Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 421 insertions, 0 deletions

diff --git a/drivers/hwmon/gsc-hwmon.c b/drivers/hwmon/gsc-hwmon.c
new file mode 100644
index 000000000..73e5d92b2
--- /dev/null
+++ b/drivers/hwmon/gsc-hwmon.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Gateworks System Controller Hardware Monitor module
+ *
+ * Copyright (C) 2020 Gateworks Corporation
+ */
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mfd/gsc.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <linux/platform_data/gsc_hwmon.h>
+
+#define GSC_HWMON_MAX_TEMP_CH	16
+#define GSC_HWMON_MAX_IN_CH	16
+#define GSC_HWMON_MAX_FAN_CH	16
+
+#define GSC_HWMON_RESOLUTION	12
+#define GSC_HWMON_VREF		2500
+
+struct gsc_hwmon_data {
+	struct gsc_dev *gsc;
+	struct gsc_hwmon_platform_data *pdata;
+	struct regmap *regmap;
+	const struct gsc_hwmon_channel *temp_ch[GSC_HWMON_MAX_TEMP_CH];
+	const struct gsc_hwmon_channel *in_ch[GSC_HWMON_MAX_IN_CH];
+	const struct gsc_hwmon_channel *fan_ch[GSC_HWMON_MAX_FAN_CH];
+	u32 temp_config[GSC_HWMON_MAX_TEMP_CH + 1];
+	u32 in_config[GSC_HWMON_MAX_IN_CH + 1];
+	u32 fan_config[GSC_HWMON_MAX_FAN_CH + 1];
+	struct hwmon_channel_info temp_info;
+	struct hwmon_channel_info in_info;
+	struct hwmon_channel_info fan_info;
+	const struct hwmon_channel_info *info[4];
+	struct hwmon_chip_info chip;
+};
+
+static struct regmap_bus gsc_hwmon_regmap_bus = {
+	.reg_read = gsc_read,
+	.reg_write = gsc_write,
+};
+
+static const struct regmap_config gsc_hwmon_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_NONE,
+};
+
+static ssize_t pwm_auto_point_temp_show(struct device *dev,
+					struct device_attribute *devattr,
+					char *buf)
+{
+	struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	u8 reg = hwmon->pdata->fan_base + (2 * attr->index);
+	u8 regs[2];
+	int ret;
+
+	ret = regmap_bulk_read(hwmon->regmap, reg, regs, 2);
+	if (ret)
+		return ret;
+
+	ret = regs[0] | regs[1] << 8;
+	return sprintf(buf, "%d\n", ret * 10);
+}
+
+static ssize_t pwm_auto_point_temp_store(struct device *dev,
+					 struct device_attribute *devattr,
+					 const char *buf, size_t count)
+{
+	struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	u8 reg = hwmon->pdata->fan_base + (2 * attr->index);
+	u8 regs[2];
+	long temp;
+	int err;
+
+	if (kstrtol(buf, 10, &temp))
+		return -EINVAL;
+
+	temp = clamp_val(temp, 0, 10000);
+	temp = DIV_ROUND_CLOSEST(temp, 10);
+
+	regs[0] = temp & 0xff;
+	regs[1] = (temp >> 8) & 0xff;
+	err = regmap_bulk_write(hwmon->regmap, reg, regs, 2);
+	if (err)
+		return err;
+
+	return count;
+}
+
+static ssize_t pwm_auto_point_pwm_show(struct device *dev,
+				       struct device_attribute *devattr,
+				       char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return sprintf(buf, "%d\n", 255 * (50 + (attr->index * 10)) / 100);
+}
+
+static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point1_pwm, pwm_auto_point_pwm, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, pwm_auto_point_temp, 0);
+
+static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point2_pwm, pwm_auto_point_pwm, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, pwm_auto_point_temp, 1);
+
+static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point3_pwm, pwm_auto_point_pwm, 2);
+static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, pwm_auto_point_temp, 2);
+
+static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point4_pwm, pwm_auto_point_pwm, 3);
+static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, pwm_auto_point_temp, 3);
+
+static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point5_pwm, pwm_auto_point_pwm, 4);
+static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point5_temp, pwm_auto_point_temp, 4);
+
+static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point6_pwm, pwm_auto_point_pwm, 5);
+static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point6_temp, pwm_auto_point_temp, 5);
+
+static struct attribute *gsc_hwmon_attributes[] = {
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group gsc_hwmon_group = {
+	.attrs = gsc_hwmon_attributes,
+};
+__ATTRIBUTE_GROUPS(gsc_hwmon);
+
+static int
+gsc_hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+	       int channel, long *val)
+{
+	struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev);
+	const struct gsc_hwmon_channel *ch;
+	int sz, ret;
+	long tmp;
+	u8 buf[3];
+
+	switch (type) {
+	case hwmon_in:
+		ch = hwmon->in_ch[channel];
+		break;
+	case hwmon_temp:
+		ch = hwmon->temp_ch[channel];
+		break;
+	case hwmon_fan:
+		ch = hwmon->fan_ch[channel];
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	sz = (ch->mode == mode_voltage_24bit) ? 3 : 2;
+	ret = regmap_bulk_read(hwmon->regmap, ch->reg, buf, sz);
+	if (ret)
+		return ret;
+
+	tmp = 0;
+	while (sz-- > 0)
+		tmp |= (buf[sz] << (8 * sz));
+
+	switch (ch->mode) {
+	case mode_temperature:
+		if (tmp > 0x8000)
+			tmp -= 0xffff;
+		tmp *= 100; /* convert to millidegrees celsius */
+		break;
+	case mode_voltage_raw:
+		tmp = clamp_val(tmp, 0, BIT(GSC_HWMON_RESOLUTION));
+		/* scale based on ref voltage and ADC resolution */
+		tmp *= GSC_HWMON_VREF;
+		tmp >>= GSC_HWMON_RESOLUTION;
+		/* scale based on optional voltage divider */
+		if (ch->vdiv[0] && ch->vdiv[1]) {
+			tmp *= (ch->vdiv[0] + ch->vdiv[1]);
+			tmp /= ch->vdiv[1];
+		}
+		/* adjust by uV offset */
+		tmp += ch->mvoffset;
+		break;
+	case mode_fan:
+		tmp *= 30; /* convert to revolutions per minute */
+		break;
+	case mode_voltage_24bit:
+	case mode_voltage_16bit:
+		/* no adjustment needed */
+		break;
+	}
+
+	*val = tmp;
+
+	return 0;
+}
+
+static int
+gsc_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
+		      u32 attr, int channel, const char **buf)
+{
+	struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_in:
+		*buf = hwmon->in_ch[channel]->name;
+		break;
+	case hwmon_temp:
+		*buf = hwmon->temp_ch[channel]->name;
+		break;
+	case hwmon_fan:
+		*buf = hwmon->fan_ch[channel]->name;
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static umode_t
+gsc_hwmon_is_visible(const void *_data, enum hwmon_sensor_types type, u32 attr,
+		     int ch)
+{
+	return 0444;
+}
+
+static const struct hwmon_ops gsc_hwmon_ops = {
+	.is_visible = gsc_hwmon_is_visible,
+	.read = gsc_hwmon_read,
+	.read_string = gsc_hwmon_read_string,
+};
+
+static struct gsc_hwmon_platform_data *
+gsc_hwmon_get_devtree_pdata(struct device *dev)
+{
+	struct gsc_hwmon_platform_data *pdata;
+	struct gsc_hwmon_channel *ch;
+	struct fwnode_handle *child;
+	struct device_node *fan;
+	int nchannels;
+
+	nchannels = device_get_child_node_count(dev);
+	if (nchannels == 0)
+		return ERR_PTR(-ENODEV);
+
+	pdata = devm_kzalloc(dev, struct_size(pdata, channels, nchannels),
+			     GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+	pdata->nchannels = nchannels;
+
+	/* fan controller base address */
+	of_node_get(dev->parent->of_node);
+	fan = of_find_compatible_node(dev->parent->of_node, NULL, "gw,gsc-fan");
+	if (fan && of_property_read_u32(fan, "reg", &pdata->fan_base)) {
+		of_node_put(fan);
+		dev_err(dev, "fan node without base\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	of_node_put(fan);
+
+	ch = pdata->channels;
+	/* allocate structures for channels and count instances of each type */
+	device_for_each_child_node(dev, child) {
+		if (fwnode_property_read_string(child, "label", &ch->name)) {
+			dev_err(dev, "channel without label\n");
+			fwnode_handle_put(child);
+			return ERR_PTR(-EINVAL);
+		}
+		if (fwnode_property_read_u32(child, "reg", &ch->reg)) {
+			dev_err(dev, "channel without reg\n");
+			fwnode_handle_put(child);
+			return ERR_PTR(-EINVAL);
+		}
+		if (fwnode_property_read_u32(child, "gw,mode", &ch->mode)) {
+			dev_err(dev, "channel without mode\n");
+			fwnode_handle_put(child);
+			return ERR_PTR(-EINVAL);
+		}
+		if (ch->mode > mode_max) {
+			dev_err(dev, "invalid channel mode\n");
+			fwnode_handle_put(child);
+			return ERR_PTR(-EINVAL);
+		}
+
+		if (!fwnode_property_read_u32(child,
+					      "gw,voltage-offset-microvolt",
+					      &ch->mvoffset))
+			ch->mvoffset /= 1000;
+		fwnode_property_read_u32_array(child,
+					       "gw,voltage-divider-ohms",
+					       ch->vdiv, ARRAY_SIZE(ch->vdiv));
+		ch++;
+	}
+
+	return pdata;
+}
+
+static int gsc_hwmon_probe(struct platform_device *pdev)
+{
+	struct gsc_dev *gsc = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct device *hwmon_dev;
+	struct gsc_hwmon_platform_data *pdata = dev_get_platdata(dev);
+	struct gsc_hwmon_data *hwmon;
+	const struct attribute_group **groups;
+	int i, i_in, i_temp, i_fan;
+
+	if (!pdata) {
+		pdata = gsc_hwmon_get_devtree_pdata(dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
+	hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+	hwmon->gsc = gsc;
+	hwmon->pdata = pdata;
+
+	hwmon->regmap = devm_regmap_init(dev, &gsc_hwmon_regmap_bus,
+					 gsc->i2c_hwmon,
+					 &gsc_hwmon_regmap_config);
+	if (IS_ERR(hwmon->regmap))
+		return PTR_ERR(hwmon->regmap);
+
+	for (i = 0, i_in = 0, i_temp = 0, i_fan = 0; i < hwmon->pdata->nchannels; i++) {
+		const struct gsc_hwmon_channel *ch = &pdata->channels[i];
+
+		switch (ch->mode) {
+		case mode_temperature:
+			if (i_temp == GSC_HWMON_MAX_TEMP_CH) {
+				dev_err(gsc->dev, "too many temp channels\n");
+				return -EINVAL;
+			}
+			hwmon->temp_ch[i_temp] = ch;
+			hwmon->temp_config[i_temp] = HWMON_T_INPUT |
+						     HWMON_T_LABEL;
+			i_temp++;
+			break;
+		case mode_fan:
+			if (i_fan == GSC_HWMON_MAX_FAN_CH) {
+				dev_err(gsc->dev, "too many fan channels\n");
+				return -EINVAL;
+			}
+			hwmon->fan_ch[i_fan] = ch;
+			hwmon->fan_config[i_fan] = HWMON_F_INPUT |
+						   HWMON_F_LABEL;
+			i_fan++;
+			break;
+		case mode_voltage_24bit:
+		case mode_voltage_16bit:
+		case mode_voltage_raw:
+			if (i_in == GSC_HWMON_MAX_IN_CH) {
+				dev_err(gsc->dev, "too many input channels\n");
+				return -EINVAL;
+			}
+			hwmon->in_ch[i_in] = ch;
+			hwmon->in_config[i_in] =
+				HWMON_I_INPUT | HWMON_I_LABEL;
+			i_in++;
+			break;
+		default:
+			dev_err(gsc->dev, "invalid mode: %d\n", ch->mode);
+			return -EINVAL;
+		}
+	}
+
+	/* setup config structures */
+	hwmon->chip.ops = &gsc_hwmon_ops;
+	hwmon->chip.info = hwmon->info;
+	hwmon->info[0] = &hwmon->temp_info;
+	hwmon->info[1] = &hwmon->in_info;
+	hwmon->info[2] = &hwmon->fan_info;
+	hwmon->temp_info.type = hwmon_temp;
+	hwmon->temp_info.config = hwmon->temp_config;
+	hwmon->in_info.type = hwmon_in;
+	hwmon->in_info.config = hwmon->in_config;
+	hwmon->fan_info.type = hwmon_fan;
+	hwmon->fan_info.config = hwmon->fan_config;
+
+	groups = pdata->fan_base ? gsc_hwmon_groups : NULL;
+	hwmon_dev = devm_hwmon_device_register_with_info(dev,
+							 KBUILD_MODNAME, hwmon,
+							 &hwmon->chip, groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct of_device_id gsc_hwmon_of_match[] = {
+	{ .compatible = "gw,gsc-adc", },
+	{}
+};
+
+static struct platform_driver gsc_hwmon_driver = {
+	.driver = {
+		.name = "gsc-hwmon",
+		.of_match_table = gsc_hwmon_of_match,
+	},
+	.probe = gsc_hwmon_probe,
+};
+
+module_platform_driver(gsc_hwmon_driver);
+
+MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
+MODULE_DESCRIPTION("GSC hardware monitor driver");
+MODULE_LICENSE("GPL v2");