Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 374 insertions, 0 deletions

diff --git a/drivers/gpu/drm/panel/panel-arm-versatile.c b/drivers/gpu/drm/panel/panel-arm-versatile.c
new file mode 100644
index 000000000..abb078884
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-arm-versatile.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Panel driver for the ARM Versatile family reference designs from
+ * ARM Limited.
+ *
+ * Author:
+ * Linus Walleij <linus.wallei@linaro.org>
+ *
+ * On the Versatile AB, these panels come mounted on daughterboards
+ * named "IB1" or "IB2" (Interface Board 1 & 2 respectively.) They
+ * are documented in ARM DUI 0225D Appendix C and D. These daughter
+ * boards support TFT display panels.
+ *
+ * - The IB1 is a passive board where the display connector defines a
+ *   few wires for encoding the display type for autodetection,
+ *   suitable display settings can then be looked up from this setting.
+ *   The magic bits can be read out from the system controller.
+ *
+ * - The IB2 is a more complex board intended for GSM phone development
+ *   with some logic and a control register, which needs to be accessed
+ *   and the board display needs to be turned on explicitly.
+ *
+ * On the Versatile PB, a special CLCD adaptor board is available
+ * supporting the same displays as the Versatile AB, plus one more
+ * Epson QCIF display.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+/*
+ * This configuration register in the Versatile and RealView
+ * family is uniformly present but appears more and more
+ * unutilized starting with the RealView series.
+ */
+#define SYS_CLCD			0x50
+
+/* The Versatile can detect the connected panel type */
+#define SYS_CLCD_CLCDID_MASK		(BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12))
+#define SYS_CLCD_ID_SANYO_3_8		(0x00 << 8)
+#define SYS_CLCD_ID_SHARP_8_4		(0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2		(0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5		(0x07 << 8)
+#define SYS_CLCD_ID_VGA			(0x1f << 8)
+
+/* IB2 control register for the Versatile daughterboard */
+#define IB2_CTRL			0x00
+#define IB2_CTRL_LCD_SD			BIT(1) /* 1 = shut down LCD */
+#define IB2_CTRL_LCD_BL_ON		BIT(0)
+#define IB2_CTRL_LCD_MASK		(BIT(0)|BIT(1))
+
+/**
+ * struct versatile_panel_type - lookup struct for the supported panels
+ */
+struct versatile_panel_type {
+	/**
+	 * @name: the name of this panel
+	 */
+	const char *name;
+	/**
+	 * @magic: the magic value from the detection register
+	 */
+	u32 magic;
+	/**
+	 * @mode: the DRM display mode for this panel
+	 */
+	struct drm_display_mode mode;
+	/**
+	 * @bus_flags: the DRM bus flags for this panel e.g. inverted clock
+	 */
+	u32 bus_flags;
+	/**
+	 * @width_mm: the panel width in mm
+	 */
+	u32 width_mm;
+	/**
+	 * @height_mm: the panel height in mm
+	 */
+	u32 height_mm;
+	/**
+	 * @ib2: the panel may be connected on an IB2 daughterboard
+	 */
+	bool ib2;
+};
+
+/**
+ * struct versatile_panel - state container for the Versatile panels
+ */
+struct versatile_panel {
+	/**
+	 * @dev: the container device
+	 */
+	struct device *dev;
+	/**
+	 * @panel: the DRM panel instance for this device
+	 */
+	struct drm_panel panel;
+	/**
+	 * @panel_type: the Versatile panel type as detected
+	 */
+	const struct versatile_panel_type *panel_type;
+	/**
+	 * @map: map to the parent syscon where the main register reside
+	 */
+	struct regmap *map;
+	/**
+	 * @ib2_map: map to the IB2 syscon, if applicable
+	 */
+	struct regmap *ib2_map;
+};
+
+static const struct versatile_panel_type versatile_panels[] = {
+	/*
+	 * Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT
+	 * found on the Versatile AB IB1 connector or the Versatile
+	 * PB adaptor board connector.
+	 */
+	{
+		.name = "Sanyo TM38QV67A02A",
+		.magic = SYS_CLCD_ID_SANYO_3_8,
+		.width_mm = 79,
+		.height_mm = 54,
+		.mode = {
+			.clock = 10000,
+			.hdisplay = 320,
+			.hsync_start = 320 + 6,
+			.hsync_end = 320 + 6 + 6,
+			.htotal = 320 + 6 + 6 + 6,
+			.vdisplay = 240,
+			.vsync_start = 240 + 5,
+			.vsync_end = 240 + 5 + 6,
+			.vtotal = 240 + 5 + 6 + 5,
+			.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+		},
+	},
+	/*
+	 * Sharp LQ084V1DG21 640x480 VGA Color TFT module
+	 * found on the Versatile AB IB1 connector or the Versatile
+	 * PB adaptor board connector.
+	 */
+	{
+		.name = "Sharp LQ084V1DG21",
+		.magic = SYS_CLCD_ID_SHARP_8_4,
+		.width_mm = 171,
+		.height_mm = 130,
+		.mode = {
+			.clock = 25000,
+			.hdisplay = 640,
+			.hsync_start = 640 + 24,
+			.hsync_end = 640 + 24 + 96,
+			.htotal = 640 + 24 + 96 + 24,
+			.vdisplay = 480,
+			.vsync_start = 480 + 11,
+			.vsync_end = 480 + 11 + 2,
+			.vtotal = 480 + 11 + 2 + 32,
+			.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+		},
+	},
+	/*
+	 * Epson L2F50113T00 - 2.2 inch QCIF 176x220 Color TFT
+	 * found on the Versatile PB adaptor board connector.
+	 */
+	{
+		.name = "Epson L2F50113T00",
+		.magic = SYS_CLCD_ID_EPSON_2_2,
+		.width_mm = 34,
+		.height_mm = 45,
+		.mode = {
+			.clock = 62500,
+			.hdisplay = 176,
+			.hsync_start = 176 + 2,
+			.hsync_end = 176 + 2 + 3,
+			.htotal = 176 + 2 + 3 + 3,
+			.vdisplay = 220,
+			.vsync_start = 220 + 0,
+			.vsync_end = 220 + 0 + 2,
+			.vtotal = 220 + 0 + 2 + 1,
+			.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+		},
+		.bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	},
+	/*
+	 * Sanyo ALR252RGT 240x320 portrait display found on the
+	 * Versatile AB IB2 daughterboard for GSM prototyping.
+	 */
+	{
+		.name = "Sanyo ALR252RGT",
+		.magic = SYS_CLCD_ID_SANYO_2_5,
+		.width_mm = 37,
+		.height_mm = 50,
+		.mode = {
+			.clock = 5400,
+			.hdisplay = 240,
+			.hsync_start = 240 + 10,
+			.hsync_end = 240 + 10 + 10,
+			.htotal = 240 + 10 + 10 + 20,
+			.vdisplay = 320,
+			.vsync_start = 320 + 2,
+			.vsync_end = 320 + 2 + 2,
+			.vtotal = 320 + 2 + 2 + 2,
+			.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+		},
+		.bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+		.ib2 = true,
+	},
+};
+
+static inline struct versatile_panel *
+to_versatile_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct versatile_panel, panel);
+}
+
+static int versatile_panel_disable(struct drm_panel *panel)
+{
+	struct versatile_panel *vpanel = to_versatile_panel(panel);
+
+	/* If we're on an IB2 daughterboard, turn off display */
+	if (vpanel->ib2_map) {
+		dev_dbg(vpanel->dev, "disable IB2 display\n");
+		regmap_update_bits(vpanel->ib2_map,
+				   IB2_CTRL,
+				   IB2_CTRL_LCD_MASK,
+				   IB2_CTRL_LCD_SD);
+	}
+
+	return 0;
+}
+
+static int versatile_panel_enable(struct drm_panel *panel)
+{
+	struct versatile_panel *vpanel = to_versatile_panel(panel);
+
+	/* If we're on an IB2 daughterboard, turn on display */
+	if (vpanel->ib2_map) {
+		dev_dbg(vpanel->dev, "enable IB2 display\n");
+		regmap_update_bits(vpanel->ib2_map,
+				   IB2_CTRL,
+				   IB2_CTRL_LCD_MASK,
+				   IB2_CTRL_LCD_BL_ON);
+	}
+
+	return 0;
+}
+
+static int versatile_panel_get_modes(struct drm_panel *panel,
+				     struct drm_connector *connector)
+{
+	struct versatile_panel *vpanel = to_versatile_panel(panel);
+	struct drm_display_mode *mode;
+
+	connector->display_info.width_mm = vpanel->panel_type->width_mm;
+	connector->display_info.height_mm = vpanel->panel_type->height_mm;
+	connector->display_info.bus_flags = vpanel->panel_type->bus_flags;
+
+	mode = drm_mode_duplicate(connector->dev, &vpanel->panel_type->mode);
+	drm_mode_set_name(mode);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+	mode->width_mm = vpanel->panel_type->width_mm;
+	mode->height_mm = vpanel->panel_type->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs versatile_panel_drm_funcs = {
+	.disable = versatile_panel_disable,
+	.enable = versatile_panel_enable,
+	.get_modes = versatile_panel_get_modes,
+};
+
+static int versatile_panel_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct versatile_panel *vpanel;
+	struct device *parent;
+	struct regmap *map;
+	int ret;
+	u32 val;
+	int i;
+
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent for versatile panel\n");
+		return -ENODEV;
+	}
+	map = syscon_node_to_regmap(parent->of_node);
+	if (IS_ERR(map)) {
+		dev_err(dev, "no regmap for versatile panel parent\n");
+		return PTR_ERR(map);
+	}
+
+	vpanel = devm_kzalloc(dev, sizeof(*vpanel), GFP_KERNEL);
+	if (!vpanel)
+		return -ENOMEM;
+
+	ret = regmap_read(map, SYS_CLCD, &val);
+	if (ret) {
+		dev_err(dev, "cannot access syscon regs\n");
+		return ret;
+	}
+
+	val &= SYS_CLCD_CLCDID_MASK;
+
+	for (i = 0; i < ARRAY_SIZE(versatile_panels); i++) {
+		const struct versatile_panel_type *pt;
+
+		pt = &versatile_panels[i];
+		if (pt->magic == val) {
+			vpanel->panel_type = pt;
+			break;
+		}
+	}
+
+	/* No panel detected or VGA, let's leave this show */
+	if (i == ARRAY_SIZE(versatile_panels)) {
+		dev_info(dev, "no panel detected\n");
+		return -ENODEV;
+	}
+
+	dev_info(dev, "detected: %s\n", vpanel->panel_type->name);
+	vpanel->dev = dev;
+	vpanel->map = map;
+
+	/* Check if the panel is mounted on an IB2 daughterboard */
+	if (vpanel->panel_type->ib2) {
+		vpanel->ib2_map = syscon_regmap_lookup_by_compatible(
+			"arm,versatile-ib2-syscon");
+		if (IS_ERR(vpanel->ib2_map))
+			vpanel->ib2_map = NULL;
+		else
+			dev_info(dev, "panel mounted on IB2 daughterboard\n");
+	}
+
+	drm_panel_init(&vpanel->panel, dev, &versatile_panel_drm_funcs,
+		       DRM_MODE_CONNECTOR_DPI);
+
+	drm_panel_add(&vpanel->panel);
+
+	return 0;
+}
+
+static const struct of_device_id versatile_panel_match[] = {
+	{ .compatible = "arm,versatile-tft-panel", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, versatile_panel_match);
+
+static struct platform_driver versatile_panel_driver = {
+	.probe		= versatile_panel_probe,
+	.driver		= {
+		.name	= "versatile-tft-panel",
+		.of_match_table = versatile_panel_match,
+	},
+};
+module_platform_driver(versatile_panel_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("ARM Versatile panel driver");
+MODULE_LICENSE("GPL v2");