Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 473 insertions, 0 deletions

diff --git a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
new file mode 100644
index 000000000..48c1702a8
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ *
+ * Author:
+ * - Jagan Teki <jagan@amarulasolutions.com>
+ * - Stephen Chen <stephen@radxa.com>
+ */
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#define JD9365DA_INIT_CMD_LEN		2
+
+struct jadard_init_cmd {
+	u8 data[JD9365DA_INIT_CMD_LEN];
+};
+
+struct jadard_panel_desc {
+	const struct drm_display_mode mode;
+	unsigned int lanes;
+	enum mipi_dsi_pixel_format format;
+	const struct jadard_init_cmd *init_cmds;
+	u32 num_init_cmds;
+};
+
+struct jadard {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	const struct jadard_panel_desc *desc;
+
+	struct regulator *vdd;
+	struct regulator *vccio;
+	struct gpio_desc *reset;
+};
+
+static inline struct jadard *panel_to_jadard(struct drm_panel *panel)
+{
+	return container_of(panel, struct jadard, panel);
+}
+
+static int jadard_enable(struct drm_panel *panel)
+{
+	struct device *dev = panel->dev;
+	struct jadard *jadard = panel_to_jadard(panel);
+	const struct jadard_panel_desc *desc = jadard->desc;
+	struct mipi_dsi_device *dsi = jadard->dsi;
+	unsigned int i;
+	int err;
+
+	msleep(10);
+
+	for (i = 0; i < desc->num_init_cmds; i++) {
+		const struct jadard_init_cmd *cmd = &desc->init_cmds[i];
+
+		err = mipi_dsi_dcs_write_buffer(dsi, cmd->data, JD9365DA_INIT_CMD_LEN);
+		if (err < 0)
+			return err;
+	}
+
+	msleep(120);
+
+	err = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (err < 0)
+		DRM_DEV_ERROR(dev, "failed to exit sleep mode ret = %d\n", err);
+
+	err =  mipi_dsi_dcs_set_display_on(dsi);
+	if (err < 0)
+		DRM_DEV_ERROR(dev, "failed to set display on ret = %d\n", err);
+
+	return 0;
+}
+
+static int jadard_disable(struct drm_panel *panel)
+{
+	struct device *dev = panel->dev;
+	struct jadard *jadard = panel_to_jadard(panel);
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_off(jadard->dsi);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "failed to set display off: %d\n", ret);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(jadard->dsi);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "failed to enter sleep mode: %d\n", ret);
+
+	return 0;
+}
+
+static int jadard_prepare(struct drm_panel *panel)
+{
+	struct jadard *jadard = panel_to_jadard(panel);
+	int ret;
+
+	ret = regulator_enable(jadard->vccio);
+	if (ret)
+		return ret;
+
+	ret = regulator_enable(jadard->vdd);
+	if (ret)
+		return ret;
+
+	gpiod_set_value(jadard->reset, 1);
+	msleep(5);
+
+	gpiod_set_value(jadard->reset, 0);
+	msleep(10);
+
+	gpiod_set_value(jadard->reset, 1);
+	msleep(120);
+
+	return 0;
+}
+
+static int jadard_unprepare(struct drm_panel *panel)
+{
+	struct jadard *jadard = panel_to_jadard(panel);
+
+	gpiod_set_value(jadard->reset, 1);
+	msleep(120);
+
+	regulator_disable(jadard->vdd);
+	regulator_disable(jadard->vccio);
+
+	return 0;
+}
+
+static int jadard_get_modes(struct drm_panel *panel,
+			    struct drm_connector *connector)
+{
+	struct jadard *jadard = panel_to_jadard(panel);
+	const struct drm_display_mode *desc_mode = &jadard->desc->mode;
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, desc_mode);
+	if (!mode) {
+		DRM_DEV_ERROR(&jadard->dsi->dev, "failed to add mode %ux%ux@%u\n",
+			      desc_mode->hdisplay, desc_mode->vdisplay,
+			      drm_mode_vrefresh(desc_mode));
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+	drm_mode_probed_add(connector, mode);
+
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs jadard_funcs = {
+	.disable = jadard_disable,
+	.unprepare = jadard_unprepare,
+	.prepare = jadard_prepare,
+	.enable = jadard_enable,
+	.get_modes = jadard_get_modes,
+};
+
+static const struct jadard_init_cmd cz101b4001_init_cmds[] = {
+	{ .data = { 0xE0, 0x00 } },
+	{ .data = { 0xE1, 0x93 } },
+	{ .data = { 0xE2, 0x65 } },
+	{ .data = { 0xE3, 0xF8 } },
+	{ .data = { 0x80, 0x03 } },
+	{ .data = { 0xE0, 0x01 } },
+	{ .data = { 0x00, 0x00 } },
+	{ .data = { 0x01, 0x3B } },
+	{ .data = { 0x0C, 0x74 } },
+	{ .data = { 0x17, 0x00 } },
+	{ .data = { 0x18, 0xAF } },
+	{ .data = { 0x19, 0x00 } },
+	{ .data = { 0x1A, 0x00 } },
+	{ .data = { 0x1B, 0xAF } },
+	{ .data = { 0x1C, 0x00 } },
+	{ .data = { 0x35, 0x26 } },
+	{ .data = { 0x37, 0x09 } },
+	{ .data = { 0x38, 0x04 } },
+	{ .data = { 0x39, 0x00 } },
+	{ .data = { 0x3A, 0x01 } },
+	{ .data = { 0x3C, 0x78 } },
+	{ .data = { 0x3D, 0xFF } },
+	{ .data = { 0x3E, 0xFF } },
+	{ .data = { 0x3F, 0x7F } },
+	{ .data = { 0x40, 0x06 } },
+	{ .data = { 0x41, 0xA0 } },
+	{ .data = { 0x42, 0x81 } },
+	{ .data = { 0x43, 0x14 } },
+	{ .data = { 0x44, 0x23 } },
+	{ .data = { 0x45, 0x28 } },
+	{ .data = { 0x55, 0x02 } },
+	{ .data = { 0x57, 0x69 } },
+	{ .data = { 0x59, 0x0A } },
+	{ .data = { 0x5A, 0x2A } },
+	{ .data = { 0x5B, 0x17 } },
+	{ .data = { 0x5D, 0x7F } },
+	{ .data = { 0x5E, 0x6B } },
+	{ .data = { 0x5F, 0x5C } },
+	{ .data = { 0x60, 0x4F } },
+	{ .data = { 0x61, 0x4D } },
+	{ .data = { 0x62, 0x3F } },
+	{ .data = { 0x63, 0x42 } },
+	{ .data = { 0x64, 0x2B } },
+	{ .data = { 0x65, 0x44 } },
+	{ .data = { 0x66, 0x43 } },
+	{ .data = { 0x67, 0x43 } },
+	{ .data = { 0x68, 0x63 } },
+	{ .data = { 0x69, 0x52 } },
+	{ .data = { 0x6A, 0x5A } },
+	{ .data = { 0x6B, 0x4F } },
+	{ .data = { 0x6C, 0x4E } },
+	{ .data = { 0x6D, 0x20 } },
+	{ .data = { 0x6E, 0x0F } },
+	{ .data = { 0x6F, 0x00 } },
+	{ .data = { 0x70, 0x7F } },
+	{ .data = { 0x71, 0x6B } },
+	{ .data = { 0x72, 0x5C } },
+	{ .data = { 0x73, 0x4F } },
+	{ .data = { 0x74, 0x4D } },
+	{ .data = { 0x75, 0x3F } },
+	{ .data = { 0x76, 0x42 } },
+	{ .data = { 0x77, 0x2B } },
+	{ .data = { 0x78, 0x44 } },
+	{ .data = { 0x79, 0x43 } },
+	{ .data = { 0x7A, 0x43 } },
+	{ .data = { 0x7B, 0x63 } },
+	{ .data = { 0x7C, 0x52 } },
+	{ .data = { 0x7D, 0x5A } },
+	{ .data = { 0x7E, 0x4F } },
+	{ .data = { 0x7F, 0x4E } },
+	{ .data = { 0x80, 0x20 } },
+	{ .data = { 0x81, 0x0F } },
+	{ .data = { 0x82, 0x00 } },
+	{ .data = { 0xE0, 0x02 } },
+	{ .data = { 0x00, 0x02 } },
+	{ .data = { 0x01, 0x02 } },
+	{ .data = { 0x02, 0x00 } },
+	{ .data = { 0x03, 0x00 } },
+	{ .data = { 0x04, 0x1E } },
+	{ .data = { 0x05, 0x1E } },
+	{ .data = { 0x06, 0x1F } },
+	{ .data = { 0x07, 0x1F } },
+	{ .data = { 0x08, 0x1F } },
+	{ .data = { 0x09, 0x17 } },
+	{ .data = { 0x0A, 0x17 } },
+	{ .data = { 0x0B, 0x37 } },
+	{ .data = { 0x0C, 0x37 } },
+	{ .data = { 0x0D, 0x47 } },
+	{ .data = { 0x0E, 0x47 } },
+	{ .data = { 0x0F, 0x45 } },
+	{ .data = { 0x10, 0x45 } },
+	{ .data = { 0x11, 0x4B } },
+	{ .data = { 0x12, 0x4B } },
+	{ .data = { 0x13, 0x49 } },
+	{ .data = { 0x14, 0x49 } },
+	{ .data = { 0x15, 0x1F } },
+	{ .data = { 0x16, 0x01 } },
+	{ .data = { 0x17, 0x01 } },
+	{ .data = { 0x18, 0x00 } },
+	{ .data = { 0x19, 0x00 } },
+	{ .data = { 0x1A, 0x1E } },
+	{ .data = { 0x1B, 0x1E } },
+	{ .data = { 0x1C, 0x1F } },
+	{ .data = { 0x1D, 0x1F } },
+	{ .data = { 0x1E, 0x1F } },
+	{ .data = { 0x1F, 0x17 } },
+	{ .data = { 0x20, 0x17 } },
+	{ .data = { 0x21, 0x37 } },
+	{ .data = { 0x22, 0x37 } },
+	{ .data = { 0x23, 0x46 } },
+	{ .data = { 0x24, 0x46 } },
+	{ .data = { 0x25, 0x44 } },
+	{ .data = { 0x26, 0x44 } },
+	{ .data = { 0x27, 0x4A } },
+	{ .data = { 0x28, 0x4A } },
+	{ .data = { 0x29, 0x48 } },
+	{ .data = { 0x2A, 0x48 } },
+	{ .data = { 0x2B, 0x1F } },
+	{ .data = { 0x2C, 0x01 } },
+	{ .data = { 0x2D, 0x01 } },
+	{ .data = { 0x2E, 0x00 } },
+	{ .data = { 0x2F, 0x00 } },
+	{ .data = { 0x30, 0x1F } },
+	{ .data = { 0x31, 0x1F } },
+	{ .data = { 0x32, 0x1E } },
+	{ .data = { 0x33, 0x1E } },
+	{ .data = { 0x34, 0x1F } },
+	{ .data = { 0x35, 0x17 } },
+	{ .data = { 0x36, 0x17 } },
+	{ .data = { 0x37, 0x37 } },
+	{ .data = { 0x38, 0x37 } },
+	{ .data = { 0x39, 0x08 } },
+	{ .data = { 0x3A, 0x08 } },
+	{ .data = { 0x3B, 0x0A } },
+	{ .data = { 0x3C, 0x0A } },
+	{ .data = { 0x3D, 0x04 } },
+	{ .data = { 0x3E, 0x04 } },
+	{ .data = { 0x3F, 0x06 } },
+	{ .data = { 0x40, 0x06 } },
+	{ .data = { 0x41, 0x1F } },
+	{ .data = { 0x42, 0x02 } },
+	{ .data = { 0x43, 0x02 } },
+	{ .data = { 0x44, 0x00 } },
+	{ .data = { 0x45, 0x00 } },
+	{ .data = { 0x46, 0x1F } },
+	{ .data = { 0x47, 0x1F } },
+	{ .data = { 0x48, 0x1E } },
+	{ .data = { 0x49, 0x1E } },
+	{ .data = { 0x4A, 0x1F } },
+	{ .data = { 0x4B, 0x17 } },
+	{ .data = { 0x4C, 0x17 } },
+	{ .data = { 0x4D, 0x37 } },
+	{ .data = { 0x4E, 0x37 } },
+	{ .data = { 0x4F, 0x09 } },
+	{ .data = { 0x50, 0x09 } },
+	{ .data = { 0x51, 0x0B } },
+	{ .data = { 0x52, 0x0B } },
+	{ .data = { 0x53, 0x05 } },
+	{ .data = { 0x54, 0x05 } },
+	{ .data = { 0x55, 0x07 } },
+	{ .data = { 0x56, 0x07 } },
+	{ .data = { 0x57, 0x1F } },
+	{ .data = { 0x58, 0x40 } },
+	{ .data = { 0x5B, 0x30 } },
+	{ .data = { 0x5C, 0x16 } },
+	{ .data = { 0x5D, 0x34 } },
+	{ .data = { 0x5E, 0x05 } },
+	{ .data = { 0x5F, 0x02 } },
+	{ .data = { 0x63, 0x00 } },
+	{ .data = { 0x64, 0x6A } },
+	{ .data = { 0x67, 0x73 } },
+	{ .data = { 0x68, 0x1D } },
+	{ .data = { 0x69, 0x08 } },
+	{ .data = { 0x6A, 0x6A } },
+	{ .data = { 0x6B, 0x08 } },
+	{ .data = { 0x6C, 0x00 } },
+	{ .data = { 0x6D, 0x00 } },
+	{ .data = { 0x6E, 0x00 } },
+	{ .data = { 0x6F, 0x88 } },
+	{ .data = { 0x75, 0xFF } },
+	{ .data = { 0x77, 0xDD } },
+	{ .data = { 0x78, 0x3F } },
+	{ .data = { 0x79, 0x15 } },
+	{ .data = { 0x7A, 0x17 } },
+	{ .data = { 0x7D, 0x14 } },
+	{ .data = { 0x7E, 0x82 } },
+	{ .data = { 0xE0, 0x04 } },
+	{ .data = { 0x00, 0x0E } },
+	{ .data = { 0x02, 0xB3 } },
+	{ .data = { 0x09, 0x61 } },
+	{ .data = { 0x0E, 0x48 } },
+	{ .data = { 0xE0, 0x00 } },
+	{ .data = { 0xE6, 0x02 } },
+	{ .data = { 0xE7, 0x0C } },
+};
+
+static const struct jadard_panel_desc cz101b4001_desc = {
+	.mode = {
+		.clock		= 70000,
+
+		.hdisplay	= 800,
+		.hsync_start	= 800 + 40,
+		.hsync_end	= 800 + 40 + 18,
+		.htotal		= 800 + 40 + 18 + 20,
+
+		.vdisplay	= 1280,
+		.vsync_start	= 1280 + 20,
+		.vsync_end	= 1280 + 20 + 4,
+		.vtotal		= 1280 + 20 + 4 + 20,
+
+		.width_mm	= 62,
+		.height_mm	= 110,
+		.type		= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_cmds = cz101b4001_init_cmds,
+	.num_init_cmds = ARRAY_SIZE(cz101b4001_init_cmds),
+};
+
+static int jadard_dsi_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct jadard_panel_desc *desc;
+	struct jadard *jadard;
+	int ret;
+
+	jadard = devm_kzalloc(&dsi->dev, sizeof(*jadard), GFP_KERNEL);
+	if (!jadard)
+		return -ENOMEM;
+
+	desc = of_device_get_match_data(dev);
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_NO_EOT_PACKET;
+	dsi->format = desc->format;
+	dsi->lanes = desc->lanes;
+
+	jadard->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(jadard->reset)) {
+		DRM_DEV_ERROR(&dsi->dev, "failed to get our reset GPIO\n");
+		return PTR_ERR(jadard->reset);
+	}
+
+	jadard->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(jadard->vdd)) {
+		DRM_DEV_ERROR(&dsi->dev, "failed to get vdd regulator\n");
+		return PTR_ERR(jadard->vdd);
+	}
+
+	jadard->vccio = devm_regulator_get(dev, "vccio");
+	if (IS_ERR(jadard->vccio)) {
+		DRM_DEV_ERROR(&dsi->dev, "failed to get vccio regulator\n");
+		return PTR_ERR(jadard->vccio);
+	}
+
+	drm_panel_init(&jadard->panel, dev, &jadard_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&jadard->panel);
+	if (ret)
+		return ret;
+
+	drm_panel_add(&jadard->panel);
+
+	mipi_dsi_set_drvdata(dsi, jadard);
+	jadard->dsi = dsi;
+	jadard->desc = desc;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0)
+		drm_panel_remove(&jadard->panel);
+
+	return ret;
+}
+
+static void jadard_dsi_remove(struct mipi_dsi_device *dsi)
+{
+	struct jadard *jadard = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&jadard->panel);
+}
+
+static const struct of_device_id jadard_of_match[] = {
+	{ .compatible = "chongzhou,cz101b4001", .data = &cz101b4001_desc },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jadard_of_match);
+
+static struct mipi_dsi_driver jadard_driver = {
+	.probe = jadard_dsi_probe,
+	.remove = jadard_dsi_remove,
+	.driver = {
+		.name = "jadard-jd9365da",
+		.of_match_table = jadard_of_match,
+	},
+};
+module_mipi_dsi_driver(jadard_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan@edgeble.ai>");
+MODULE_AUTHOR("Stephen Chen <stephen@radxa.com>");
+MODULE_DESCRIPTION("Jadard JD9365DA-H3 WXGA DSI panel");
+MODULE_LICENSE("GPL");