Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 739 insertions, 0 deletions

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
new file mode 100644
index 000000000..737edcdf9
--- /dev/null
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -0,0 +1,739 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config DRM_PANEL
+	bool
+	depends on DRM
+	help
+	  Panel registration and lookup framework.
+
+menu "Display Panels"
+	depends on DRM && DRM_PANEL
+
+config DRM_PANEL_ABT_Y030XX067A
+	tristate "ABT Y030XX067A 320x480 LCD panel"
+	depends on OF && SPI
+	select REGMAP_SPI
+	help
+	  Say Y here to enable support for the Asia Better Technology Ltd.
+	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
+	  and RG-99 handheld gaming consoles.
+
+config DRM_PANEL_ARM_VERSATILE
+	tristate "ARM Versatile panel driver"
+	depends on OF
+	depends on MFD_SYSCON
+	select VIDEOMODE_HELPERS
+	help
+	  This driver supports the ARM Versatile panels connected to ARM
+	  reference designs. The panel is detected using special registers
+	  in the Versatile family syscon registers.
+
+config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
+	tristate "ASUS Z00T TM5P5 NT35596 panel"
+	depends on GPIOLIB && OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the ASUS TMP5P5
+	  NT35596 1080x1920 video mode panel as found in some Asus
+	  Zenfone 2 Laser Z00T devices.
+
+config DRM_PANEL_BOE_BF060Y8M_AJ0
+	tristate "Boe BF060Y8M-AJ0 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
+	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
+	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host and backlight is controlled through DSI commands.
+
+config DRM_PANEL_BOE_HIMAX8279D
+	tristate "Boe Himax8279d panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Boe Himax8279d
+	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
+config DRM_PANEL_BOE_TV101WUM_NL6
+	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
+	  45NA WUXGA PANEL DSI Video Mode panel
+
+config DRM_PANEL_DSI_CM
+	tristate "Generic DSI command mode panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  DRM panel driver for DSI command mode panels with support for
+	  embedded and external backlights.
+
+config DRM_PANEL_LVDS
+	tristate "Generic LVDS panel driver"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  This driver supports LVDS panels that don't require device-specific
+	  handling of power supplies or control signals. It implements automatic
+	  backlight handling if the panel is attached to a backlight controller.
+
+config DRM_PANEL_SIMPLE
+	tristate "support for simple panels (other than eDP ones)"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select VIDEOMODE_HELPERS
+	help
+	  DRM panel driver for dumb non-eDP panels that need at most a regulator
+	  and a GPIO to be powered up. Optionally a backlight can be attached so
+	  that it can be automatically turned off when the panel goes into a
+	  low power state.
+
+config DRM_PANEL_EDP
+	tristate "support for simple Embedded DisplayPort panels"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select VIDEOMODE_HELPERS
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_DP_AUX_BUS
+	select DRM_KMS_HELPER
+	help
+	  DRM panel driver for dumb eDP panels that need at most a regulator and
+	  a GPIO to be powered up. Optionally a backlight can be attached so
+	  that it can be automatically turned off when the panel goes into a
+	  low power state.
+
+config DRM_PANEL_EBBG_FT8719
+	tristate "EBBG FT8719 panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the EBBG FT8719
+	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
+	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
+	  interface to the host.
+
+config DRM_PANEL_ELIDA_KD35T133
+	tristate "Elida KD35T133 panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Elida
+	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
+	  system interfaces.
+
+config DRM_PANEL_FEIXIN_K101_IM2BA02
+	tristate "Feixin K101 IM2BA02 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
+	  4-lane 800x1280 MIPI DSI panel.
+
+config DRM_PANEL_FEIYANG_FY07024DI26A30D
+	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y if you want to enable support for panels based on the
+	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
+
+config DRM_PANEL_ILITEK_IL9322
+	tristate "Ilitek ILI9322 320x240 QVGA panels"
+	depends on OF && SPI
+	select REGMAP
+	help
+	  Say Y here if you want to enable support for Ilitek IL9322
+	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
+
+config DRM_PANEL_ILITEK_ILI9341
+	tristate "Ilitek ILI9341 240x320 QVGA panels"
+	depends on OF && SPI
+	select DRM_KMS_HELPER
+	select DRM_GEM_DMA_HELPER
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_MIPI_DBI
+	help
+	  Say Y here if you want to enable support for Ilitek IL9341
+	  QVGA (240x320) RGB panels. support serial & parallel rgb
+	  interface.
+
+config DRM_PANEL_ILITEK_ILI9881C
+	tristate "Ilitek ILI9881C-based panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y if you want to enable support for panels based on the
+	  Ilitek ILI9881c controller.
+
+config DRM_PANEL_INNOLUX_EJ030NA
+        tristate "Innolux EJ030NA 320x480 LCD panel"
+        depends on OF && SPI
+        select REGMAP_SPI
+        help
+          Say Y here to enable support for the Innolux/Chimei EJ030NA
+          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
+          and LDK handheld gaming consoles.
+
+config DRM_PANEL_INNOLUX_P079ZCA
+	tristate "Innolux P079ZCA panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Innolux P079ZCA
+	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
+config DRM_PANEL_JADARD_JD9365DA_H3
+	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Jadard JD9365DA-H3
+	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
+	  800RGBx1280 dots at maximum.
+
+config DRM_PANEL_JDI_LT070ME05000
+	tristate "JDI LT070ME05000 WUXGA DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for JDI DSI video mode
+	  panel as found in Google Nexus 7 (2013) devices.
+	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
+	  24 bit per pixel.
+
+config DRM_PANEL_JDI_R63452
+	tristate "JDI R63452 Full HD DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the JDI R63452
+	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
+
+config DRM_PANEL_KHADAS_TS050
+	tristate "Khadas TS050 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
+	  panel module. The panel has a 1080x1920 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host, a built-in LED backlight and touch controller.
+
+config DRM_PANEL_KINGDISPLAY_KD097D04
+	tristate "Kingdisplay kd097d04 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Kingdisplay kd097d04
+	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
+config DRM_PANEL_LEADTEK_LTK050H3146W
+	tristate "Leadtek LTK050H3146W panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Leadtek LTK050H3146W
+	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
+config DRM_PANEL_LEADTEK_LTK500HD1829
+	tristate "Leadtek LTK500HD1829 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Kingdisplay kd097d04
+	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
+config DRM_PANEL_SAMSUNG_LD9040
+	tristate "Samsung LD9040 RGB/SPI panel"
+	depends on OF && SPI
+	select VIDEOMODE_HELPERS
+
+config DRM_PANEL_LG_LB035Q02
+	tristate "LG LB035Q024573 RGB panel"
+	depends on GPIOLIB && OF && SPI
+	help
+	  Say Y here if you want to enable support for the LB035Q02 RGB panel
+	  (found on the Gumstix Overo Palo35 board). To compile this driver as
+	  a module, choose M here.
+
+config DRM_PANEL_LG_LG4573
+	tristate "LG4573 RGB/SPI panel"
+	depends on OF && SPI
+	select VIDEOMODE_HELPERS
+	help
+	  Say Y here if you want to enable support for LG4573 RGB panel.
+	  To compile this driver as a module, choose M here.
+
+config DRM_PANEL_NEC_NL8048HL11
+	tristate "NEC NL8048HL11 RGB panel"
+	depends on GPIOLIB && OF && SPI
+	help
+	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
+	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
+	  as a module, choose M here.
+
+config DRM_PANEL_NEWVISION_NV3051D
+	tristate "NewVision NV3051D DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  This driver supports the NV3051D based panel found on the Anbernic
+	  RG353P and RG353V.
+
+config DRM_PANEL_NEWVISION_NV3052C
+	tristate "NewVision NV3052C RGB/SPI panel"
+	depends on OF && SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_MIPI_DBI
+	help
+	  Say Y here if you want to enable support for the panels built
+	  around the NewVision NV3052C display controller.
+
+config DRM_PANEL_NOVATEK_NT35510
+	tristate "Novatek NT35510 RGB panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the panels built
+	  around the Novatek NT35510 display controller, such as some
+	  Hydis panels.
+
+config DRM_PANEL_NOVATEK_NT35560
+	tristate "Novatek NT35560 DSI command mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  Say Y here if you want to enable the Novatek NT35560 display
+	  controller. This panel supports DSI in both command and video
+	  mode. This supports several panels such as Sony ACX424AKM and
+	  ACX424AKP.
+
+config DRM_PANEL_NOVATEK_NT35950
+	tristate "Novatek NT35950 DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the panels built
+	  around the Novatek NT35950 display controller, such as some
+	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
+	  mobile phones.
+
+config DRM_PANEL_NOVATEK_NT36672A
+	tristate "Novatek NT36672A DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the panels built
+	  around the Novatek NT36672A display controller, such as some
+	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
+
+config DRM_PANEL_NOVATEK_NT39016
+	tristate "Novatek NT39016 RGB/SPI panel"
+	depends on OF && SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select REGMAP_SPI
+	help
+	  Say Y here if you want to enable support for the panels built
+	  around the Novatek NT39016 display controller.
+
+config DRM_PANEL_MANTIX_MLAF057WE51
+	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Mantix
+	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+	  has a resolution of 720x1440 pixels, a built in backlight and touch
+	  controller.
+
+config DRM_PANEL_OLIMEX_LCD_OLINUXINO
+	tristate "Olimex LCD-OLinuXino panel"
+	depends on OF
+	depends on I2C
+	depends on BACKLIGHT_CLASS_DEVICE
+	select CRC32
+	help
+	  The panel is used with different sizes LCDs, from 480x272 to
+	  1280x800, and 24 bit per pixel.
+
+	  Say Y here if you want to enable support for Olimex Ltd.
+	  LCD-OLinuXino panel.
+
+config DRM_PANEL_ORISETECH_OTM8009A
+	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Orise Technology
+	  otm8009a 480x800 dsi 2dl panel.
+
+config DRM_PANEL_OSD_OSD101T2587_53TS
+	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for One Stop Displays
+	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
+
+config DRM_PANEL_PANASONIC_VVX10F034N00
+	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Panasonic VVX10F034N00
+	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
+	  Xperia Z2 tablets
+
+config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
+	tristate "Raspberry Pi 7-inch touchscreen panel"
+	depends on DRM_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for the Raspberry
+	  Pi 7" Touchscreen.  To compile this driver as a module,
+	  choose M here.
+
+config DRM_PANEL_RAYDIUM_RM67191
+	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Raydium RM67191 FHD
+	  (1080x1920) DSI panel.
+
+config DRM_PANEL_RAYDIUM_RM68200
+	tristate "Raydium RM68200 720x1280 DSI video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Raydium RM68200
+	  720x1280 DSI video mode panel.
+
+config DRM_PANEL_RONBO_RB070D30
+	tristate "Ronbo Electronics RB070D30 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Ronbo Electronics
+	  RB070D30 1024x600 DSI panel.
+
+config DRM_PANEL_SAMSUNG_ATNA33XC20
+	tristate "Samsung ATNA33XC20 eDP panel"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_DP_AUX_BUS
+	help
+	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
+	  be handled by the DRM_PANEL_SIMPLE driver because its power
+	  sequencing is non-standard.
+
+config DRM_PANEL_SAMSUNG_DB7430
+	tristate "Samsung DB7430-based DPI panels"
+	depends on OF && SPI && GPIOLIB
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_MIPI_DBI
+	help
+	  Say Y here if you want to enable support for the Samsung
+	  DB7430 DPI display controller used in such devices as the
+	  LMS397KF04 480x800 DPI panel.
+
+config DRM_PANEL_SAMSUNG_S6D16D0
+	tristate "Samsung S6D16D0 DSI video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
+config DRM_PANEL_SAMSUNG_S6D27A1
+	tristate "Samsung S6D27A1 DPI panel driver"
+	depends on OF && SPI && GPIOLIB
+	select DRM_MIPI_DBI
+	help
+	  Say Y here if you want to enable support for the Samsung
+	  S6D27A1 DPI 480x800 panel.
+
+	  This panel can be found in Samsung Galaxy Ace 2
+	  GT-I8160 mobile phone.
+
+config DRM_PANEL_SAMSUNG_S6E3HA2
+	tristate "Samsung S6E3HA2 DSI video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+
+config DRM_PANEL_SAMSUNG_S6E63J0X03
+	tristate "Samsung S6E63J0X03 DSI command mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+
+config DRM_PANEL_SAMSUNG_S6E63M0
+	tristate "Samsung S6E63M0 RGB panel"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Samsung S6E63M0
+	  AMOLED LCD panel. This panel can be accessed using SPI or
+	  DSI.
+
+config DRM_PANEL_SAMSUNG_S6E63M0_SPI
+	tristate "Samsung S6E63M0 RGB SPI interface"
+	depends on SPI
+	depends on DRM_PANEL_SAMSUNG_S6E63M0
+	default DRM_PANEL_SAMSUNG_S6E63M0
+	select DRM_MIPI_DBI
+	help
+	  Say Y here if you want to be able to access the Samsung
+	  S6E63M0 panel using SPI.
+
+config DRM_PANEL_SAMSUNG_S6E63M0_DSI
+	tristate "Samsung S6E63M0 RGB DSI interface"
+	depends on DRM_MIPI_DSI
+	depends on DRM_PANEL_SAMSUNG_S6E63M0
+	help
+	  Say Y here if you want to be able to access the Samsung
+	  S6E63M0 panel using DSI.
+
+config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
+	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
+	depends on OF
+	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
+config DRM_PANEL_SAMSUNG_S6E8AA0
+	tristate "Samsung S6E8AA0 DSI video mode panel"
+	depends on OF
+	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
+config DRM_PANEL_SAMSUNG_SOFEF00
+	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  Say Y or M here if you want to enable support for the Samsung AMOLED
+	  command mode panels found in the OnePlus 6/6T smartphones.
+
+	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
+
+config DRM_PANEL_SEIKO_43WVF1G
+	tristate "Seiko 43WVF1G panel"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  Say Y here if you want to enable support for the Seiko
+	  43WVF1G controller for 800x480 LCD panels
+
+config DRM_PANEL_SHARP_LQ101R1SX01
+	tristate "Sharp LQ101R1SX01 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Sharp LQ101R1SX01
+	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
+	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called panel-sharp-lq101r1sx01.
+
+config DRM_PANEL_SHARP_LS037V7DW01
+	tristate "Sharp LS037V7DW01 VGA LCD panel"
+	depends on GPIOLIB && OF && REGULATOR
+	help
+	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
+	  (480x640) LCD panel (found on the TI SDP3430 board).
+
+config DRM_PANEL_SHARP_LS043T1LE01
+	tristate "Sharp LS043T1LE01 qHD video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
+	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
+
+config DRM_PANEL_SHARP_LS060T1SX01
+	tristate "Sharp LS060T1SX01 FullHD video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
+	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
+	  Bundle.
+
+config DRM_PANEL_SITRONIX_ST7701
+	tristate "Sitronix ST7701 panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Sitronix
+	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
+	  system interfaces.
+
+config DRM_PANEL_SITRONIX_ST7703
+	tristate "Sitronix ST7703 based MIPI touchscreen panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Sitronix ST7703 based
+	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
+	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
+	  in backlight and touch controller.
+	  Touch input support is provided by the goodix driver and needs to be
+	  selected separately.
+
+config DRM_PANEL_SITRONIX_ST7789V
+	tristate "Sitronix ST7789V panel"
+	depends on OF && SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Sitronix
+	  ST7789V controller for 240x320 LCD panels
+
+config DRM_PANEL_SONY_ACX565AKM
+	tristate "Sony ACX565AKM panel"
+	depends on GPIOLIB && OF && SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Sony ACX565AKM
+	  800x600 3.5" panel (found on the Nokia N900).
+
+config DRM_PANEL_SONY_TULIP_TRULY_NT35521
+	tristate "Sony Tulip Truly NT35521 panel"
+	depends on GPIOLIB && OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Sony Tulip
+	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
+	  Aqua phone.
+
+config DRM_PANEL_TDO_TL070WSH30
+	tristate "TDO TL070WSH30 DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
+	  panel module. The panel has a 1024×600 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host, a built-in LED backlight and touch controller.
+
+config DRM_PANEL_TPO_TD028TTEC1
+	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
+	depends on OF && SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
+	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
+
+config DRM_PANEL_TPO_TD043MTEA1
+	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
+	depends on GPIOLIB && OF && REGULATOR && SPI
+	help
+	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
+	  4.3" panel (found on the OMAP3 Pandora board).
+
+config DRM_PANEL_TPO_TPG110
+	tristate "TPO TPG 800x400 panel"
+	depends on OF && SPI && GPIOLIB
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for TPO TPG110
+	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
+	  800x400 LCD panels.
+
+config DRM_PANEL_TRULY_NT35597_WQXGA
+	tristate "Truly WQXGA"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
+	  Video Mode panel
+
+config DRM_PANEL_VISIONOX_RM69299
+	tristate "Visionox RM69299"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for Visionox
+	  RM69299  DSI Video Mode panel.
+
+config DRM_PANEL_WIDECHIPS_WS2401
+	tristate "Widechips WS2401 DPI panel driver"
+	depends on SPI && GPIOLIB
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_MIPI_DBI
+	help
+	  Say Y here if you want to enable support for the Widechips WS2401 DPI
+	  480x800 display controller used in panels such as Samsung LMS380KF01.
+	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
+
+config DRM_PANEL_XINPENG_XPP055C272
+	tristate "Xinpeng XPP055C272 panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Xinpeng
+	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
+	  system interfaces.
+endmenu