Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 487 insertions, 0 deletions

diff --git a/drivers/hwmon/emc6w201.c b/drivers/hwmon/emc6w201.c
new file mode 100644
index 000000000..bcd93f0fe
--- /dev/null
+++ b/drivers/hwmon/emc6w201.c
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * emc6w201.c - Hardware monitoring driver for the SMSC EMC6W201
+ * Copyright (C) 2011  Jean Delvare <jdelvare@suse.de>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/*
+ * Addresses to scan
+ */
+
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+
+/*
+ * The EMC6W201 registers
+ */
+
+#define EMC6W201_REG_IN(nr)		(0x20 + (nr))
+#define EMC6W201_REG_TEMP(nr)		(0x26 + (nr))
+#define EMC6W201_REG_FAN(nr)		(0x2C + (nr) * 2)
+#define EMC6W201_REG_COMPANY		0x3E
+#define EMC6W201_REG_VERSTEP		0x3F
+#define EMC6W201_REG_CONFIG		0x40
+#define EMC6W201_REG_IN_LOW(nr)		(0x4A + (nr) * 2)
+#define EMC6W201_REG_IN_HIGH(nr)	(0x4B + (nr) * 2)
+#define EMC6W201_REG_TEMP_LOW(nr)	(0x56 + (nr) * 2)
+#define EMC6W201_REG_TEMP_HIGH(nr)	(0x57 + (nr) * 2)
+#define EMC6W201_REG_FAN_MIN(nr)	(0x62 + (nr) * 2)
+
+enum subfeature { input, min, max };
+
+/*
+ * Per-device data
+ */
+
+struct emc6w201_data {
+	struct i2c_client *client;
+	struct mutex update_lock;
+	bool valid; /* false until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	u8 in[3][6];
+	s8 temp[3][6];
+	u16 fan[2][5];
+};
+
+/*
+ * Combine LSB and MSB registers in a single value
+ * Locking: must be called with data->update_lock held
+ */
+static u16 emc6w201_read16(struct i2c_client *client, u8 reg)
+{
+	int lsb, msb;
+
+	lsb = i2c_smbus_read_byte_data(client, reg);
+	msb = i2c_smbus_read_byte_data(client, reg + 1);
+	if (unlikely(lsb < 0 || msb < 0)) {
+		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
+			16, "read", reg);
+		return 0xFFFF;	/* Arbitrary value */
+	}
+
+	return (msb << 8) | lsb;
+}
+
+/*
+ * Write 16-bit value to LSB and MSB registers
+ * Locking: must be called with data->update_lock held
+ */
+static int emc6w201_write16(struct i2c_client *client, u8 reg, u16 val)
+{
+	int err;
+
+	err = i2c_smbus_write_byte_data(client, reg, val & 0xff);
+	if (likely(!err))
+		err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
+	if (unlikely(err < 0))
+		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
+			16, "write", reg);
+
+	return err;
+}
+
+/* Read 8-bit value from register */
+static u8 emc6w201_read8(struct i2c_client *client, u8 reg)
+{
+	int val;
+
+	val = i2c_smbus_read_byte_data(client, reg);
+	if (unlikely(val < 0)) {
+		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
+			8, "read", reg);
+		return 0x00;	/* Arbitrary value */
+	}
+
+	return val;
+}
+
+/* Write 8-bit value to register */
+static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val)
+{
+	int err;
+
+	err = i2c_smbus_write_byte_data(client, reg, val);
+	if (unlikely(err < 0))
+		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
+			8, "write", reg);
+
+	return err;
+}
+
+static struct emc6w201_data *emc6w201_update_device(struct device *dev)
+{
+	struct emc6w201_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int nr;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		for (nr = 0; nr < 6; nr++) {
+			data->in[input][nr] =
+				emc6w201_read8(client,
+						EMC6W201_REG_IN(nr));
+			data->in[min][nr] =
+				emc6w201_read8(client,
+						EMC6W201_REG_IN_LOW(nr));
+			data->in[max][nr] =
+				emc6w201_read8(client,
+						EMC6W201_REG_IN_HIGH(nr));
+		}
+
+		for (nr = 0; nr < 6; nr++) {
+			data->temp[input][nr] =
+				emc6w201_read8(client,
+						EMC6W201_REG_TEMP(nr));
+			data->temp[min][nr] =
+				emc6w201_read8(client,
+						EMC6W201_REG_TEMP_LOW(nr));
+			data->temp[max][nr] =
+				emc6w201_read8(client,
+						EMC6W201_REG_TEMP_HIGH(nr));
+		}
+
+		for (nr = 0; nr < 5; nr++) {
+			data->fan[input][nr] =
+				emc6w201_read16(client,
+						EMC6W201_REG_FAN(nr));
+			data->fan[min][nr] =
+				emc6w201_read16(client,
+						EMC6W201_REG_FAN_MIN(nr));
+		}
+
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+/*
+ * Sysfs callback functions
+ */
+
+static const s16 nominal_mv[6] = { 2500, 1500, 3300, 5000, 1500, 1500 };
+
+static ssize_t in_show(struct device *dev, struct device_attribute *devattr,
+		       char *buf)
+{
+	struct emc6w201_data *data = emc6w201_update_device(dev);
+	int sf = to_sensor_dev_attr_2(devattr)->index;
+	int nr = to_sensor_dev_attr_2(devattr)->nr;
+
+	return sprintf(buf, "%u\n",
+		       (unsigned)data->in[sf][nr] * nominal_mv[nr] / 0xC0);
+}
+
+static ssize_t in_store(struct device *dev, struct device_attribute *devattr,
+			const char *buf, size_t count)
+{
+	struct emc6w201_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int sf = to_sensor_dev_attr_2(devattr)->index;
+	int nr = to_sensor_dev_attr_2(devattr)->nr;
+	int err;
+	long val;
+	u8 reg;
+
+	err = kstrtol(buf, 10, &val);
+	if (err < 0)
+		return err;
+
+	val = clamp_val(val, 0, 255 * nominal_mv[nr] / 192);
+	val = DIV_ROUND_CLOSEST(val * 192, nominal_mv[nr]);
+	reg = (sf == min) ? EMC6W201_REG_IN_LOW(nr)
+			  : EMC6W201_REG_IN_HIGH(nr);
+
+	mutex_lock(&data->update_lock);
+	data->in[sf][nr] = val;
+	err = emc6w201_write8(client, reg, data->in[sf][nr]);
+	mutex_unlock(&data->update_lock);
+
+	return err < 0 ? err : count;
+}
+
+static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct emc6w201_data *data = emc6w201_update_device(dev);
+	int sf = to_sensor_dev_attr_2(devattr)->index;
+	int nr = to_sensor_dev_attr_2(devattr)->nr;
+
+	return sprintf(buf, "%d\n", (int)data->temp[sf][nr] * 1000);
+}
+
+static ssize_t temp_store(struct device *dev,
+			  struct device_attribute *devattr, const char *buf,
+			  size_t count)
+{
+	struct emc6w201_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int sf = to_sensor_dev_attr_2(devattr)->index;
+	int nr = to_sensor_dev_attr_2(devattr)->nr;
+	int err;
+	long val;
+	u8 reg;
+
+	err = kstrtol(buf, 10, &val);
+	if (err < 0)
+		return err;
+
+	val = clamp_val(val, -127000, 127000);
+	val = DIV_ROUND_CLOSEST(val, 1000);
+	reg = (sf == min) ? EMC6W201_REG_TEMP_LOW(nr)
+			  : EMC6W201_REG_TEMP_HIGH(nr);
+
+	mutex_lock(&data->update_lock);
+	data->temp[sf][nr] = val;
+	err = emc6w201_write8(client, reg, data->temp[sf][nr]);
+	mutex_unlock(&data->update_lock);
+
+	return err < 0 ? err : count;
+}
+
+static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct emc6w201_data *data = emc6w201_update_device(dev);
+	int sf = to_sensor_dev_attr_2(devattr)->index;
+	int nr = to_sensor_dev_attr_2(devattr)->nr;
+	unsigned rpm;
+
+	if (data->fan[sf][nr] == 0 || data->fan[sf][nr] == 0xFFFF)
+		rpm = 0;
+	else
+		rpm = 5400000U / data->fan[sf][nr];
+
+	return sprintf(buf, "%u\n", rpm);
+}
+
+static ssize_t fan_store(struct device *dev, struct device_attribute *devattr,
+			 const char *buf, size_t count)
+{
+	struct emc6w201_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int sf = to_sensor_dev_attr_2(devattr)->index;
+	int nr = to_sensor_dev_attr_2(devattr)->nr;
+	int err;
+	unsigned long val;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err < 0)
+		return err;
+
+	if (val == 0) {
+		val = 0xFFFF;
+	} else {
+		val = DIV_ROUND_CLOSEST(5400000U, val);
+		val = clamp_val(val, 0, 0xFFFE);
+	}
+
+	mutex_lock(&data->update_lock);
+	data->fan[sf][nr] = val;
+	err = emc6w201_write16(client, EMC6W201_REG_FAN_MIN(nr),
+			       data->fan[sf][nr]);
+	mutex_unlock(&data->update_lock);
+
+	return err < 0 ? err : count;
+}
+
+static SENSOR_DEVICE_ATTR_2_RO(in0_input, in, 0, input);
+static SENSOR_DEVICE_ATTR_2_RW(in0_min, in, 0, min);
+static SENSOR_DEVICE_ATTR_2_RW(in0_max, in, 0, max);
+static SENSOR_DEVICE_ATTR_2_RO(in1_input, in, 1, input);
+static SENSOR_DEVICE_ATTR_2_RW(in1_min, in, 1, min);
+static SENSOR_DEVICE_ATTR_2_RW(in1_max, in, 1, max);
+static SENSOR_DEVICE_ATTR_2_RO(in2_input, in, 2, input);
+static SENSOR_DEVICE_ATTR_2_RW(in2_min, in, 2, min);
+static SENSOR_DEVICE_ATTR_2_RW(in2_max, in, 2, max);
+static SENSOR_DEVICE_ATTR_2_RO(in3_input, in, 3, input);
+static SENSOR_DEVICE_ATTR_2_RW(in3_min, in, 3, min);
+static SENSOR_DEVICE_ATTR_2_RW(in3_max, in, 3, max);
+static SENSOR_DEVICE_ATTR_2_RO(in4_input, in, 4, input);
+static SENSOR_DEVICE_ATTR_2_RW(in4_min, in, 4, min);
+static SENSOR_DEVICE_ATTR_2_RW(in4_max, in, 4, max);
+static SENSOR_DEVICE_ATTR_2_RO(in5_input, in, 5, input);
+static SENSOR_DEVICE_ATTR_2_RW(in5_min, in, 5, min);
+static SENSOR_DEVICE_ATTR_2_RW(in5_max, in, 5, max);
+
+static SENSOR_DEVICE_ATTR_2_RO(temp1_input, temp, 0, input);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_min, temp, 0, min);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0, max);
+static SENSOR_DEVICE_ATTR_2_RO(temp2_input, temp, 1, input);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_min, temp, 1, min);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_max, temp, 1, max);
+static SENSOR_DEVICE_ATTR_2_RO(temp3_input, temp, 2, input);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_min, temp, 2, min);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_max, temp, 2, max);
+static SENSOR_DEVICE_ATTR_2_RO(temp4_input, temp, 3, input);
+static SENSOR_DEVICE_ATTR_2_RW(temp4_min, temp, 3, min);
+static SENSOR_DEVICE_ATTR_2_RW(temp4_max, temp, 3, max);
+static SENSOR_DEVICE_ATTR_2_RO(temp5_input, temp, 4, input);
+static SENSOR_DEVICE_ATTR_2_RW(temp5_min, temp, 4, min);
+static SENSOR_DEVICE_ATTR_2_RW(temp5_max, temp, 4, max);
+static SENSOR_DEVICE_ATTR_2_RO(temp6_input, temp, 5, input);
+static SENSOR_DEVICE_ATTR_2_RW(temp6_min, temp, 5, min);
+static SENSOR_DEVICE_ATTR_2_RW(temp6_max, temp, 5, max);
+
+static SENSOR_DEVICE_ATTR_2_RO(fan1_input, fan, 0, input);
+static SENSOR_DEVICE_ATTR_2_RW(fan1_min, fan, 0, min);
+static SENSOR_DEVICE_ATTR_2_RO(fan2_input, fan, 1, input);
+static SENSOR_DEVICE_ATTR_2_RW(fan2_min, fan, 1, min);
+static SENSOR_DEVICE_ATTR_2_RO(fan3_input, fan, 2, input);
+static SENSOR_DEVICE_ATTR_2_RW(fan3_min, fan, 2, min);
+static SENSOR_DEVICE_ATTR_2_RO(fan4_input, fan, 3, input);
+static SENSOR_DEVICE_ATTR_2_RW(fan4_min, fan, 3, min);
+static SENSOR_DEVICE_ATTR_2_RO(fan5_input, fan, 4, input);
+static SENSOR_DEVICE_ATTR_2_RW(fan5_min, fan, 4, min);
+
+static struct attribute *emc6w201_attrs[] = {
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in5_min.dev_attr.attr,
+	&sensor_dev_attr_in5_max.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp4_input.dev_attr.attr,
+	&sensor_dev_attr_temp4_min.dev_attr.attr,
+	&sensor_dev_attr_temp4_max.dev_attr.attr,
+	&sensor_dev_attr_temp5_input.dev_attr.attr,
+	&sensor_dev_attr_temp5_min.dev_attr.attr,
+	&sensor_dev_attr_temp5_max.dev_attr.attr,
+	&sensor_dev_attr_temp6_input.dev_attr.attr,
+	&sensor_dev_attr_temp6_min.dev_attr.attr,
+	&sensor_dev_attr_temp6_max.dev_attr.attr,
+
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan5_input.dev_attr.attr,
+	&sensor_dev_attr_fan5_min.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(emc6w201);
+
+/*
+ * Driver interface
+ */
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int emc6w201_detect(struct i2c_client *client,
+			   struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	int company, verstep, config;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/* Identification */
+	company = i2c_smbus_read_byte_data(client, EMC6W201_REG_COMPANY);
+	if (company != 0x5C)
+		return -ENODEV;
+	verstep = i2c_smbus_read_byte_data(client, EMC6W201_REG_VERSTEP);
+	if (verstep < 0 || (verstep & 0xF0) != 0xB0)
+		return -ENODEV;
+	if ((verstep & 0x0F) > 2) {
+		dev_dbg(&client->dev, "Unknown EMC6W201 stepping %d\n",
+			verstep & 0x0F);
+		return -ENODEV;
+	}
+
+	/* Check configuration */
+	config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG);
+	if (config < 0 || (config & 0xF4) != 0x04)
+		return -ENODEV;
+	if (!(config & 0x01)) {
+		dev_err(&client->dev, "Monitoring not enabled\n");
+		return -ENODEV;
+	}
+
+	strscpy(info->type, "emc6w201", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int emc6w201_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct emc6w201_data *data;
+	struct device *hwmon_dev;
+
+	data = devm_kzalloc(dev, sizeof(struct emc6w201_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	mutex_init(&data->update_lock);
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   data,
+							   emc6w201_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id emc6w201_id[] = {
+	{ "emc6w201", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, emc6w201_id);
+
+static struct i2c_driver emc6w201_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "emc6w201",
+	},
+	.probe_new	= emc6w201_probe,
+	.id_table	= emc6w201_id,
+	.detect		= emc6w201_detect,
+	.address_list	= normal_i2c,
+};
+
+module_i2c_driver(emc6w201_driver);
+
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("SMSC EMC6W201 hardware monitoring driver");
+MODULE_LICENSE("GPL");