Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 402 insertions, 0 deletions

diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
new file mode 100644
index 000000000..eaf6e5e04
--- /dev/null
+++ b/drivers/hwmon/adm1029.c
@@ -0,0 +1,402 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
+ *
+ * Copyright (C) 2006 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Based on LM83 Driver by Jean Delvare <jdelvare@suse.de>
+ *
+ * Give only processor, motherboard temperatures and fan tachs
+ * Very rare chip please let me know if you use it
+ *
+ * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/*
+ * Addresses to scan
+ */
+
+static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+						0x2e, 0x2f, I2C_CLIENT_END
+};
+
+/*
+ * The ADM1029 registers
+ * Manufacturer ID is 0x41 for Analog Devices
+ */
+
+#define ADM1029_REG_MAN_ID			0x0D
+#define ADM1029_REG_CHIP_ID			0x0E
+#define ADM1029_REG_CONFIG			0x01
+#define ADM1029_REG_NB_FAN_SUPPORT		0x02
+
+#define ADM1029_REG_TEMP_DEVICES_INSTALLED	0x06
+
+#define ADM1029_REG_LOCAL_TEMP			0xA0
+#define ADM1029_REG_REMOTE1_TEMP		0xA1
+#define ADM1029_REG_REMOTE2_TEMP		0xA2
+
+#define ADM1029_REG_LOCAL_TEMP_HIGH		0x90
+#define ADM1029_REG_REMOTE1_TEMP_HIGH		0x91
+#define ADM1029_REG_REMOTE2_TEMP_HIGH		0x92
+
+#define ADM1029_REG_LOCAL_TEMP_LOW		0x98
+#define ADM1029_REG_REMOTE1_TEMP_LOW		0x99
+#define ADM1029_REG_REMOTE2_TEMP_LOW		0x9A
+
+#define ADM1029_REG_FAN1			0x70
+#define ADM1029_REG_FAN2			0x71
+
+#define ADM1029_REG_FAN1_MIN			0x78
+#define ADM1029_REG_FAN2_MIN			0x79
+
+#define ADM1029_REG_FAN1_CONFIG			0x68
+#define ADM1029_REG_FAN2_CONFIG			0x69
+
+#define TEMP_FROM_REG(val)	((val) * 1000)
+
+#define DIV_FROM_REG(val)	(1 << (((val) >> 6) - 1))
+
+/* Registers to be checked by adm1029_update_device() */
+static const u8 ADM1029_REG_TEMP[] = {
+	ADM1029_REG_LOCAL_TEMP,
+	ADM1029_REG_REMOTE1_TEMP,
+	ADM1029_REG_REMOTE2_TEMP,
+	ADM1029_REG_LOCAL_TEMP_HIGH,
+	ADM1029_REG_REMOTE1_TEMP_HIGH,
+	ADM1029_REG_REMOTE2_TEMP_HIGH,
+	ADM1029_REG_LOCAL_TEMP_LOW,
+	ADM1029_REG_REMOTE1_TEMP_LOW,
+	ADM1029_REG_REMOTE2_TEMP_LOW,
+};
+
+static const u8 ADM1029_REG_FAN[] = {
+	ADM1029_REG_FAN1,
+	ADM1029_REG_FAN2,
+	ADM1029_REG_FAN1_MIN,
+	ADM1029_REG_FAN2_MIN,
+};
+
+static const u8 ADM1029_REG_FAN_DIV[] = {
+	ADM1029_REG_FAN1_CONFIG,
+	ADM1029_REG_FAN2_CONFIG,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct adm1029_data {
+	struct i2c_client *client;
+	struct mutex update_lock; /* protect register access */
+	bool valid;		/* false until following fields are valid */
+	unsigned long last_updated;	/* in jiffies */
+
+	/* registers values, signed for temperature, unsigned for other stuff */
+	s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)];
+	u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)];
+	u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)];
+};
+
+/*
+ * function that update the status of the chips (temperature for example)
+ */
+static struct adm1029_data *adm1029_update_device(struct device *dev)
+{
+	struct adm1029_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+
+	mutex_lock(&data->update_lock);
+	/*
+	 * Use the "cache" Luke, don't recheck values
+	 * if there are already checked not a long time later
+	 */
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		int nr;
+
+		dev_dbg(&client->dev, "Updating adm1029 data\n");
+
+		for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) {
+			data->temp[nr] =
+			    i2c_smbus_read_byte_data(client,
+						     ADM1029_REG_TEMP[nr]);
+		}
+		for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) {
+			data->fan[nr] =
+			    i2c_smbus_read_byte_data(client,
+						     ADM1029_REG_FAN[nr]);
+		}
+		for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) {
+			data->fan_div[nr] =
+			    i2c_smbus_read_byte_data(client,
+						     ADM1029_REG_FAN_DIV[nr]);
+		}
+
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t
+temp_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adm1029_data *data = adm1029_update_device(dev);
+
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
+}
+
+static ssize_t
+fan_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adm1029_data *data = adm1029_update_device(dev);
+	u16 val;
+
+	if (data->fan[attr->index] == 0 ||
+	    (data->fan_div[attr->index] & 0xC0) == 0 ||
+	    data->fan[attr->index] == 255) {
+		return sprintf(buf, "0\n");
+	}
+
+	val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index])
+	    / data->fan[attr->index];
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+fan_div_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adm1029_data *data = adm1029_update_device(dev);
+
+	if ((data->fan_div[attr->index] & 0xC0) == 0)
+		return sprintf(buf, "0\n");
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
+}
+
+static ssize_t fan_div_store(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf, size_t count)
+{
+	struct adm1029_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	u8 reg;
+	long val;
+	int ret = kstrtol(buf, 10, &val);
+
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&data->update_lock);
+
+	/*Read actual config */
+	reg = i2c_smbus_read_byte_data(client,
+				       ADM1029_REG_FAN_DIV[attr->index]);
+
+	switch (val) {
+	case 1:
+		val = 1;
+		break;
+	case 2:
+		val = 2;
+		break;
+	case 4:
+		val = 3;
+		break;
+	default:
+		mutex_unlock(&data->update_lock);
+		dev_err(&client->dev,
+			"fan_div value %ld not supported. Choose one of 1, 2 or 4!\n",
+			val);
+		return -EINVAL;
+	}
+	/* Update the value */
+	reg = (reg & 0x3F) | (val << 6);
+
+	/* Update the cache */
+	data->fan_div[attr->index] = reg;
+
+	/* Write value */
+	i2c_smbus_write_byte_data(client,
+				  ADM1029_REG_FAN_DIV[attr->index], reg);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/* Access rights on sysfs. */
+static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
+static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
+static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
+
+static SENSOR_DEVICE_ATTR_RO(temp1_max, temp, 3);
+static SENSOR_DEVICE_ATTR_RO(temp2_max, temp, 4);
+static SENSOR_DEVICE_ATTR_RO(temp3_max, temp, 5);
+
+static SENSOR_DEVICE_ATTR_RO(temp1_min, temp, 6);
+static SENSOR_DEVICE_ATTR_RO(temp2_min, temp, 7);
+static SENSOR_DEVICE_ATTR_RO(temp3_min, temp, 8);
+
+static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
+static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
+
+static SENSOR_DEVICE_ATTR_RO(fan1_min, fan, 2);
+static SENSOR_DEVICE_ATTR_RO(fan2_min, fan, 3);
+
+static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
+static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
+
+static struct attribute *adm1029_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_div.dev_attr.attr,
+	&sensor_dev_attr_fan2_div.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(adm1029);
+
+/*
+ * Real code
+ */
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1029_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/*
+	 * ADM1029 doesn't have CHIP ID, check just MAN ID
+	 * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED,
+	 * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values
+	 * documented
+	 */
+
+	man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
+	chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
+	temp_devices_installed = i2c_smbus_read_byte_data(client,
+					ADM1029_REG_TEMP_DEVICES_INSTALLED);
+	nb_fan_support = i2c_smbus_read_byte_data(client,
+						  ADM1029_REG_NB_FAN_SUPPORT);
+	/* 0x41 is Analog Devices */
+	if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01 ||
+	    nb_fan_support != 0x03)
+		return -ENODEV;
+
+	if ((chip_id & 0xF0) != 0x00) {
+		/*
+		 * There are no "official" CHIP ID, so actually
+		 * we use Major/Minor revision for that
+		 */
+		pr_info("Unknown major revision %x, please let us know\n",
+			chip_id);
+		return -ENODEV;
+	}
+
+	strscpy(info->type, "adm1029", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int adm1029_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
+	if ((config & 0x10) == 0) {
+		i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG,
+					  config | 0x10);
+	}
+	/* recheck config */
+	config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
+	if ((config & 0x10) == 0) {
+		dev_err(&client->dev, "Initialization failed!\n");
+		return 0;
+	}
+	return 1;
+}
+
+static int adm1029_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct adm1029_data *data;
+	struct device *hwmon_dev;
+
+	data = devm_kzalloc(dev, sizeof(struct adm1029_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	mutex_init(&data->update_lock);
+
+	/*
+	 * Initialize the ADM1029 chip
+	 * Check config register
+	 */
+	if (adm1029_init_client(client) == 0)
+		return -ENODEV;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   data,
+							   adm1029_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id adm1029_id[] = {
+	{ "adm1029", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1029_id);
+
+static struct i2c_driver adm1029_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name = "adm1029",
+	},
+	.probe_new	= adm1029_probe,
+	.id_table	= adm1029_id,
+	.detect		= adm1029_detect,
+	.address_list	= normal_i2c,
+};
+
+module_i2c_driver(adm1029_driver);
+
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
+MODULE_DESCRIPTION("adm1029 driver");
+MODULE_LICENSE("GPL v2");