Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 956 insertions, 0 deletions

diff --git a/drivers/hid/hid-lg-g15.c b/drivers/hid/hid-lg-g15.c
new file mode 100644
index 000000000..c8f82bcbf
--- /dev/null
+++ b/drivers/hid/hid-lg-g15.c
@@ -0,0 +1,956 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  HID driver for gaming keys on Logitech gaming keyboards (such as the G15)
+ *
+ *  Copyright (c) 2019 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+
+#include "hid-ids.h"
+
+#define LG_G15_TRANSFER_BUF_SIZE	20
+
+#define LG_G15_FEATURE_REPORT		0x02
+
+#define LG_G510_FEATURE_M_KEYS_LEDS	0x04
+#define LG_G510_FEATURE_BACKLIGHT_RGB	0x05
+#define LG_G510_FEATURE_POWER_ON_RGB	0x06
+
+enum lg_g15_model {
+	LG_G15,
+	LG_G15_V2,
+	LG_G510,
+	LG_G510_USB_AUDIO,
+	LG_Z10,
+};
+
+enum lg_g15_led_type {
+	LG_G15_KBD_BRIGHTNESS,
+	LG_G15_LCD_BRIGHTNESS,
+	LG_G15_BRIGHTNESS_MAX,
+	LG_G15_MACRO_PRESET1 = 2,
+	LG_G15_MACRO_PRESET2,
+	LG_G15_MACRO_PRESET3,
+	LG_G15_MACRO_RECORD,
+	LG_G15_LED_MAX
+};
+
+struct lg_g15_led {
+	struct led_classdev cdev;
+	enum led_brightness brightness;
+	enum lg_g15_led_type led;
+	u8 red, green, blue;
+};
+
+struct lg_g15_data {
+	/* Must be first for proper dma alignment */
+	u8 transfer_buf[LG_G15_TRANSFER_BUF_SIZE];
+	/* Protects the transfer_buf and led brightness */
+	struct mutex mutex;
+	struct work_struct work;
+	struct input_dev *input;
+	struct hid_device *hdev;
+	enum lg_g15_model model;
+	struct lg_g15_led leds[LG_G15_LED_MAX];
+	bool game_mode_enabled;
+};
+
+/******** G15 and G15 v2 LED functions ********/
+
+static int lg_g15_update_led_brightness(struct lg_g15_data *g15)
+{
+	int ret;
+
+	ret = hid_hw_raw_request(g15->hdev, LG_G15_FEATURE_REPORT,
+				 g15->transfer_buf, 4,
+				 HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+	if (ret != 4) {
+		hid_err(g15->hdev, "Error getting LED brightness: %d\n", ret);
+		return (ret < 0) ? ret : -EIO;
+	}
+
+	g15->leds[LG_G15_KBD_BRIGHTNESS].brightness = g15->transfer_buf[1];
+	g15->leds[LG_G15_LCD_BRIGHTNESS].brightness = g15->transfer_buf[2];
+
+	g15->leds[LG_G15_MACRO_PRESET1].brightness =
+		!(g15->transfer_buf[3] & 0x01);
+	g15->leds[LG_G15_MACRO_PRESET2].brightness =
+		!(g15->transfer_buf[3] & 0x02);
+	g15->leds[LG_G15_MACRO_PRESET3].brightness =
+		!(g15->transfer_buf[3] & 0x04);
+	g15->leds[LG_G15_MACRO_RECORD].brightness =
+		!(g15->transfer_buf[3] & 0x08);
+
+	return 0;
+}
+
+static enum led_brightness lg_g15_led_get(struct led_classdev *led_cdev)
+{
+	struct lg_g15_led *g15_led =
+		container_of(led_cdev, struct lg_g15_led, cdev);
+	struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
+	enum led_brightness brightness;
+
+	mutex_lock(&g15->mutex);
+	lg_g15_update_led_brightness(g15);
+	brightness = g15->leds[g15_led->led].brightness;
+	mutex_unlock(&g15->mutex);
+
+	return brightness;
+}
+
+static int lg_g15_led_set(struct led_classdev *led_cdev,
+			  enum led_brightness brightness)
+{
+	struct lg_g15_led *g15_led =
+		container_of(led_cdev, struct lg_g15_led, cdev);
+	struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
+	u8 val, mask = 0;
+	int i, ret;
+
+	/* Ignore LED off on unregister / keyboard unplug */
+	if (led_cdev->flags & LED_UNREGISTERING)
+		return 0;
+
+	mutex_lock(&g15->mutex);
+
+	g15->transfer_buf[0] = LG_G15_FEATURE_REPORT;
+	g15->transfer_buf[3] = 0;
+
+	if (g15_led->led < LG_G15_BRIGHTNESS_MAX) {
+		g15->transfer_buf[1] = g15_led->led + 1;
+		g15->transfer_buf[2] = brightness << (g15_led->led * 4);
+	} else {
+		for (i = LG_G15_MACRO_PRESET1; i < LG_G15_LED_MAX; i++) {
+			if (i == g15_led->led)
+				val = brightness;
+			else
+				val = g15->leds[i].brightness;
+
+			if (val)
+				mask |= 1 << (i - LG_G15_MACRO_PRESET1);
+		}
+
+		g15->transfer_buf[1] = 0x04;
+		g15->transfer_buf[2] = ~mask;
+	}
+
+	ret = hid_hw_raw_request(g15->hdev, LG_G15_FEATURE_REPORT,
+				 g15->transfer_buf, 4,
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	if (ret == 4) {
+		/* Success */
+		g15_led->brightness = brightness;
+		ret = 0;
+	} else {
+		hid_err(g15->hdev, "Error setting LED brightness: %d\n", ret);
+		ret = (ret < 0) ? ret : -EIO;
+	}
+
+	mutex_unlock(&g15->mutex);
+
+	return ret;
+}
+
+static void lg_g15_leds_changed_work(struct work_struct *work)
+{
+	struct lg_g15_data *g15 = container_of(work, struct lg_g15_data, work);
+	enum led_brightness old_brightness[LG_G15_BRIGHTNESS_MAX];
+	enum led_brightness brightness[LG_G15_BRIGHTNESS_MAX];
+	int i, ret;
+
+	mutex_lock(&g15->mutex);
+	for (i = 0; i < LG_G15_BRIGHTNESS_MAX; i++)
+		old_brightness[i] = g15->leds[i].brightness;
+
+	ret = lg_g15_update_led_brightness(g15);
+
+	for (i = 0; i < LG_G15_BRIGHTNESS_MAX; i++)
+		brightness[i] = g15->leds[i].brightness;
+	mutex_unlock(&g15->mutex);
+
+	if (ret)
+		return;
+
+	for (i = 0; i < LG_G15_BRIGHTNESS_MAX; i++) {
+		if (brightness[i] == old_brightness[i])
+			continue;
+
+		led_classdev_notify_brightness_hw_changed(&g15->leds[i].cdev,
+							  brightness[i]);
+	}
+}
+
+/******** G510 LED functions ********/
+
+static int lg_g510_get_initial_led_brightness(struct lg_g15_data *g15, int i)
+{
+	int ret, high;
+
+	ret = hid_hw_raw_request(g15->hdev, LG_G510_FEATURE_BACKLIGHT_RGB + i,
+				 g15->transfer_buf, 4,
+				 HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+	if (ret != 4) {
+		hid_err(g15->hdev, "Error getting LED brightness: %d\n", ret);
+		return (ret < 0) ? ret : -EIO;
+	}
+
+	high = max3(g15->transfer_buf[1], g15->transfer_buf[2],
+		    g15->transfer_buf[3]);
+
+	if (high) {
+		g15->leds[i].red =
+			DIV_ROUND_CLOSEST(g15->transfer_buf[1] * 255, high);
+		g15->leds[i].green =
+			DIV_ROUND_CLOSEST(g15->transfer_buf[2] * 255, high);
+		g15->leds[i].blue =
+			DIV_ROUND_CLOSEST(g15->transfer_buf[3] * 255, high);
+		g15->leds[i].brightness = high;
+	} else {
+		g15->leds[i].red   = 255;
+		g15->leds[i].green = 255;
+		g15->leds[i].blue  = 255;
+		g15->leds[i].brightness = 0;
+	}
+
+	return 0;
+}
+
+/* Must be called with g15->mutex locked */
+static int lg_g510_kbd_led_write(struct lg_g15_data *g15,
+				 struct lg_g15_led *g15_led,
+				 enum led_brightness brightness)
+{
+	int ret;
+
+	g15->transfer_buf[0] = 5 + g15_led->led;
+	g15->transfer_buf[1] =
+		DIV_ROUND_CLOSEST(g15_led->red * brightness, 255);
+	g15->transfer_buf[2] =
+		DIV_ROUND_CLOSEST(g15_led->green * brightness, 255);
+	g15->transfer_buf[3] =
+		DIV_ROUND_CLOSEST(g15_led->blue * brightness, 255);
+
+	ret = hid_hw_raw_request(g15->hdev,
+				 LG_G510_FEATURE_BACKLIGHT_RGB + g15_led->led,
+				 g15->transfer_buf, 4,
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	if (ret == 4) {
+		/* Success */
+		g15_led->brightness = brightness;
+		ret = 0;
+	} else {
+		hid_err(g15->hdev, "Error setting LED brightness: %d\n", ret);
+		ret = (ret < 0) ? ret : -EIO;
+	}
+
+	return ret;
+}
+
+static int lg_g510_kbd_led_set(struct led_classdev *led_cdev,
+			       enum led_brightness brightness)
+{
+	struct lg_g15_led *g15_led =
+		container_of(led_cdev, struct lg_g15_led, cdev);
+	struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
+	int ret;
+
+	/* Ignore LED off on unregister / keyboard unplug */
+	if (led_cdev->flags & LED_UNREGISTERING)
+		return 0;
+
+	mutex_lock(&g15->mutex);
+	ret = lg_g510_kbd_led_write(g15, g15_led, brightness);
+	mutex_unlock(&g15->mutex);
+
+	return ret;
+}
+
+static enum led_brightness lg_g510_kbd_led_get(struct led_classdev *led_cdev)
+{
+	struct lg_g15_led *g15_led =
+		container_of(led_cdev, struct lg_g15_led, cdev);
+
+	return g15_led->brightness;
+}
+
+static ssize_t color_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lg_g15_led *g15_led =
+		container_of(led_cdev, struct lg_g15_led, cdev);
+	struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
+	unsigned long value;
+	int ret;
+
+	if (count < 7 || (count == 8 && buf[7] != '\n') || count > 8)
+		return -EINVAL;
+
+	if (buf[0] != '#')
+		return -EINVAL;
+
+	ret = kstrtoul(buf + 1, 16, &value);
+	if (ret)
+		return ret;
+
+	mutex_lock(&g15->mutex);
+	g15_led->red   = (value & 0xff0000) >> 16;
+	g15_led->green = (value & 0x00ff00) >> 8;
+	g15_led->blue  = (value & 0x0000ff);
+	ret = lg_g510_kbd_led_write(g15, g15_led, g15_led->brightness);
+	mutex_unlock(&g15->mutex);
+
+	return (ret < 0) ? ret : count;
+}
+
+static ssize_t color_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lg_g15_led *g15_led =
+		container_of(led_cdev, struct lg_g15_led, cdev);
+	struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
+	ssize_t ret;
+
+	mutex_lock(&g15->mutex);
+	ret = sprintf(buf, "#%02x%02x%02x\n",
+		      g15_led->red, g15_led->green, g15_led->blue);
+	mutex_unlock(&g15->mutex);
+
+	return ret;
+}
+
+static DEVICE_ATTR_RW(color);
+
+static struct attribute *lg_g510_kbd_led_attrs[] = {
+	&dev_attr_color.attr,
+	NULL,
+};
+
+static const struct attribute_group lg_g510_kbd_led_group = {
+	.attrs = lg_g510_kbd_led_attrs,
+};
+
+static const struct attribute_group *lg_g510_kbd_led_groups[] = {
+	&lg_g510_kbd_led_group,
+	NULL,
+};
+
+static void lg_g510_leds_sync_work(struct work_struct *work)
+{
+	struct lg_g15_data *g15 = container_of(work, struct lg_g15_data, work);
+
+	mutex_lock(&g15->mutex);
+	lg_g510_kbd_led_write(g15, &g15->leds[LG_G15_KBD_BRIGHTNESS],
+			      g15->leds[LG_G15_KBD_BRIGHTNESS].brightness);
+	mutex_unlock(&g15->mutex);
+}
+
+static int lg_g510_update_mkey_led_brightness(struct lg_g15_data *g15)
+{
+	int ret;
+
+	ret = hid_hw_raw_request(g15->hdev, LG_G510_FEATURE_M_KEYS_LEDS,
+				 g15->transfer_buf, 2,
+				 HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+	if (ret != 2) {
+		hid_err(g15->hdev, "Error getting LED brightness: %d\n", ret);
+		ret = (ret < 0) ? ret : -EIO;
+	}
+
+	g15->leds[LG_G15_MACRO_PRESET1].brightness =
+		!!(g15->transfer_buf[1] & 0x80);
+	g15->leds[LG_G15_MACRO_PRESET2].brightness =
+		!!(g15->transfer_buf[1] & 0x40);
+	g15->leds[LG_G15_MACRO_PRESET3].brightness =
+		!!(g15->transfer_buf[1] & 0x20);
+	g15->leds[LG_G15_MACRO_RECORD].brightness =
+		!!(g15->transfer_buf[1] & 0x10);
+
+	return 0;
+}
+
+static enum led_brightness lg_g510_mkey_led_get(struct led_classdev *led_cdev)
+{
+	struct lg_g15_led *g15_led =
+		container_of(led_cdev, struct lg_g15_led, cdev);
+	struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
+	enum led_brightness brightness;
+
+	mutex_lock(&g15->mutex);
+	lg_g510_update_mkey_led_brightness(g15);
+	brightness = g15->leds[g15_led->led].brightness;
+	mutex_unlock(&g15->mutex);
+
+	return brightness;
+}
+
+static int lg_g510_mkey_led_set(struct led_classdev *led_cdev,
+				enum led_brightness brightness)
+{
+	struct lg_g15_led *g15_led =
+		container_of(led_cdev, struct lg_g15_led, cdev);
+	struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
+	u8 val, mask = 0;
+	int i, ret;
+
+	/* Ignore LED off on unregister / keyboard unplug */
+	if (led_cdev->flags & LED_UNREGISTERING)
+		return 0;
+
+	mutex_lock(&g15->mutex);
+
+	for (i = LG_G15_MACRO_PRESET1; i < LG_G15_LED_MAX; i++) {
+		if (i == g15_led->led)
+			val = brightness;
+		else
+			val = g15->leds[i].brightness;
+
+		if (val)
+			mask |= 0x80 >> (i - LG_G15_MACRO_PRESET1);
+	}
+
+	g15->transfer_buf[0] = LG_G510_FEATURE_M_KEYS_LEDS;
+	g15->transfer_buf[1] = mask;
+
+	ret = hid_hw_raw_request(g15->hdev, LG_G510_FEATURE_M_KEYS_LEDS,
+				 g15->transfer_buf, 2,
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	if (ret == 2) {
+		/* Success */
+		g15_led->brightness = brightness;
+		ret = 0;
+	} else {
+		hid_err(g15->hdev, "Error setting LED brightness: %d\n", ret);
+		ret = (ret < 0) ? ret : -EIO;
+	}
+
+	mutex_unlock(&g15->mutex);
+
+	return ret;
+}
+
+/******** Generic LED functions ********/
+static int lg_g15_get_initial_led_brightness(struct lg_g15_data *g15)
+{
+	int ret;
+
+	switch (g15->model) {
+	case LG_G15:
+	case LG_G15_V2:
+		return lg_g15_update_led_brightness(g15);
+	case LG_G510:
+	case LG_G510_USB_AUDIO:
+		ret = lg_g510_get_initial_led_brightness(g15, 0);
+		if (ret)
+			return ret;
+
+		ret = lg_g510_get_initial_led_brightness(g15, 1);
+		if (ret)
+			return ret;
+
+		return lg_g510_update_mkey_led_brightness(g15);
+	case LG_Z10:
+		/*
+		 * Getting the LCD backlight brightness is not supported.
+		 * Reading Feature(2) fails with -EPIPE and this crashes
+		 * the LCD and touch keys part of the speakers.
+		 */
+		return 0;
+	}
+	return -EINVAL; /* Never reached */
+}
+
+/******** Input functions ********/
+
+/* On the G15 Mark I Logitech has been quite creative with which bit is what */
+static void lg_g15_handle_lcd_menu_keys(struct lg_g15_data *g15, u8 *data)
+{
+	int i, val;
+
+	/* Most left (round/display) button below the LCD */
+	input_report_key(g15->input, KEY_KBD_LCD_MENU1, data[8] & 0x80);
+	/* 4 other buttons below the LCD */
+	for (i = 0; i < 4; i++) {
+		val = data[i + 2] & 0x80;
+		input_report_key(g15->input, KEY_KBD_LCD_MENU2 + i, val);
+	}
+}
+
+static int lg_g15_event(struct lg_g15_data *g15, u8 *data)
+{
+	int i, val;
+
+	/* G1 - G6 */
+	for (i = 0; i < 6; i++) {
+		val = data[i + 1] & (1 << i);
+		input_report_key(g15->input, KEY_MACRO1 + i, val);
+	}
+	/* G7 - G12 */
+	for (i = 0; i < 6; i++) {
+		val = data[i + 2] & (1 << i);
+		input_report_key(g15->input, KEY_MACRO7 + i, val);
+	}
+	/* G13 - G17 */
+	for (i = 0; i < 5; i++) {
+		val = data[i + 1] & (4 << i);
+		input_report_key(g15->input, KEY_MACRO13 + i, val);
+	}
+	/* G18 */
+	input_report_key(g15->input, KEY_MACRO18, data[8] & 0x40);
+
+	/* M1 - M3 */
+	for (i = 0; i < 3; i++) {
+		val = data[i + 6] & (1 << i);
+		input_report_key(g15->input, KEY_MACRO_PRESET1 + i, val);
+	}
+	/* MR */
+	input_report_key(g15->input, KEY_MACRO_RECORD_START, data[7] & 0x40);
+
+	lg_g15_handle_lcd_menu_keys(g15, data);
+
+	/* Backlight cycle button pressed? */
+	if (data[1] & 0x80)
+		schedule_work(&g15->work);
+
+	input_sync(g15->input);
+	return 0;
+}
+
+static int lg_g15_v2_event(struct lg_g15_data *g15, u8 *data)
+{
+	int i, val;
+
+	/* G1 - G6 */
+	for (i = 0; i < 6; i++) {
+		val = data[1] & (1 << i);
+		input_report_key(g15->input, KEY_MACRO1 + i, val);
+	}
+
+	/* M1 - M3 + MR */
+	input_report_key(g15->input, KEY_MACRO_PRESET1, data[1] & 0x40);
+	input_report_key(g15->input, KEY_MACRO_PRESET2, data[1] & 0x80);
+	input_report_key(g15->input, KEY_MACRO_PRESET3, data[2] & 0x20);
+	input_report_key(g15->input, KEY_MACRO_RECORD_START, data[2] & 0x40);
+
+	/* Round button to the left of the LCD */
+	input_report_key(g15->input, KEY_KBD_LCD_MENU1, data[2] & 0x80);
+	/* 4 buttons below the LCD */
+	for (i = 0; i < 4; i++) {
+		val = data[2] & (2 << i);
+		input_report_key(g15->input, KEY_KBD_LCD_MENU2 + i, val);
+	}
+
+	/* Backlight cycle button pressed? */
+	if (data[2] & 0x01)
+		schedule_work(&g15->work);
+
+	input_sync(g15->input);
+	return 0;
+}
+
+static int lg_g510_event(struct lg_g15_data *g15, u8 *data)
+{
+	bool game_mode_enabled;
+	int i, val;
+
+	/* G1 - G18 */
+	for (i = 0; i < 18; i++) {
+		val = data[i / 8 + 1] & (1 << (i % 8));
+		input_report_key(g15->input, KEY_MACRO1 + i, val);
+	}
+
+	/* Game mode on/off slider */
+	game_mode_enabled = data[3] & 0x04;
+	if (game_mode_enabled != g15->game_mode_enabled) {
+		if (game_mode_enabled)
+			hid_info(g15->hdev, "Game Mode enabled, Windows (super) key is disabled\n");
+		else
+			hid_info(g15->hdev, "Game Mode disabled\n");
+		g15->game_mode_enabled = game_mode_enabled;
+	}
+
+	/* M1 - M3 */
+	for (i = 0; i < 3; i++) {
+		val = data[3] & (0x10 << i);
+		input_report_key(g15->input, KEY_MACRO_PRESET1 + i, val);
+	}
+	/* MR */
+	input_report_key(g15->input, KEY_MACRO_RECORD_START, data[3] & 0x80);
+
+	/* LCD menu keys */
+	for (i = 0; i < 5; i++) {
+		val = data[4] & (1 << i);
+		input_report_key(g15->input, KEY_KBD_LCD_MENU1 + i, val);
+	}
+
+	/* Headphone Mute */
+	input_report_key(g15->input, KEY_MUTE, data[4] & 0x20);
+	/* Microphone Mute */
+	input_report_key(g15->input, KEY_F20, data[4] & 0x40);
+
+	input_sync(g15->input);
+	return 0;
+}
+
+static int lg_g510_leds_event(struct lg_g15_data *g15, u8 *data)
+{
+	bool backlight_disabled;
+
+	/*
+	 * The G510 ignores backlight updates when the backlight is turned off
+	 * through the light toggle button on the keyboard, to work around this
+	 * we queue a workitem to sync values when the backlight is turned on.
+	 */
+	backlight_disabled = data[1] & 0x04;
+	if (!backlight_disabled)
+		schedule_work(&g15->work);
+
+	return 0;
+}
+
+static int lg_g15_raw_event(struct hid_device *hdev, struct hid_report *report,
+			    u8 *data, int size)
+{
+	struct lg_g15_data *g15 = hid_get_drvdata(hdev);
+
+	if (!g15)
+		return 0;
+
+	switch (g15->model) {
+	case LG_G15:
+		if (data[0] == 0x02 && size == 9)
+			return lg_g15_event(g15, data);
+		break;
+	case LG_G15_V2:
+		if (data[0] == 0x02 && size == 5)
+			return lg_g15_v2_event(g15, data);
+		break;
+	case LG_Z10:
+		if (data[0] == 0x02 && size == 9) {
+			lg_g15_handle_lcd_menu_keys(g15, data);
+			input_sync(g15->input);
+		}
+		break;
+	case LG_G510:
+	case LG_G510_USB_AUDIO:
+		if (data[0] == 0x03 && size == 5)
+			return lg_g510_event(g15, data);
+		if (data[0] == 0x04 && size == 2)
+			return lg_g510_leds_event(g15, data);
+		break;
+	}
+
+	return 0;
+}
+
+static int lg_g15_input_open(struct input_dev *dev)
+{
+	struct hid_device *hdev = input_get_drvdata(dev);
+
+	return hid_hw_open(hdev);
+}
+
+static void lg_g15_input_close(struct input_dev *dev)
+{
+	struct hid_device *hdev = input_get_drvdata(dev);
+
+	hid_hw_close(hdev);
+}
+
+static int lg_g15_register_led(struct lg_g15_data *g15, int i, const char *name)
+{
+	g15->leds[i].led = i;
+	g15->leds[i].cdev.name = name;
+
+	switch (g15->model) {
+	case LG_G15:
+	case LG_G15_V2:
+		g15->leds[i].cdev.brightness_get = lg_g15_led_get;
+		fallthrough;
+	case LG_Z10:
+		g15->leds[i].cdev.brightness_set_blocking = lg_g15_led_set;
+		if (i < LG_G15_BRIGHTNESS_MAX) {
+			g15->leds[i].cdev.flags = LED_BRIGHT_HW_CHANGED;
+			g15->leds[i].cdev.max_brightness = 2;
+		} else {
+			g15->leds[i].cdev.max_brightness = 1;
+		}
+		break;
+	case LG_G510:
+	case LG_G510_USB_AUDIO:
+		switch (i) {
+		case LG_G15_LCD_BRIGHTNESS:
+			/*
+			 * The G510 does not have a separate LCD brightness,
+			 * but it does have a separate power-on (reset) value.
+			 */
+			g15->leds[i].cdev.name = "g15::power_on_backlight_val";
+			fallthrough;
+		case LG_G15_KBD_BRIGHTNESS:
+			g15->leds[i].cdev.brightness_set_blocking =
+				lg_g510_kbd_led_set;
+			g15->leds[i].cdev.brightness_get =
+				lg_g510_kbd_led_get;
+			g15->leds[i].cdev.max_brightness = 255;
+			g15->leds[i].cdev.groups = lg_g510_kbd_led_groups;
+			break;
+		default:
+			g15->leds[i].cdev.brightness_set_blocking =
+				lg_g510_mkey_led_set;
+			g15->leds[i].cdev.brightness_get =
+				lg_g510_mkey_led_get;
+			g15->leds[i].cdev.max_brightness = 1;
+		}
+		break;
+	}
+
+	return devm_led_classdev_register(&g15->hdev->dev, &g15->leds[i].cdev);
+}
+
+/* Common input device init code shared between keyboards and Z-10 speaker handling */
+static void lg_g15_init_input_dev(struct hid_device *hdev, struct input_dev *input,
+				  const char *name)
+{
+	int i;
+
+	input->name = name;
+	input->phys = hdev->phys;
+	input->uniq = hdev->uniq;
+	input->id.bustype = hdev->bus;
+	input->id.vendor  = hdev->vendor;
+	input->id.product = hdev->product;
+	input->id.version = hdev->version;
+	input->dev.parent = &hdev->dev;
+	input->open = lg_g15_input_open;
+	input->close = lg_g15_input_close;
+
+	/* Keys below the LCD, intended for controlling a menu on the LCD */
+	for (i = 0; i < 5; i++)
+		input_set_capability(input, EV_KEY, KEY_KBD_LCD_MENU1 + i);
+}
+
+static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	static const char * const led_names[] = {
+		"g15::kbd_backlight",
+		"g15::lcd_backlight",
+		"g15::macro_preset1",
+		"g15::macro_preset2",
+		"g15::macro_preset3",
+		"g15::macro_record",
+	};
+	u8 gkeys_settings_output_report = 0;
+	u8 gkeys_settings_feature_report = 0;
+	struct hid_report_enum *rep_enum;
+	unsigned int connect_mask = 0;
+	bool has_ff000000 = false;
+	struct lg_g15_data *g15;
+	struct input_dev *input;
+	struct hid_report *rep;
+	int ret, i, gkeys = 0;
+
+	hdev->quirks |= HID_QUIRK_INPUT_PER_APP;
+
+	ret = hid_parse(hdev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Some models have multiple interfaces, we want the interface with
+	 * the f000.0000 application input report.
+	 */
+	rep_enum = &hdev->report_enum[HID_INPUT_REPORT];
+	list_for_each_entry(rep, &rep_enum->report_list, list) {
+		if (rep->application == 0xff000000)
+			has_ff000000 = true;
+	}
+	if (!has_ff000000)
+		return hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	g15 = devm_kzalloc(&hdev->dev, sizeof(*g15), GFP_KERNEL);
+	if (!g15)
+		return -ENOMEM;
+
+	mutex_init(&g15->mutex);
+
+	input = devm_input_allocate_device(&hdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	g15->hdev = hdev;
+	g15->model = id->driver_data;
+	g15->input = input;
+	input_set_drvdata(input, hdev);
+	hid_set_drvdata(hdev, (void *)g15);
+
+	switch (g15->model) {
+	case LG_G15:
+		INIT_WORK(&g15->work, lg_g15_leds_changed_work);
+		/*
+		 * The G15 and G15 v2 use a separate usb-device (on a builtin
+		 * hub) which emulates a keyboard for the F1 - F12 emulation
+		 * on the G-keys, which we disable, rendering the emulated kbd
+		 * non-functional, so we do not let hid-input connect.
+		 */
+		connect_mask = HID_CONNECT_HIDRAW;
+		gkeys_settings_output_report = 0x02;
+		gkeys = 18;
+		break;
+	case LG_G15_V2:
+		INIT_WORK(&g15->work, lg_g15_leds_changed_work);
+		connect_mask = HID_CONNECT_HIDRAW;
+		gkeys_settings_output_report = 0x02;
+		gkeys = 6;
+		break;
+	case LG_G510:
+	case LG_G510_USB_AUDIO:
+		INIT_WORK(&g15->work, lg_g510_leds_sync_work);
+		connect_mask = HID_CONNECT_HIDINPUT | HID_CONNECT_HIDRAW;
+		gkeys_settings_feature_report = 0x01;
+		gkeys = 18;
+		break;
+	case LG_Z10:
+		connect_mask = HID_CONNECT_HIDRAW;
+		break;
+	}
+
+	ret = hid_hw_start(hdev, connect_mask);
+	if (ret)
+		return ret;
+
+	/* Tell the keyboard to stop sending F1-F12 + 1-6 for G1 - G18 */
+	if (gkeys_settings_output_report) {
+		g15->transfer_buf[0] = gkeys_settings_output_report;
+		memset(g15->transfer_buf + 1, 0, gkeys);
+		/*
+		 * The kbd ignores our output report if we do not queue
+		 * an URB on the USB input endpoint first...
+		 */
+		ret = hid_hw_open(hdev);
+		if (ret)
+			goto error_hw_stop;
+		ret = hid_hw_output_report(hdev, g15->transfer_buf, gkeys + 1);
+		hid_hw_close(hdev);
+	}
+
+	if (gkeys_settings_feature_report) {
+		g15->transfer_buf[0] = gkeys_settings_feature_report;
+		memset(g15->transfer_buf + 1, 0, gkeys);
+		ret = hid_hw_raw_request(g15->hdev,
+				gkeys_settings_feature_report,
+				g15->transfer_buf, gkeys + 1,
+				HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	}
+
+	if (ret < 0) {
+		hid_err(hdev, "Error %d disabling keyboard emulation for the G-keys, falling back to generic hid-input driver\n",
+			ret);
+		hid_set_drvdata(hdev, NULL);
+		return 0;
+	}
+
+	/* Get initial brightness levels */
+	ret = lg_g15_get_initial_led_brightness(g15);
+	if (ret)
+		goto error_hw_stop;
+
+	if (g15->model == LG_Z10) {
+		lg_g15_init_input_dev(hdev, g15->input, "Logitech Z-10 LCD Menu Keys");
+		ret = input_register_device(g15->input);
+		if (ret)
+			goto error_hw_stop;
+
+		ret = lg_g15_register_led(g15, 1, "z-10::lcd_backlight");
+		if (ret)
+			goto error_hw_stop;
+
+		return 0; /* All done */
+	}
+
+	/* Setup and register input device */
+	lg_g15_init_input_dev(hdev, input, "Logitech Gaming Keyboard Gaming Keys");
+
+	/* G-keys */
+	for (i = 0; i < gkeys; i++)
+		input_set_capability(input, EV_KEY, KEY_MACRO1 + i);
+
+	/* M1 - M3 and MR keys */
+	for (i = 0; i < 3; i++)
+		input_set_capability(input, EV_KEY, KEY_MACRO_PRESET1 + i);
+	input_set_capability(input, EV_KEY, KEY_MACRO_RECORD_START);
+
+	/*
+	 * On the G510 only report headphone and mic mute keys when *not* using
+	 * the builtin USB audio device. When the builtin audio is used these
+	 * keys directly toggle mute (and the LEDs) on/off.
+	 */
+	if (g15->model == LG_G510) {
+		input_set_capability(input, EV_KEY, KEY_MUTE);
+		/* Userspace expects F20 for micmute */
+		input_set_capability(input, EV_KEY, KEY_F20);
+	}
+
+	ret = input_register_device(input);
+	if (ret)
+		goto error_hw_stop;
+
+	/* Register LED devices */
+	for (i = 0; i < LG_G15_LED_MAX; i++) {
+		ret = lg_g15_register_led(g15, i, led_names[i]);
+		if (ret)
+			goto error_hw_stop;
+	}
+
+	return 0;
+
+error_hw_stop:
+	hid_hw_stop(hdev);
+	return ret;
+}
+
+static const struct hid_device_id lg_g15_devices[] = {
+	/* The G11 is a G15 without the LCD, treat it as a G15 */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_G11),
+		.driver_data = LG_G15 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+			 USB_DEVICE_ID_LOGITECH_G15_LCD),
+		.driver_data = LG_G15 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+			 USB_DEVICE_ID_LOGITECH_G15_V2_LCD),
+		.driver_data = LG_G15_V2 },
+	/* G510 without a headset plugged in */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+			 USB_DEVICE_ID_LOGITECH_G510),
+		.driver_data = LG_G510 },
+	/* G510 with headset plugged in / with extra USB audio interface */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+			 USB_DEVICE_ID_LOGITECH_G510_USB_AUDIO),
+		.driver_data = LG_G510_USB_AUDIO },
+	/* Z-10 speakers */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+			 USB_DEVICE_ID_LOGITECH_Z_10_SPK),
+		.driver_data = LG_Z10 },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, lg_g15_devices);
+
+static struct hid_driver lg_g15_driver = {
+	.name			= "lg-g15",
+	.id_table		= lg_g15_devices,
+	.raw_event		= lg_g15_raw_event,
+	.probe			= lg_g15_probe,
+};
+module_hid_driver(lg_g15_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");