Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 842 insertions, 0 deletions

diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c
new file mode 100644
index 000000000..778bc26d3
--- /dev/null
+++ b/drivers/gpu/ipu-v3/ipu-csi.c
@@ -0,0 +1,842 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012-2014 Mentor Graphics Inc.
+ * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
+ */
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <uapi/linux/v4l2-mediabus.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#include "ipu-prv.h"
+
+struct ipu_csi {
+	void __iomem *base;
+	int id;
+	u32 module;
+	struct clk *clk_ipu;	/* IPU bus clock */
+	spinlock_t lock;
+	bool inuse;
+	struct ipu_soc *ipu;
+};
+
+/* CSI Register Offsets */
+#define CSI_SENS_CONF		0x0000
+#define CSI_SENS_FRM_SIZE	0x0004
+#define CSI_ACT_FRM_SIZE	0x0008
+#define CSI_OUT_FRM_CTRL	0x000c
+#define CSI_TST_CTRL		0x0010
+#define CSI_CCIR_CODE_1		0x0014
+#define CSI_CCIR_CODE_2		0x0018
+#define CSI_CCIR_CODE_3		0x001c
+#define CSI_MIPI_DI		0x0020
+#define CSI_SKIP		0x0024
+#define CSI_CPD_CTRL		0x0028
+#define CSI_CPD_RC(n)		(0x002c + ((n)*4))
+#define CSI_CPD_RS(n)		(0x004c + ((n)*4))
+#define CSI_CPD_GRC(n)		(0x005c + ((n)*4))
+#define CSI_CPD_GRS(n)		(0x007c + ((n)*4))
+#define CSI_CPD_GBC(n)		(0x008c + ((n)*4))
+#define CSI_CPD_GBS(n)		(0x00Ac + ((n)*4))
+#define CSI_CPD_BC(n)		(0x00Bc + ((n)*4))
+#define CSI_CPD_BS(n)		(0x00Dc + ((n)*4))
+#define CSI_CPD_OFFSET1		0x00ec
+#define CSI_CPD_OFFSET2		0x00f0
+
+/* CSI Register Fields */
+#define CSI_SENS_CONF_DATA_FMT_SHIFT		8
+#define CSI_SENS_CONF_DATA_FMT_MASK		0x00000700
+#define CSI_SENS_CONF_DATA_FMT_RGB_YUV444	0L
+#define CSI_SENS_CONF_DATA_FMT_YUV422_YUYV	1L
+#define CSI_SENS_CONF_DATA_FMT_YUV422_UYVY	2L
+#define CSI_SENS_CONF_DATA_FMT_BAYER		3L
+#define CSI_SENS_CONF_DATA_FMT_RGB565		4L
+#define CSI_SENS_CONF_DATA_FMT_RGB555		5L
+#define CSI_SENS_CONF_DATA_FMT_RGB444		6L
+#define CSI_SENS_CONF_DATA_FMT_JPEG		7L
+
+#define CSI_SENS_CONF_VSYNC_POL_SHIFT		0
+#define CSI_SENS_CONF_HSYNC_POL_SHIFT		1
+#define CSI_SENS_CONF_DATA_POL_SHIFT		2
+#define CSI_SENS_CONF_PIX_CLK_POL_SHIFT		3
+#define CSI_SENS_CONF_SENS_PRTCL_MASK		0x00000070
+#define CSI_SENS_CONF_SENS_PRTCL_SHIFT		4
+#define CSI_SENS_CONF_PACK_TIGHT_SHIFT		7
+#define CSI_SENS_CONF_DATA_WIDTH_SHIFT		11
+#define CSI_SENS_CONF_EXT_VSYNC_SHIFT		15
+#define CSI_SENS_CONF_DIVRATIO_SHIFT		16
+
+#define CSI_SENS_CONF_DIVRATIO_MASK		0x00ff0000
+#define CSI_SENS_CONF_DATA_DEST_SHIFT		24
+#define CSI_SENS_CONF_DATA_DEST_MASK		0x07000000
+#define CSI_SENS_CONF_JPEG8_EN_SHIFT		27
+#define CSI_SENS_CONF_JPEG_EN_SHIFT		28
+#define CSI_SENS_CONF_FORCE_EOF_SHIFT		29
+#define CSI_SENS_CONF_DATA_EN_POL_SHIFT		31
+
+#define CSI_DATA_DEST_IC			2
+#define CSI_DATA_DEST_IDMAC			4
+
+#define CSI_CCIR_ERR_DET_EN			0x01000000
+#define CSI_HORI_DOWNSIZE_EN			0x80000000
+#define CSI_VERT_DOWNSIZE_EN			0x40000000
+#define CSI_TEST_GEN_MODE_EN			0x01000000
+
+#define CSI_HSC_MASK				0x1fff0000
+#define CSI_HSC_SHIFT				16
+#define CSI_VSC_MASK				0x00000fff
+#define CSI_VSC_SHIFT				0
+
+#define CSI_TEST_GEN_R_MASK			0x000000ff
+#define CSI_TEST_GEN_R_SHIFT			0
+#define CSI_TEST_GEN_G_MASK			0x0000ff00
+#define CSI_TEST_GEN_G_SHIFT			8
+#define CSI_TEST_GEN_B_MASK			0x00ff0000
+#define CSI_TEST_GEN_B_SHIFT			16
+
+#define CSI_MAX_RATIO_SKIP_SMFC_MASK		0x00000007
+#define CSI_MAX_RATIO_SKIP_SMFC_SHIFT		0
+#define CSI_SKIP_SMFC_MASK			0x000000f8
+#define CSI_SKIP_SMFC_SHIFT			3
+#define CSI_ID_2_SKIP_MASK			0x00000300
+#define CSI_ID_2_SKIP_SHIFT			8
+
+#define CSI_COLOR_FIRST_ROW_MASK		0x00000002
+#define CSI_COLOR_FIRST_COMP_MASK		0x00000001
+
+/* MIPI CSI-2 data types */
+#define MIPI_DT_YUV420		0x18 /* YYY.../UYVY.... */
+#define MIPI_DT_YUV420_LEGACY	0x1a /* UYY.../VYY...   */
+#define MIPI_DT_YUV422		0x1e /* UYVY...         */
+#define MIPI_DT_RGB444		0x20
+#define MIPI_DT_RGB555		0x21
+#define MIPI_DT_RGB565		0x22
+#define MIPI_DT_RGB666		0x23
+#define MIPI_DT_RGB888		0x24
+#define MIPI_DT_RAW6		0x28
+#define MIPI_DT_RAW7		0x29
+#define MIPI_DT_RAW8		0x2a
+#define MIPI_DT_RAW10		0x2b
+#define MIPI_DT_RAW12		0x2c
+#define MIPI_DT_RAW14		0x2d
+
+/*
+ * Bitfield of CSI bus signal polarities and modes.
+ */
+struct ipu_csi_bus_config {
+	unsigned data_width:4;
+	unsigned clk_mode:3;
+	unsigned ext_vsync:1;
+	unsigned vsync_pol:1;
+	unsigned hsync_pol:1;
+	unsigned pixclk_pol:1;
+	unsigned data_pol:1;
+	unsigned sens_clksrc:1;
+	unsigned pack_tight:1;
+	unsigned force_eof:1;
+	unsigned data_en_pol:1;
+
+	unsigned data_fmt;
+	unsigned mipi_dt;
+};
+
+/*
+ * Enumeration of CSI data bus widths.
+ */
+enum ipu_csi_data_width {
+	IPU_CSI_DATA_WIDTH_4   = 0,
+	IPU_CSI_DATA_WIDTH_8   = 1,
+	IPU_CSI_DATA_WIDTH_10  = 3,
+	IPU_CSI_DATA_WIDTH_12  = 5,
+	IPU_CSI_DATA_WIDTH_16  = 9,
+};
+
+/*
+ * Enumeration of CSI clock modes.
+ */
+enum ipu_csi_clk_mode {
+	IPU_CSI_CLK_MODE_GATED_CLK,
+	IPU_CSI_CLK_MODE_NONGATED_CLK,
+	IPU_CSI_CLK_MODE_CCIR656_PROGRESSIVE,
+	IPU_CSI_CLK_MODE_CCIR656_INTERLACED,
+	IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_DDR,
+	IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR,
+	IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_DDR,
+	IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_SDR,
+};
+
+static inline u32 ipu_csi_read(struct ipu_csi *csi, unsigned offset)
+{
+	return readl(csi->base + offset);
+}
+
+static inline void ipu_csi_write(struct ipu_csi *csi, u32 value,
+				 unsigned offset)
+{
+	writel(value, csi->base + offset);
+}
+
+/*
+ * Set mclk division ratio for generating test mode mclk. Only used
+ * for test generator.
+ */
+static int ipu_csi_set_testgen_mclk(struct ipu_csi *csi, u32 pixel_clk,
+					u32 ipu_clk)
+{
+	u32 temp;
+	int div_ratio;
+
+	div_ratio = (ipu_clk / pixel_clk) - 1;
+
+	if (div_ratio > 0xFF || div_ratio < 0) {
+		dev_err(csi->ipu->dev,
+			"value of pixel_clk extends normal range\n");
+		return -EINVAL;
+	}
+
+	temp = ipu_csi_read(csi, CSI_SENS_CONF);
+	temp &= ~CSI_SENS_CONF_DIVRATIO_MASK;
+	ipu_csi_write(csi, temp | (div_ratio << CSI_SENS_CONF_DIVRATIO_SHIFT),
+			  CSI_SENS_CONF);
+
+	return 0;
+}
+
+/*
+ * Find the CSI data format and data width for the given V4L2 media
+ * bus pixel format code.
+ */
+static int mbus_code_to_bus_cfg(struct ipu_csi_bus_config *cfg, u32 mbus_code,
+				enum v4l2_mbus_type mbus_type)
+{
+	switch (mbus_code) {
+	case MEDIA_BUS_FMT_BGR565_2X8_BE:
+	case MEDIA_BUS_FMT_BGR565_2X8_LE:
+	case MEDIA_BUS_FMT_RGB565_2X8_BE:
+	case MEDIA_BUS_FMT_RGB565_2X8_LE:
+		if (mbus_type == V4L2_MBUS_CSI2_DPHY)
+			cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_RGB565;
+		else
+			cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER;
+		cfg->mipi_dt = MIPI_DT_RGB565;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		break;
+	case MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE:
+	case MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE:
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_RGB444;
+		cfg->mipi_dt = MIPI_DT_RGB444;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		break;
+	case MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE:
+	case MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE:
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_RGB555;
+		cfg->mipi_dt = MIPI_DT_RGB555;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		break;
+	case MEDIA_BUS_FMT_RGB888_1X24:
+	case MEDIA_BUS_FMT_BGR888_1X24:
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_RGB_YUV444;
+		cfg->mipi_dt = MIPI_DT_RGB888;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		break;
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_YUV422_UYVY;
+		cfg->mipi_dt = MIPI_DT_YUV422;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		break;
+	case MEDIA_BUS_FMT_YUYV8_2X8:
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_YUV422_YUYV;
+		cfg->mipi_dt = MIPI_DT_YUV422;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		break;
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+		if (mbus_type == V4L2_MBUS_BT656) {
+			cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_YUV422_UYVY;
+			cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		} else {
+			cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER;
+			cfg->data_width = IPU_CSI_DATA_WIDTH_16;
+		}
+		cfg->mipi_dt = MIPI_DT_YUV422;
+		break;
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+		if (mbus_type == V4L2_MBUS_BT656) {
+			cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_YUV422_YUYV;
+			cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		} else {
+			cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER;
+			cfg->data_width = IPU_CSI_DATA_WIDTH_16;
+		}
+		cfg->mipi_dt = MIPI_DT_YUV422;
+		break;
+	case MEDIA_BUS_FMT_SBGGR8_1X8:
+	case MEDIA_BUS_FMT_SGBRG8_1X8:
+	case MEDIA_BUS_FMT_SGRBG8_1X8:
+	case MEDIA_BUS_FMT_SRGGB8_1X8:
+	case MEDIA_BUS_FMT_Y8_1X8:
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER;
+		cfg->mipi_dt = MIPI_DT_RAW8;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		break;
+	case MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8:
+	case MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8:
+	case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
+	case MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8:
+	case MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_BE:
+	case MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE:
+	case MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_BE:
+	case MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_LE:
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER;
+		cfg->mipi_dt = MIPI_DT_RAW10;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		break;
+	case MEDIA_BUS_FMT_SBGGR10_1X10:
+	case MEDIA_BUS_FMT_SGBRG10_1X10:
+	case MEDIA_BUS_FMT_SGRBG10_1X10:
+	case MEDIA_BUS_FMT_SRGGB10_1X10:
+	case MEDIA_BUS_FMT_Y10_1X10:
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER;
+		cfg->mipi_dt = MIPI_DT_RAW10;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_10;
+		break;
+	case MEDIA_BUS_FMT_SBGGR12_1X12:
+	case MEDIA_BUS_FMT_SGBRG12_1X12:
+	case MEDIA_BUS_FMT_SGRBG12_1X12:
+	case MEDIA_BUS_FMT_SRGGB12_1X12:
+	case MEDIA_BUS_FMT_Y12_1X12:
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER;
+		cfg->mipi_dt = MIPI_DT_RAW12;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_12;
+		break;
+	case MEDIA_BUS_FMT_JPEG_1X8:
+		/* TODO */
+		cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_JPEG;
+		cfg->mipi_dt = MIPI_DT_RAW8;
+		cfg->data_width = IPU_CSI_DATA_WIDTH_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* translate alternate field mode based on given standard */
+static inline enum v4l2_field
+ipu_csi_translate_field(enum v4l2_field field, v4l2_std_id std)
+{
+	return (field != V4L2_FIELD_ALTERNATE) ? field :
+		((std & V4L2_STD_525_60) ?
+		 V4L2_FIELD_SEQ_BT : V4L2_FIELD_SEQ_TB);
+}
+
+/*
+ * Fill a CSI bus config struct from mbus_config and mbus_framefmt.
+ */
+static int fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg,
+			    const struct v4l2_mbus_config *mbus_cfg,
+			    const struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	int ret, is_bt1120;
+
+	memset(csicfg, 0, sizeof(*csicfg));
+
+	ret = mbus_code_to_bus_cfg(csicfg, mbus_fmt->code, mbus_cfg->type);
+	if (ret < 0)
+		return ret;
+
+	switch (mbus_cfg->type) {
+	case V4L2_MBUS_PARALLEL:
+		csicfg->ext_vsync = 1;
+		csicfg->vsync_pol = (mbus_cfg->bus.parallel.flags &
+				     V4L2_MBUS_VSYNC_ACTIVE_LOW) ? 1 : 0;
+		csicfg->hsync_pol = (mbus_cfg->bus.parallel.flags &
+				     V4L2_MBUS_HSYNC_ACTIVE_LOW) ? 1 : 0;
+		csicfg->pixclk_pol = (mbus_cfg->bus.parallel.flags &
+				      V4L2_MBUS_PCLK_SAMPLE_FALLING) ? 1 : 0;
+		csicfg->clk_mode = IPU_CSI_CLK_MODE_GATED_CLK;
+		break;
+	case V4L2_MBUS_BT656:
+		csicfg->ext_vsync = 0;
+		/* UYVY10_1X20 etc. should be supported as well */
+		is_bt1120 = mbus_fmt->code == MEDIA_BUS_FMT_UYVY8_1X16 ||
+			    mbus_fmt->code == MEDIA_BUS_FMT_YUYV8_1X16;
+		if (V4L2_FIELD_HAS_BOTH(mbus_fmt->field) ||
+		    mbus_fmt->field == V4L2_FIELD_ALTERNATE)
+			csicfg->clk_mode = is_bt1120 ?
+				IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_SDR :
+				IPU_CSI_CLK_MODE_CCIR656_INTERLACED;
+		else
+			csicfg->clk_mode = is_bt1120 ?
+				IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR :
+				IPU_CSI_CLK_MODE_CCIR656_PROGRESSIVE;
+		break;
+	case V4L2_MBUS_CSI2_DPHY:
+		/*
+		 * MIPI CSI-2 requires non gated clock mode, all other
+		 * parameters are not applicable for MIPI CSI-2 bus.
+		 */
+		csicfg->clk_mode = IPU_CSI_CLK_MODE_NONGATED_CLK;
+		break;
+	default:
+		/* will never get here, keep compiler quiet */
+		break;
+	}
+
+	return 0;
+}
+
+static int
+ipu_csi_set_bt_interlaced_codes(struct ipu_csi *csi,
+				const struct v4l2_mbus_framefmt *infmt,
+				const struct v4l2_mbus_framefmt *outfmt,
+				v4l2_std_id std)
+{
+	enum v4l2_field infield, outfield;
+	bool swap_fields;
+
+	/* get translated field type of input and output */
+	infield = ipu_csi_translate_field(infmt->field, std);
+	outfield = ipu_csi_translate_field(outfmt->field, std);
+
+	/*
+	 * Write the H-V-F codes the CSI will match against the
+	 * incoming data for start/end of active and blanking
+	 * field intervals. If input and output field types are
+	 * sequential but not the same (one is SEQ_BT and the other
+	 * is SEQ_TB), swap the F-bit so that the CSI will capture
+	 * field 1 lines before field 0 lines.
+	 */
+	swap_fields = (V4L2_FIELD_IS_SEQUENTIAL(infield) &&
+		       V4L2_FIELD_IS_SEQUENTIAL(outfield) &&
+		       infield != outfield);
+
+	if (!swap_fields) {
+		/*
+		 * Field0BlankEnd  = 110, Field0BlankStart  = 010
+		 * Field0ActiveEnd = 100, Field0ActiveStart = 000
+		 * Field1BlankEnd  = 111, Field1BlankStart  = 011
+		 * Field1ActiveEnd = 101, Field1ActiveStart = 001
+		 */
+		ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN,
+			      CSI_CCIR_CODE_1);
+		ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2);
+	} else {
+		dev_dbg(csi->ipu->dev, "capture field swap\n");
+
+		/* same as above but with F-bit inverted */
+		ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN,
+			      CSI_CCIR_CODE_1);
+		ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2);
+	}
+
+	ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
+
+	return 0;
+}
+
+
+int ipu_csi_init_interface(struct ipu_csi *csi,
+			   const struct v4l2_mbus_config *mbus_cfg,
+			   const struct v4l2_mbus_framefmt *infmt,
+			   const struct v4l2_mbus_framefmt *outfmt)
+{
+	struct ipu_csi_bus_config cfg;
+	unsigned long flags;
+	u32 width, height, data = 0;
+	v4l2_std_id std;
+	int ret;
+
+	ret = fill_csi_bus_cfg(&cfg, mbus_cfg, infmt);
+	if (ret < 0)
+		return ret;
+
+	/* set default sensor frame width and height */
+	width = infmt->width;
+	height = infmt->height;
+	if (infmt->field == V4L2_FIELD_ALTERNATE)
+		height *= 2;
+
+	/* Set the CSI_SENS_CONF register remaining fields */
+	data |= cfg.data_width << CSI_SENS_CONF_DATA_WIDTH_SHIFT |
+		cfg.data_fmt << CSI_SENS_CONF_DATA_FMT_SHIFT |
+		cfg.data_pol << CSI_SENS_CONF_DATA_POL_SHIFT |
+		cfg.vsync_pol << CSI_SENS_CONF_VSYNC_POL_SHIFT |
+		cfg.hsync_pol << CSI_SENS_CONF_HSYNC_POL_SHIFT |
+		cfg.pixclk_pol << CSI_SENS_CONF_PIX_CLK_POL_SHIFT |
+		cfg.ext_vsync << CSI_SENS_CONF_EXT_VSYNC_SHIFT |
+		cfg.clk_mode << CSI_SENS_CONF_SENS_PRTCL_SHIFT |
+		cfg.pack_tight << CSI_SENS_CONF_PACK_TIGHT_SHIFT |
+		cfg.force_eof << CSI_SENS_CONF_FORCE_EOF_SHIFT |
+		cfg.data_en_pol << CSI_SENS_CONF_DATA_EN_POL_SHIFT;
+
+	spin_lock_irqsave(&csi->lock, flags);
+
+	ipu_csi_write(csi, data, CSI_SENS_CONF);
+
+	/* Set CCIR registers */
+
+	switch (cfg.clk_mode) {
+	case IPU_CSI_CLK_MODE_CCIR656_PROGRESSIVE:
+		ipu_csi_write(csi, 0x40030, CSI_CCIR_CODE_1);
+		ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
+		break;
+	case IPU_CSI_CLK_MODE_CCIR656_INTERLACED:
+		if (width == 720 && height == 480) {
+			std = V4L2_STD_NTSC;
+			height = 525;
+		} else if (width == 720 && height == 576) {
+			std = V4L2_STD_PAL;
+			height = 625;
+		} else {
+			dev_err(csi->ipu->dev,
+				"Unsupported interlaced video mode\n");
+			ret = -EINVAL;
+			goto out_unlock;
+		}
+
+		ret = ipu_csi_set_bt_interlaced_codes(csi, infmt, outfmt, std);
+		if (ret)
+			goto out_unlock;
+		break;
+	case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_DDR:
+	case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR:
+	case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_DDR:
+	case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_SDR:
+		ipu_csi_write(csi, 0x40030 | CSI_CCIR_ERR_DET_EN,
+				   CSI_CCIR_CODE_1);
+		ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
+		break;
+	case IPU_CSI_CLK_MODE_GATED_CLK:
+	case IPU_CSI_CLK_MODE_NONGATED_CLK:
+		ipu_csi_write(csi, 0, CSI_CCIR_CODE_1);
+		break;
+	}
+
+	/* Setup sensor frame size */
+	ipu_csi_write(csi, (width - 1) | ((height - 1) << 16),
+		      CSI_SENS_FRM_SIZE);
+
+	dev_dbg(csi->ipu->dev, "CSI_SENS_CONF = 0x%08X\n",
+		ipu_csi_read(csi, CSI_SENS_CONF));
+	dev_dbg(csi->ipu->dev, "CSI_ACT_FRM_SIZE = 0x%08X\n",
+		ipu_csi_read(csi, CSI_ACT_FRM_SIZE));
+
+out_unlock:
+	spin_unlock_irqrestore(&csi->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ipu_csi_init_interface);
+
+bool ipu_csi_is_interlaced(struct ipu_csi *csi)
+{
+	unsigned long flags;
+	u32 sensor_protocol;
+
+	spin_lock_irqsave(&csi->lock, flags);
+	sensor_protocol =
+		(ipu_csi_read(csi, CSI_SENS_CONF) &
+		 CSI_SENS_CONF_SENS_PRTCL_MASK) >>
+		CSI_SENS_CONF_SENS_PRTCL_SHIFT;
+	spin_unlock_irqrestore(&csi->lock, flags);
+
+	switch (sensor_protocol) {
+	case IPU_CSI_CLK_MODE_GATED_CLK:
+	case IPU_CSI_CLK_MODE_NONGATED_CLK:
+	case IPU_CSI_CLK_MODE_CCIR656_PROGRESSIVE:
+	case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_DDR:
+	case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR:
+		return false;
+	case IPU_CSI_CLK_MODE_CCIR656_INTERLACED:
+	case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_DDR:
+	case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_SDR:
+		return true;
+	default:
+		dev_err(csi->ipu->dev,
+			"CSI %d sensor protocol unsupported\n", csi->id);
+		return false;
+	}
+}
+EXPORT_SYMBOL_GPL(ipu_csi_is_interlaced);
+
+void ipu_csi_get_window(struct ipu_csi *csi, struct v4l2_rect *w)
+{
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&csi->lock, flags);
+
+	reg = ipu_csi_read(csi, CSI_ACT_FRM_SIZE);
+	w->width = (reg & 0xFFFF) + 1;
+	w->height = (reg >> 16 & 0xFFFF) + 1;
+
+	reg = ipu_csi_read(csi, CSI_OUT_FRM_CTRL);
+	w->left = (reg & CSI_HSC_MASK) >> CSI_HSC_SHIFT;
+	w->top = (reg & CSI_VSC_MASK) >> CSI_VSC_SHIFT;
+
+	spin_unlock_irqrestore(&csi->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ipu_csi_get_window);
+
+void ipu_csi_set_window(struct ipu_csi *csi, struct v4l2_rect *w)
+{
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&csi->lock, flags);
+
+	ipu_csi_write(csi, (w->width - 1) | ((w->height - 1) << 16),
+			  CSI_ACT_FRM_SIZE);
+
+	reg = ipu_csi_read(csi, CSI_OUT_FRM_CTRL);
+	reg &= ~(CSI_HSC_MASK | CSI_VSC_MASK);
+	reg |= ((w->top << CSI_VSC_SHIFT) | (w->left << CSI_HSC_SHIFT));
+	ipu_csi_write(csi, reg, CSI_OUT_FRM_CTRL);
+
+	spin_unlock_irqrestore(&csi->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ipu_csi_set_window);
+
+void ipu_csi_set_downsize(struct ipu_csi *csi, bool horiz, bool vert)
+{
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&csi->lock, flags);
+
+	reg = ipu_csi_read(csi, CSI_OUT_FRM_CTRL);
+	reg &= ~(CSI_HORI_DOWNSIZE_EN | CSI_VERT_DOWNSIZE_EN);
+	reg |= (horiz ? CSI_HORI_DOWNSIZE_EN : 0) |
+	       (vert ? CSI_VERT_DOWNSIZE_EN : 0);
+	ipu_csi_write(csi, reg, CSI_OUT_FRM_CTRL);
+
+	spin_unlock_irqrestore(&csi->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ipu_csi_set_downsize);
+
+void ipu_csi_set_test_generator(struct ipu_csi *csi, bool active,
+				u32 r_value, u32 g_value, u32 b_value,
+				u32 pix_clk)
+{
+	unsigned long flags;
+	u32 ipu_clk = clk_get_rate(csi->clk_ipu);
+	u32 temp;
+
+	spin_lock_irqsave(&csi->lock, flags);
+
+	temp = ipu_csi_read(csi, CSI_TST_CTRL);
+
+	if (!active) {
+		temp &= ~CSI_TEST_GEN_MODE_EN;
+		ipu_csi_write(csi, temp, CSI_TST_CTRL);
+	} else {
+		/* Set sensb_mclk div_ratio */
+		ipu_csi_set_testgen_mclk(csi, pix_clk, ipu_clk);
+
+		temp &= ~(CSI_TEST_GEN_R_MASK | CSI_TEST_GEN_G_MASK |
+			  CSI_TEST_GEN_B_MASK);
+		temp |= CSI_TEST_GEN_MODE_EN;
+		temp |= (r_value << CSI_TEST_GEN_R_SHIFT) |
+			(g_value << CSI_TEST_GEN_G_SHIFT) |
+			(b_value << CSI_TEST_GEN_B_SHIFT);
+		ipu_csi_write(csi, temp, CSI_TST_CTRL);
+	}
+
+	spin_unlock_irqrestore(&csi->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ipu_csi_set_test_generator);
+
+int ipu_csi_set_mipi_datatype(struct ipu_csi *csi, u32 vc,
+			      struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	struct ipu_csi_bus_config cfg;
+	unsigned long flags;
+	u32 temp;
+	int ret;
+
+	if (vc > 3)
+		return -EINVAL;
+
+	ret = mbus_code_to_bus_cfg(&cfg, mbus_fmt->code, V4L2_MBUS_CSI2_DPHY);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&csi->lock, flags);
+
+	temp = ipu_csi_read(csi, CSI_MIPI_DI);
+	temp &= ~(0xff << (vc * 8));
+	temp |= (cfg.mipi_dt << (vc * 8));
+	ipu_csi_write(csi, temp, CSI_MIPI_DI);
+
+	spin_unlock_irqrestore(&csi->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_csi_set_mipi_datatype);
+
+int ipu_csi_set_skip_smfc(struct ipu_csi *csi, u32 skip,
+			  u32 max_ratio, u32 id)
+{
+	unsigned long flags;
+	u32 temp;
+
+	if (max_ratio > 5 || id > 3)
+		return -EINVAL;
+
+	spin_lock_irqsave(&csi->lock, flags);
+
+	temp = ipu_csi_read(csi, CSI_SKIP);
+	temp &= ~(CSI_MAX_RATIO_SKIP_SMFC_MASK | CSI_ID_2_SKIP_MASK |
+		  CSI_SKIP_SMFC_MASK);
+	temp |= (max_ratio << CSI_MAX_RATIO_SKIP_SMFC_SHIFT) |
+		(id << CSI_ID_2_SKIP_SHIFT) |
+		(skip << CSI_SKIP_SMFC_SHIFT);
+	ipu_csi_write(csi, temp, CSI_SKIP);
+
+	spin_unlock_irqrestore(&csi->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_csi_set_skip_smfc);
+
+int ipu_csi_set_dest(struct ipu_csi *csi, enum ipu_csi_dest csi_dest)
+{
+	unsigned long flags;
+	u32 csi_sens_conf, dest;
+
+	if (csi_dest == IPU_CSI_DEST_IDMAC)
+		dest = CSI_DATA_DEST_IDMAC;
+	else
+		dest = CSI_DATA_DEST_IC; /* IC or VDIC */
+
+	spin_lock_irqsave(&csi->lock, flags);
+
+	csi_sens_conf = ipu_csi_read(csi, CSI_SENS_CONF);
+	csi_sens_conf &= ~CSI_SENS_CONF_DATA_DEST_MASK;
+	csi_sens_conf |= (dest << CSI_SENS_CONF_DATA_DEST_SHIFT);
+	ipu_csi_write(csi, csi_sens_conf, CSI_SENS_CONF);
+
+	spin_unlock_irqrestore(&csi->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_csi_set_dest);
+
+int ipu_csi_enable(struct ipu_csi *csi)
+{
+	ipu_module_enable(csi->ipu, csi->module);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_csi_enable);
+
+int ipu_csi_disable(struct ipu_csi *csi)
+{
+	ipu_module_disable(csi->ipu, csi->module);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_csi_disable);
+
+struct ipu_csi *ipu_csi_get(struct ipu_soc *ipu, int id)
+{
+	unsigned long flags;
+	struct ipu_csi *csi, *ret;
+
+	if (id > 1)
+		return ERR_PTR(-EINVAL);
+
+	csi = ipu->csi_priv[id];
+	ret = csi;
+
+	spin_lock_irqsave(&csi->lock, flags);
+
+	if (csi->inuse) {
+		ret = ERR_PTR(-EBUSY);
+		goto unlock;
+	}
+
+	csi->inuse = true;
+unlock:
+	spin_unlock_irqrestore(&csi->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ipu_csi_get);
+
+void ipu_csi_put(struct ipu_csi *csi)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&csi->lock, flags);
+	csi->inuse = false;
+	spin_unlock_irqrestore(&csi->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ipu_csi_put);
+
+int ipu_csi_init(struct ipu_soc *ipu, struct device *dev, int id,
+		 unsigned long base, u32 module, struct clk *clk_ipu)
+{
+	struct ipu_csi *csi;
+
+	if (id > 1)
+		return -ENODEV;
+
+	csi = devm_kzalloc(dev, sizeof(*csi), GFP_KERNEL);
+	if (!csi)
+		return -ENOMEM;
+
+	ipu->csi_priv[id] = csi;
+
+	spin_lock_init(&csi->lock);
+	csi->module = module;
+	csi->id = id;
+	csi->clk_ipu = clk_ipu;
+	csi->base = devm_ioremap(dev, base, PAGE_SIZE);
+	if (!csi->base)
+		return -ENOMEM;
+
+	dev_dbg(dev, "CSI%d base: 0x%08lx remapped to %p\n",
+		id, base, csi->base);
+	csi->ipu = ipu;
+
+	return 0;
+}
+
+void ipu_csi_exit(struct ipu_soc *ipu, int id)
+{
+}
+
+void ipu_csi_dump(struct ipu_csi *csi)
+{
+	dev_dbg(csi->ipu->dev, "CSI_SENS_CONF:     %08x\n",
+		ipu_csi_read(csi, CSI_SENS_CONF));
+	dev_dbg(csi->ipu->dev, "CSI_SENS_FRM_SIZE: %08x\n",
+		ipu_csi_read(csi, CSI_SENS_FRM_SIZE));
+	dev_dbg(csi->ipu->dev, "CSI_ACT_FRM_SIZE:  %08x\n",
+		ipu_csi_read(csi, CSI_ACT_FRM_SIZE));
+	dev_dbg(csi->ipu->dev, "CSI_OUT_FRM_CTRL:  %08x\n",
+		ipu_csi_read(csi, CSI_OUT_FRM_CTRL));
+	dev_dbg(csi->ipu->dev, "CSI_TST_CTRL:      %08x\n",
+		ipu_csi_read(csi, CSI_TST_CTRL));
+	dev_dbg(csi->ipu->dev, "CSI_CCIR_CODE_1:   %08x\n",
+		ipu_csi_read(csi, CSI_CCIR_CODE_1));
+	dev_dbg(csi->ipu->dev, "CSI_CCIR_CODE_2:   %08x\n",
+		ipu_csi_read(csi, CSI_CCIR_CODE_2));
+	dev_dbg(csi->ipu->dev, "CSI_CCIR_CODE_3:   %08x\n",
+		ipu_csi_read(csi, CSI_CCIR_CODE_3));
+	dev_dbg(csi->ipu->dev, "CSI_MIPI_DI:       %08x\n",
+		ipu_csi_read(csi, CSI_MIPI_DI));
+	dev_dbg(csi->ipu->dev, "CSI_SKIP:          %08x\n",
+		ipu_csi_read(csi, CSI_SKIP));
+}
+EXPORT_SYMBOL_GPL(ipu_csi_dump);