Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 733 insertions, 0 deletions

diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
new file mode 100644
index 000000000..799ab7460
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Free Electrons
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <drm/drm_device.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_plane.h>
+
+#include "sun4i_drv.h"
+#include "sun4i_frontend.h"
+
+static const u32 sun4i_frontend_vert_coef[32] = {
+	0x00004000, 0x000140ff, 0x00033ffe, 0x00043ffd,
+	0x00063efc, 0xff083dfc, 0x000a3bfb, 0xff0d39fb,
+	0xff0f37fb, 0xff1136fa, 0xfe1433fb, 0xfe1631fb,
+	0xfd192ffb, 0xfd1c2cfb, 0xfd1f29fb, 0xfc2127fc,
+	0xfc2424fc, 0xfc2721fc, 0xfb291ffd, 0xfb2c1cfd,
+	0xfb2f19fd, 0xfb3116fe, 0xfb3314fe, 0xfa3611ff,
+	0xfb370fff, 0xfb390dff, 0xfb3b0a00, 0xfc3d08ff,
+	0xfc3e0600, 0xfd3f0400, 0xfe3f0300, 0xff400100,
+};
+
+static const u32 sun4i_frontend_horz_coef[64] = {
+	0x40000000, 0x00000000, 0x40fe0000, 0x0000ff03,
+	0x3ffd0000, 0x0000ff05, 0x3ffc0000, 0x0000ff06,
+	0x3efb0000, 0x0000ff08, 0x3dfb0000, 0x0000ff09,
+	0x3bfa0000, 0x0000fe0d, 0x39fa0000, 0x0000fe0f,
+	0x38fa0000, 0x0000fe10, 0x36fa0000, 0x0000fe12,
+	0x33fa0000, 0x0000fd16, 0x31fa0000, 0x0000fd18,
+	0x2ffa0000, 0x0000fd1a, 0x2cfa0000, 0x0000fc1e,
+	0x29fa0000, 0x0000fc21, 0x27fb0000, 0x0000fb23,
+	0x24fb0000, 0x0000fb26, 0x21fb0000, 0x0000fb29,
+	0x1ffc0000, 0x0000fa2b, 0x1cfc0000, 0x0000fa2e,
+	0x19fd0000, 0x0000fa30, 0x16fd0000, 0x0000fa33,
+	0x14fd0000, 0x0000fa35, 0x11fe0000, 0x0000fa37,
+	0x0ffe0000, 0x0000fa39, 0x0dfe0000, 0x0000fa3b,
+	0x0afe0000, 0x0000fa3e, 0x08ff0000, 0x0000fb3e,
+	0x06ff0000, 0x0000fb40, 0x05ff0000, 0x0000fc40,
+	0x03ff0000, 0x0000fd41, 0x01ff0000, 0x0000fe42,
+};
+
+/*
+ * These coefficients are taken from the A33 BSP from Allwinner.
+ *
+ * The first three values of each row are coded as 13-bit signed fixed-point
+ * numbers, with 10 bits for the fractional part. The fourth value is a
+ * constant coded as a 14-bit signed fixed-point number with 4 bits for the
+ * fractional part.
+ *
+ * The values in table order give the following colorspace translation:
+ * G = 1.164 * Y - 0.391 * U - 0.813 * V + 135
+ * R = 1.164 * Y + 1.596 * V - 222
+ * B = 1.164 * Y + 2.018 * U + 276
+ *
+ * This seems to be a conversion from Y[16:235] UV[16:240] to RGB[0:255],
+ * following the BT601 spec.
+ */
+const u32 sunxi_bt601_yuv2rgb_coef[12] = {
+	0x000004a7, 0x00001e6f, 0x00001cbf, 0x00000877,
+	0x000004a7, 0x00000000, 0x00000662, 0x00003211,
+	0x000004a7, 0x00000812, 0x00000000, 0x00002eb1,
+};
+EXPORT_SYMBOL(sunxi_bt601_yuv2rgb_coef);
+
+static void sun4i_frontend_scaler_init(struct sun4i_frontend *frontend)
+{
+	int i;
+
+	if (frontend->data->has_coef_access_ctrl)
+		regmap_write_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
+				  SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL,
+				  SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL);
+
+	for (i = 0; i < 32; i++) {
+		regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZCOEF0_REG(i),
+			     sun4i_frontend_horz_coef[2 * i]);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZCOEF0_REG(i),
+			     sun4i_frontend_horz_coef[2 * i]);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZCOEF1_REG(i),
+			     sun4i_frontend_horz_coef[2 * i + 1]);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZCOEF1_REG(i),
+			     sun4i_frontend_horz_coef[2 * i + 1]);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTCOEF_REG(i),
+			     sun4i_frontend_vert_coef[i]);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTCOEF_REG(i),
+			     sun4i_frontend_vert_coef[i]);
+	}
+
+	if (frontend->data->has_coef_rdy)
+		regmap_write_bits(frontend->regs,
+				  SUN4I_FRONTEND_FRM_CTRL_REG,
+				  SUN4I_FRONTEND_FRM_CTRL_COEF_RDY,
+				  SUN4I_FRONTEND_FRM_CTRL_COEF_RDY);
+}
+
+int sun4i_frontend_init(struct sun4i_frontend *frontend)
+{
+	return pm_runtime_get_sync(frontend->dev);
+}
+EXPORT_SYMBOL(sun4i_frontend_init);
+
+void sun4i_frontend_exit(struct sun4i_frontend *frontend)
+{
+	pm_runtime_put(frontend->dev);
+}
+EXPORT_SYMBOL(sun4i_frontend_exit);
+
+static bool sun4i_frontend_format_chroma_requires_swap(uint32_t fmt)
+{
+	switch (fmt) {
+	case DRM_FORMAT_YVU411:
+	case DRM_FORMAT_YVU420:
+	case DRM_FORMAT_YVU422:
+	case DRM_FORMAT_YVU444:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool sun4i_frontend_format_supports_tiling(uint32_t fmt)
+{
+	switch (fmt) {
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_NV16:
+	case DRM_FORMAT_NV21:
+	case DRM_FORMAT_NV61:
+	case DRM_FORMAT_YUV411:
+	case DRM_FORMAT_YUV420:
+	case DRM_FORMAT_YUV422:
+	case DRM_FORMAT_YVU420:
+	case DRM_FORMAT_YVU422:
+	case DRM_FORMAT_YVU411:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
+				  struct drm_plane *plane)
+{
+	struct drm_plane_state *state = plane->state;
+	struct drm_framebuffer *fb = state->fb;
+	unsigned int strides[3] = {};
+
+	dma_addr_t dma_addr;
+	bool swap;
+
+	if (fb->modifier == DRM_FORMAT_MOD_ALLWINNER_TILED) {
+		unsigned int width = state->src_w >> 16;
+		unsigned int offset;
+
+		strides[0] = SUN4I_FRONTEND_LINESTRD_TILED(fb->pitches[0]);
+
+		/*
+		 * The X1 offset is the offset to the bottom-right point in the
+		 * end tile, which is the final pixel (at offset width - 1)
+		 * within the end tile (with a 32-byte mask).
+		 */
+		offset = (width - 1) & (32 - 1);
+
+		regmap_write(frontend->regs, SUN4I_FRONTEND_TB_OFF0_REG,
+			     SUN4I_FRONTEND_TB_OFF_X1(offset));
+
+		if (fb->format->num_planes > 1) {
+			strides[1] =
+				SUN4I_FRONTEND_LINESTRD_TILED(fb->pitches[1]);
+
+			regmap_write(frontend->regs, SUN4I_FRONTEND_TB_OFF1_REG,
+				     SUN4I_FRONTEND_TB_OFF_X1(offset));
+		}
+
+		if (fb->format->num_planes > 2) {
+			strides[2] =
+				SUN4I_FRONTEND_LINESTRD_TILED(fb->pitches[2]);
+
+			regmap_write(frontend->regs, SUN4I_FRONTEND_TB_OFF2_REG,
+				     SUN4I_FRONTEND_TB_OFF_X1(offset));
+		}
+	} else {
+		strides[0] = fb->pitches[0];
+
+		if (fb->format->num_planes > 1)
+			strides[1] = fb->pitches[1];
+
+		if (fb->format->num_planes > 2)
+			strides[2] = fb->pitches[2];
+	}
+
+	/* Set the line width */
+	DRM_DEBUG_DRIVER("Frontend stride: %d bytes\n", fb->pitches[0]);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD0_REG,
+		     strides[0]);
+
+	if (fb->format->num_planes > 1)
+		regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD1_REG,
+			     strides[1]);
+
+	if (fb->format->num_planes > 2)
+		regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD2_REG,
+			     strides[2]);
+
+	/* Some planar formats require chroma channel swapping by hand. */
+	swap = sun4i_frontend_format_chroma_requires_swap(fb->format->format);
+
+	/* Set the physical address of the buffer in memory */
+	dma_addr = drm_fb_dma_get_gem_addr(fb, state, 0);
+	DRM_DEBUG_DRIVER("Setting buffer #0 address to %pad\n", &dma_addr);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG, dma_addr);
+
+	if (fb->format->num_planes > 1) {
+		dma_addr = drm_fb_dma_get_gem_addr(fb, state, swap ? 2 : 1);
+		DRM_DEBUG_DRIVER("Setting buffer #1 address to %pad\n",
+				 &dma_addr);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR1_REG,
+			     dma_addr);
+	}
+
+	if (fb->format->num_planes > 2) {
+		dma_addr = drm_fb_dma_get_gem_addr(fb, state, swap ? 1 : 2);
+		DRM_DEBUG_DRIVER("Setting buffer #2 address to %pad\n",
+				 &dma_addr);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR2_REG,
+			     dma_addr);
+	}
+}
+EXPORT_SYMBOL(sun4i_frontend_update_buffer);
+
+static int
+sun4i_frontend_drm_format_to_input_fmt(const struct drm_format_info *format,
+				       u32 *val)
+{
+	if (!format->is_yuv)
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB;
+	else if (drm_format_info_is_yuv_sampling_411(format))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV411;
+	else if (drm_format_info_is_yuv_sampling_420(format))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420;
+	else if (drm_format_info_is_yuv_sampling_422(format))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422;
+	else if (drm_format_info_is_yuv_sampling_444(format))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV444;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+sun4i_frontend_drm_format_to_input_mode(const struct drm_format_info *format,
+					uint64_t modifier, u32 *val)
+{
+	bool tiled = (modifier == DRM_FORMAT_MOD_ALLWINNER_TILED);
+
+	switch (format->num_planes) {
+	case 1:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PACKED;
+		return 0;
+
+	case 2:
+		*val = tiled ? SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_MB32_SEMIPLANAR
+			     : SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_SEMIPLANAR;
+		return 0;
+
+	case 3:
+		*val = tiled ? SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_MB32_PLANAR
+			     : SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PLANAR;
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int
+sun4i_frontend_drm_format_to_input_sequence(const struct drm_format_info *format,
+					    u32 *val)
+{
+	/* Planar formats have an explicit input sequence. */
+	if (drm_format_info_is_yuv_planar(format)) {
+		*val = 0;
+		return 0;
+	}
+
+	switch (format->format) {
+	case DRM_FORMAT_BGRX8888:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_BGRX;
+		return 0;
+
+	case DRM_FORMAT_NV12:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV;
+		return 0;
+
+	case DRM_FORMAT_NV16:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV;
+		return 0;
+
+	case DRM_FORMAT_NV21:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU;
+		return 0;
+
+	case DRM_FORMAT_NV61:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU;
+		return 0;
+
+	case DRM_FORMAT_UYVY:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UYVY;
+		return 0;
+
+	case DRM_FORMAT_VYUY:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VYUY;
+		return 0;
+
+	case DRM_FORMAT_XRGB8888:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_XRGB;
+		return 0;
+
+	case DRM_FORMAT_YUYV:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YUYV;
+		return 0;
+
+	case DRM_FORMAT_YVYU:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YVYU;
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sun4i_frontend_drm_format_to_output_fmt(uint32_t fmt, u32 *val)
+{
+	switch (fmt) {
+	case DRM_FORMAT_BGRX8888:
+		*val = SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT_BGRX8888;
+		return 0;
+
+	case DRM_FORMAT_XRGB8888:
+		*val = SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT_XRGB8888;
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const uint32_t sun4i_frontend_formats[] = {
+	DRM_FORMAT_BGRX8888,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV21,
+	DRM_FORMAT_NV61,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUV411,
+	DRM_FORMAT_YUV420,
+	DRM_FORMAT_YUV422,
+	DRM_FORMAT_YUV444,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVU411,
+	DRM_FORMAT_YVU420,
+	DRM_FORMAT_YVU422,
+	DRM_FORMAT_YVU444,
+	DRM_FORMAT_YVYU,
+};
+
+bool sun4i_frontend_format_is_supported(uint32_t fmt, uint64_t modifier)
+{
+	unsigned int i;
+
+	if (modifier == DRM_FORMAT_MOD_ALLWINNER_TILED)
+		return sun4i_frontend_format_supports_tiling(fmt);
+	else if (modifier != DRM_FORMAT_MOD_LINEAR)
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(sun4i_frontend_formats); i++)
+		if (sun4i_frontend_formats[i] == fmt)
+			return true;
+
+	return false;
+}
+EXPORT_SYMBOL(sun4i_frontend_format_is_supported);
+
+int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
+				  struct drm_plane *plane, uint32_t out_fmt)
+{
+	struct drm_plane_state *state = plane->state;
+	struct drm_framebuffer *fb = state->fb;
+	const struct drm_format_info *format = fb->format;
+	uint64_t modifier = fb->modifier;
+	unsigned int ch1_phase_idx;
+	u32 out_fmt_val;
+	u32 in_fmt_val, in_mod_val, in_ps_val;
+	unsigned int i;
+	u32 bypass;
+	int ret;
+
+	ret = sun4i_frontend_drm_format_to_input_fmt(format, &in_fmt_val);
+	if (ret) {
+		DRM_DEBUG_DRIVER("Invalid input format\n");
+		return ret;
+	}
+
+	ret = sun4i_frontend_drm_format_to_input_mode(format, modifier,
+						      &in_mod_val);
+	if (ret) {
+		DRM_DEBUG_DRIVER("Invalid input mode\n");
+		return ret;
+	}
+
+	ret = sun4i_frontend_drm_format_to_input_sequence(format, &in_ps_val);
+	if (ret) {
+		DRM_DEBUG_DRIVER("Invalid pixel sequence\n");
+		return ret;
+	}
+
+	ret = sun4i_frontend_drm_format_to_output_fmt(out_fmt, &out_fmt_val);
+	if (ret) {
+		DRM_DEBUG_DRIVER("Invalid output format\n");
+		return ret;
+	}
+
+	/*
+	 * I have no idea what this does exactly, but it seems to be
+	 * related to the scaler FIR filter phase parameters.
+	 */
+	ch1_phase_idx = (format->num_planes > 1) ? 1 : 0;
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZPHASE_REG,
+		     frontend->data->ch_phase[0]);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZPHASE_REG,
+		     frontend->data->ch_phase[ch1_phase_idx]);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE0_REG,
+		     frontend->data->ch_phase[0]);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE0_REG,
+		     frontend->data->ch_phase[ch1_phase_idx]);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE1_REG,
+		     frontend->data->ch_phase[0]);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE1_REG,
+		     frontend->data->ch_phase[ch1_phase_idx]);
+
+	/*
+	 * Checking the input format is sufficient since we currently only
+	 * support RGB output formats to the backend. If YUV output formats
+	 * ever get supported, an YUV input and output would require bypassing
+	 * the CSC engine too.
+	 */
+	if (format->is_yuv) {
+		/* Setup the CSC engine for YUV to RGB conversion. */
+		bypass = 0;
+
+		for (i = 0; i < ARRAY_SIZE(sunxi_bt601_yuv2rgb_coef); i++)
+			regmap_write(frontend->regs,
+				     SUN4I_FRONTEND_CSC_COEF_REG(i),
+				     sunxi_bt601_yuv2rgb_coef[i]);
+	} else {
+		bypass = SUN4I_FRONTEND_BYPASS_CSC_EN;
+	}
+
+	regmap_update_bits(frontend->regs, SUN4I_FRONTEND_BYPASS_REG,
+			   SUN4I_FRONTEND_BYPASS_CSC_EN, bypass);
+
+	regmap_write(frontend->regs, SUN4I_FRONTEND_INPUT_FMT_REG,
+		     in_mod_val | in_fmt_val | in_ps_val);
+
+	/*
+	 * TODO: It look like the A31 and A80 at least will need the
+	 * bit 7 (ALPHA_EN) enabled when using a format with alpha (so
+	 * ARGB8888).
+	 */
+	regmap_write(frontend->regs, SUN4I_FRONTEND_OUTPUT_FMT_REG,
+		     out_fmt_val);
+
+	return 0;
+}
+EXPORT_SYMBOL(sun4i_frontend_update_formats);
+
+void sun4i_frontend_update_coord(struct sun4i_frontend *frontend,
+				 struct drm_plane *plane)
+{
+	struct drm_plane_state *state = plane->state;
+	struct drm_framebuffer *fb = state->fb;
+	uint32_t luma_width, luma_height;
+	uint32_t chroma_width, chroma_height;
+
+	/* Set height and width */
+	DRM_DEBUG_DRIVER("Frontend size W: %u H: %u\n",
+			 state->crtc_w, state->crtc_h);
+
+	luma_width = state->src_w >> 16;
+	luma_height = state->src_h >> 16;
+
+	chroma_width = DIV_ROUND_UP(luma_width, fb->format->hsub);
+	chroma_height = DIV_ROUND_UP(luma_height, fb->format->vsub);
+
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_INSIZE_REG,
+		     SUN4I_FRONTEND_INSIZE(luma_height, luma_width));
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_INSIZE_REG,
+		     SUN4I_FRONTEND_INSIZE(chroma_height, chroma_width));
+
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_OUTSIZE_REG,
+		     SUN4I_FRONTEND_OUTSIZE(state->crtc_h, state->crtc_w));
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_OUTSIZE_REG,
+		     SUN4I_FRONTEND_OUTSIZE(state->crtc_h, state->crtc_w));
+
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZFACT_REG,
+		     (luma_width << 16) / state->crtc_w);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZFACT_REG,
+		     (chroma_width << 16) / state->crtc_w);
+
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTFACT_REG,
+		     (luma_height << 16) / state->crtc_h);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTFACT_REG,
+		     (chroma_height << 16) / state->crtc_h);
+
+	regmap_write_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
+			  SUN4I_FRONTEND_FRM_CTRL_REG_RDY,
+			  SUN4I_FRONTEND_FRM_CTRL_REG_RDY);
+}
+EXPORT_SYMBOL(sun4i_frontend_update_coord);
+
+int sun4i_frontend_enable(struct sun4i_frontend *frontend)
+{
+	regmap_write_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
+			  SUN4I_FRONTEND_FRM_CTRL_FRM_START,
+			  SUN4I_FRONTEND_FRM_CTRL_FRM_START);
+
+	return 0;
+}
+EXPORT_SYMBOL(sun4i_frontend_enable);
+
+static const struct regmap_config sun4i_frontend_regmap_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= 0x0a14,
+};
+
+static int sun4i_frontend_bind(struct device *dev, struct device *master,
+			 void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sun4i_frontend *frontend;
+	struct drm_device *drm = data;
+	struct sun4i_drv *drv = drm->dev_private;
+	void __iomem *regs;
+
+	frontend = devm_kzalloc(dev, sizeof(*frontend), GFP_KERNEL);
+	if (!frontend)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, frontend);
+	frontend->dev = dev;
+	frontend->node = dev->of_node;
+
+	frontend->data = of_device_get_match_data(dev);
+	if (!frontend->data)
+		return -ENODEV;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	frontend->regs = devm_regmap_init_mmio(dev, regs,
+					       &sun4i_frontend_regmap_config);
+	if (IS_ERR(frontend->regs)) {
+		dev_err(dev, "Couldn't create the frontend regmap\n");
+		return PTR_ERR(frontend->regs);
+	}
+
+	frontend->reset = devm_reset_control_get(dev, NULL);
+	if (IS_ERR(frontend->reset)) {
+		dev_err(dev, "Couldn't get our reset line\n");
+		return PTR_ERR(frontend->reset);
+	}
+
+	frontend->bus_clk = devm_clk_get(dev, "ahb");
+	if (IS_ERR(frontend->bus_clk)) {
+		dev_err(dev, "Couldn't get our bus clock\n");
+		return PTR_ERR(frontend->bus_clk);
+	}
+
+	frontend->mod_clk = devm_clk_get(dev, "mod");
+	if (IS_ERR(frontend->mod_clk)) {
+		dev_err(dev, "Couldn't get our mod clock\n");
+		return PTR_ERR(frontend->mod_clk);
+	}
+
+	frontend->ram_clk = devm_clk_get(dev, "ram");
+	if (IS_ERR(frontend->ram_clk)) {
+		dev_err(dev, "Couldn't get our ram clock\n");
+		return PTR_ERR(frontend->ram_clk);
+	}
+
+	list_add_tail(&frontend->list, &drv->frontend_list);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static void sun4i_frontend_unbind(struct device *dev, struct device *master,
+			    void *data)
+{
+	struct sun4i_frontend *frontend = dev_get_drvdata(dev);
+
+	list_del(&frontend->list);
+	pm_runtime_force_suspend(dev);
+}
+
+static const struct component_ops sun4i_frontend_ops = {
+	.bind	= sun4i_frontend_bind,
+	.unbind	= sun4i_frontend_unbind,
+};
+
+static int sun4i_frontend_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &sun4i_frontend_ops);
+}
+
+static int sun4i_frontend_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &sun4i_frontend_ops);
+
+	return 0;
+}
+
+static int sun4i_frontend_runtime_resume(struct device *dev)
+{
+	struct sun4i_frontend *frontend = dev_get_drvdata(dev);
+	int ret;
+
+	clk_set_rate(frontend->mod_clk, 300000000);
+
+	clk_prepare_enable(frontend->bus_clk);
+	clk_prepare_enable(frontend->mod_clk);
+	clk_prepare_enable(frontend->ram_clk);
+
+	ret = reset_control_reset(frontend->reset);
+	if (ret) {
+		dev_err(dev, "Couldn't reset our device\n");
+		return ret;
+	}
+
+	regmap_update_bits(frontend->regs, SUN4I_FRONTEND_EN_REG,
+			   SUN4I_FRONTEND_EN_EN,
+			   SUN4I_FRONTEND_EN_EN);
+
+	sun4i_frontend_scaler_init(frontend);
+
+	return 0;
+}
+
+static int sun4i_frontend_runtime_suspend(struct device *dev)
+{
+	struct sun4i_frontend *frontend = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(frontend->ram_clk);
+	clk_disable_unprepare(frontend->mod_clk);
+	clk_disable_unprepare(frontend->bus_clk);
+
+	reset_control_assert(frontend->reset);
+
+	return 0;
+}
+
+static const struct dev_pm_ops sun4i_frontend_pm_ops = {
+	.runtime_resume		= sun4i_frontend_runtime_resume,
+	.runtime_suspend	= sun4i_frontend_runtime_suspend,
+};
+
+static const struct sun4i_frontend_data sun4i_a10_frontend = {
+	.ch_phase		= { 0x000, 0xfc000 },
+	.has_coef_rdy		= true,
+};
+
+static const struct sun4i_frontend_data sun8i_a33_frontend = {
+	.ch_phase		= { 0x400, 0xfc400 },
+	.has_coef_access_ctrl	= true,
+};
+
+const struct of_device_id sun4i_frontend_of_table[] = {
+	{
+		.compatible = "allwinner,sun4i-a10-display-frontend",
+		.data = &sun4i_a10_frontend
+	},
+	{
+		.compatible = "allwinner,sun7i-a20-display-frontend",
+		.data = &sun4i_a10_frontend
+	},
+	{
+		.compatible = "allwinner,sun8i-a23-display-frontend",
+		.data = &sun8i_a33_frontend
+	},
+	{
+		.compatible = "allwinner,sun8i-a33-display-frontend",
+		.data = &sun8i_a33_frontend
+	},
+	{ }
+};
+EXPORT_SYMBOL(sun4i_frontend_of_table);
+MODULE_DEVICE_TABLE(of, sun4i_frontend_of_table);
+
+static struct platform_driver sun4i_frontend_driver = {
+	.probe		= sun4i_frontend_probe,
+	.remove		= sun4i_frontend_remove,
+	.driver		= {
+		.name		= "sun4i-frontend",
+		.of_match_table	= sun4i_frontend_of_table,
+		.pm		= &sun4i_frontend_pm_ops,
+	},
+};
+module_platform_driver(sun4i_frontend_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A10 Display Engine Frontend Driver");
+MODULE_LICENSE("GPL");