Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 237 insertions, 0 deletions

diff --git a/drivers/hid/hid-plantronics.c b/drivers/hid/hid-plantronics.c
new file mode 100644
index 000000000..3d414ae19
--- /dev/null
+++ b/drivers/hid/hid-plantronics.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Plantronics USB HID Driver
+ *
+ *  Copyright (c) 2014 JD Cole <jd.cole@plantronics.com>
+ *  Copyright (c) 2015-2018 Terry Junge <terry.junge@plantronics.com>
+ */
+
+/*
+ */
+
+#include "hid-ids.h"
+
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+
+#define PLT_HID_1_0_PAGE	0xffa00000
+#define PLT_HID_2_0_PAGE	0xffa20000
+
+#define PLT_BASIC_TELEPHONY	0x0003
+#define PLT_BASIC_EXCEPTION	0x0005
+
+#define PLT_VOL_UP		0x00b1
+#define PLT_VOL_DOWN		0x00b2
+
+#define PLT1_VOL_UP		(PLT_HID_1_0_PAGE | PLT_VOL_UP)
+#define PLT1_VOL_DOWN		(PLT_HID_1_0_PAGE | PLT_VOL_DOWN)
+#define PLT2_VOL_UP		(PLT_HID_2_0_PAGE | PLT_VOL_UP)
+#define PLT2_VOL_DOWN		(PLT_HID_2_0_PAGE | PLT_VOL_DOWN)
+
+#define PLT_DA60		0xda60
+#define PLT_BT300_MIN		0x0413
+#define PLT_BT300_MAX		0x0418
+
+
+#define PLT_ALLOW_CONSUMER (field->application == HID_CP_CONSUMERCONTROL && \
+			    (usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER)
+
+#define PLT_QUIRK_DOUBLE_VOLUME_KEYS BIT(0)
+
+#define PLT_DOUBLE_KEY_TIMEOUT 5 /* ms */
+
+struct plt_drv_data {
+	unsigned long device_type;
+	unsigned long last_volume_key_ts;
+	u32 quirks;
+};
+
+static int plantronics_input_mapping(struct hid_device *hdev,
+				     struct hid_input *hi,
+				     struct hid_field *field,
+				     struct hid_usage *usage,
+				     unsigned long **bit, int *max)
+{
+	unsigned short mapped_key;
+	struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
+	unsigned long plt_type = drv_data->device_type;
+
+	/* special case for PTT products */
+	if (field->application == HID_GD_JOYSTICK)
+		goto defaulted;
+
+	/* handle volume up/down mapping */
+	/* non-standard types or multi-HID interfaces - plt_type is PID */
+	if (!(plt_type & HID_USAGE_PAGE)) {
+		switch (plt_type) {
+		case PLT_DA60:
+			if (PLT_ALLOW_CONSUMER)
+				goto defaulted;
+			goto ignored;
+		default:
+			if (PLT_ALLOW_CONSUMER)
+				goto defaulted;
+		}
+	}
+	/* handle standard types - plt_type is 0xffa0uuuu or 0xffa2uuuu */
+	/* 'basic telephony compliant' - allow default consumer page map */
+	else if ((plt_type & HID_USAGE) >= PLT_BASIC_TELEPHONY &&
+		 (plt_type & HID_USAGE) != PLT_BASIC_EXCEPTION) {
+		if (PLT_ALLOW_CONSUMER)
+			goto defaulted;
+	}
+	/* not 'basic telephony' - apply legacy mapping */
+	/* only map if the field is in the device's primary vendor page */
+	else if (!((field->application ^ plt_type) & HID_USAGE_PAGE)) {
+		switch (usage->hid) {
+		case PLT1_VOL_UP:
+		case PLT2_VOL_UP:
+			mapped_key = KEY_VOLUMEUP;
+			goto mapped;
+		case PLT1_VOL_DOWN:
+		case PLT2_VOL_DOWN:
+			mapped_key = KEY_VOLUMEDOWN;
+			goto mapped;
+		}
+	}
+
+/*
+ * Future mapping of call control or other usages,
+ * if and when keys are defined would go here
+ * otherwise, ignore everything else that was not mapped
+ */
+
+ignored:
+	return -1;
+
+defaulted:
+	hid_dbg(hdev, "usage: %08x (appl: %08x) - defaulted\n",
+		usage->hid, field->application);
+	return 0;
+
+mapped:
+	hid_map_usage_clear(hi, usage, bit, max, EV_KEY, mapped_key);
+	hid_dbg(hdev, "usage: %08x (appl: %08x) - mapped to key %d\n",
+		usage->hid, field->application, mapped_key);
+	return 1;
+}
+
+static int plantronics_event(struct hid_device *hdev, struct hid_field *field,
+			     struct hid_usage *usage, __s32 value)
+{
+	struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
+
+	if (drv_data->quirks & PLT_QUIRK_DOUBLE_VOLUME_KEYS) {
+		unsigned long prev_ts, cur_ts;
+
+		/* Usages are filtered in plantronics_usages. */
+
+		if (!value) /* Handle key presses only. */
+			return 0;
+
+		prev_ts = drv_data->last_volume_key_ts;
+		cur_ts = jiffies;
+		if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_DOUBLE_KEY_TIMEOUT)
+			return 1; /* Ignore the repeated key. */
+
+		drv_data->last_volume_key_ts = cur_ts;
+	}
+
+	return 0;
+}
+
+static unsigned long plantronics_device_type(struct hid_device *hdev)
+{
+	unsigned i, col_page;
+	unsigned long plt_type = hdev->product;
+
+	/* multi-HID interfaces? - plt_type is PID */
+	if (plt_type >= PLT_BT300_MIN && plt_type <= PLT_BT300_MAX)
+		goto exit;
+
+	/* determine primary vendor page */
+	for (i = 0; i < hdev->maxcollection; i++) {
+		col_page = hdev->collection[i].usage & HID_USAGE_PAGE;
+		if (col_page == PLT_HID_2_0_PAGE) {
+			plt_type = hdev->collection[i].usage;
+			break;
+		}
+		if (col_page == PLT_HID_1_0_PAGE)
+			plt_type = hdev->collection[i].usage;
+	}
+
+exit:
+	hid_dbg(hdev, "plt_type decoded as: %08lx\n", plt_type);
+	return plt_type;
+}
+
+static int plantronics_probe(struct hid_device *hdev,
+			     const struct hid_device_id *id)
+{
+	struct plt_drv_data *drv_data;
+	int ret;
+
+	drv_data = devm_kzalloc(&hdev->dev, sizeof(*drv_data), GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		goto err;
+	}
+
+	drv_data->device_type = plantronics_device_type(hdev);
+	drv_data->quirks = id->driver_data;
+	drv_data->last_volume_key_ts = jiffies - msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT);
+
+	hid_set_drvdata(hdev, drv_data);
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT |
+		HID_CONNECT_HIDINPUT_FORCE | HID_CONNECT_HIDDEV_FORCE);
+	if (ret)
+		hid_err(hdev, "hw start failed\n");
+
+err:
+	return ret;
+}
+
+static const struct hid_device_id plantronics_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
+					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3210_SERIES),
+		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
+					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES),
+		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
+					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3215_SERIES),
+		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
+					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3225_SERIES),
+		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, plantronics_devices);
+
+static const struct hid_usage_id plantronics_usages[] = {
+	{ HID_CP_VOLUMEUP, EV_KEY, HID_ANY_ID },
+	{ HID_CP_VOLUMEDOWN, EV_KEY, HID_ANY_ID },
+	{ HID_TERMINATOR, HID_TERMINATOR, HID_TERMINATOR }
+};
+
+static struct hid_driver plantronics_driver = {
+	.name = "plantronics",
+	.id_table = plantronics_devices,
+	.usage_table = plantronics_usages,
+	.input_mapping = plantronics_input_mapping,
+	.event = plantronics_event,
+	.probe = plantronics_probe,
+};
+module_hid_driver(plantronics_driver);
+
+MODULE_AUTHOR("JD Cole <jd.cole@plantronics.com>");
+MODULE_AUTHOR("Terry Junge <terry.junge@plantronics.com>");
+MODULE_DESCRIPTION("Plantronics USB HID Driver");
+MODULE_LICENSE("GPL");