Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 580 insertions, 0 deletions

diff --git a/drivers/gpu/drm/savage/savage_drv.h b/drivers/gpu/drm/savage/savage_drv.h
new file mode 100644
index 000000000..b0081bb64
--- /dev/null
+++ b/drivers/gpu/drm/savage/savage_drv.h
@@ -0,0 +1,580 @@
+/* savage_drv.h -- Private header for the savage driver */
+/*
+ * Copyright 2004  Felix Kuehling
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __SAVAGE_DRV_H__
+#define __SAVAGE_DRV_H__
+
+#include <linux/io.h>
+
+#include <drm/drm_ioctl.h>
+#include <drm/drm_legacy.h>
+#include <drm/savage_drm.h>
+
+#define DRIVER_AUTHOR	"Felix Kuehling"
+
+#define DRIVER_NAME	"savage"
+#define DRIVER_DESC	"Savage3D/MX/IX, Savage4, SuperSavage, Twister, ProSavage[DDR]"
+#define DRIVER_DATE	"20050313"
+
+#define DRIVER_MAJOR		2
+#define DRIVER_MINOR		4
+#define DRIVER_PATCHLEVEL	1
+/* Interface history:
+ *
+ * 1.x   The DRM driver from the VIA/S3 code drop, basically a dummy
+ * 2.0   The first real DRM
+ * 2.1   Scissors registers managed by the DRM, 3D operations clipped by
+ *       cliprects of the cmdbuf ioctl
+ * 2.2   Implemented SAVAGE_CMD_DMA_IDX and SAVAGE_CMD_VB_IDX
+ * 2.3   Event counters used by BCI_EVENT_EMIT/WAIT ioctls are now 32 bits
+ *       wide and thus very long lived (unlikely to ever wrap). The size
+ *       in the struct was 32 bits before, but only 16 bits were used
+ * 2.4   Implemented command DMA. Now drm_savage_init_t.cmd_dma_offset is
+ *       actually used
+ */
+
+typedef struct drm_savage_age {
+	uint16_t event;
+	unsigned int wrap;
+} drm_savage_age_t;
+
+typedef struct drm_savage_buf_priv {
+	struct drm_savage_buf_priv *next;
+	struct drm_savage_buf_priv *prev;
+	drm_savage_age_t age;
+	struct drm_buf *buf;
+} drm_savage_buf_priv_t;
+
+typedef struct drm_savage_dma_page {
+	drm_savage_age_t age;
+	unsigned int used, flushed;
+} drm_savage_dma_page_t;
+#define SAVAGE_DMA_PAGE_SIZE 1024	/* in dwords */
+/* Fake DMA buffer size in bytes. 4 pages. Allows a maximum command
+ * size of 16kbytes or 4k entries. Minimum requirement would be
+ * 10kbytes for 255 40-byte vertices in one drawing command. */
+#define SAVAGE_FAKE_DMA_SIZE (SAVAGE_DMA_PAGE_SIZE*4*4)
+
+/* interesting bits of hardware state that are saved in dev_priv */
+typedef union {
+	struct drm_savage_common_state {
+		uint32_t vbaddr;
+	} common;
+	struct {
+		unsigned char pad[sizeof(struct drm_savage_common_state)];
+		uint32_t texctrl, texaddr;
+		uint32_t scstart, new_scstart;
+		uint32_t scend, new_scend;
+	} s3d;
+	struct {
+		unsigned char pad[sizeof(struct drm_savage_common_state)];
+		uint32_t texdescr, texaddr0, texaddr1;
+		uint32_t drawctrl0, new_drawctrl0;
+		uint32_t drawctrl1, new_drawctrl1;
+	} s4;
+} drm_savage_state_t;
+
+/* these chip tags should match the ones in the 2D driver in savage_regs.h. */
+enum savage_family {
+	S3_UNKNOWN = 0,
+	S3_SAVAGE3D,
+	S3_SAVAGE_MX,
+	S3_SAVAGE4,
+	S3_PROSAVAGE,
+	S3_TWISTER,
+	S3_PROSAVAGEDDR,
+	S3_SUPERSAVAGE,
+	S3_SAVAGE2000,
+	S3_LAST
+};
+
+extern const struct drm_ioctl_desc savage_ioctls[];
+extern int savage_max_ioctl;
+
+#define S3_SAVAGE3D_SERIES(chip)  ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE_MX))
+
+#define S3_SAVAGE4_SERIES(chip)  ((chip==S3_SAVAGE4)            \
+                                  || (chip==S3_PROSAVAGE)       \
+                                  || (chip==S3_TWISTER)         \
+                                  || (chip==S3_PROSAVAGEDDR))
+
+#define	S3_SAVAGE_MOBILE_SERIES(chip)	((chip==S3_SAVAGE_MX) || (chip==S3_SUPERSAVAGE))
+
+#define S3_SAVAGE_SERIES(chip)    ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000))
+
+#define S3_MOBILE_TWISTER_SERIES(chip)   ((chip==S3_TWISTER)    \
+                                          ||(chip==S3_PROSAVAGEDDR))
+
+/* flags */
+#define SAVAGE_IS_AGP 1
+
+typedef struct drm_savage_private {
+	drm_savage_sarea_t *sarea_priv;
+
+	drm_savage_buf_priv_t head, tail;
+
+	/* who am I? */
+	enum savage_family chipset;
+
+	unsigned int cob_size;
+	unsigned int bci_threshold_lo, bci_threshold_hi;
+	unsigned int dma_type;
+
+	/* frame buffer layout */
+	unsigned int fb_bpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+	unsigned int depth_bpp;
+	unsigned int depth_offset, depth_pitch;
+
+	/* bitmap descriptors for swap and clear */
+	unsigned int front_bd, back_bd, depth_bd;
+
+	/* local textures */
+	unsigned int texture_offset;
+	unsigned int texture_size;
+
+	/* memory regions in physical memory */
+	drm_local_map_t *sarea;
+	drm_local_map_t *mmio;
+	drm_local_map_t *fb;
+	drm_local_map_t *aperture;
+	drm_local_map_t *status;
+	drm_local_map_t *agp_textures;
+	drm_local_map_t *cmd_dma;
+	drm_local_map_t fake_dma;
+
+	int mtrr_handles[3];
+
+	/* BCI and status-related stuff */
+	volatile uint32_t *status_ptr, *bci_ptr;
+	uint32_t status_used_mask;
+	uint16_t event_counter;
+	unsigned int event_wrap;
+
+	/* Savage4 command DMA */
+	drm_savage_dma_page_t *dma_pages;
+	unsigned int nr_dma_pages, first_dma_page, current_dma_page;
+	drm_savage_age_t last_dma_age;
+
+	/* saved hw state for global/local check on S3D */
+	uint32_t hw_draw_ctrl, hw_zbuf_ctrl;
+	/* and for scissors (global, so don't emit if not changed) */
+	uint32_t hw_scissors_start, hw_scissors_end;
+
+	drm_savage_state_t state;
+
+	/* after emitting a wait cmd Savage3D needs 63 nops before next DMA */
+	unsigned int waiting;
+
+	/* config/hardware-dependent function pointers */
+	int (*wait_fifo) (struct drm_savage_private * dev_priv, unsigned int n);
+	int (*wait_evnt) (struct drm_savage_private * dev_priv, uint16_t e);
+	/* Err, there is a macro wait_event in include/linux/wait.h.
+	 * Avoid unwanted macro expansion. */
+	void (*emit_clip_rect) (struct drm_savage_private * dev_priv,
+				const struct drm_clip_rect * pbox);
+	void (*dma_flush) (struct drm_savage_private * dev_priv);
+} drm_savage_private_t;
+
+/* ioctls */
+extern int savage_bci_cmdbuf(struct drm_device *dev, void *data, struct drm_file *file_priv);
+extern int savage_bci_buffers(struct drm_device *dev, void *data, struct drm_file *file_priv);
+
+/* BCI functions */
+extern uint16_t savage_bci_emit_event(drm_savage_private_t * dev_priv,
+				      unsigned int flags);
+extern void savage_freelist_put(struct drm_device * dev, struct drm_buf * buf);
+extern void savage_dma_reset(drm_savage_private_t * dev_priv);
+extern void savage_dma_wait(drm_savage_private_t * dev_priv, unsigned int page);
+extern uint32_t *savage_dma_alloc(drm_savage_private_t * dev_priv,
+				  unsigned int n);
+extern int savage_driver_load(struct drm_device *dev, unsigned long chipset);
+extern int savage_driver_firstopen(struct drm_device *dev);
+extern void savage_driver_lastclose(struct drm_device *dev);
+extern void savage_driver_unload(struct drm_device *dev);
+extern void savage_reclaim_buffers(struct drm_device *dev,
+				   struct drm_file *file_priv);
+
+/* state functions */
+extern void savage_emit_clip_rect_s3d(drm_savage_private_t * dev_priv,
+				      const struct drm_clip_rect * pbox);
+extern void savage_emit_clip_rect_s4(drm_savage_private_t * dev_priv,
+				     const struct drm_clip_rect * pbox);
+
+#define SAVAGE_FB_SIZE_S3	0x01000000	/*  16MB */
+#define SAVAGE_FB_SIZE_S4	0x02000000	/*  32MB */
+#define SAVAGE_MMIO_SIZE        0x00080000	/* 512kB */
+#define SAVAGE_APERTURE_OFFSET  0x02000000	/*  32MB */
+#define SAVAGE_APERTURE_SIZE    0x05000000	/* 5 tiled surfaces, 16MB each */
+
+#define SAVAGE_BCI_OFFSET       0x00010000	/* offset of the BCI region
+						 * inside the MMIO region */
+#define SAVAGE_BCI_FIFO_SIZE	32	/* number of entries in on-chip
+					 * BCI FIFO */
+
+/*
+ * MMIO registers
+ */
+#define SAVAGE_STATUS_WORD0		0x48C00
+#define SAVAGE_STATUS_WORD1		0x48C04
+#define SAVAGE_ALT_STATUS_WORD0 	0x48C60
+
+#define SAVAGE_FIFO_USED_MASK_S3D	0x0001ffff
+#define SAVAGE_FIFO_USED_MASK_S4	0x001fffff
+
+/* Copied from savage_bci.h in the 2D driver with some renaming. */
+
+/* Bitmap descriptors */
+#define SAVAGE_BD_STRIDE_SHIFT 0
+#define SAVAGE_BD_BPP_SHIFT   16
+#define SAVAGE_BD_TILE_SHIFT  24
+#define SAVAGE_BD_BW_DISABLE  (1<<28)
+/* common: */
+#define	SAVAGE_BD_TILE_LINEAR		0
+/* savage4, MX, IX, 3D */
+#define	SAVAGE_BD_TILE_16BPP		2
+#define	SAVAGE_BD_TILE_32BPP		3
+/* twister, prosavage, DDR, supersavage, 2000 */
+#define	SAVAGE_BD_TILE_DEST		1
+#define	SAVAGE_BD_TILE_TEXTURE		2
+/* GBD - BCI enable */
+/* savage4, MX, IX, 3D */
+#define SAVAGE_GBD_BCI_ENABLE                    8
+/* twister, prosavage, DDR, supersavage, 2000 */
+#define SAVAGE_GBD_BCI_ENABLE_TWISTER            0
+
+#define SAVAGE_GBD_BIG_ENDIAN                    4
+#define SAVAGE_GBD_LITTLE_ENDIAN                 0
+#define SAVAGE_GBD_64                            1
+
+/*  Global Bitmap Descriptor */
+#define SAVAGE_BCI_GLB_BD_LOW             0x8168
+#define SAVAGE_BCI_GLB_BD_HIGH            0x816C
+
+/*
+ * BCI registers
+ */
+/* Savage4/Twister/ProSavage 3D registers */
+#define SAVAGE_DRAWLOCALCTRL_S4		0x1e
+#define SAVAGE_TEXPALADDR_S4		0x1f
+#define SAVAGE_TEXCTRL0_S4		0x20
+#define SAVAGE_TEXCTRL1_S4		0x21
+#define SAVAGE_TEXADDR0_S4		0x22
+#define SAVAGE_TEXADDR1_S4		0x23
+#define SAVAGE_TEXBLEND0_S4		0x24
+#define SAVAGE_TEXBLEND1_S4		0x25
+#define SAVAGE_TEXXPRCLR_S4		0x26	/* never used */
+#define SAVAGE_TEXDESCR_S4		0x27
+#define SAVAGE_FOGTABLE_S4		0x28
+#define SAVAGE_FOGCTRL_S4		0x30
+#define SAVAGE_STENCILCTRL_S4		0x31
+#define SAVAGE_ZBUFCTRL_S4		0x32
+#define SAVAGE_ZBUFOFF_S4		0x33
+#define SAVAGE_DESTCTRL_S4		0x34
+#define SAVAGE_DRAWCTRL0_S4		0x35
+#define SAVAGE_DRAWCTRL1_S4		0x36
+#define SAVAGE_ZWATERMARK_S4		0x37
+#define SAVAGE_DESTTEXRWWATERMARK_S4	0x38
+#define SAVAGE_TEXBLENDCOLOR_S4		0x39
+/* Savage3D/MX/IX 3D registers */
+#define SAVAGE_TEXPALADDR_S3D		0x18
+#define SAVAGE_TEXXPRCLR_S3D		0x19	/* never used */
+#define SAVAGE_TEXADDR_S3D		0x1A
+#define SAVAGE_TEXDESCR_S3D		0x1B
+#define SAVAGE_TEXCTRL_S3D		0x1C
+#define SAVAGE_FOGTABLE_S3D		0x20
+#define SAVAGE_FOGCTRL_S3D		0x30
+#define SAVAGE_DRAWCTRL_S3D		0x31
+#define SAVAGE_ZBUFCTRL_S3D		0x32
+#define SAVAGE_ZBUFOFF_S3D		0x33
+#define SAVAGE_DESTCTRL_S3D		0x34
+#define SAVAGE_SCSTART_S3D		0x35
+#define SAVAGE_SCEND_S3D		0x36
+#define SAVAGE_ZWATERMARK_S3D		0x37
+#define SAVAGE_DESTTEXRWWATERMARK_S3D	0x38
+/* common stuff */
+#define SAVAGE_VERTBUFADDR		0x3e
+#define SAVAGE_BITPLANEWTMASK		0xd7
+#define SAVAGE_DMABUFADDR		0x51
+
+/* texture enable bits (needed for tex addr checking) */
+#define SAVAGE_TEXCTRL_TEXEN_MASK	0x00010000	/* S3D */
+#define SAVAGE_TEXDESCR_TEX0EN_MASK	0x02000000	/* S4 */
+#define SAVAGE_TEXDESCR_TEX1EN_MASK	0x04000000	/* S4 */
+
+/* Global fields in Savage4/Twister/ProSavage 3D registers:
+ *
+ * All texture registers and DrawLocalCtrl are local. All other
+ * registers are global. */
+
+/* Global fields in Savage3D/MX/IX 3D registers:
+ *
+ * All texture registers are local. DrawCtrl and ZBufCtrl are
+ * partially local. All other registers are global.
+ *
+ * DrawCtrl global fields: cullMode, alphaTestCmpFunc, alphaTestEn, alphaRefVal
+ * ZBufCtrl global fields: zCmpFunc, zBufEn
+ */
+#define SAVAGE_DRAWCTRL_S3D_GLOBAL	0x03f3c00c
+#define SAVAGE_ZBUFCTRL_S3D_GLOBAL	0x00000027
+
+/* Masks for scissor bits (drawCtrl[01] on s4, scissorStart/End on s3d)
+ */
+#define SAVAGE_SCISSOR_MASK_S4		0x00fff7ff
+#define SAVAGE_SCISSOR_MASK_S3D		0x07ff07ff
+
+/*
+ * BCI commands
+ */
+#define BCI_CMD_NOP                  0x40000000
+#define BCI_CMD_RECT                 0x48000000
+#define BCI_CMD_RECT_XP              0x01000000
+#define BCI_CMD_RECT_YP              0x02000000
+#define BCI_CMD_SCANLINE             0x50000000
+#define BCI_CMD_LINE                 0x5C000000
+#define BCI_CMD_LINE_LAST_PIXEL      0x58000000
+#define BCI_CMD_BYTE_TEXT            0x63000000
+#define BCI_CMD_NT_BYTE_TEXT         0x67000000
+#define BCI_CMD_BIT_TEXT             0x6C000000
+#define BCI_CMD_GET_ROP(cmd)         (((cmd) >> 16) & 0xFF)
+#define BCI_CMD_SET_ROP(cmd, rop)    ((cmd) |= ((rop & 0xFF) << 16))
+#define BCI_CMD_SEND_COLOR           0x00008000
+
+#define BCI_CMD_CLIP_NONE            0x00000000
+#define BCI_CMD_CLIP_CURRENT         0x00002000
+#define BCI_CMD_CLIP_LR              0x00004000
+#define BCI_CMD_CLIP_NEW             0x00006000
+
+#define BCI_CMD_DEST_GBD             0x00000000
+#define BCI_CMD_DEST_PBD             0x00000800
+#define BCI_CMD_DEST_PBD_NEW         0x00000C00
+#define BCI_CMD_DEST_SBD             0x00001000
+#define BCI_CMD_DEST_SBD_NEW         0x00001400
+
+#define BCI_CMD_SRC_TRANSPARENT      0x00000200
+#define BCI_CMD_SRC_SOLID            0x00000000
+#define BCI_CMD_SRC_GBD              0x00000020
+#define BCI_CMD_SRC_COLOR            0x00000040
+#define BCI_CMD_SRC_MONO             0x00000060
+#define BCI_CMD_SRC_PBD_COLOR        0x00000080
+#define BCI_CMD_SRC_PBD_MONO         0x000000A0
+#define BCI_CMD_SRC_PBD_COLOR_NEW    0x000000C0
+#define BCI_CMD_SRC_PBD_MONO_NEW     0x000000E0
+#define BCI_CMD_SRC_SBD_COLOR        0x00000100
+#define BCI_CMD_SRC_SBD_MONO         0x00000120
+#define BCI_CMD_SRC_SBD_COLOR_NEW    0x00000140
+#define BCI_CMD_SRC_SBD_MONO_NEW     0x00000160
+
+#define BCI_CMD_PAT_TRANSPARENT      0x00000010
+#define BCI_CMD_PAT_NONE             0x00000000
+#define BCI_CMD_PAT_COLOR            0x00000002
+#define BCI_CMD_PAT_MONO             0x00000003
+#define BCI_CMD_PAT_PBD_COLOR        0x00000004
+#define BCI_CMD_PAT_PBD_MONO         0x00000005
+#define BCI_CMD_PAT_PBD_COLOR_NEW    0x00000006
+#define BCI_CMD_PAT_PBD_MONO_NEW     0x00000007
+#define BCI_CMD_PAT_SBD_COLOR        0x00000008
+#define BCI_CMD_PAT_SBD_MONO         0x00000009
+#define BCI_CMD_PAT_SBD_COLOR_NEW    0x0000000A
+#define BCI_CMD_PAT_SBD_MONO_NEW     0x0000000B
+
+#define BCI_BD_BW_DISABLE            0x10000000
+#define BCI_BD_TILE_MASK             0x03000000
+#define BCI_BD_TILE_NONE             0x00000000
+#define BCI_BD_TILE_16               0x02000000
+#define BCI_BD_TILE_32               0x03000000
+#define BCI_BD_GET_BPP(bd)           (((bd) >> 16) & 0xFF)
+#define BCI_BD_SET_BPP(bd, bpp)      ((bd) |= (((bpp) & 0xFF) << 16))
+#define BCI_BD_GET_STRIDE(bd)        ((bd) & 0xFFFF)
+#define BCI_BD_SET_STRIDE(bd, st)    ((bd) |= ((st) & 0xFFFF))
+
+#define BCI_CMD_SET_REGISTER            0x96000000
+
+#define BCI_CMD_WAIT                    0xC0000000
+#define BCI_CMD_WAIT_3D                 0x00010000
+#define BCI_CMD_WAIT_2D                 0x00020000
+
+#define BCI_CMD_UPDATE_EVENT_TAG        0x98000000
+
+#define BCI_CMD_DRAW_PRIM               0x80000000
+#define BCI_CMD_DRAW_INDEXED_PRIM       0x88000000
+#define BCI_CMD_DRAW_CONT               0x01000000
+#define BCI_CMD_DRAW_TRILIST            0x00000000
+#define BCI_CMD_DRAW_TRISTRIP           0x02000000
+#define BCI_CMD_DRAW_TRIFAN             0x04000000
+#define BCI_CMD_DRAW_SKIPFLAGS          0x000000ff
+#define BCI_CMD_DRAW_NO_Z		0x00000001
+#define BCI_CMD_DRAW_NO_W		0x00000002
+#define BCI_CMD_DRAW_NO_CD		0x00000004
+#define BCI_CMD_DRAW_NO_CS		0x00000008
+#define BCI_CMD_DRAW_NO_U0		0x00000010
+#define BCI_CMD_DRAW_NO_V0		0x00000020
+#define BCI_CMD_DRAW_NO_UV0		0x00000030
+#define BCI_CMD_DRAW_NO_U1		0x00000040
+#define BCI_CMD_DRAW_NO_V1		0x00000080
+#define BCI_CMD_DRAW_NO_UV1		0x000000c0
+
+#define BCI_CMD_DMA			0xa8000000
+
+#define BCI_W_H(w, h)                ((((h) << 16) | (w)) & 0x0FFF0FFF)
+#define BCI_X_Y(x, y)                ((((y) << 16) | (x)) & 0x0FFF0FFF)
+#define BCI_X_W(x, y)                ((((w) << 16) | (x)) & 0x0FFF0FFF)
+#define BCI_CLIP_LR(l, r)            ((((r) << 16) | (l)) & 0x0FFF0FFF)
+#define BCI_CLIP_TL(t, l)            ((((t) << 16) | (l)) & 0x0FFF0FFF)
+#define BCI_CLIP_BR(b, r)            ((((b) << 16) | (r)) & 0x0FFF0FFF)
+
+#define BCI_LINE_X_Y(x, y)           (((y) << 16) | ((x) & 0xFFFF))
+#define BCI_LINE_STEPS(diag, axi)    (((axi) << 16) | ((diag) & 0xFFFF))
+#define BCI_LINE_MISC(maj, ym, xp, yp, err) \
+	(((maj) & 0x1FFF) | \
+	((ym) ? 1<<13 : 0) | \
+	((xp) ? 1<<14 : 0) | \
+	((yp) ? 1<<15 : 0) | \
+	((err) << 16))
+
+/*
+ * common commands
+ */
+#define BCI_SET_REGISTERS( first, n )			\
+	BCI_WRITE(BCI_CMD_SET_REGISTER |		\
+		  ((uint32_t)(n) & 0xff) << 16 |	\
+		  ((uint32_t)(first) & 0xffff))
+#define DMA_SET_REGISTERS( first, n )			\
+	DMA_WRITE(BCI_CMD_SET_REGISTER |		\
+		  ((uint32_t)(n) & 0xff) << 16 |	\
+		  ((uint32_t)(first) & 0xffff))
+
+#define BCI_DRAW_PRIMITIVE(n, type, skip)         \
+        BCI_WRITE(BCI_CMD_DRAW_PRIM | (type) | (skip) | \
+		  ((n) << 16))
+#define DMA_DRAW_PRIMITIVE(n, type, skip)         \
+        DMA_WRITE(BCI_CMD_DRAW_PRIM | (type) | (skip) | \
+		  ((n) << 16))
+
+#define BCI_DRAW_INDICES_S3D(n, type, i0)         \
+        BCI_WRITE(BCI_CMD_DRAW_INDEXED_PRIM | (type) |  \
+		  ((n) << 16) | (i0))
+
+#define BCI_DRAW_INDICES_S4(n, type, skip)        \
+        BCI_WRITE(BCI_CMD_DRAW_INDEXED_PRIM | (type) |  \
+                  (skip) | ((n) << 16))
+
+#define BCI_DMA(n)	\
+	BCI_WRITE(BCI_CMD_DMA | (((n) >> 1) - 1))
+
+/*
+ * access to MMIO
+ */
+#define SAVAGE_READ(reg) \
+       readl(((void __iomem *)dev_priv->mmio->handle) + (reg))
+#define SAVAGE_WRITE(reg) \
+	writel(val, ((void __iomem *)dev_priv->mmio->handle) + (reg))
+
+/*
+ * access to the burst command interface (BCI)
+ */
+#define SAVAGE_BCI_DEBUG 1
+
+#define BCI_LOCALS    volatile uint32_t *bci_ptr;
+
+#define BEGIN_BCI( n ) do {			\
+	dev_priv->wait_fifo(dev_priv, (n));	\
+	bci_ptr = dev_priv->bci_ptr;		\
+} while(0)
+
+#define BCI_WRITE( val ) *bci_ptr++ = (uint32_t)(val)
+
+/*
+ * command DMA support
+ */
+#define SAVAGE_DMA_DEBUG 1
+
+#define DMA_LOCALS   uint32_t *dma_ptr;
+
+#define BEGIN_DMA( n ) do {						\
+	unsigned int cur = dev_priv->current_dma_page;			\
+	unsigned int rest = SAVAGE_DMA_PAGE_SIZE -			\
+		dev_priv->dma_pages[cur].used;				\
+	if ((n) > rest) {						\
+		dma_ptr = savage_dma_alloc(dev_priv, (n));		\
+	} else { /* fast path for small allocations */			\
+		dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle +	\
+			cur * SAVAGE_DMA_PAGE_SIZE +			\
+			dev_priv->dma_pages[cur].used;			\
+		if (dev_priv->dma_pages[cur].used == 0)			\
+			savage_dma_wait(dev_priv, cur);			\
+		dev_priv->dma_pages[cur].used += (n);			\
+	}								\
+} while(0)
+
+#define DMA_WRITE( val ) *dma_ptr++ = (uint32_t)(val)
+
+#define DMA_COPY(src, n) do {					\
+	memcpy(dma_ptr, (src), (n)*4);				\
+	dma_ptr += n;						\
+} while(0)
+
+#if SAVAGE_DMA_DEBUG
+#define DMA_COMMIT() do {						\
+	unsigned int cur = dev_priv->current_dma_page;			\
+	uint32_t *expected = (uint32_t *)dev_priv->cmd_dma->handle +	\
+			cur * SAVAGE_DMA_PAGE_SIZE +			\
+			dev_priv->dma_pages[cur].used;			\
+	if (dma_ptr != expected) {					\
+		DRM_ERROR("DMA allocation and use don't match: "	\
+			  "%p != %p\n", expected, dma_ptr);		\
+		savage_dma_reset(dev_priv);				\
+	}								\
+} while(0)
+#else
+#define DMA_COMMIT() do {/* nothing */} while(0)
+#endif
+
+#define DMA_FLUSH() dev_priv->dma_flush(dev_priv)
+
+/* Buffer aging via event tag
+ */
+
+#define UPDATE_EVENT_COUNTER( ) do {			\
+	if (dev_priv->status_ptr) {			\
+		uint16_t count;				\
+		/* coordinate with Xserver */		\
+		count = dev_priv->status_ptr[1023];	\
+		if (count < dev_priv->event_counter)	\
+			dev_priv->event_wrap++;		\
+		dev_priv->event_counter = count;	\
+	}						\
+} while(0)
+
+#define SET_AGE( age, e, w ) do {	\
+	(age)->event = e;		\
+	(age)->wrap = w;		\
+} while(0)
+
+#define TEST_AGE( age, e, w )				\
+	( (age)->wrap < (w) || ( (age)->wrap == (w) && (age)->event <= (e) ) )
+
+#endif				/* __SAVAGE_DRV_H__ */