Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 945 insertions, 0 deletions

diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
new file mode 100644
index 000000000..fb3f72580
--- /dev/null
+++ b/drivers/hid/hid-lg.c
@@ -0,0 +1,945 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  HID driver for some logitech "special" devices
+ *
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2008 Jiri Slaby
+ *  Copyright (c) 2010 Hendrik Iben
+ */
+
+/*
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+
+#include "usbhid/usbhid.h"
+#include "hid-ids.h"
+#include "hid-lg.h"
+#include "hid-lg4ff.h"
+
+#define LG_RDESC		0x001
+#define LG_BAD_RELATIVE_KEYS	0x002
+#define LG_DUPLICATE_USAGES	0x004
+#define LG_EXPANDED_KEYMAP	0x010
+#define LG_IGNORE_DOUBLED_WHEEL	0x020
+#define LG_WIRELESS		0x040
+#define LG_INVERT_HWHEEL	0x080
+#define LG_NOGET		0x100
+#define LG_FF			0x200
+#define LG_FF2			0x400
+#define LG_RDESC_REL_ABS	0x800
+#define LG_FF3			0x1000
+#define LG_FF4			0x2000
+
+/* Size of the original descriptors of the Driving Force (and Pro) wheels */
+#define DF_RDESC_ORIG_SIZE	130
+#define DFP_RDESC_ORIG_SIZE	97
+#define FV_RDESC_ORIG_SIZE	130
+#define MOMO_RDESC_ORIG_SIZE	87
+#define MOMO2_RDESC_ORIG_SIZE	87
+#define FFG_RDESC_ORIG_SIZE	85
+#define FG_RDESC_ORIG_SIZE	82
+
+/* Fixed report descriptors for Logitech Driving Force (and Pro)
+ * wheel controllers
+ *
+ * The original descriptors hide the separate throttle and brake axes in
+ * a custom vendor usage page, providing only a combined value as
+ * GenericDesktop.Y.
+ * These descriptors remove the combined Y axis and instead report
+ * separate throttle (Y) and brake (RZ).
+ */
+static __u8 df_rdesc_fixed[] = {
+0x05, 0x01,         /*  Usage Page (Desktop),                   */
+0x09, 0x04,         /*  Usage (Joystick),                       */
+0xA1, 0x01,         /*  Collection (Application),               */
+0xA1, 0x02,         /*      Collection (Logical),               */
+0x95, 0x01,         /*          Report Count (1),               */
+0x75, 0x0A,         /*          Report Size (10),               */
+0x14,               /*          Logical Minimum (0),            */
+0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),         */
+0x34,               /*          Physical Minimum (0),           */
+0x46, 0xFF, 0x03,   /*          Physical Maximum (1023),        */
+0x09, 0x30,         /*          Usage (X),                      */
+0x81, 0x02,         /*          Input (Variable),               */
+0x95, 0x0C,         /*          Report Count (12),              */
+0x75, 0x01,         /*          Report Size (1),                */
+0x25, 0x01,         /*          Logical Maximum (1),            */
+0x45, 0x01,         /*          Physical Maximum (1),           */
+0x05, 0x09,         /*          Usage (Buttons),                */
+0x19, 0x01,         /*          Usage Minimum (1),              */
+0x29, 0x0c,         /*          Usage Maximum (12),             */
+0x81, 0x02,         /*          Input (Variable),               */
+0x95, 0x02,         /*          Report Count (2),               */
+0x06, 0x00, 0xFF,   /*          Usage Page (Vendor: 65280),     */
+0x09, 0x01,         /*          Usage (?: 1),                   */
+0x81, 0x02,         /*          Input (Variable),               */
+0x05, 0x01,         /*          Usage Page (Desktop),           */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),          */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),         */
+0x95, 0x01,         /*          Report Count (1),               */
+0x75, 0x08,         /*          Report Size (8),                */
+0x81, 0x02,         /*          Input (Variable),               */
+0x25, 0x07,         /*          Logical Maximum (7),            */
+0x46, 0x3B, 0x01,   /*          Physical Maximum (315),         */
+0x75, 0x04,         /*          Report Size (4),                */
+0x65, 0x14,         /*          Unit (Degrees),                 */
+0x09, 0x39,         /*          Usage (Hat Switch),             */
+0x81, 0x42,         /*          Input (Variable, Null State),   */
+0x75, 0x01,         /*          Report Size (1),                */
+0x95, 0x04,         /*          Report Count (4),               */
+0x65, 0x00,         /*          Unit (none),                    */
+0x06, 0x00, 0xFF,   /*          Usage Page (Vendor: 65280),     */
+0x09, 0x01,         /*          Usage (?: 1),                   */
+0x25, 0x01,         /*          Logical Maximum (1),            */
+0x45, 0x01,         /*          Physical Maximum (1),           */
+0x81, 0x02,         /*          Input (Variable),               */
+0x05, 0x01,         /*          Usage Page (Desktop),           */
+0x95, 0x01,         /*          Report Count (1),               */
+0x75, 0x08,         /*          Report Size (8),                */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),          */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),         */
+0x09, 0x31,         /*          Usage (Y),                      */
+0x81, 0x02,         /*          Input (Variable),               */
+0x09, 0x35,         /*          Usage (Rz),                     */
+0x81, 0x02,         /*          Input (Variable),               */
+0xC0,               /*      End Collection,                     */
+0xA1, 0x02,         /*      Collection (Logical),               */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),          */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),         */
+0x95, 0x07,         /*          Report Count (7),               */
+0x75, 0x08,         /*          Report Size (8),                */
+0x09, 0x03,         /*          Usage (?: 3),                   */
+0x91, 0x02,         /*          Output (Variable),              */
+0xC0,               /*      End Collection,                     */
+0xC0                /*  End Collection                          */
+};
+
+static __u8 dfp_rdesc_fixed[] = {
+0x05, 0x01,         /*  Usage Page (Desktop),                   */
+0x09, 0x04,         /*  Usage (Joystick),                       */
+0xA1, 0x01,         /*  Collection (Application),               */
+0xA1, 0x02,         /*      Collection (Logical),               */
+0x95, 0x01,         /*          Report Count (1),               */
+0x75, 0x0E,         /*          Report Size (14),               */
+0x14,               /*          Logical Minimum (0),            */
+0x26, 0xFF, 0x3F,   /*          Logical Maximum (16383),        */
+0x34,               /*          Physical Minimum (0),           */
+0x46, 0xFF, 0x3F,   /*          Physical Maximum (16383),       */
+0x09, 0x30,         /*          Usage (X),                      */
+0x81, 0x02,         /*          Input (Variable),               */
+0x95, 0x0E,         /*          Report Count (14),              */
+0x75, 0x01,         /*          Report Size (1),                */
+0x25, 0x01,         /*          Logical Maximum (1),            */
+0x45, 0x01,         /*          Physical Maximum (1),           */
+0x05, 0x09,         /*          Usage Page (Button),            */
+0x19, 0x01,         /*          Usage Minimum (01h),            */
+0x29, 0x0E,         /*          Usage Maximum (0Eh),            */
+0x81, 0x02,         /*          Input (Variable),               */
+0x05, 0x01,         /*          Usage Page (Desktop),           */
+0x95, 0x01,         /*          Report Count (1),               */
+0x75, 0x04,         /*          Report Size (4),                */
+0x25, 0x07,         /*          Logical Maximum (7),            */
+0x46, 0x3B, 0x01,   /*          Physical Maximum (315),         */
+0x65, 0x14,         /*          Unit (Degrees),                 */
+0x09, 0x39,         /*          Usage (Hat Switch),             */
+0x81, 0x42,         /*          Input (Variable, Nullstate),    */
+0x65, 0x00,         /*          Unit,                           */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),          */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),         */
+0x75, 0x08,         /*          Report Size (8),                */
+0x81, 0x01,         /*          Input (Constant),               */
+0x09, 0x31,         /*          Usage (Y),                      */
+0x81, 0x02,         /*          Input (Variable),               */
+0x09, 0x35,         /*          Usage (Rz),                     */
+0x81, 0x02,         /*          Input (Variable),               */
+0x81, 0x01,         /*          Input (Constant),               */
+0xC0,               /*      End Collection,                     */
+0xA1, 0x02,         /*      Collection (Logical),               */
+0x09, 0x02,         /*          Usage (02h),                    */
+0x95, 0x07,         /*          Report Count (7),               */
+0x91, 0x02,         /*          Output (Variable),              */
+0xC0,               /*      End Collection,                     */
+0xC0                /*  End Collection                          */
+};
+
+static __u8 fv_rdesc_fixed[] = {
+0x05, 0x01,         /*  Usage Page (Desktop),                   */
+0x09, 0x04,         /*  Usage (Joystick),                       */
+0xA1, 0x01,         /*  Collection (Application),               */
+0xA1, 0x02,         /*      Collection (Logical),               */
+0x95, 0x01,         /*          Report Count (1),               */
+0x75, 0x0A,         /*          Report Size (10),               */
+0x15, 0x00,         /*          Logical Minimum (0),            */
+0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),         */
+0x35, 0x00,         /*          Physical Minimum (0),           */
+0x46, 0xFF, 0x03,   /*          Physical Maximum (1023),        */
+0x09, 0x30,         /*          Usage (X),                      */
+0x81, 0x02,         /*          Input (Variable),               */
+0x95, 0x0C,         /*          Report Count (12),              */
+0x75, 0x01,         /*          Report Size (1),                */
+0x25, 0x01,         /*          Logical Maximum (1),            */
+0x45, 0x01,         /*          Physical Maximum (1),           */
+0x05, 0x09,         /*          Usage Page (Button),            */
+0x19, 0x01,         /*          Usage Minimum (01h),            */
+0x29, 0x0C,         /*          Usage Maximum (0Ch),            */
+0x81, 0x02,         /*          Input (Variable),               */
+0x95, 0x02,         /*          Report Count (2),               */
+0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),             */
+0x09, 0x01,         /*          Usage (01h),                    */
+0x81, 0x02,         /*          Input (Variable),               */
+0x09, 0x02,         /*          Usage (02h),                    */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),          */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),         */
+0x95, 0x01,         /*          Report Count (1),               */
+0x75, 0x08,         /*          Report Size (8),                */
+0x81, 0x02,         /*          Input (Variable),               */
+0x05, 0x01,         /*          Usage Page (Desktop),           */
+0x25, 0x07,         /*          Logical Maximum (7),            */
+0x46, 0x3B, 0x01,   /*          Physical Maximum (315),         */
+0x75, 0x04,         /*          Report Size (4),                */
+0x65, 0x14,         /*          Unit (Degrees),                 */
+0x09, 0x39,         /*          Usage (Hat Switch),             */
+0x81, 0x42,         /*          Input (Variable, Null State),   */
+0x75, 0x01,         /*          Report Size (1),                */
+0x95, 0x04,         /*          Report Count (4),               */
+0x65, 0x00,         /*          Unit,                           */
+0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),             */
+0x09, 0x01,         /*          Usage (01h),                    */
+0x25, 0x01,         /*          Logical Maximum (1),            */
+0x45, 0x01,         /*          Physical Maximum (1),           */
+0x81, 0x02,         /*          Input (Variable),               */
+0x05, 0x01,         /*          Usage Page (Desktop),           */
+0x95, 0x01,         /*          Report Count (1),               */
+0x75, 0x08,         /*          Report Size (8),                */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),          */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),         */
+0x09, 0x31,         /*          Usage (Y),                      */
+0x81, 0x02,         /*          Input (Variable),               */
+0x09, 0x32,         /*          Usage (Z),                      */
+0x81, 0x02,         /*          Input (Variable),               */
+0xC0,               /*      End Collection,                     */
+0xA1, 0x02,         /*      Collection (Logical),               */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),          */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),         */
+0x95, 0x07,         /*          Report Count (7),               */
+0x75, 0x08,         /*          Report Size (8),                */
+0x09, 0x03,         /*          Usage (03h),                    */
+0x91, 0x02,         /*          Output (Variable),              */
+0xC0,               /*      End Collection,                     */
+0xC0                /*  End Collection                          */
+};
+
+static __u8 momo_rdesc_fixed[] = {
+0x05, 0x01,         /*  Usage Page (Desktop),               */
+0x09, 0x04,         /*  Usage (Joystick),                   */
+0xA1, 0x01,         /*  Collection (Application),           */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x95, 0x01,         /*          Report Count (1),           */
+0x75, 0x0A,         /*          Report Size (10),           */
+0x15, 0x00,         /*          Logical Minimum (0),        */
+0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),     */
+0x35, 0x00,         /*          Physical Minimum (0),       */
+0x46, 0xFF, 0x03,   /*          Physical Maximum (1023),    */
+0x09, 0x30,         /*          Usage (X),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x95, 0x08,         /*          Report Count (8),           */
+0x75, 0x01,         /*          Report Size (1),            */
+0x25, 0x01,         /*          Logical Maximum (1),        */
+0x45, 0x01,         /*          Physical Maximum (1),       */
+0x05, 0x09,         /*          Usage Page (Button),        */
+0x19, 0x01,         /*          Usage Minimum (01h),        */
+0x29, 0x08,         /*          Usage Maximum (08h),        */
+0x81, 0x02,         /*          Input (Variable),           */
+0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
+0x75, 0x0E,         /*          Report Size (14),           */
+0x95, 0x01,         /*          Report Count (1),           */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),      */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),     */
+0x09, 0x00,         /*          Usage (00h),                */
+0x81, 0x02,         /*          Input (Variable),           */
+0x05, 0x01,         /*          Usage Page (Desktop),       */
+0x75, 0x08,         /*          Report Size (8),            */
+0x09, 0x31,         /*          Usage (Y),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x09, 0x32,         /*          Usage (Z),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
+0x09, 0x01,         /*          Usage (01h),                */
+0x81, 0x02,         /*          Input (Variable),           */
+0xC0,               /*      End Collection,                 */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x09, 0x02,         /*          Usage (02h),                */
+0x95, 0x07,         /*          Report Count (7),           */
+0x91, 0x02,         /*          Output (Variable),          */
+0xC0,               /*      End Collection,                 */
+0xC0                /*  End Collection                      */
+};
+
+static __u8 momo2_rdesc_fixed[] = {
+0x05, 0x01,         /*  Usage Page (Desktop),               */
+0x09, 0x04,         /*  Usage (Joystick),                   */
+0xA1, 0x01,         /*  Collection (Application),           */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x95, 0x01,         /*          Report Count (1),           */
+0x75, 0x0A,         /*          Report Size (10),           */
+0x15, 0x00,         /*          Logical Minimum (0),        */
+0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),     */
+0x35, 0x00,         /*          Physical Minimum (0),       */
+0x46, 0xFF, 0x03,   /*          Physical Maximum (1023),    */
+0x09, 0x30,         /*          Usage (X),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x95, 0x0A,         /*          Report Count (10),          */
+0x75, 0x01,         /*          Report Size (1),            */
+0x25, 0x01,         /*          Logical Maximum (1),        */
+0x45, 0x01,         /*          Physical Maximum (1),       */
+0x05, 0x09,         /*          Usage Page (Button),        */
+0x19, 0x01,         /*          Usage Minimum (01h),        */
+0x29, 0x0A,         /*          Usage Maximum (0Ah),        */
+0x81, 0x02,         /*          Input (Variable),           */
+0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
+0x09, 0x00,         /*          Usage (00h),                */
+0x95, 0x04,         /*          Report Count (4),           */
+0x81, 0x02,         /*          Input (Variable),           */
+0x95, 0x01,         /*          Report Count (1),           */
+0x75, 0x08,         /*          Report Size (8),            */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),      */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),     */
+0x09, 0x01,         /*          Usage (01h),                */
+0x81, 0x02,         /*          Input (Variable),           */
+0x05, 0x01,         /*          Usage Page (Desktop),       */
+0x09, 0x31,         /*          Usage (Y),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x09, 0x32,         /*          Usage (Z),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
+0x09, 0x00,         /*          Usage (00h),                */
+0x81, 0x02,         /*          Input (Variable),           */
+0xC0,               /*      End Collection,                 */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x09, 0x02,         /*          Usage (02h),                */
+0x95, 0x07,         /*          Report Count (7),           */
+0x91, 0x02,         /*          Output (Variable),          */
+0xC0,               /*      End Collection,                 */
+0xC0                /*  End Collection                      */
+};
+
+static __u8 ffg_rdesc_fixed[] = {
+0x05, 0x01,         /*  Usage Page (Desktop),               */
+0x09, 0x04,         /*  Usage (Joystik),                    */
+0xA1, 0x01,         /*  Collection (Application),           */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x95, 0x01,         /*          Report Count (1),           */
+0x75, 0x0A,         /*          Report Size (10),           */
+0x15, 0x00,         /*          Logical Minimum (0),        */
+0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),     */
+0x35, 0x00,         /*          Physical Minimum (0),       */
+0x46, 0xFF, 0x03,   /*          Physical Maximum (1023),    */
+0x09, 0x30,         /*          Usage (X),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x95, 0x06,         /*          Report Count (6),           */
+0x75, 0x01,         /*          Report Size (1),            */
+0x25, 0x01,         /*          Logical Maximum (1),        */
+0x45, 0x01,         /*          Physical Maximum (1),       */
+0x05, 0x09,         /*          Usage Page (Button),        */
+0x19, 0x01,         /*          Usage Minimum (01h),        */
+0x29, 0x06,         /*          Usage Maximum (06h),        */
+0x81, 0x02,         /*          Input (Variable),           */
+0x95, 0x01,         /*          Report Count (1),           */
+0x75, 0x08,         /*          Report Size (8),            */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),      */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),     */
+0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
+0x09, 0x01,         /*          Usage (01h),                */
+0x81, 0x02,         /*          Input (Variable),           */
+0x05, 0x01,         /*          Usage Page (Desktop),       */
+0x81, 0x01,         /*          Input (Constant),           */
+0x09, 0x31,         /*          Usage (Y),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x09, 0x32,         /*          Usage (Z),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
+0x09, 0x01,         /*          Usage (01h),                */
+0x81, 0x02,         /*          Input (Variable),           */
+0xC0,               /*      End Collection,                 */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x09, 0x02,         /*          Usage (02h),                */
+0x95, 0x07,         /*          Report Count (7),           */
+0x91, 0x02,         /*          Output (Variable),          */
+0xC0,               /*      End Collection,                 */
+0xC0                /*  End Collection                      */
+};
+
+static __u8 fg_rdesc_fixed[] = {
+0x05, 0x01,         /*  Usage Page (Desktop),               */
+0x09, 0x04,         /*  Usage (Joystik),                    */
+0xA1, 0x01,         /*  Collection (Application),           */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x15, 0x00,         /*          Logical Minimum (0),        */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),      */
+0x35, 0x00,         /*          Physical Minimum (0),       */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),     */
+0x75, 0x08,         /*          Report Size (8),            */
+0x95, 0x01,         /*          Report Count (1),           */
+0x09, 0x30,         /*          Usage (X),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0xA4,               /*  Push,                               */
+0x25, 0x01,         /*          Logical Maximum (1),        */
+0x45, 0x01,         /*          Physical Maximum (1),       */
+0x75, 0x01,         /*          Report Size (1),            */
+0x95, 0x02,         /*          Report Count (2),           */
+0x81, 0x01,         /*          Input (Constant),           */
+0x95, 0x06,         /*          Report Count (6),           */
+0x05, 0x09,         /*          Usage Page (Button),        */
+0x19, 0x01,         /*          Usage Minimum (01h),        */
+0x29, 0x06,         /*          Usage Maximum (06h),        */
+0x81, 0x02,         /*          Input (Variable),           */
+0x05, 0x01,         /*          Usage Page (Desktop),       */
+0xB4,               /*  Pop,                                */
+0x81, 0x02,         /*          Input (Constant),           */
+0x09, 0x31,         /*          Usage (Y),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0x09, 0x32,         /*          Usage (Z),                  */
+0x81, 0x02,         /*          Input (Variable),           */
+0xC0,               /*      End Collection,                 */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x26, 0xFF, 0x00,   /*          Logical Maximum (255),      */
+0x46, 0xFF, 0x00,   /*          Physical Maximum (255),     */
+0x75, 0x08,         /*          Report Size (8),            */
+0x95, 0x04,         /*          Report Count (4),           */
+0x09, 0x02,         /*          Usage (02h),                */
+0xB1, 0x02,         /*          Feature (Variable),         */
+0xC0,               /*      End Collection,                 */
+0xC0                /*  End Collection,                     */
+};
+
+/*
+ * Certain Logitech keyboards send in report #3 keys which are far
+ * above the logical maximum described in descriptor. This extends
+ * the original value of 0x28c of logical maximum to 0x104d
+ */
+static __u8 *lg_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	struct lg_drv_data *drv_data = hid_get_drvdata(hdev);
+
+	if ((drv_data->quirks & LG_RDESC) && *rsize >= 91 && rdesc[83] == 0x26 &&
+			rdesc[84] == 0x8c && rdesc[85] == 0x02) {
+		hid_info(hdev,
+			 "fixing up Logitech keyboard report descriptor\n");
+		rdesc[84] = rdesc[89] = 0x4d;
+		rdesc[85] = rdesc[90] = 0x10;
+	}
+	if ((drv_data->quirks & LG_RDESC_REL_ABS) && *rsize >= 51 &&
+			rdesc[32] == 0x81 && rdesc[33] == 0x06 &&
+			rdesc[49] == 0x81 && rdesc[50] == 0x06) {
+		hid_info(hdev,
+			 "fixing up rel/abs in Logitech report descriptor\n");
+		rdesc[33] = rdesc[50] = 0x02;
+	}
+
+	switch (hdev->product) {
+
+	case USB_DEVICE_ID_LOGITECH_WINGMAN_FG:
+		if (*rsize == FG_RDESC_ORIG_SIZE) {
+			hid_info(hdev,
+				"fixing up Logitech Wingman Formula GP report descriptor\n");
+			rdesc = fg_rdesc_fixed;
+			*rsize = sizeof(fg_rdesc_fixed);
+		} else {
+			hid_info(hdev,
+				"rdesc size test failed for formula gp\n");
+		}
+		break;
+
+
+	case USB_DEVICE_ID_LOGITECH_WINGMAN_FFG:
+		if (*rsize == FFG_RDESC_ORIG_SIZE) {
+			hid_info(hdev,
+				"fixing up Logitech Wingman Formula Force GP report descriptor\n");
+			rdesc = ffg_rdesc_fixed;
+			*rsize = sizeof(ffg_rdesc_fixed);
+		}
+		break;
+
+	/* Several wheels report as this id when operating in emulation mode. */
+	case USB_DEVICE_ID_LOGITECH_WHEEL:
+		if (*rsize == DF_RDESC_ORIG_SIZE) {
+			hid_info(hdev,
+				"fixing up Logitech Driving Force report descriptor\n");
+			rdesc = df_rdesc_fixed;
+			*rsize = sizeof(df_rdesc_fixed);
+		}
+		break;
+
+	case USB_DEVICE_ID_LOGITECH_MOMO_WHEEL:
+		if (*rsize == MOMO_RDESC_ORIG_SIZE) {
+			hid_info(hdev,
+				"fixing up Logitech Momo Force (Red) report descriptor\n");
+			rdesc = momo_rdesc_fixed;
+			*rsize = sizeof(momo_rdesc_fixed);
+		}
+		break;
+
+	case USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2:
+		if (*rsize == MOMO2_RDESC_ORIG_SIZE) {
+			hid_info(hdev,
+				"fixing up Logitech Momo Racing Force (Black) report descriptor\n");
+			rdesc = momo2_rdesc_fixed;
+			*rsize = sizeof(momo2_rdesc_fixed);
+		}
+		break;
+
+	case USB_DEVICE_ID_LOGITECH_VIBRATION_WHEEL:
+		if (*rsize == FV_RDESC_ORIG_SIZE) {
+			hid_info(hdev,
+				"fixing up Logitech Formula Vibration report descriptor\n");
+			rdesc = fv_rdesc_fixed;
+			*rsize = sizeof(fv_rdesc_fixed);
+		}
+		break;
+
+	case USB_DEVICE_ID_LOGITECH_DFP_WHEEL:
+		if (*rsize == DFP_RDESC_ORIG_SIZE) {
+			hid_info(hdev,
+				"fixing up Logitech Driving Force Pro report descriptor\n");
+			rdesc = dfp_rdesc_fixed;
+			*rsize = sizeof(dfp_rdesc_fixed);
+		}
+		break;
+
+	case USB_DEVICE_ID_LOGITECH_WII_WHEEL:
+		if (*rsize >= 101 && rdesc[41] == 0x95 && rdesc[42] == 0x0B &&
+				rdesc[47] == 0x05 && rdesc[48] == 0x09) {
+			hid_info(hdev, "fixing up Logitech Speed Force Wireless report descriptor\n");
+			rdesc[41] = 0x05;
+			rdesc[42] = 0x09;
+			rdesc[47] = 0x95;
+			rdesc[48] = 0x0B;
+		}
+		break;
+	}
+
+	return rdesc;
+}
+
+#define lg_map_key_clear(c)	hid_map_usage_clear(hi, usage, bit, max, \
+		EV_KEY, (c))
+
+static int lg_ultrax_remote_mapping(struct hid_input *hi,
+		struct hid_usage *usage, unsigned long **bit, int *max)
+{
+	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_LOGIVENDOR)
+		return 0;
+
+	set_bit(EV_REP, hi->input->evbit);
+	switch (usage->hid & HID_USAGE) {
+	/* Reported on Logitech Ultra X Media Remote */
+	case 0x004: lg_map_key_clear(KEY_AGAIN);	break;
+	case 0x00d: lg_map_key_clear(KEY_HOME);		break;
+	case 0x024: lg_map_key_clear(KEY_SHUFFLE);	break;
+	case 0x025: lg_map_key_clear(KEY_TV);		break;
+	case 0x026: lg_map_key_clear(KEY_MENU);		break;
+	case 0x031: lg_map_key_clear(KEY_AUDIO);	break;
+	case 0x032: lg_map_key_clear(KEY_TEXT);		break;
+	case 0x033: lg_map_key_clear(KEY_LAST);		break;
+	case 0x047: lg_map_key_clear(KEY_MP3);		break;
+	case 0x048: lg_map_key_clear(KEY_DVD);		break;
+	case 0x049: lg_map_key_clear(KEY_MEDIA);	break;
+	case 0x04a: lg_map_key_clear(KEY_VIDEO);	break;
+	case 0x04b: lg_map_key_clear(KEY_ANGLE);	break;
+	case 0x04c: lg_map_key_clear(KEY_LANGUAGE);	break;
+	case 0x04d: lg_map_key_clear(KEY_SUBTITLE);	break;
+	case 0x051: lg_map_key_clear(KEY_RED);		break;
+	case 0x052: lg_map_key_clear(KEY_CLOSE);	break;
+
+	default:
+		return 0;
+	}
+	return 1;
+}
+
+static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER)
+		return 0;
+
+	switch (usage->hid & HID_USAGE) {
+	case 0x1001: lg_map_key_clear(KEY_MESSENGER);		break;
+	case 0x1003: lg_map_key_clear(KEY_SOUND);		break;
+	case 0x1004: lg_map_key_clear(KEY_VIDEO);		break;
+	case 0x1005: lg_map_key_clear(KEY_AUDIO);		break;
+	case 0x100a: lg_map_key_clear(KEY_DOCUMENTS);		break;
+	/* The following two entries are Playlist 1 and 2 on the MX3200 */
+	case 0x100f: lg_map_key_clear(KEY_FN_1);		break;
+	case 0x1010: lg_map_key_clear(KEY_FN_2);		break;
+	case 0x1011: lg_map_key_clear(KEY_PREVIOUSSONG);	break;
+	case 0x1012: lg_map_key_clear(KEY_NEXTSONG);		break;
+	case 0x1013: lg_map_key_clear(KEY_CAMERA);		break;
+	case 0x1014: lg_map_key_clear(KEY_MESSENGER);		break;
+	case 0x1015: lg_map_key_clear(KEY_RECORD);		break;
+	case 0x1016: lg_map_key_clear(KEY_PLAYER);		break;
+	case 0x1017: lg_map_key_clear(KEY_EJECTCD);		break;
+	case 0x1018: lg_map_key_clear(KEY_MEDIA);		break;
+	case 0x1019: lg_map_key_clear(KEY_PROG1);		break;
+	case 0x101a: lg_map_key_clear(KEY_PROG2);		break;
+	case 0x101b: lg_map_key_clear(KEY_PROG3);		break;
+	case 0x101c: lg_map_key_clear(KEY_CYCLEWINDOWS);	break;
+	case 0x101f: lg_map_key_clear(KEY_ZOOMIN);		break;
+	case 0x1020: lg_map_key_clear(KEY_ZOOMOUT);		break;
+	case 0x1021: lg_map_key_clear(KEY_ZOOMRESET);		break;
+	case 0x1023: lg_map_key_clear(KEY_CLOSE);		break;
+	case 0x1027: lg_map_key_clear(KEY_MENU);		break;
+	/* this one is marked as 'Rotate' */
+	case 0x1028: lg_map_key_clear(KEY_ANGLE);		break;
+	case 0x1029: lg_map_key_clear(KEY_SHUFFLE);		break;
+	case 0x102a: lg_map_key_clear(KEY_BACK);		break;
+	case 0x102b: lg_map_key_clear(KEY_CYCLEWINDOWS);	break;
+	case 0x102d: lg_map_key_clear(KEY_WWW);			break;
+	/* The following two are 'Start/answer call' and 'End/reject call'
+	   on the MX3200 */
+	case 0x1031: lg_map_key_clear(KEY_OK);			break;
+	case 0x1032: lg_map_key_clear(KEY_CANCEL);		break;
+	case 0x1041: lg_map_key_clear(KEY_BATTERY);		break;
+	case 0x1042: lg_map_key_clear(KEY_WORDPROCESSOR);	break;
+	case 0x1043: lg_map_key_clear(KEY_SPREADSHEET);		break;
+	case 0x1044: lg_map_key_clear(KEY_PRESENTATION);	break;
+	case 0x1045: lg_map_key_clear(KEY_UNDO);		break;
+	case 0x1046: lg_map_key_clear(KEY_REDO);		break;
+	case 0x1047: lg_map_key_clear(KEY_PRINT);		break;
+	case 0x1048: lg_map_key_clear(KEY_SAVE);		break;
+	case 0x1049: lg_map_key_clear(KEY_PROG1);		break;
+	case 0x104a: lg_map_key_clear(KEY_PROG2);		break;
+	case 0x104b: lg_map_key_clear(KEY_PROG3);		break;
+	case 0x104c: lg_map_key_clear(KEY_PROG4);		break;
+
+	default:
+		return 0;
+	}
+	return 1;
+}
+
+static int lg_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	/* extended mapping for certain Logitech hardware (Logitech cordless
+	   desktop LX500) */
+	static const u8 e_keymap[] = {
+		  0,216,  0,213,175,156,  0,  0,  0,  0,
+		144,  0,  0,  0,  0,  0,  0,  0,  0,212,
+		174,167,152,161,112,  0,  0,  0,154,  0,
+		  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+		  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+		  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+		  0,  0,  0,  0,  0,183,184,185,186,187,
+		188,189,190,191,192,193,194,  0,  0,  0
+	};
+	struct lg_drv_data *drv_data = hid_get_drvdata(hdev);
+	unsigned int hid = usage->hid;
+
+	if (hdev->product == USB_DEVICE_ID_LOGITECH_RECEIVER &&
+			lg_ultrax_remote_mapping(hi, usage, bit, max))
+		return 1;
+
+	if ((drv_data->quirks & LG_WIRELESS) && lg_wireless_mapping(hi, usage, bit, max))
+		return 1;
+
+	if ((hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
+		return 0;
+
+	hid &= HID_USAGE;
+
+	/* Special handling for Logitech Cordless Desktop */
+	if (field->application == HID_GD_MOUSE) {
+		if ((drv_data->quirks & LG_IGNORE_DOUBLED_WHEEL) &&
+				(hid == 7 || hid == 8))
+			return -1;
+	} else {
+		if ((drv_data->quirks & LG_EXPANDED_KEYMAP) &&
+				hid < ARRAY_SIZE(e_keymap) &&
+				e_keymap[hid] != 0) {
+			hid_map_usage(hi, usage, bit, max, EV_KEY,
+					e_keymap[hid]);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int lg_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	struct lg_drv_data *drv_data = hid_get_drvdata(hdev);
+
+	if ((drv_data->quirks & LG_BAD_RELATIVE_KEYS) && usage->type == EV_KEY &&
+			(field->flags & HID_MAIN_ITEM_RELATIVE))
+		field->flags &= ~HID_MAIN_ITEM_RELATIVE;
+
+	if ((drv_data->quirks & LG_DUPLICATE_USAGES) && (usage->type == EV_KEY ||
+			 usage->type == EV_REL || usage->type == EV_ABS))
+		clear_bit(usage->code, *bit);
+
+	/* Ensure that Logitech wheels are not given a default fuzz/flat value */
+	if (usage->type == EV_ABS && (usage->code == ABS_X ||
+			usage->code == ABS_Y || usage->code == ABS_Z ||
+			usage->code == ABS_RZ)) {
+		switch (hdev->product) {
+		case USB_DEVICE_ID_LOGITECH_G29_WHEEL:
+		case USB_DEVICE_ID_LOGITECH_WINGMAN_FG:
+		case USB_DEVICE_ID_LOGITECH_WINGMAN_FFG:
+		case USB_DEVICE_ID_LOGITECH_WHEEL:
+		case USB_DEVICE_ID_LOGITECH_MOMO_WHEEL:
+		case USB_DEVICE_ID_LOGITECH_DFP_WHEEL:
+		case USB_DEVICE_ID_LOGITECH_G25_WHEEL:
+		case USB_DEVICE_ID_LOGITECH_DFGT_WHEEL:
+		case USB_DEVICE_ID_LOGITECH_G27_WHEEL:
+		case USB_DEVICE_ID_LOGITECH_WII_WHEEL:
+		case USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2:
+		case USB_DEVICE_ID_LOGITECH_VIBRATION_WHEEL:
+			field->application = HID_GD_MULTIAXIS;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int lg_event(struct hid_device *hdev, struct hid_field *field,
+		struct hid_usage *usage, __s32 value)
+{
+	struct lg_drv_data *drv_data = hid_get_drvdata(hdev);
+
+	if ((drv_data->quirks & LG_INVERT_HWHEEL) && usage->code == REL_HWHEEL) {
+		input_event(field->hidinput->input, usage->type, usage->code,
+				-value);
+		return 1;
+	}
+	if (drv_data->quirks & LG_FF4) {
+		return lg4ff_adjust_input_event(hdev, field, usage, value, drv_data);
+	}
+
+	return 0;
+}
+
+static int lg_raw_event(struct hid_device *hdev, struct hid_report *report,
+		u8 *rd, int size)
+{
+	struct lg_drv_data *drv_data = hid_get_drvdata(hdev);
+
+	if (drv_data->quirks & LG_FF4)
+		return lg4ff_raw_event(hdev, report, rd, size, drv_data);
+
+	return 0;
+}
+
+static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	struct usb_interface *iface;
+	__u8 iface_num;
+	unsigned int connect_mask = HID_CONNECT_DEFAULT;
+	struct lg_drv_data *drv_data;
+	int ret;
+
+	if (!hid_is_usb(hdev))
+		return -EINVAL;
+
+	iface = to_usb_interface(hdev->dev.parent);
+	iface_num = iface->cur_altsetting->desc.bInterfaceNumber;
+
+	/* G29 only work with the 1st interface */
+	if ((hdev->product == USB_DEVICE_ID_LOGITECH_G29_WHEEL) &&
+	    (iface_num != 0)) {
+		dbg_hid("%s: ignoring ifnum %d\n", __func__, iface_num);
+		return -ENODEV;
+	}
+
+	drv_data = kzalloc(sizeof(struct lg_drv_data), GFP_KERNEL);
+	if (!drv_data) {
+		hid_err(hdev, "Insufficient memory, cannot allocate driver data\n");
+		return -ENOMEM;
+	}
+	drv_data->quirks = id->driver_data;
+
+	hid_set_drvdata(hdev, (void *)drv_data);
+
+	if (drv_data->quirks & LG_NOGET)
+		hdev->quirks |= HID_QUIRK_NOGET;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		goto err_free;
+	}
+
+	if (drv_data->quirks & (LG_FF | LG_FF2 | LG_FF3 | LG_FF4))
+		connect_mask &= ~HID_CONNECT_FF;
+
+	ret = hid_hw_start(hdev, connect_mask);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		goto err_free;
+	}
+
+	/* Setup wireless link with Logitech Wii wheel */
+	if (hdev->product == USB_DEVICE_ID_LOGITECH_WII_WHEEL) {
+		static const unsigned char cbuf[] = {
+			0x00, 0xAF,  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+		};
+		u8 *buf = kmemdup(cbuf, sizeof(cbuf), GFP_KERNEL);
+
+		if (!buf) {
+			ret = -ENOMEM;
+			goto err_stop;
+		}
+
+		ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(cbuf),
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+		if (ret >= 0) {
+			/* insert a little delay of 10 jiffies ~ 40ms */
+			wait_queue_head_t wait;
+			init_waitqueue_head (&wait);
+			wait_event_interruptible_timeout(wait, 0,
+							 msecs_to_jiffies(40));
+
+			/* Select random Address */
+			buf[1] = 0xB2;
+			get_random_bytes(&buf[2], 2);
+
+			ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(cbuf),
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+		}
+		kfree(buf);
+	}
+
+	if (drv_data->quirks & LG_FF)
+		ret = lgff_init(hdev);
+	else if (drv_data->quirks & LG_FF2)
+		ret = lg2ff_init(hdev);
+	else if (drv_data->quirks & LG_FF3)
+		ret = lg3ff_init(hdev);
+	else if (drv_data->quirks & LG_FF4)
+		ret = lg4ff_init(hdev);
+
+	if (ret)
+		goto err_stop;
+
+	return 0;
+
+err_stop:
+	hid_hw_stop(hdev);
+err_free:
+	kfree(drv_data);
+	return ret;
+}
+
+static void lg_remove(struct hid_device *hdev)
+{
+	struct lg_drv_data *drv_data = hid_get_drvdata(hdev);
+	if (drv_data->quirks & LG_FF4)
+		lg4ff_deinit(hdev);
+	hid_hw_stop(hdev);
+	kfree(drv_data);
+}
+
+static const struct hid_device_id lg_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER),
+		.driver_data = LG_RDESC | LG_WIRELESS },
+
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RECEIVER),
+		.driver_data = LG_BAD_RELATIVE_KEYS },
+
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_DESKTOP),
+		.driver_data = LG_DUPLICATE_USAGES },
+
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_ELITE_KBD),
+		.driver_data = LG_IGNORE_DOUBLED_WHEEL | LG_EXPANDED_KEYMAP },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500),
+		.driver_data = LG_IGNORE_DOUBLED_WHEEL | LG_EXPANDED_KEYMAP },
+
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_EXTREME_3D),
+		.driver_data = LG_NOGET },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DUAL_ACTION),
+		.driver_data = LG_NOGET },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL),
+		.driver_data = LG_NOGET | LG_FF4 },
+
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD_CORD),
+		.driver_data = LG_FF2 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD),
+		.driver_data = LG_FF },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2),
+		.driver_data = LG_FF },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G29_WHEEL),
+		.driver_data = LG_FF4 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D),
+		.driver_data = LG_FF },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO),
+		.driver_data = LG_FF },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL),
+		.driver_data = LG_NOGET | LG_FF4 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2),
+		.driver_data = LG_FF4 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_VIBRATION_WHEEL),
+		.driver_data = LG_FF2 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL),
+		.driver_data = LG_FF4 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFGT_WHEEL),
+		.driver_data = LG_FF4 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL),
+		.driver_data = LG_FF4 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFP_WHEEL),
+		.driver_data = LG_NOGET | LG_FF4 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL),
+		.driver_data = LG_FF4 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FG),
+		.driver_data = LG_NOGET },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG),
+		.driver_data = LG_NOGET | LG_FF4 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
+		.driver_data = LG_NOGET | LG_FF2 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940),
+		.driver_data = LG_FF3 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR),
+		.driver_data = LG_RDESC_REL_ABS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER),
+		.driver_data = LG_RDESC_REL_ABS },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(hid, lg_devices);
+
+static struct hid_driver lg_driver = {
+	.name = "logitech",
+	.id_table = lg_devices,
+	.report_fixup = lg_report_fixup,
+	.input_mapping = lg_input_mapping,
+	.input_mapped = lg_input_mapped,
+	.event = lg_event,
+	.raw_event = lg_raw_event,
+	.probe = lg_probe,
+	.remove = lg_remove,
+};
+module_hid_driver(lg_driver);
+
+#ifdef CONFIG_LOGIWHEELS_FF
+int lg4ff_no_autoswitch = 0;
+module_param_named(lg4ff_no_autoswitch, lg4ff_no_autoswitch, int, S_IRUGO);
+MODULE_PARM_DESC(lg4ff_no_autoswitch, "Do not switch multimode wheels to their native mode automatically");
+#endif
+
+MODULE_LICENSE("GPL");