, 0);
+
+	return 0;
+}
+
+void hdmi5_configure(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+		struct hdmi_config *cfg)
+{
+	struct videomode vm;
+	struct hdmi_video_format video_format;
+	struct hdmi_core_vid_config v_core_cfg;
+	enum hdmi_quantization_range range;
+
+	hdmi_core_mask_interrupts(core);
+
+	if (cfg->hdmi_dvi_mode == HDMI_HDMI) {
+		char vic = cfg->infoframe.video_code;
+
+		/* All CEA modes other than VIC 1 use limited quantization range. */
+		range = vic > 1 ? HDMI_QUANTIZATION_RANGE_LIMITED :
+			HDMI_QUANTIZATION_RANGE_FULL;
+	} else {
+		range = HDMI_QUANTIZATION_RANGE_FULL;
+	}
+
+	hdmi_core_init(&v_core_cfg, cfg);
+
+	hdmi_wp_init_vid_fmt_timings(&video_format, &vm, cfg);
+
+	hdmi_wp_video_config_timing(wp, &vm);
+
+	/* video config */
+	video_format.packing_mode = HDMI_PACK_24b_RGB_YUV444_YUV422;
+
+	hdmi_wp_video_config_format(wp, &video_format);
+
+	hdmi_wp_video_config_interface(wp, &vm);
+
+	hdmi_core_configure_range(core, range);
+	cfg->infoframe.quantization_range = range;
+
+	/*
+	 * configure core video part, set software reset in the core
+	 */
+	v_core_cfg.packet_mode = HDMI_PACKETMODE24BITPERPIXEL;
+
+	hdmi_core_video_config(core, &v_core_cfg);
+
+	hdmi_core_config_video_packetizer(core);
+	hdmi_core_config_video_sampler(core);
+
+	if (cfg->hdmi_dvi_mode == HDMI_HDMI)
+		hdmi_core_write_avi_infoframe(core, &cfg->infoframe);
+
+	hdmi_core_enable_video_path(core);
+
+	hdmi_core_enable_interrupts(core);
+}
+
+static void hdmi5_core_audio_config(struct hdmi_core_data *core,
+			struct hdmi_core_audio_config *cfg)
+{
+	void __iomem *base = core->base;
+	u8 val;
+
+	/* Mute audio before configuring */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 0xf, 7, 4);
+
+	/* Set the N parameter */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_N1, cfg->n, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_N2, cfg->n >> 8, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_N3, cfg->n >> 16, 3, 0);
+
+	/*
+	 * CTS manual mode. Automatic mode is not supported when using audio
+	 * parallel interface.
+	 */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_CTS3, 1, 4, 4);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_CTS1, cfg->cts, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_CTS2, cfg->cts >> 8, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_CTS3, cfg->cts >> 16, 3, 0);
+
+	/* Layout of Audio Sample Packets: 2-channel or multichannels */
+	if (cfg->layout == HDMI_AUDIO_LAYOUT_2CH)
+		REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 0, 0, 0);
+	else
+		REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 1, 0, 0);
+
+	/* Configure IEC-609580 Validity bits */
+	/* Channel 0 is valid */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, 0, 0, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, 0, 4, 4);
+
+	if (cfg->layout == HDMI_AUDIO_LAYOUT_2CH)
+		val = 1;
+	else
+		val = 0;
+
+	/* Channels 1, 2 setting */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 1, 1);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 5, 5);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 2, 2);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 6, 6);
+	/* Channel 3 setting */
+	if (cfg->layout == HDMI_AUDIO_LAYOUT_6CH)
+		val = 1;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 3, 3);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 7, 7);
+
+	/* Configure IEC-60958 User bits */
+	/* TODO: should be set by user. */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSU, 0, 7, 0);
+
+	/* Configure IEC-60958 Channel Status word */
+	/* CGMSA */
+	val = cfg->iec60958_cfg->status[5] & IEC958_AES5_CON_CGMSA;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(0), val, 5, 4);
+
+	/* Copyright */
+	val = (cfg->iec60958_cfg->status[0] &
+			IEC958_AES0_CON_NOT_COPYRIGHT) >> 2;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(0), val, 0, 0);
+
+	/* Category */
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDSCHNLS(1),
+		cfg->iec60958_cfg->status[1]);
+
+	/* PCM audio mode */
+	val = (cfg->iec60958_cfg->status[0] & IEC958_AES0_CON_MODE) >> 6;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(2), val, 6, 4);
+
+	/* Source number */
+	val = cfg->iec60958_cfg->status[2] & IEC958_AES2_CON_SOURCE;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(2), val, 3, 0);
+
+	/* Channel number right 0  */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(3), 2, 3, 0);
+	/* Channel number right 1*/
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(3), 4, 7, 4);
+	/* Channel number right 2  */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(4), 6, 3, 0);
+	/* Channel number right 3*/
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(4), 8, 7, 4);
+	/* Channel number left 0  */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(5), 1, 3, 0);
+	/* Channel number left 1*/
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(5), 3, 7, 4);
+	/* Channel number left 2  */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(6), 5, 3, 0);
+	/* Channel number left 3*/
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(6), 7, 7, 4);
+
+	/* Clock accuracy and sample rate */
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDSCHNLS(7),
+		cfg->iec60958_cfg->status[3]);
+
+	/* Original sample rate and word length */
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDSCHNLS(8),
+		cfg->iec60958_cfg->status[4]);
+
+	/* Enable FIFO empty and full interrupts */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_INT, 3, 3, 2);
+
+	/* Configure GPA */
+	/* select HBR/SPDIF interfaces */
+	if (cfg->layout == HDMI_AUDIO_LAYOUT_2CH) {
+		/* select HBR/SPDIF interfaces */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_CONF0, 0, 5, 5);
+		/* enable two channels in GPA */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF1, 3, 7, 0);
+	} else if (cfg->layout == HDMI_AUDIO_LAYOUT_6CH) {
+		/* select HBR/SPDIF interfaces */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_CONF0, 0, 5, 5);
+		/* enable six channels in GPA */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF1, 0x3F, 7, 0);
+	} else {
+		/* select HBR/SPDIF interfaces */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_CONF0, 0, 5, 5);
+		/* enable eight channels in GPA */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF1, 0xFF, 7, 0);
+	}
+
+	/* disable HBR */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF2, 0, 0, 0);
+	/* enable PCUV */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF2, 1, 1, 1);
+	/* enable GPA FIFO full and empty mask */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_MASK, 3, 1, 0);
+	/* set polarity of GPA FIFO empty interrupts */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_POL, 1, 0, 0);
+
+	/* unmute audio */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 0, 7, 4);
+}
+
+static void hdmi5_core_audio_infoframe_cfg(struct hdmi_core_data *core,
+	 struct snd_cea_861_aud_if *info_aud)
+{
+	void __iomem *base = core->base;
+
+	/* channel count and coding type fields in AUDICONF0 are swapped */
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF0,
+		(info_aud->db1_ct_cc & CEA861_AUDIO_INFOFRAME_DB1CC) << 4 |
+		(info_aud->db1_ct_cc & CEA861_AUDIO_INFOFRAME_DB1CT) >> 4);
+
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF1, info_aud->db2_sf_ss);
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF2, info_aud->db4_ca);
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF3,
+	  (info_aud->db5_dminh_lsv & CEA861_AUDIO_INFOFRAME_DB5_DM_INH) >> 3 |
+	  (info_aud->db5_dminh_lsv & CEA861_AUDIO_INFOFRAME_DB5_LSV));
+}
+
+int hdmi5_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+			struct omap_dss_audio *audio, u32 pclk)
+{
+	struct hdmi_audio_format audio_format;
+	struct hdmi_audio_dma audio_dma;
+	struct hdmi_core_audio_config core_cfg;
+	int n, cts, channel_count;
+	unsigned int fs_nr;
+	bool word_length_16b = false;
+
+	if (!audio || !audio->iec || !audio->cea || !core)
+		return -EINVAL;
+
+	core_cfg.iec60958_cfg = audio->iec;
+
+	if (!(audio->iec->status[4] & IEC958_AES4_CON_MAX_WORDLEN_24) &&
+		(audio->iec->status[4] & IEC958_AES4_CON_WORDLEN_20_16))
+			word_length_16b = true;
+
+	/* only 16-bit word length supported atm */
+	if (!word_length_16b)
+		return -EINVAL;
+
+	switch (audio->iec->status[3] & IEC958_AES3_CON_FS) {
+	case IEC958_AES3_CON_FS_32000:
+		fs_nr = 32000;
+		break;
+	case IEC958_AES3_CON_FS_44100:
+		fs_nr = 44100;
+		break;
+	case IEC958_AES3_CON_FS_48000:
+		fs_nr = 48000;
+		break;
+	case IEC958_AES3_CON_FS_88200:
+		fs_nr = 88200;
+		break;
+	case IEC958_AES3_CON_FS_96000:
+		fs_nr = 96000;
+		break;
+	case IEC958_AES3_CON_FS_176400:
+		fs_nr = 176400;
+		break;
+	case IEC958_AES3_CON_FS_192000:
+		fs_nr = 192000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	hdmi_compute_acr(pclk, fs_nr, &n, &cts);
+	core_cfg.n = n;
+	core_cfg.cts = cts;
+
+	/* Audio channels settings */
+	channel_count = (audio->cea->db1_ct_cc & CEA861_AUDIO_INFOFRAME_DB1CC)
+				+ 1;
+
+	if (channel_count == 2)
+		core_cfg.layout = HDMI_AUDIO_LAYOUT_2CH;
+	else if (channel_count == 6)
+		core_cfg.layout = HDMI_AUDIO_LAYOUT_6CH;
+	else
+		core_cfg.layout = HDMI_AUDIO_LAYOUT_8CH;
+
+	/* DMA settings */
+	if (word_length_16b)
+		audio_dma.transfer_size = 0x10;
+	else
+		audio_dma.transfer_size = 0x20;
+	audio_dma.block_size = 0xC0;
+	audio_dma.mode = HDMI_AUDIO_TRANSF_DMA;
+	audio_dma.fifo_threshold = 0x20; /* in number of samples */
+
+	/* audio FIFO format settings for 16-bit samples*/
+	audio_format.samples_per_word = HDMI_AUDIO_ONEWORD_TWOSAMPLES;
+	audio_format.sample_size = HDMI_AUDIO_SAMPLE_16BITS;
+	audio_format.justification = HDMI_AUDIO_JUSTIFY_LEFT;
+	audio_format.sample_order = HDMI_AUDIO_SAMPLE_LEFT_FIRST;
+
+	/* only LPCM atm */
+	audio_format.type = HDMI_AUDIO_TYPE_LPCM;
+
+	/* only allowed option */
+	audio_format.sample_order = HDMI_AUDIO_SAMPLE_LEFT_FIRST;
+
+	/* disable start/stop signals of IEC 60958 blocks */
+	audio_format.en_sig_blk_strt_end = HDMI_AUDIO_BLOCK_SIG_STARTEND_ON;
+
+	/* configure DMA and audio FIFO format*/
+	hdmi_wp_audio_config_dma(wp, &audio_dma);
+	hdmi_wp_audio_config_format(wp, &audio_format);
+
+	/* configure the core */
+	hdmi5_core_audio_config(core, &core_cfg);
+
+	/* configure CEA 861 audio infoframe */
+	hdmi5_core_audio_infoframe_cfg(core, audio->cea);
+
+	return 0;
+}
+
+int hdmi5_core_init(struct platform_device *pdev, struct hdmi_core_data *core)
+{
+	core->base = devm_platform_ioremap_resource_byname(pdev, "core");
+	if (IS_ERR(core->base))
+		return PTR_ERR(core->base);
+
+	return 0;
+}