Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 482 insertions, 0 deletions

diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
new file mode 100644
index 000000000..cf078f0d3
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NewVision NV3052C IPS LCD panel driver
+ *
+ * Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net>
+ * Copyright (C) 2022, Christophe Branchereau <cbranchereau@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <video/mipi_display.h>
+#include <drm/drm_mipi_dbi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct nv3052c_panel_info {
+	const struct drm_display_mode *display_modes;
+	unsigned int num_modes;
+	u16 width_mm, height_mm;
+	u32 bus_format, bus_flags;
+};
+
+struct nv3052c {
+	struct device *dev;
+	struct drm_panel panel;
+	struct mipi_dbi dbi;
+	const struct nv3052c_panel_info *panel_info;
+	struct regulator *supply;
+	struct gpio_desc *reset_gpio;
+};
+
+struct nv3052c_reg {
+	u8 cmd;
+	u8 val;
+};
+
+static const struct nv3052c_reg nv3052c_panel_regs[] = {
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x01 },
+	{ 0xe3, 0x00 },
+	{ 0x40, 0x00 },
+	{ 0x03, 0x40 },
+	{ 0x04, 0x00 },
+	{ 0x05, 0x03 },
+	{ 0x08, 0x00 },
+	{ 0x09, 0x07 },
+	{ 0x0a, 0x01 },
+	{ 0x0b, 0x32 },
+	{ 0x0c, 0x32 },
+	{ 0x0d, 0x0b },
+	{ 0x0e, 0x00 },
+	{ 0x23, 0xa0 },
+	{ 0x24, 0x0c },
+	{ 0x25, 0x06 },
+	{ 0x26, 0x14 },
+	{ 0x27, 0x14 },
+	{ 0x38, 0xcc },
+	{ 0x39, 0xd7 },
+	{ 0x3a, 0x4a },
+	{ 0x28, 0x40 },
+	{ 0x29, 0x01 },
+	{ 0x2a, 0xdf },
+	{ 0x49, 0x3c },
+	{ 0x91, 0x77 },
+	{ 0x92, 0x77 },
+	{ 0xa0, 0x55 },
+	{ 0xa1, 0x50 },
+	{ 0xa4, 0x9c },
+	{ 0xa7, 0x02 },
+	{ 0xa8, 0x01 },
+	{ 0xa9, 0x01 },
+	{ 0xaa, 0xfc },
+	{ 0xab, 0x28 },
+	{ 0xac, 0x06 },
+	{ 0xad, 0x06 },
+	{ 0xae, 0x06 },
+	{ 0xaf, 0x03 },
+	{ 0xb0, 0x08 },
+	{ 0xb1, 0x26 },
+	{ 0xb2, 0x28 },
+	{ 0xb3, 0x28 },
+	{ 0xb4, 0x33 },
+	{ 0xb5, 0x08 },
+	{ 0xb6, 0x26 },
+	{ 0xb7, 0x08 },
+	{ 0xb8, 0x26 },
+	{ 0xf0, 0x00 },
+	{ 0xf6, 0xc0 },
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x02 },
+	{ 0xb0, 0x0b },
+	{ 0xb1, 0x16 },
+	{ 0xb2, 0x17 },
+	{ 0xb3, 0x2c },
+	{ 0xb4, 0x32 },
+	{ 0xb5, 0x3b },
+	{ 0xb6, 0x29 },
+	{ 0xb7, 0x40 },
+	{ 0xb8, 0x0d },
+	{ 0xb9, 0x05 },
+	{ 0xba, 0x12 },
+	{ 0xbb, 0x10 },
+	{ 0xbc, 0x12 },
+	{ 0xbd, 0x15 },
+	{ 0xbe, 0x19 },
+	{ 0xbf, 0x0e },
+	{ 0xc0, 0x16 },
+	{ 0xc1, 0x0a },
+	{ 0xd0, 0x0c },
+	{ 0xd1, 0x17 },
+	{ 0xd2, 0x14 },
+	{ 0xd3, 0x2e },
+	{ 0xd4, 0x32 },
+	{ 0xd5, 0x3c },
+	{ 0xd6, 0x22 },
+	{ 0xd7, 0x3d },
+	{ 0xd8, 0x0d },
+	{ 0xd9, 0x07 },
+	{ 0xda, 0x13 },
+	{ 0xdb, 0x13 },
+	{ 0xdc, 0x11 },
+	{ 0xdd, 0x15 },
+	{ 0xde, 0x19 },
+	{ 0xdf, 0x10 },
+	{ 0xe0, 0x17 },
+	{ 0xe1, 0x0a },
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x03 },
+	{ 0x00, 0x2a },
+	{ 0x01, 0x2a },
+	{ 0x02, 0x2a },
+	{ 0x03, 0x2a },
+	{ 0x04, 0x61 },
+	{ 0x05, 0x80 },
+	{ 0x06, 0xc7 },
+	{ 0x07, 0x01 },
+	{ 0x08, 0x03 },
+	{ 0x09, 0x04 },
+	{ 0x70, 0x22 },
+	{ 0x71, 0x80 },
+	{ 0x30, 0x2a },
+	{ 0x31, 0x2a },
+	{ 0x32, 0x2a },
+	{ 0x33, 0x2a },
+	{ 0x34, 0x61 },
+	{ 0x35, 0xc5 },
+	{ 0x36, 0x80 },
+	{ 0x37, 0x23 },
+	{ 0x40, 0x03 },
+	{ 0x41, 0x04 },
+	{ 0x42, 0x05 },
+	{ 0x43, 0x06 },
+	{ 0x44, 0x11 },
+	{ 0x45, 0xe8 },
+	{ 0x46, 0xe9 },
+	{ 0x47, 0x11 },
+	{ 0x48, 0xea },
+	{ 0x49, 0xeb },
+	{ 0x50, 0x07 },
+	{ 0x51, 0x08 },
+	{ 0x52, 0x09 },
+	{ 0x53, 0x0a },
+	{ 0x54, 0x11 },
+	{ 0x55, 0xec },
+	{ 0x56, 0xed },
+	{ 0x57, 0x11 },
+	{ 0x58, 0xef },
+	{ 0x59, 0xf0 },
+	{ 0xb1, 0x01 },
+	{ 0xb4, 0x15 },
+	{ 0xb5, 0x16 },
+	{ 0xb6, 0x09 },
+	{ 0xb7, 0x0f },
+	{ 0xb8, 0x0d },
+	{ 0xb9, 0x0b },
+	{ 0xba, 0x00 },
+	{ 0xc7, 0x02 },
+	{ 0xca, 0x17 },
+	{ 0xcb, 0x18 },
+	{ 0xcc, 0x0a },
+	{ 0xcd, 0x10 },
+	{ 0xce, 0x0e },
+	{ 0xcf, 0x0c },
+	{ 0xd0, 0x00 },
+	{ 0x81, 0x00 },
+	{ 0x84, 0x15 },
+	{ 0x85, 0x16 },
+	{ 0x86, 0x10 },
+	{ 0x87, 0x0a },
+	{ 0x88, 0x0c },
+	{ 0x89, 0x0e },
+	{ 0x8a, 0x02 },
+	{ 0x97, 0x00 },
+	{ 0x9a, 0x17 },
+	{ 0x9b, 0x18 },
+	{ 0x9c, 0x0f },
+	{ 0x9d, 0x09 },
+	{ 0x9e, 0x0b },
+	{ 0x9f, 0x0d },
+	{ 0xa0, 0x01 },
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x02 },
+	{ 0x01, 0x01 },
+	{ 0x02, 0xda },
+	{ 0x03, 0xba },
+	{ 0x04, 0xa8 },
+	{ 0x05, 0x9a },
+	{ 0x06, 0x70 },
+	{ 0x07, 0xff },
+	{ 0x08, 0x91 },
+	{ 0x09, 0x90 },
+	{ 0x0a, 0xff },
+	{ 0x0b, 0x8f },
+	{ 0x0c, 0x60 },
+	{ 0x0d, 0x58 },
+	{ 0x0e, 0x48 },
+	{ 0x0f, 0x38 },
+	{ 0x10, 0x2b },
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x00 },
+	{ 0x36, 0x0a },
+};
+
+static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
+{
+	return container_of(panel, struct nv3052c, panel);
+}
+
+static int nv3052c_prepare(struct drm_panel *panel)
+{
+	struct nv3052c *priv = to_nv3052c(panel);
+	struct mipi_dbi *dbi = &priv->dbi;
+	unsigned int i;
+	int err;
+
+	err = regulator_enable(priv->supply);
+	if (err) {
+		dev_err(priv->dev, "Failed to enable power supply: %d\n", err);
+		return err;
+	}
+
+	/* Reset the chip */
+	gpiod_set_value_cansleep(priv->reset_gpio, 1);
+	usleep_range(10, 1000);
+	gpiod_set_value_cansleep(priv->reset_gpio, 0);
+	usleep_range(5000, 20000);
+
+	for (i = 0; i < ARRAY_SIZE(nv3052c_panel_regs); i++) {
+		err = mipi_dbi_command(dbi, nv3052c_panel_regs[i].cmd,
+				       nv3052c_panel_regs[i].val);
+
+		if (err) {
+			dev_err(priv->dev, "Unable to set register: %d\n", err);
+			goto err_disable_regulator;
+		}
+	}
+
+	err = mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
+	if (err) {
+		dev_err(priv->dev, "Unable to exit sleep mode: %d\n", err);
+		goto err_disable_regulator;
+	}
+
+	return 0;
+
+err_disable_regulator:
+	regulator_disable(priv->supply);
+	return err;
+}
+
+static int nv3052c_unprepare(struct drm_panel *panel)
+{
+	struct nv3052c *priv = to_nv3052c(panel);
+	struct mipi_dbi *dbi = &priv->dbi;
+	int err;
+
+	err = mipi_dbi_command(dbi, MIPI_DCS_ENTER_SLEEP_MODE);
+	if (err)
+		dev_err(priv->dev, "Unable to enter sleep mode: %d\n", err);
+
+	gpiod_set_value_cansleep(priv->reset_gpio, 1);
+	regulator_disable(priv->supply);
+
+	return 0;
+}
+
+static int nv3052c_enable(struct drm_panel *panel)
+{
+	struct nv3052c *priv = to_nv3052c(panel);
+	struct mipi_dbi *dbi = &priv->dbi;
+	int err;
+
+	err = mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
+	if (err) {
+		dev_err(priv->dev, "Unable to enable display: %d\n", err);
+		return err;
+	}
+
+	if (panel->backlight) {
+		/* Wait for the picture to be ready before enabling backlight */
+		msleep(120);
+	}
+
+	return 0;
+}
+
+static int nv3052c_disable(struct drm_panel *panel)
+{
+	struct nv3052c *priv = to_nv3052c(panel);
+	struct mipi_dbi *dbi = &priv->dbi;
+	int err;
+
+	err = mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF);
+	if (err) {
+		dev_err(priv->dev, "Unable to disable display: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int nv3052c_get_modes(struct drm_panel *panel,
+			     struct drm_connector *connector)
+{
+	struct nv3052c *priv = to_nv3052c(panel);
+	const struct nv3052c_panel_info *panel_info = priv->panel_info;
+	struct drm_display_mode *mode;
+	unsigned int i;
+
+	for (i = 0; i < panel_info->num_modes; i++) {
+		mode = drm_mode_duplicate(connector->dev,
+					  &panel_info->display_modes[i]);
+		if (!mode)
+			return -ENOMEM;
+
+		drm_mode_set_name(mode);
+
+		mode->type = DRM_MODE_TYPE_DRIVER;
+		if (panel_info->num_modes == 1)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_probed_add(connector, mode);
+	}
+
+	connector->display_info.bpc = 8;
+	connector->display_info.width_mm = panel_info->width_mm;
+	connector->display_info.height_mm = panel_info->height_mm;
+
+	drm_display_info_set_bus_formats(&connector->display_info,
+					 &panel_info->bus_format, 1);
+	connector->display_info.bus_flags = panel_info->bus_flags;
+
+	return panel_info->num_modes;
+}
+
+static const struct drm_panel_funcs nv3052c_funcs = {
+	.prepare	= nv3052c_prepare,
+	.unprepare	= nv3052c_unprepare,
+	.enable		= nv3052c_enable,
+	.disable	= nv3052c_disable,
+	.get_modes	= nv3052c_get_modes,
+};
+
+static int nv3052c_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct nv3052c *priv;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	priv->panel_info = of_device_get_match_data(dev);
+	if (!priv->panel_info)
+		return -EINVAL;
+
+	priv->supply = devm_regulator_get(dev, "power");
+	if (IS_ERR(priv->supply))
+		return dev_err_probe(dev, PTR_ERR(priv->supply), "Failed to get power supply\n");
+
+	priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO\n");
+
+	err = mipi_dbi_spi_init(spi, &priv->dbi, NULL);
+	if (err)
+		return dev_err_probe(dev, err, "MIPI DBI init failed\n");
+
+	priv->dbi.read_commands = NULL;
+
+	spi_set_drvdata(spi, priv);
+
+	drm_panel_init(&priv->panel, dev, &nv3052c_funcs,
+		       DRM_MODE_CONNECTOR_DPI);
+
+	err = drm_panel_of_backlight(&priv->panel);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to attach backlight\n");
+
+	drm_panel_add(&priv->panel);
+
+	return 0;
+}
+
+static void nv3052c_remove(struct spi_device *spi)
+{
+	struct nv3052c *priv = spi_get_drvdata(spi);
+
+	drm_panel_remove(&priv->panel);
+	drm_panel_disable(&priv->panel);
+	drm_panel_unprepare(&priv->panel);
+}
+
+static const struct drm_display_mode ltk035c5444t_modes[] = {
+	{ /* 60 Hz */
+		.clock = 24000,
+		.hdisplay = 640,
+		.hsync_start = 640 + 96,
+		.hsync_end = 640 + 96 + 16,
+		.htotal = 640 + 96 + 16 + 48,
+		.vdisplay = 480,
+		.vsync_start = 480 + 5,
+		.vsync_end = 480 + 5 + 2,
+		.vtotal = 480 + 5 + 2 + 13,
+		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	},
+	{ /* 50 Hz */
+		.clock = 18000,
+		.hdisplay = 640,
+		.hsync_start = 640 + 39,
+		.hsync_end = 640 + 39 + 2,
+		.htotal = 640 + 39 + 2 + 39,
+		.vdisplay = 480,
+		.vsync_start = 480 + 5,
+		.vsync_end = 480 + 5 + 2,
+		.vtotal = 480 + 5 + 2 + 13,
+		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	},
+};
+
+static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
+	.display_modes = ltk035c5444t_modes,
+	.num_modes = ARRAY_SIZE(ltk035c5444t_modes),
+	.width_mm = 77,
+	.height_mm = 64,
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+};
+
+static const struct of_device_id nv3052c_of_match[] = {
+	{ .compatible = "leadtek,ltk035c5444t", .data = &ltk035c5444t_panel_info },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nv3052c_of_match);
+
+static struct spi_driver nv3052c_driver = {
+	.driver = {
+		.name = "nv3052c",
+		.of_match_table = nv3052c_of_match,
+	},
+	.probe = nv3052c_probe,
+	.remove = nv3052c_remove,
+};
+module_spi_driver(nv3052c_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>");
+MODULE_LICENSE("GPL v2");