Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 589 insertions, 0 deletions

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
new file mode 100644
index 000000000..92c07e31d
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Broadcom
+ */
+
+/**
+ * DOC: VC4 SDTV module
+ *
+ * The VEC encoder generates PAL or NTSC composite video output.
+ *
+ * TV mode selection is done by an atomic property on the encoder,
+ * because a drm_mode_modeinfo is insufficient to distinguish between
+ * PAL and PAL-M or NTSC and NTSC-J.
+ */
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+
+/* WSE Registers */
+#define VEC_WSE_RESET			0xc0
+
+#define VEC_WSE_CONTROL			0xc4
+#define VEC_WSE_WSS_ENABLE		BIT(7)
+
+#define VEC_WSE_WSS_DATA		0xc8
+#define VEC_WSE_VPS_DATA1		0xcc
+#define VEC_WSE_VPS_CONTROL		0xd0
+
+/* VEC Registers */
+#define VEC_REVID			0x100
+
+#define VEC_CONFIG0			0x104
+#define VEC_CONFIG0_YDEL_MASK		GENMASK(28, 26)
+#define VEC_CONFIG0_YDEL(x)		((x) << 26)
+#define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
+#define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_PBPR_FIL		BIT(18)
+#define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
+#define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
+#define VEC_CONFIG0_CHROMA_GAIN_1_32	(1 << 16)
+#define VEC_CONFIG0_CHROMA_GAIN_1_16	(2 << 16)
+#define VEC_CONFIG0_CHROMA_GAIN_1_8	(3 << 16)
+#define VEC_CONFIG0_CBURST_GAIN_MASK	GENMASK(14, 13)
+#define VEC_CONFIG0_CBURST_GAIN_UNITY	(0 << 13)
+#define VEC_CONFIG0_CBURST_GAIN_1_128	(1 << 13)
+#define VEC_CONFIG0_CBURST_GAIN_1_64	(2 << 13)
+#define VEC_CONFIG0_CBURST_GAIN_1_32	(3 << 13)
+#define VEC_CONFIG0_CHRBW1		BIT(11)
+#define VEC_CONFIG0_CHRBW0		BIT(10)
+#define VEC_CONFIG0_SYNCDIS		BIT(9)
+#define VEC_CONFIG0_BURDIS		BIT(8)
+#define VEC_CONFIG0_CHRDIS		BIT(7)
+#define VEC_CONFIG0_PDEN		BIT(6)
+#define VEC_CONFIG0_YCDELAY		BIT(4)
+#define VEC_CONFIG0_RAMPEN		BIT(2)
+#define VEC_CONFIG0_YCDIS		BIT(2)
+#define VEC_CONFIG0_STD_MASK		GENMASK(1, 0)
+#define VEC_CONFIG0_NTSC_STD		0
+#define VEC_CONFIG0_PAL_BDGHI_STD	1
+#define VEC_CONFIG0_PAL_M_STD		2
+#define VEC_CONFIG0_PAL_N_STD		3
+
+#define VEC_SCHPH			0x108
+#define VEC_SOFT_RESET			0x10c
+#define VEC_CLMP0_START			0x144
+#define VEC_CLMP0_END			0x148
+#define VEC_FREQ3_2			0x180
+#define VEC_FREQ1_0			0x184
+
+#define VEC_CONFIG1			0x188
+#define VEC_CONFIG_VEC_RESYNC_OFF	BIT(18)
+#define VEC_CONFIG_RGB219		BIT(17)
+#define VEC_CONFIG_CBAR_EN		BIT(16)
+#define VEC_CONFIG_TC_OBB		BIT(15)
+#define VEC_CONFIG1_OUTPUT_MODE_MASK	GENMASK(12, 10)
+#define VEC_CONFIG1_C_Y_CVBS		(0 << 10)
+#define VEC_CONFIG1_CVBS_Y_C		(1 << 10)
+#define VEC_CONFIG1_PR_Y_PB		(2 << 10)
+#define VEC_CONFIG1_RGB			(4 << 10)
+#define VEC_CONFIG1_Y_C_CVBS		(5 << 10)
+#define VEC_CONFIG1_C_CVBS_Y		(6 << 10)
+#define VEC_CONFIG1_C_CVBS_CVBS		(7 << 10)
+#define VEC_CONFIG1_DIS_CHR		BIT(9)
+#define VEC_CONFIG1_DIS_LUMA		BIT(8)
+#define VEC_CONFIG1_YCBCR_IN		BIT(6)
+#define VEC_CONFIG1_DITHER_TYPE_LFSR	0
+#define VEC_CONFIG1_DITHER_TYPE_COUNTER	BIT(5)
+#define VEC_CONFIG1_DITHER_EN		BIT(4)
+#define VEC_CONFIG1_CYDELAY		BIT(3)
+#define VEC_CONFIG1_LUMADIS		BIT(2)
+#define VEC_CONFIG1_COMPDIS		BIT(1)
+#define VEC_CONFIG1_CUSTOM_FREQ		BIT(0)
+
+#define VEC_CONFIG2			0x18c
+#define VEC_CONFIG2_PROG_SCAN		BIT(15)
+#define VEC_CONFIG2_SYNC_ADJ_MASK	GENMASK(14, 12)
+#define VEC_CONFIG2_SYNC_ADJ(x)		(((x) / 2) << 12)
+#define VEC_CONFIG2_PBPR_EN		BIT(10)
+#define VEC_CONFIG2_UV_DIG_DIS		BIT(6)
+#define VEC_CONFIG2_RGB_DIG_DIS		BIT(5)
+#define VEC_CONFIG2_TMUX_MASK		GENMASK(3, 2)
+#define VEC_CONFIG2_TMUX_DRIVE0		(0 << 2)
+#define VEC_CONFIG2_TMUX_RG_COMP	(1 << 2)
+#define VEC_CONFIG2_TMUX_UV_YC		(2 << 2)
+#define VEC_CONFIG2_TMUX_SYNC_YC	(3 << 2)
+
+#define VEC_INTERRUPT_CONTROL		0x190
+#define VEC_INTERRUPT_STATUS		0x194
+#define VEC_FCW_SECAM_B			0x198
+#define VEC_SECAM_GAIN_VAL		0x19c
+
+#define VEC_CONFIG3			0x1a0
+#define VEC_CONFIG3_HORIZ_LEN_STD	(0 << 0)
+#define VEC_CONFIG3_HORIZ_LEN_MPEG1_SIF	(1 << 0)
+#define VEC_CONFIG3_SHAPE_NON_LINEAR	BIT(1)
+
+#define VEC_STATUS0			0x200
+#define VEC_MASK0			0x204
+
+#define VEC_CFG				0x208
+#define VEC_CFG_SG_MODE_MASK		GENMASK(6, 5)
+#define VEC_CFG_SG_MODE(x)		((x) << 5)
+#define VEC_CFG_SG_EN			BIT(4)
+#define VEC_CFG_VEC_EN			BIT(3)
+#define VEC_CFG_MB_EN			BIT(2)
+#define VEC_CFG_ENABLE			BIT(1)
+#define VEC_CFG_TB_EN			BIT(0)
+
+#define VEC_DAC_TEST			0x20c
+
+#define VEC_DAC_CONFIG			0x210
+#define VEC_DAC_CONFIG_LDO_BIAS_CTRL(x)	((x) << 24)
+#define VEC_DAC_CONFIG_DRIVER_CTRL(x)	((x) << 16)
+#define VEC_DAC_CONFIG_DAC_CTRL(x)	(x)
+
+#define VEC_DAC_MISC			0x214
+#define VEC_DAC_MISC_VCD_CTRL_MASK	GENMASK(31, 16)
+#define VEC_DAC_MISC_VCD_CTRL(x)	((x) << 16)
+#define VEC_DAC_MISC_VID_ACT		BIT(8)
+#define VEC_DAC_MISC_VCD_PWRDN		BIT(6)
+#define VEC_DAC_MISC_BIAS_PWRDN		BIT(5)
+#define VEC_DAC_MISC_DAC_PWRDN		BIT(2)
+#define VEC_DAC_MISC_LDO_PWRDN		BIT(1)
+#define VEC_DAC_MISC_DAC_RST_N		BIT(0)
+
+
+struct vc4_vec_variant {
+	u32 dac_config;
+};
+
+/* General VEC hardware state. */
+struct vc4_vec {
+	struct vc4_encoder encoder;
+	struct drm_connector connector;
+
+	struct platform_device *pdev;
+	const struct vc4_vec_variant *variant;
+
+	void __iomem *regs;
+
+	struct clk *clock;
+
+	struct debugfs_regset32 regset;
+};
+
+#define VEC_READ(offset) readl(vec->regs + (offset))
+#define VEC_WRITE(offset, val) writel(val, vec->regs + (offset))
+
+static inline struct vc4_vec *
+encoder_to_vc4_vec(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct vc4_vec, encoder.base);
+}
+
+enum vc4_vec_tv_mode_id {
+	VC4_VEC_TV_MODE_NTSC,
+	VC4_VEC_TV_MODE_NTSC_J,
+	VC4_VEC_TV_MODE_PAL,
+	VC4_VEC_TV_MODE_PAL_M,
+};
+
+struct vc4_vec_tv_mode {
+	const struct drm_display_mode *mode;
+	u32 config0;
+	u32 config1;
+	u32 custom_freq;
+};
+
+static const struct debugfs_reg32 vec_regs[] = {
+	VC4_REG32(VEC_WSE_CONTROL),
+	VC4_REG32(VEC_WSE_WSS_DATA),
+	VC4_REG32(VEC_WSE_VPS_DATA1),
+	VC4_REG32(VEC_WSE_VPS_CONTROL),
+	VC4_REG32(VEC_REVID),
+	VC4_REG32(VEC_CONFIG0),
+	VC4_REG32(VEC_SCHPH),
+	VC4_REG32(VEC_CLMP0_START),
+	VC4_REG32(VEC_CLMP0_END),
+	VC4_REG32(VEC_FREQ3_2),
+	VC4_REG32(VEC_FREQ1_0),
+	VC4_REG32(VEC_CONFIG1),
+	VC4_REG32(VEC_CONFIG2),
+	VC4_REG32(VEC_INTERRUPT_CONTROL),
+	VC4_REG32(VEC_INTERRUPT_STATUS),
+	VC4_REG32(VEC_FCW_SECAM_B),
+	VC4_REG32(VEC_SECAM_GAIN_VAL),
+	VC4_REG32(VEC_CONFIG3),
+	VC4_REG32(VEC_STATUS0),
+	VC4_REG32(VEC_MASK0),
+	VC4_REG32(VEC_CFG),
+	VC4_REG32(VEC_DAC_TEST),
+	VC4_REG32(VEC_DAC_CONFIG),
+	VC4_REG32(VEC_DAC_MISC),
+};
+
+static const struct drm_display_mode ntsc_mode = {
+	DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
+		 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
+		 480, 480 + 7, 480 + 7 + 6, 525, 0,
+		 DRM_MODE_FLAG_INTERLACE)
+};
+
+static const struct drm_display_mode pal_mode = {
+	DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
+		 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
+		 576, 576 + 4, 576 + 4 + 6, 625, 0,
+		 DRM_MODE_FLAG_INTERLACE)
+};
+
+static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
+	[VC4_VEC_TV_MODE_NTSC] = {
+		.mode = &ntsc_mode,
+		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	[VC4_VEC_TV_MODE_NTSC_J] = {
+		.mode = &ntsc_mode,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	[VC4_VEC_TV_MODE_PAL] = {
+		.mode = &pal_mode,
+		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	[VC4_VEC_TV_MODE_PAL_M] = {
+		.mode = &ntsc_mode,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+};
+
+static enum drm_connector_status
+vc4_vec_connector_detect(struct drm_connector *connector, bool force)
+{
+	return connector_status_unknown;
+}
+
+static int vc4_vec_connector_get_modes(struct drm_connector *connector)
+{
+	struct drm_connector_state *state = connector->state;
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev,
+				  vc4_vec_tv_modes[state->tv.mode].mode);
+	if (!mode) {
+		DRM_ERROR("Failed to create a new display mode\n");
+		return -ENOMEM;
+	}
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_connector_funcs vc4_vec_connector_funcs = {
+	.detect = vc4_vec_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = {
+	.get_modes = vc4_vec_connector_get_modes,
+};
+
+static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
+{
+	struct drm_connector *connector = &vec->connector;
+	int ret;
+
+	connector->interlace_allowed = true;
+
+	ret = drmm_connector_init(dev, connector, &vc4_vec_connector_funcs,
+				 DRM_MODE_CONNECTOR_Composite, NULL);
+	if (ret)
+		return ret;
+
+	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
+
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.tv_mode_property,
+				   VC4_VEC_TV_MODE_NTSC);
+
+	drm_connector_attach_encoder(connector, &vec->encoder.base);
+
+	return 0;
+}
+
+static void vc4_vec_encoder_disable(struct drm_encoder *encoder,
+				    struct drm_atomic_state *state)
+{
+	struct drm_device *drm = encoder->dev;
+	struct vc4_vec *vec = encoder_to_vc4_vec(encoder);
+	int idx, ret;
+
+	if (!drm_dev_enter(drm, &idx))
+		return;
+
+	VEC_WRITE(VEC_CFG, 0);
+	VEC_WRITE(VEC_DAC_MISC,
+		  VEC_DAC_MISC_VCD_PWRDN |
+		  VEC_DAC_MISC_BIAS_PWRDN |
+		  VEC_DAC_MISC_DAC_PWRDN |
+		  VEC_DAC_MISC_LDO_PWRDN);
+
+	clk_disable_unprepare(vec->clock);
+
+	ret = pm_runtime_put(&vec->pdev->dev);
+	if (ret < 0) {
+		DRM_ERROR("Failed to release power domain: %d\n", ret);
+		goto err_dev_exit;
+	}
+
+	drm_dev_exit(idx);
+	return;
+
+err_dev_exit:
+	drm_dev_exit(idx);
+}
+
+static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
+				   struct drm_atomic_state *state)
+{
+	struct drm_device *drm = encoder->dev;
+	struct vc4_vec *vec = encoder_to_vc4_vec(encoder);
+	struct drm_connector *connector = &vec->connector;
+	struct drm_connector_state *conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	const struct vc4_vec_tv_mode *tv_mode =
+		&vc4_vec_tv_modes[conn_state->tv.mode];
+	int idx, ret;
+
+	if (!drm_dev_enter(drm, &idx))
+		return;
+
+	ret = pm_runtime_get_sync(&vec->pdev->dev);
+	if (ret < 0) {
+		DRM_ERROR("Failed to retain power domain: %d\n", ret);
+		goto err_dev_exit;
+	}
+
+	/*
+	 * We need to set the clock rate each time we enable the encoder
+	 * because there's a chance we share the same parent with the HDMI
+	 * clock, and both drivers are requesting different rates.
+	 * The good news is, these 2 encoders cannot be enabled at the same
+	 * time, thus preventing incompatible rate requests.
+	 */
+	ret = clk_set_rate(vec->clock, 108000000);
+	if (ret) {
+		DRM_ERROR("Failed to set clock rate: %d\n", ret);
+		goto err_put_runtime_pm;
+	}
+
+	ret = clk_prepare_enable(vec->clock);
+	if (ret) {
+		DRM_ERROR("Failed to turn on core clock: %d\n", ret);
+		goto err_put_runtime_pm;
+	}
+
+	/* Reset the different blocks */
+	VEC_WRITE(VEC_WSE_RESET, 1);
+	VEC_WRITE(VEC_SOFT_RESET, 1);
+
+	/* Disable the CGSM-A and WSE blocks */
+	VEC_WRITE(VEC_WSE_CONTROL, 0);
+
+	/* Write config common to all modes. */
+
+	/*
+	 * Color subcarrier phase: phase = 360 * SCHPH / 256.
+	 * 0x28 <=> 39.375 deg.
+	 */
+	VEC_WRITE(VEC_SCHPH, 0x28);
+
+	/*
+	 * Reset to default values.
+	 */
+	VEC_WRITE(VEC_CLMP0_START, 0xac);
+	VEC_WRITE(VEC_CLMP0_END, 0xec);
+	VEC_WRITE(VEC_CONFIG2,
+		  VEC_CONFIG2_UV_DIG_DIS | VEC_CONFIG2_RGB_DIG_DIS);
+	VEC_WRITE(VEC_CONFIG3, VEC_CONFIG3_HORIZ_LEN_STD);
+	VEC_WRITE(VEC_DAC_CONFIG, vec->variant->dac_config);
+
+	/* Mask all interrupts. */
+	VEC_WRITE(VEC_MASK0, 0);
+
+	VEC_WRITE(VEC_CONFIG0, tv_mode->config0);
+	VEC_WRITE(VEC_CONFIG1, tv_mode->config1);
+
+	if (tv_mode->custom_freq) {
+		VEC_WRITE(VEC_FREQ3_2,
+			  (tv_mode->custom_freq >> 16) & 0xffff);
+		VEC_WRITE(VEC_FREQ1_0,
+			  tv_mode->custom_freq & 0xffff);
+	}
+
+	VEC_WRITE(VEC_DAC_MISC,
+		  VEC_DAC_MISC_VID_ACT | VEC_DAC_MISC_DAC_RST_N);
+	VEC_WRITE(VEC_CFG, VEC_CFG_VEC_EN);
+
+	drm_dev_exit(idx);
+	return;
+
+err_put_runtime_pm:
+	pm_runtime_put(&vec->pdev->dev);
+err_dev_exit:
+	drm_dev_exit(idx);
+}
+
+static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
+					struct drm_crtc_state *crtc_state,
+					struct drm_connector_state *conn_state)
+{
+	const struct vc4_vec_tv_mode *vec_mode;
+
+	vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode];
+
+	if (conn_state->crtc &&
+	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct drm_encoder_helper_funcs vc4_vec_encoder_helper_funcs = {
+	.atomic_check = vc4_vec_encoder_atomic_check,
+	.atomic_disable = vc4_vec_encoder_disable,
+	.atomic_enable = vc4_vec_encoder_enable,
+};
+
+static int vc4_vec_late_register(struct drm_encoder *encoder)
+{
+	struct drm_device *drm = encoder->dev;
+	struct vc4_vec *vec = encoder_to_vc4_vec(encoder);
+	int ret;
+
+	ret = vc4_debugfs_add_regset32(drm->primary, "vec_regs",
+				       &vec->regset);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct drm_encoder_funcs vc4_vec_encoder_funcs = {
+	.late_register = vc4_vec_late_register,
+};
+
+static const struct vc4_vec_variant bcm2835_vec_variant = {
+	.dac_config = VEC_DAC_CONFIG_DAC_CTRL(0xc) |
+		      VEC_DAC_CONFIG_DRIVER_CTRL(0xc) |
+		      VEC_DAC_CONFIG_LDO_BIAS_CTRL(0x46)
+};
+
+static const struct vc4_vec_variant bcm2711_vec_variant = {
+	.dac_config = VEC_DAC_CONFIG_DAC_CTRL(0x0) |
+		      VEC_DAC_CONFIG_DRIVER_CTRL(0x80) |
+		      VEC_DAC_CONFIG_LDO_BIAS_CTRL(0x61)
+};
+
+static const struct of_device_id vc4_vec_dt_match[] = {
+	{ .compatible = "brcm,bcm2835-vec", .data = &bcm2835_vec_variant },
+	{ .compatible = "brcm,bcm2711-vec", .data = &bcm2711_vec_variant },
+	{ /* sentinel */ },
+};
+
+static const char * const tv_mode_names[] = {
+	[VC4_VEC_TV_MODE_NTSC] = "NTSC",
+	[VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J",
+	[VC4_VEC_TV_MODE_PAL] = "PAL",
+	[VC4_VEC_TV_MODE_PAL_M] = "PAL-M",
+};
+
+static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = dev_get_drvdata(master);
+	struct vc4_vec *vec;
+	int ret;
+
+	ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names),
+					    tv_mode_names);
+	if (ret)
+		return ret;
+
+	vec = drmm_kzalloc(drm, sizeof(*vec), GFP_KERNEL);
+	if (!vec)
+		return -ENOMEM;
+
+	vec->encoder.type = VC4_ENCODER_TYPE_VEC;
+	vec->pdev = pdev;
+	vec->variant = (const struct vc4_vec_variant *)
+		of_device_get_match_data(dev);
+	vec->regs = vc4_ioremap_regs(pdev, 0);
+	if (IS_ERR(vec->regs))
+		return PTR_ERR(vec->regs);
+	vec->regset.base = vec->regs;
+	vec->regset.regs = vec_regs;
+	vec->regset.nregs = ARRAY_SIZE(vec_regs);
+
+	vec->clock = devm_clk_get(dev, NULL);
+	if (IS_ERR(vec->clock)) {
+		ret = PTR_ERR(vec->clock);
+		if (ret != -EPROBE_DEFER)
+			DRM_ERROR("Failed to get clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
+
+	ret = drmm_encoder_init(drm, &vec->encoder.base,
+				&vc4_vec_encoder_funcs,
+				DRM_MODE_ENCODER_TVDAC,
+				NULL);
+	if (ret)
+		return ret;
+
+	drm_encoder_helper_add(&vec->encoder.base, &vc4_vec_encoder_helper_funcs);
+
+	ret = vc4_vec_connector_init(drm, vec);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(dev, vec);
+
+	return 0;
+}
+
+static const struct component_ops vc4_vec_ops = {
+	.bind   = vc4_vec_bind,
+};
+
+static int vc4_vec_dev_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &vc4_vec_ops);
+}
+
+static int vc4_vec_dev_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &vc4_vec_ops);
+	return 0;
+}
+
+struct platform_driver vc4_vec_driver = {
+	.probe = vc4_vec_dev_probe,
+	.remove = vc4_vec_dev_remove,
+	.driver = {
+		.name = "vc4_vec",
+		.of_match_table = vc4_vec_dt_match,
+	},
+};