Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 781 insertions, 0 deletions

diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c
new file mode 100644
index 000000000..da903138e
--- /dev/null
+++ b/drivers/hid/hid-kye.c
@@ -0,0 +1,781 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  HID driver for Kye/Genius devices not fully compliant with HID standard
+ *
+ *  Copyright (c) 2009 Jiri Kosina
+ *  Copyright (c) 2009 Tomas Hanak
+ *  Copyright (c) 2012 Nikolai Kondrashov
+ */
+
+/*
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+/* Original EasyPen i405X report descriptor size */
+#define EASYPEN_I405X_RDESC_ORIG_SIZE	476
+
+/* Fixed EasyPen i405X report descriptor */
+static __u8 easypen_i405x_rdesc_fixed[] = {
+	0x06, 0x00, 0xFF, /*  Usage Page (FF00h),             */
+	0x09, 0x01,       /*  Usage (01h),                    */
+	0xA1, 0x01,       /*  Collection (Application),       */
+	0x85, 0x05,       /*    Report ID (5),                */
+	0x09, 0x01,       /*    Usage (01h),                  */
+	0x15, 0x80,       /*    Logical Minimum (-128),       */
+	0x25, 0x7F,       /*    Logical Maximum (127),        */
+	0x75, 0x08,       /*    Report Size (8),              */
+	0x95, 0x07,       /*    Report Count (7),             */
+	0xB1, 0x02,       /*    Feature (Variable),           */
+	0xC0,             /*  End Collection,                 */
+	0x05, 0x0D,       /*  Usage Page (Digitizer),         */
+	0x09, 0x01,       /*  Usage (Digitizer),              */
+	0xA1, 0x01,       /*  Collection (Application),       */
+	0x85, 0x10,       /*    Report ID (16),               */
+	0x09, 0x20,       /*    Usage (Stylus),               */
+	0xA0,             /*    Collection (Physical),        */
+	0x14,             /*      Logical Minimum (0),        */
+	0x25, 0x01,       /*      Logical Maximum (1),        */
+	0x75, 0x01,       /*      Report Size (1),            */
+	0x09, 0x42,       /*      Usage (Tip Switch),         */
+	0x09, 0x44,       /*      Usage (Barrel Switch),      */
+	0x09, 0x46,       /*      Usage (Tablet Pick),        */
+	0x95, 0x03,       /*      Report Count (3),           */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0x95, 0x04,       /*      Report Count (4),           */
+	0x81, 0x03,       /*      Input (Constant, Variable), */
+	0x09, 0x32,       /*      Usage (In Range),           */
+	0x95, 0x01,       /*      Report Count (1),           */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0x75, 0x10,       /*      Report Size (16),           */
+	0x95, 0x01,       /*      Report Count (1),           */
+	0xA4,             /*      Push,                       */
+	0x05, 0x01,       /*      Usage Page (Desktop),       */
+	0x55, 0xFD,       /*      Unit Exponent (-3),         */
+	0x65, 0x13,       /*      Unit (Inch),                */
+	0x34,             /*      Physical Minimum (0),       */
+	0x09, 0x30,       /*      Usage (X),                  */
+	0x46, 0x7C, 0x15, /*      Physical Maximum (5500),    */
+	0x26, 0x00, 0x37, /*      Logical Maximum (14080),    */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0x09, 0x31,       /*      Usage (Y),                  */
+	0x46, 0xA0, 0x0F, /*      Physical Maximum (4000),    */
+	0x26, 0x00, 0x28, /*      Logical Maximum (10240),    */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0xB4,             /*      Pop,                        */
+	0x09, 0x30,       /*      Usage (Tip Pressure),       */
+	0x26, 0xFF, 0x03, /*      Logical Maximum (1023),     */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0xC0,             /*    End Collection,               */
+	0xC0              /*  End Collection                  */
+};
+
+/* Original MousePen i608X report descriptor size */
+#define MOUSEPEN_I608X_RDESC_ORIG_SIZE	476
+
+/* Fixed MousePen i608X report descriptor */
+static __u8 mousepen_i608x_rdesc_fixed[] = {
+	0x06, 0x00, 0xFF, /*  Usage Page (FF00h),             */
+	0x09, 0x01,       /*  Usage (01h),                    */
+	0xA1, 0x01,       /*  Collection (Application),       */
+	0x85, 0x05,       /*    Report ID (5),                */
+	0x09, 0x01,       /*    Usage (01h),                  */
+	0x15, 0x80,       /*    Logical Minimum (-128),       */
+	0x25, 0x7F,       /*    Logical Maximum (127),        */
+	0x75, 0x08,       /*    Report Size (8),              */
+	0x95, 0x07,       /*    Report Count (7),             */
+	0xB1, 0x02,       /*    Feature (Variable),           */
+	0xC0,             /*  End Collection,                 */
+	0x05, 0x0D,       /*  Usage Page (Digitizer),         */
+	0x09, 0x01,       /*  Usage (Digitizer),              */
+	0xA1, 0x01,       /*  Collection (Application),       */
+	0x85, 0x10,       /*    Report ID (16),               */
+	0x09, 0x20,       /*    Usage (Stylus),               */
+	0xA0,             /*    Collection (Physical),        */
+	0x14,             /*      Logical Minimum (0),        */
+	0x25, 0x01,       /*      Logical Maximum (1),        */
+	0x75, 0x01,       /*      Report Size (1),            */
+	0x09, 0x42,       /*      Usage (Tip Switch),         */
+	0x09, 0x44,       /*      Usage (Barrel Switch),      */
+	0x09, 0x46,       /*      Usage (Tablet Pick),        */
+	0x95, 0x03,       /*      Report Count (3),           */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0x95, 0x04,       /*      Report Count (4),           */
+	0x81, 0x03,       /*      Input (Constant, Variable), */
+	0x09, 0x32,       /*      Usage (In Range),           */
+	0x95, 0x01,       /*      Report Count (1),           */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0x75, 0x10,       /*      Report Size (16),           */
+	0x95, 0x01,       /*      Report Count (1),           */
+	0xA4,             /*      Push,                       */
+	0x05, 0x01,       /*      Usage Page (Desktop),       */
+	0x55, 0xFD,       /*      Unit Exponent (-3),         */
+	0x65, 0x13,       /*      Unit (Inch),                */
+	0x34,             /*      Physical Minimum (0),       */
+	0x09, 0x30,       /*      Usage (X),                  */
+	0x46, 0x40, 0x1F, /*      Physical Maximum (8000),    */
+	0x26, 0x00, 0x50, /*      Logical Maximum (20480),    */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0x09, 0x31,       /*      Usage (Y),                  */
+	0x46, 0x70, 0x17, /*      Physical Maximum (6000),    */
+	0x26, 0x00, 0x3C, /*      Logical Maximum (15360),    */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0xB4,             /*      Pop,                        */
+	0x09, 0x30,       /*      Usage (Tip Pressure),       */
+	0x26, 0xFF, 0x03, /*      Logical Maximum (1023),     */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0xC0,             /*    End Collection,               */
+	0xC0,             /*  End Collection,                 */
+	0x05, 0x01,       /*  Usage Page (Desktop),           */
+	0x09, 0x02,       /*  Usage (Mouse),                  */
+	0xA1, 0x01,       /*  Collection (Application),       */
+	0x85, 0x11,       /*    Report ID (17),               */
+	0x09, 0x01,       /*    Usage (Pointer),              */
+	0xA0,             /*    Collection (Physical),        */
+	0x14,             /*      Logical Minimum (0),        */
+	0xA4,             /*      Push,                       */
+	0x05, 0x09,       /*      Usage Page (Button),        */
+	0x75, 0x01,       /*      Report Size (1),            */
+	0x19, 0x01,       /*      Usage Minimum (01h),        */
+	0x29, 0x03,       /*      Usage Maximum (03h),        */
+	0x25, 0x01,       /*      Logical Maximum (1),        */
+	0x95, 0x03,       /*      Report Count (3),           */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0x95, 0x05,       /*      Report Count (5),           */
+	0x81, 0x01,       /*      Input (Constant),           */
+	0xB4,             /*      Pop,                        */
+	0x95, 0x01,       /*      Report Count (1),           */
+	0xA4,             /*      Push,                       */
+	0x55, 0xFD,       /*      Unit Exponent (-3),         */
+	0x65, 0x13,       /*      Unit (Inch),                */
+	0x34,             /*      Physical Minimum (0),       */
+	0x75, 0x10,       /*      Report Size (16),           */
+	0x09, 0x30,       /*      Usage (X),                  */
+	0x46, 0x40, 0x1F, /*      Physical Maximum (8000),    */
+	0x26, 0x00, 0x50, /*      Logical Maximum (20480),    */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0x09, 0x31,       /*      Usage (Y),                  */
+	0x46, 0x70, 0x17, /*      Physical Maximum (6000),    */
+	0x26, 0x00, 0x3C, /*      Logical Maximum (15360),    */
+	0x81, 0x02,       /*      Input (Variable),           */
+	0xB4,             /*      Pop,                        */
+	0x75, 0x08,       /*      Report Size (8),            */
+	0x09, 0x38,       /*      Usage (Wheel),              */
+	0x15, 0xFF,       /*      Logical Minimum (-1),       */
+	0x25, 0x01,       /*      Logical Maximum (1),        */
+	0x81, 0x06,       /*      Input (Variable, Relative), */
+	0x81, 0x01,       /*      Input (Constant),           */
+	0xC0,             /*    End Collection,               */
+	0xC0              /*  End Collection                  */
+};
+
+/* Original MousePen i608X v2 report descriptor size */
+#define MOUSEPEN_I608X_V2_RDESC_ORIG_SIZE	482
+
+/* Fixed MousePen i608X v2 report descriptor */
+static __u8 mousepen_i608x_v2_rdesc_fixed[] = {
+	0x06, 0x00, 0xFF,             /*  Usage Page (FF00h),             */
+	0x09, 0x01,                   /*  Usage (01h),                    */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x05,                   /*    Report ID (5),                */
+	0x09, 0x01,                   /*    Usage (01h),                  */
+	0x15, 0x80,                   /*    Logical Minimum (-128),       */
+	0x25, 0x7F,                   /*    Logical Maximum (127),        */
+	0x75, 0x08,                   /*    Report Size (8),              */
+	0x95, 0x07,                   /*    Report Count (7),             */
+	0xB1, 0x02,                   /*    Feature (Variable),           */
+	0xC0,                         /*  End Collection,                 */
+	0x05, 0x0D,                   /*  Usage Page (Digitizer),         */
+	0x09, 0x01,                   /*  Usage (Digitizer),              */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x10,                   /*    Report ID (16),               */
+	0x09, 0x20,                   /*    Usage (Stylus),               */
+	0xA0,                         /*    Collection (Physical),        */
+	0x14,                         /*      Logical Minimum (0),        */
+	0x25, 0x01,                   /*      Logical Maximum (1),        */
+	0x75, 0x01,                   /*      Report Size (1),            */
+	0x09, 0x42,                   /*      Usage (Tip Switch),         */
+	0x09, 0x44,                   /*      Usage (Barrel Switch),      */
+	0x09, 0x46,                   /*      Usage (Tablet Pick),        */
+	0x95, 0x03,                   /*      Report Count (3),           */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x95, 0x04,                   /*      Report Count (4),           */
+	0x81, 0x03,                   /*      Input (Constant, Variable), */
+	0x09, 0x32,                   /*      Usage (In Range),           */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x75, 0x10,                   /*      Report Size (16),           */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0xA4,                         /*      Push,                       */
+	0x05, 0x01,                   /*      Usage Page (Desktop),       */
+	0x55, 0xFD,                   /*      Unit Exponent (-3),         */
+	0x65, 0x13,                   /*      Unit (Inch),                */
+	0x34,                         /*      Physical Minimum (0),       */
+	0x09, 0x30,                   /*      Usage (X),                  */
+	0x46, 0x40, 0x1F,             /*      Physical Maximum (8000),    */
+	0x27, 0x00, 0xA0, 0x00, 0x00, /*      Logical Maximum (40960),    */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x09, 0x31,                   /*      Usage (Y),                  */
+	0x46, 0x70, 0x17,             /*      Physical Maximum (6000),    */
+	0x26, 0x00, 0x78,             /*      Logical Maximum (30720),    */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0xB4,                         /*      Pop,                        */
+	0x09, 0x30,                   /*      Usage (Tip Pressure),       */
+	0x26, 0xFF, 0x07,             /*      Logical Maximum (2047),     */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0xC0,                         /*    End Collection,               */
+	0xC0,                         /*  End Collection,                 */
+	0x05, 0x01,                   /*  Usage Page (Desktop),           */
+	0x09, 0x02,                   /*  Usage (Mouse),                  */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x11,                   /*    Report ID (17),               */
+	0x09, 0x01,                   /*    Usage (Pointer),              */
+	0xA0,                         /*    Collection (Physical),        */
+	0x14,                         /*      Logical Minimum (0),        */
+	0xA4,                         /*      Push,                       */
+	0x05, 0x09,                   /*      Usage Page (Button),        */
+	0x75, 0x01,                   /*      Report Size (1),            */
+	0x19, 0x01,                   /*      Usage Minimum (01h),        */
+	0x29, 0x03,                   /*      Usage Maximum (03h),        */
+	0x25, 0x01,                   /*      Logical Maximum (1),        */
+	0x95, 0x03,                   /*      Report Count (3),           */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x95, 0x05,                   /*      Report Count (5),           */
+	0x81, 0x01,                   /*      Input (Constant),           */
+	0xB4,                         /*      Pop,                        */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0xA4,                         /*      Push,                       */
+	0x55, 0xFD,                   /*      Unit Exponent (-3),         */
+	0x65, 0x13,                   /*      Unit (Inch),                */
+	0x34,                         /*      Physical Minimum (0),       */
+	0x75, 0x10,                   /*      Report Size (16),           */
+	0x09, 0x30,                   /*      Usage (X),                  */
+	0x46, 0x40, 0x1F,             /*      Physical Maximum (8000),    */
+	0x27, 0x00, 0xA0, 0x00, 0x00, /*      Logical Maximum (40960),    */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x09, 0x31,                   /*      Usage (Y),                  */
+	0x46, 0x70, 0x17,             /*      Physical Maximum (6000),    */
+	0x26, 0x00, 0x78,             /*      Logical Maximum (30720),    */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0xB4,                         /*      Pop,                        */
+	0x75, 0x08,                   /*      Report Size (8),            */
+	0x09, 0x38,                   /*      Usage (Wheel),              */
+	0x15, 0xFF,                   /*      Logical Minimum (-1),       */
+	0x25, 0x01,                   /*      Logical Maximum (1),        */
+	0x81, 0x06,                   /*      Input (Variable, Relative), */
+	0x81, 0x01,                   /*      Input (Constant),           */
+	0xC0,                         /*    End Collection,               */
+	0xC0                          /*  End Collection                  */
+};
+
+/* Original EasyPen M610X report descriptor size */
+#define EASYPEN_M610X_RDESC_ORIG_SIZE	476
+
+/* Fixed EasyPen M610X report descriptor */
+static __u8 easypen_m610x_rdesc_fixed[] = {
+	0x06, 0x00, 0xFF,             /*  Usage Page (FF00h),             */
+	0x09, 0x01,                   /*  Usage (01h),                    */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x05,                   /*    Report ID (5),                */
+	0x09, 0x01,                   /*    Usage (01h),                  */
+	0x15, 0x80,                   /*    Logical Minimum (-128),       */
+	0x25, 0x7F,                   /*    Logical Maximum (127),        */
+	0x75, 0x08,                   /*    Report Size (8),              */
+	0x95, 0x07,                   /*    Report Count (7),             */
+	0xB1, 0x02,                   /*    Feature (Variable),           */
+	0xC0,                         /*  End Collection,                 */
+	0x05, 0x0D,                   /*  Usage Page (Digitizer),         */
+	0x09, 0x01,                   /*  Usage (Digitizer),              */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x10,                   /*    Report ID (16),               */
+	0x09, 0x20,                   /*    Usage (Stylus),               */
+	0xA0,                         /*    Collection (Physical),        */
+	0x14,                         /*      Logical Minimum (0),        */
+	0x25, 0x01,                   /*      Logical Maximum (1),        */
+	0x75, 0x01,                   /*      Report Size (1),            */
+	0x09, 0x42,                   /*      Usage (Tip Switch),         */
+	0x09, 0x44,                   /*      Usage (Barrel Switch),      */
+	0x09, 0x46,                   /*      Usage (Tablet Pick),        */
+	0x95, 0x03,                   /*      Report Count (3),           */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x95, 0x04,                   /*      Report Count (4),           */
+	0x81, 0x03,                   /*      Input (Constant, Variable), */
+	0x09, 0x32,                   /*      Usage (In Range),           */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x75, 0x10,                   /*      Report Size (16),           */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0xA4,                         /*      Push,                       */
+	0x05, 0x01,                   /*      Usage Page (Desktop),       */
+	0x55, 0xFD,                   /*      Unit Exponent (-3),         */
+	0x65, 0x13,                   /*      Unit (Inch),                */
+	0x34,                         /*      Physical Minimum (0),       */
+	0x09, 0x30,                   /*      Usage (X),                  */
+	0x46, 0x10, 0x27,             /*      Physical Maximum (10000),   */
+	0x27, 0x00, 0xA0, 0x00, 0x00, /*      Logical Maximum (40960),    */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x09, 0x31,                   /*      Usage (Y),                  */
+	0x46, 0x6A, 0x18,             /*      Physical Maximum (6250),    */
+	0x26, 0x00, 0x64,             /*      Logical Maximum (25600),    */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0xB4,                         /*      Pop,                        */
+	0x09, 0x30,                   /*      Usage (Tip Pressure),       */
+	0x26, 0xFF, 0x03,             /*      Logical Maximum (1023),     */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0xC0,                         /*    End Collection,               */
+	0xC0,                         /*  End Collection,                 */
+	0x05, 0x0C,                   /*  Usage Page (Consumer),          */
+	0x09, 0x01,                   /*  Usage (Consumer Control),       */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x12,                   /*    Report ID (18),               */
+	0x14,                         /*    Logical Minimum (0),          */
+	0x25, 0x01,                   /*    Logical Maximum (1),          */
+	0x75, 0x01,                   /*    Report Size (1),              */
+	0x95, 0x04,                   /*    Report Count (4),             */
+	0x0A, 0x1A, 0x02,             /*    Usage (AC Undo),              */
+	0x0A, 0x79, 0x02,             /*    Usage (AC Redo Or Repeat),    */
+	0x0A, 0x2D, 0x02,             /*    Usage (AC Zoom In),           */
+	0x0A, 0x2E, 0x02,             /*    Usage (AC Zoom Out),          */
+	0x81, 0x02,                   /*    Input (Variable),             */
+	0x95, 0x01,                   /*    Report Count (1),             */
+	0x75, 0x14,                   /*    Report Size (20),             */
+	0x81, 0x03,                   /*    Input (Constant, Variable),   */
+	0x75, 0x20,                   /*    Report Size (32),             */
+	0x81, 0x03,                   /*    Input (Constant, Variable),   */
+	0xC0                          /*  End Collection                  */
+};
+
+
+/* Original PenSketch M912 report descriptor size */
+#define PENSKETCH_M912_RDESC_ORIG_SIZE	482
+
+/* Fixed PenSketch M912 report descriptor */
+static __u8 pensketch_m912_rdesc_fixed[] = {
+	0x05, 0x01,                   /*  Usage Page (Desktop),           */
+	0x08,                         /*  Usage (00h),                    */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x05,                   /*    Report ID (5),                */
+	0x06, 0x00, 0xFF,             /*    Usage Page (FF00h),           */
+	0x09, 0x01,                   /*    Usage (01h),                  */
+	0x15, 0x81,                   /*    Logical Minimum (-127),       */
+	0x25, 0x7F,                   /*    Logical Maximum (127),        */
+	0x75, 0x08,                   /*    Report Size (8),              */
+	0x95, 0x07,                   /*    Report Count (7),             */
+	0xB1, 0x02,                   /*    Feature (Variable),           */
+	0xC0,                         /*  End Collection,                 */
+	0x05, 0x0D,                   /*  Usage Page (Digitizer),         */
+	0x09, 0x01,                   /*  Usage (Digitizer),              */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x10,                   /*    Report ID (16),               */
+	0x09, 0x20,                   /*    Usage (Stylus),               */
+	0xA0,                         /*    Collection (Physical),        */
+	0x09, 0x42,                   /*      Usage (Tip Switch),         */
+	0x09, 0x44,                   /*      Usage (Barrel Switch),      */
+	0x09, 0x46,                   /*      Usage (Tablet Pick),        */
+	0x14,                         /*      Logical Minimum (0),        */
+	0x25, 0x01,                   /*      Logical Maximum (1),        */
+	0x75, 0x01,                   /*      Report Size (1),            */
+	0x95, 0x03,                   /*      Report Count (3),           */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x95, 0x04,                   /*      Report Count (4),           */
+	0x81, 0x03,                   /*      Input (Constant, Variable), */
+	0x09, 0x32,                   /*      Usage (In Range),           */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x75, 0x10,                   /*      Report Size (16),           */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0xA4,                         /*      Push,                       */
+	0x05, 0x01,                   /*      Usage Page (Desktop),       */
+	0x55, 0xFD,                   /*      Unit Exponent (-3),         */
+	0x65, 0x13,                   /*      Unit (Inch),                */
+	0x14,                         /*      Logical Minimum (0),        */
+	0x34,                         /*      Physical Minimum (0),       */
+	0x09, 0x30,                   /*      Usage (X),                  */
+	0x27, 0x00, 0xF0, 0x00, 0x00, /*      Logical Maximum (61440),    */
+	0x46, 0xE0, 0x2E,             /*      Physical Maximum (12000),   */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x09, 0x31,                   /*      Usage (Y),                  */
+	0x27, 0x00, 0xB4, 0x00, 0x00, /*      Logical Maximum (46080),    */
+	0x46, 0x28, 0x23,             /*      Physical Maximum (9000),    */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0xB4,                         /*      Pop,                        */
+	0x09, 0x30,                   /*      Usage (Tip Pressure),       */
+	0x14,                         /*      Logical Minimum (0),        */
+	0x26, 0xFF, 0x07,             /*      Logical Maximum (2047),     */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0xC0,                         /*    End Collection,               */
+	0xC0,                         /*  End Collection,                 */
+	0x05, 0x0D,                   /*  Usage Page (Digitizer),         */
+	0x09, 0x21,                   /*  Usage (Puck),                   */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x11,                   /*    Report ID (17),               */
+	0x09, 0x21,                   /*    Usage (Puck),                 */
+	0xA0,                         /*    Collection (Physical),        */
+	0x05, 0x09,                   /*      Usage Page (Button),        */
+	0x75, 0x01,                   /*      Report Size (1),            */
+	0x19, 0x01,                   /*      Usage Minimum (01h),        */
+	0x29, 0x03,                   /*      Usage Maximum (03h),        */
+	0x14,                         /*      Logical Minimum (0),        */
+	0x25, 0x01,                   /*      Logical Maximum (1),        */
+	0x95, 0x03,                   /*      Report Count (3),           */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x95, 0x04,                   /*      Report Count (4),           */
+	0x81, 0x01,                   /*      Input (Constant),           */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0x0B, 0x32, 0x00, 0x0D, 0x00, /*      Usage (Digitizer In Range), */
+	0x14,                         /*      Logical Minimum (0),        */
+	0x25, 0x01,                   /*      Logical Maximum (1),        */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0xA4,                         /*      Push,                       */
+	0x05, 0x01,                   /*      Usage Page (Desktop),       */
+	0x75, 0x10,                   /*      Report Size (16),           */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0x55, 0xFD,                   /*      Unit Exponent (-3),         */
+	0x65, 0x13,                   /*      Unit (Inch),                */
+	0x14,                         /*      Logical Minimum (0),        */
+	0x34,                         /*      Physical Minimum (0),       */
+	0x09, 0x30,                   /*      Usage (X),                  */
+	0x27, 0x00, 0xF0, 0x00, 0x00, /*      Logical Maximum (61440),    */
+	0x46, 0xE0, 0x2E,             /*      Physical Maximum (12000),   */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x09, 0x31,                   /*      Usage (Y),                  */
+	0x27, 0x00, 0xB4, 0x00, 0x00, /*      Logical Maximum (46080),    */
+	0x46, 0x28, 0x23,             /*      Physical Maximum (9000),    */
+	0x81, 0x02,                   /*      Input (Variable),           */
+	0x09, 0x38,                   /*      Usage (Wheel),              */
+	0x75, 0x08,                   /*      Report Size (8),            */
+	0x95, 0x01,                   /*      Report Count (1),           */
+	0x15, 0xFF,                   /*      Logical Minimum (-1),       */
+	0x25, 0x01,                   /*      Logical Maximum (1),        */
+	0x34,                         /*      Physical Minimum (0),       */
+	0x44,                         /*      Physical Maximum (0),       */
+	0x81, 0x06,                   /*      Input (Variable, Relative), */
+	0xB4,                         /*      Pop,                        */
+	0xC0,                         /*    End Collection,               */
+	0xC0,                         /*  End Collection,                 */
+	0x05, 0x0C,                   /*  Usage Page (Consumer),          */
+	0x09, 0x01,                   /*  Usage (Consumer Control),       */
+	0xA1, 0x01,                   /*  Collection (Application),       */
+	0x85, 0x12,                   /*    Report ID (18),               */
+	0x14,                         /*    Logical Minimum (0),          */
+	0x25, 0x01,                   /*    Logical Maximum (1),          */
+	0x75, 0x01,                   /*    Report Size (1),              */
+	0x95, 0x08,                   /*    Report Count (8),             */
+	0x05, 0x0C,                   /*    Usage Page (Consumer),        */
+	0x0A, 0x6A, 0x02,             /*    Usage (AC Delete),            */
+	0x0A, 0x1A, 0x02,             /*    Usage (AC Undo),              */
+	0x0A, 0x01, 0x02,             /*    Usage (AC New),               */
+	0x0A, 0x2F, 0x02,             /*    Usage (AC Zoom),              */
+	0x0A, 0x25, 0x02,             /*    Usage (AC Forward),           */
+	0x0A, 0x24, 0x02,             /*    Usage (AC Back),              */
+	0x0A, 0x2D, 0x02,             /*    Usage (AC Zoom In),           */
+	0x0A, 0x2E, 0x02,             /*    Usage (AC Zoom Out),          */
+	0x81, 0x02,                   /*    Input (Variable),             */
+	0x95, 0x30,                   /*    Report Count (48),            */
+	0x81, 0x03,                   /*    Input (Constant, Variable),   */
+	0xC0                          /*  End Collection                  */
+};
+
+/* Original EasyPen M406XE report descriptor size */
+#define EASYPEN_M406XE_RDESC_ORIG_SIZE	476
+
+/* Fixed EasyPen M406XE  report descriptor */
+static __u8 easypen_m406xe_rdesc_fixed[] = {
+	0x05, 0x01,         /*  Usage Page (Desktop),               */
+	0x09, 0x01,         /*  Usage (01h),                        */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x05,         /*      Report ID (5),                  */
+	0x09, 0x01,         /*      Usage (01h),                    */
+	0x15, 0x80,         /*      Logical Minimum (-128),         */
+	0x25, 0x7F,         /*      Logical Maximum (127),          */
+	0x75, 0x08,         /*      Report Size (8),                */
+	0x95, 0x07,         /*      Report Count (7),               */
+	0xB1, 0x02,         /*      Feature (Variable),             */
+	0xC0,               /*  End Collection,                     */
+	0x05, 0x0D,         /*  Usage Page (Digitizer),             */
+	0x09, 0x01,         /*  Usage (Digitizer),                  */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x10,         /*      Report ID (16),                 */
+	0x09, 0x20,         /*      Usage (Stylus),                 */
+	0xA0,               /*      Collection (Physical),          */
+	0x14,               /*          Logical Minimum (0),        */
+	0x25, 0x01,         /*          Logical Maximum (1),        */
+	0x75, 0x01,         /*          Report Size (1),            */
+	0x09, 0x42,         /*          Usage (Tip Switch),         */
+	0x09, 0x44,         /*          Usage (Barrel Switch),      */
+	0x09, 0x46,         /*          Usage (Tablet Pick),        */
+	0x95, 0x03,         /*          Report Count (3),           */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x95, 0x04,         /*          Report Count (4),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0x09, 0x32,         /*          Usage (In Range),           */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x75, 0x10,         /*          Report Size (16),           */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0xA4,               /*          Push,                       */
+	0x05, 0x01,         /*          Usage Page (Desktop),       */
+	0x55, 0xFD,         /*          Unit Exponent (-3),         */
+	0x65, 0x13,         /*          Unit (Inch),                */
+	0x34,               /*          Physical Minimum (0),       */
+	0x09, 0x30,         /*          Usage (X),                  */
+	0x46, 0x70, 0x17,   /*          Physical Maximum (6000),    */
+	0x26, 0x00, 0x3C,   /*          Logical Maximum (15360),    */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x09, 0x31,         /*          Usage (Y),                  */
+	0x46, 0xA0, 0x0F,   /*          Physical Maximum (4000),    */
+	0x26, 0x00, 0x28,   /*          Logical Maximum (10240),    */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0xB4,               /*          Pop,                        */
+	0x09, 0x30,         /*          Usage (Tip Pressure),       */
+	0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),     */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0xC0,               /*      End Collection,                 */
+	0xC0,               /*  End Collection                      */
+	0x05, 0x0C,         /*  Usage Page (Consumer),              */
+	0x09, 0x01,         /*  Usage (Consumer Control),           */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x12,         /*      Report ID (18),                 */
+	0x14,               /*      Logical Minimum (0),            */
+	0x25, 0x01,         /*      Logical Maximum (1),            */
+	0x75, 0x01,         /*      Report Size (1),                */
+	0x95, 0x04,         /*      Report Count (4),               */
+	0x0A, 0x79, 0x02,   /*      Usage (AC Redo Or Repeat),      */
+	0x0A, 0x1A, 0x02,   /*      Usage (AC Undo),                */
+	0x0A, 0x2D, 0x02,   /*      Usage (AC Zoom In),             */
+	0x0A, 0x2E, 0x02,   /*      Usage (AC Zoom Out),            */
+	0x81, 0x02,         /*      Input (Variable),               */
+	0x95, 0x34,         /*      Report Count (52),              */
+	0x81, 0x03,         /*      Input (Constant, Variable),     */
+	0xC0                /*  End Collection                      */
+};
+
+static __u8 *kye_consumer_control_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize, int offset, const char *device_name) {
+	/*
+	 * the fixup that need to be done:
+	 *   - change Usage Maximum in the Consumer Control
+	 *     (report ID 3) to a reasonable value
+	 */
+	if (*rsize >= offset + 31 &&
+	    /* Usage Page (Consumer Devices) */
+	    rdesc[offset] == 0x05 && rdesc[offset + 1] == 0x0c &&
+	    /* Usage (Consumer Control) */
+	    rdesc[offset + 2] == 0x09 && rdesc[offset + 3] == 0x01 &&
+	    /*   Usage Maximum > 12287 */
+	    rdesc[offset + 10] == 0x2a && rdesc[offset + 12] > 0x2f) {
+		hid_info(hdev, "fixing up %s report descriptor\n", device_name);
+		rdesc[offset + 12] = 0x2f;
+	}
+	return rdesc;
+}
+
+static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	switch (hdev->product) {
+	case USB_DEVICE_ID_KYE_ERGO_525V:
+		/* the fixups that need to be done:
+		 *   - change led usage page to button for extra buttons
+		 *   - report size 8 count 1 must be size 1 count 8 for button
+		 *     bitfield
+		 *   - change the button usage range to 4-7 for the extra
+		 *     buttons
+		 */
+		if (*rsize >= 75 &&
+			rdesc[61] == 0x05 && rdesc[62] == 0x08 &&
+			rdesc[63] == 0x19 && rdesc[64] == 0x08 &&
+			rdesc[65] == 0x29 && rdesc[66] == 0x0f &&
+			rdesc[71] == 0x75 && rdesc[72] == 0x08 &&
+			rdesc[73] == 0x95 && rdesc[74] == 0x01) {
+			hid_info(hdev,
+				 "fixing up Kye/Genius Ergo Mouse "
+				 "report descriptor\n");
+			rdesc[62] = 0x09;
+			rdesc[64] = 0x04;
+			rdesc[66] = 0x07;
+			rdesc[72] = 0x01;
+			rdesc[74] = 0x08;
+		}
+		break;
+	case USB_DEVICE_ID_KYE_EASYPEN_I405X:
+		if (*rsize == EASYPEN_I405X_RDESC_ORIG_SIZE) {
+			rdesc = easypen_i405x_rdesc_fixed;
+			*rsize = sizeof(easypen_i405x_rdesc_fixed);
+		}
+		break;
+	case USB_DEVICE_ID_KYE_MOUSEPEN_I608X:
+		if (*rsize == MOUSEPEN_I608X_RDESC_ORIG_SIZE) {
+			rdesc = mousepen_i608x_rdesc_fixed;
+			*rsize = sizeof(mousepen_i608x_rdesc_fixed);
+		}
+		break;
+	case USB_DEVICE_ID_KYE_MOUSEPEN_I608X_V2:
+		if (*rsize == MOUSEPEN_I608X_V2_RDESC_ORIG_SIZE) {
+			rdesc = mousepen_i608x_v2_rdesc_fixed;
+			*rsize = sizeof(mousepen_i608x_v2_rdesc_fixed);
+		}
+		break;
+	case USB_DEVICE_ID_KYE_EASYPEN_M610X:
+		if (*rsize == EASYPEN_M610X_RDESC_ORIG_SIZE) {
+			rdesc = easypen_m610x_rdesc_fixed;
+			*rsize = sizeof(easypen_m610x_rdesc_fixed);
+		}
+		break;
+	case USB_DEVICE_ID_KYE_EASYPEN_M406XE:
+		if (*rsize == EASYPEN_M406XE_RDESC_ORIG_SIZE) {
+			rdesc = easypen_m406xe_rdesc_fixed;
+			*rsize = sizeof(easypen_m406xe_rdesc_fixed);
+		}
+		break;
+	case USB_DEVICE_ID_KYE_PENSKETCH_M912:
+		if (*rsize == PENSKETCH_M912_RDESC_ORIG_SIZE) {
+			rdesc = pensketch_m912_rdesc_fixed;
+			*rsize = sizeof(pensketch_m912_rdesc_fixed);
+		}
+		break;
+	case USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE:
+		rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104,
+					"Genius Gila Gaming Mouse");
+		break;
+	case USB_DEVICE_ID_GENIUS_GX_IMPERATOR:
+		rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 83,
+					"Genius Gx Imperator Keyboard");
+		break;
+	case USB_DEVICE_ID_GENIUS_MANTICORE:
+		rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104,
+					"Genius Manticore Keyboard");
+		break;
+	}
+	return rdesc;
+}
+
+/**
+ * kye_tablet_enable() - Enable fully-functional tablet mode by setting a special feature report.
+ *
+ * @hdev:	HID device
+ *
+ * The specific report ID and data were discovered by sniffing the
+ * Windows driver traffic.
+ */
+static int kye_tablet_enable(struct hid_device *hdev)
+{
+	struct list_head *list;
+	struct list_head *head;
+	struct hid_report *report;
+	__s32 *value;
+
+	list = &hdev->report_enum[HID_FEATURE_REPORT].report_list;
+	list_for_each(head, list) {
+		report = list_entry(head, struct hid_report, list);
+		if (report->id == 5)
+			break;
+	}
+
+	if (head == list) {
+		hid_err(hdev, "tablet-enabling feature report not found\n");
+		return -ENODEV;
+	}
+
+	if (report->maxfield < 1 || report->field[0]->report_count < 7) {
+		hid_err(hdev, "invalid tablet-enabling feature report\n");
+		return -ENODEV;
+	}
+
+	value = report->field[0]->value;
+
+	value[0] = 0x12;
+	value[1] = 0x10;
+	value[2] = 0x11;
+	value[3] = 0x12;
+	value[4] = 0x00;
+	value[5] = 0x00;
+	value[6] = 0x00;
+	hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
+
+	return 0;
+}
+
+static int kye_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		goto err;
+	}
+
+	switch (id->product) {
+	case USB_DEVICE_ID_KYE_EASYPEN_I405X:
+	case USB_DEVICE_ID_KYE_MOUSEPEN_I608X:
+	case USB_DEVICE_ID_KYE_MOUSEPEN_I608X_V2:
+	case USB_DEVICE_ID_KYE_EASYPEN_M610X:
+	case USB_DEVICE_ID_KYE_EASYPEN_M406XE:
+	case USB_DEVICE_ID_KYE_PENSKETCH_M912:
+		ret = kye_tablet_enable(hdev);
+		if (ret) {
+			hid_err(hdev, "tablet enabling failed\n");
+			goto enabling_err;
+		}
+		break;
+	case USB_DEVICE_ID_GENIUS_MANTICORE:
+		/*
+		 * The manticore keyboard needs to have all the interfaces
+		 * opened at least once to be fully functional.
+		 */
+		if (hid_hw_open(hdev))
+			hid_hw_close(hdev);
+		break;
+	}
+
+	return 0;
+enabling_err:
+	hid_hw_stop(hdev);
+err:
+	return ret;
+}
+
+static const struct hid_device_id kye_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_KYE_EASYPEN_I405X) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_KYE_MOUSEPEN_I608X_V2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_KYE_EASYPEN_M610X) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_KYE_EASYPEN_M406XE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_GENIUS_MANTICORE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_KYE_PENSKETCH_M912) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, kye_devices);
+
+static struct hid_driver kye_driver = {
+	.name = "kye",
+	.id_table = kye_devices,
+	.probe = kye_probe,
+	.report_fixup = kye_report_fixup,
+};
+module_hid_driver(kye_driver);
+
+MODULE_LICENSE("GPL");