Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 610 insertions, 0 deletions

diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c
new file mode 100644
index 000000000..c433f0af2
--- /dev/null
+++ b/drivers/hwmon/lm95245.c
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com>
+ *
+ * The LM95245 is a sensor chip made by TI / National Semiconductor.
+ * It reports up to two temperatures (its own plus an external one).
+ *
+ * This driver is based on lm95241.c
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+static const unsigned short normal_i2c[] = {
+	0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END };
+
+/* LM95245 registers */
+/* general registers */
+#define LM95245_REG_RW_CONFIG1		0x03
+#define LM95245_REG_RW_CONVERS_RATE	0x04
+#define LM95245_REG_W_ONE_SHOT		0x0F
+
+/* diode configuration */
+#define LM95245_REG_RW_CONFIG2		0xBF
+#define LM95245_REG_RW_REMOTE_OFFH	0x11
+#define LM95245_REG_RW_REMOTE_OFFL	0x12
+
+/* status registers */
+#define LM95245_REG_R_STATUS1		0x02
+#define LM95245_REG_R_STATUS2		0x33
+
+/* limit registers */
+#define LM95245_REG_RW_REMOTE_OS_LIMIT		0x07
+#define LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT	0x20
+#define LM95245_REG_RW_REMOTE_TCRIT_LIMIT	0x19
+#define LM95245_REG_RW_COMMON_HYSTERESIS	0x21
+
+/* temperature signed */
+#define LM95245_REG_R_LOCAL_TEMPH_S	0x00
+#define LM95245_REG_R_LOCAL_TEMPL_S	0x30
+#define LM95245_REG_R_REMOTE_TEMPH_S	0x01
+#define LM95245_REG_R_REMOTE_TEMPL_S	0x10
+/* temperature unsigned */
+#define LM95245_REG_R_REMOTE_TEMPH_U	0x31
+#define LM95245_REG_R_REMOTE_TEMPL_U	0x32
+
+/* id registers */
+#define LM95245_REG_R_MAN_ID		0xFE
+#define LM95245_REG_R_CHIP_ID		0xFF
+
+/* LM95245 specific bitfields */
+#define CFG_STOP		0x40
+#define CFG_REMOTE_TCRIT_MASK	0x10
+#define CFG_REMOTE_OS_MASK	0x08
+#define CFG_LOCAL_TCRIT_MASK	0x04
+#define CFG_LOCAL_OS_MASK	0x02
+
+#define CFG2_OS_A0		0x40
+#define CFG2_DIODE_FAULT_OS	0x20
+#define CFG2_DIODE_FAULT_TCRIT	0x10
+#define CFG2_REMOTE_TT		0x08
+#define CFG2_REMOTE_FILTER_DIS	0x00
+#define CFG2_REMOTE_FILTER_EN	0x06
+
+/* conversation rate in ms */
+#define RATE_CR0063	0x00
+#define RATE_CR0364	0x01
+#define RATE_CR1000	0x02
+#define RATE_CR2500	0x03
+
+#define STATUS1_ROS		0x10
+#define STATUS1_DIODE_FAULT	0x04
+#define STATUS1_RTCRIT		0x02
+#define STATUS1_LOC		0x01
+
+#define MANUFACTURER_ID		0x01
+#define LM95235_REVISION	0xB1
+#define LM95245_REVISION	0xB3
+
+/* Client data (each client gets its own) */
+struct lm95245_data {
+	struct regmap *regmap;
+	struct mutex update_lock;
+	int interval;	/* in msecs */
+};
+
+/* Conversions */
+static int temp_from_reg_unsigned(u8 val_h, u8 val_l)
+{
+	return val_h * 1000 + val_l * 1000 / 256;
+}
+
+static int temp_from_reg_signed(u8 val_h, u8 val_l)
+{
+	if (val_h & 0x80)
+		return (val_h - 0x100) * 1000;
+	return temp_from_reg_unsigned(val_h, val_l);
+}
+
+static int lm95245_read_conversion_rate(struct lm95245_data *data)
+{
+	unsigned int rate;
+	int ret;
+
+	ret = regmap_read(data->regmap, LM95245_REG_RW_CONVERS_RATE, &rate);
+	if (ret < 0)
+		return ret;
+
+	switch (rate) {
+	case RATE_CR0063:
+		data->interval = 63;
+		break;
+	case RATE_CR0364:
+		data->interval = 364;
+		break;
+	case RATE_CR1000:
+		data->interval = 1000;
+		break;
+	case RATE_CR2500:
+	default:
+		data->interval = 2500;
+		break;
+	}
+	return 0;
+}
+
+static int lm95245_set_conversion_rate(struct lm95245_data *data, long interval)
+{
+	int ret, rate;
+
+	if (interval <= 63) {
+		interval = 63;
+		rate = RATE_CR0063;
+	} else if (interval <= 364) {
+		interval = 364;
+		rate = RATE_CR0364;
+	} else if (interval <= 1000) {
+		interval = 1000;
+		rate = RATE_CR1000;
+	} else {
+		interval = 2500;
+		rate = RATE_CR2500;
+	}
+
+	ret = regmap_write(data->regmap, LM95245_REG_RW_CONVERS_RATE, rate);
+	if (ret < 0)
+		return ret;
+
+	data->interval = interval;
+	return 0;
+}
+
+static int lm95245_read_temp(struct device *dev, u32 attr, int channel,
+			     long *val)
+{
+	struct lm95245_data *data = dev_get_drvdata(dev);
+	struct regmap *regmap = data->regmap;
+	int ret, regl, regh, regvall, regvalh;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		regl = channel ? LM95245_REG_R_REMOTE_TEMPL_S :
+				 LM95245_REG_R_LOCAL_TEMPL_S;
+		regh = channel ? LM95245_REG_R_REMOTE_TEMPH_S :
+				 LM95245_REG_R_LOCAL_TEMPH_S;
+		ret = regmap_read(regmap, regl, &regvall);
+		if (ret < 0)
+			return ret;
+		ret = regmap_read(regmap, regh, &regvalh);
+		if (ret < 0)
+			return ret;
+		/*
+		 * Local temp is always signed.
+		 * Remote temp has both signed and unsigned data.
+		 * Use signed calculation for remote if signed bit is set
+		 * or if reported temperature is below signed limit.
+		 */
+		if (!channel || (regvalh & 0x80) || regvalh < 0x7f) {
+			*val = temp_from_reg_signed(regvalh, regvall);
+			return 0;
+		}
+		ret = regmap_read(regmap, LM95245_REG_R_REMOTE_TEMPL_U,
+				  &regvall);
+		if (ret < 0)
+			return ret;
+		ret = regmap_read(regmap, LM95245_REG_R_REMOTE_TEMPH_U,
+				  &regvalh);
+		if (ret < 0)
+			return ret;
+		*val = temp_from_reg_unsigned(regvalh, regvall);
+		return 0;
+	case hwmon_temp_max:
+		ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT,
+				  &regvalh);
+		if (ret < 0)
+			return ret;
+		*val = regvalh * 1000;
+		return 0;
+	case hwmon_temp_crit:
+		regh = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
+				 LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
+		ret = regmap_read(regmap, regh, &regvalh);
+		if (ret < 0)
+			return ret;
+		*val = regvalh * 1000;
+		return 0;
+	case hwmon_temp_max_hyst:
+		ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT,
+				  &regvalh);
+		if (ret < 0)
+			return ret;
+		ret = regmap_read(regmap, LM95245_REG_RW_COMMON_HYSTERESIS,
+				  &regvall);
+		if (ret < 0)
+			return ret;
+		*val = (regvalh - regvall) * 1000;
+		return 0;
+	case hwmon_temp_crit_hyst:
+		regh = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
+				 LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
+		ret = regmap_read(regmap, regh, &regvalh);
+		if (ret < 0)
+			return ret;
+		ret = regmap_read(regmap, LM95245_REG_RW_COMMON_HYSTERESIS,
+				  &regvall);
+		if (ret < 0)
+			return ret;
+		*val = (regvalh - regvall) * 1000;
+		return 0;
+	case hwmon_temp_type:
+		ret = regmap_read(regmap, LM95245_REG_RW_CONFIG2, &regvalh);
+		if (ret < 0)
+			return ret;
+		*val = (regvalh & CFG2_REMOTE_TT) ? 1 : 2;
+		return 0;
+	case hwmon_temp_offset:
+		ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OFFL,
+				  &regvall);
+		if (ret < 0)
+			return ret;
+		ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OFFH,
+				  &regvalh);
+		if (ret < 0)
+			return ret;
+		*val = temp_from_reg_signed(regvalh, regvall);
+		return 0;
+	case hwmon_temp_max_alarm:
+		ret = regmap_read(regmap, LM95245_REG_R_STATUS1, &regvalh);
+		if (ret < 0)
+			return ret;
+		*val = !!(regvalh & STATUS1_ROS);
+		return 0;
+	case hwmon_temp_crit_alarm:
+		ret = regmap_read(regmap, LM95245_REG_R_STATUS1, &regvalh);
+		if (ret < 0)
+			return ret;
+		*val = !!(regvalh & (channel ? STATUS1_RTCRIT : STATUS1_LOC));
+		return 0;
+	case hwmon_temp_fault:
+		ret = regmap_read(regmap, LM95245_REG_R_STATUS1, &regvalh);
+		if (ret < 0)
+			return ret;
+		*val = !!(regvalh & STATUS1_DIODE_FAULT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int lm95245_write_temp(struct device *dev, u32 attr, int channel,
+			      long val)
+{
+	struct lm95245_data *data = dev_get_drvdata(dev);
+	struct regmap *regmap = data->regmap;
+	unsigned int regval;
+	int ret, reg;
+
+	switch (attr) {
+	case hwmon_temp_max:
+		val = clamp_val(val / 1000, 0, 255);
+		ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT, val);
+		return ret;
+	case hwmon_temp_crit:
+		reg = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
+				LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
+		val = clamp_val(val / 1000, 0, channel ? 255 : 127);
+		ret = regmap_write(regmap, reg, val);
+		return ret;
+	case hwmon_temp_crit_hyst:
+		mutex_lock(&data->update_lock);
+		ret = regmap_read(regmap, LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT,
+				  &regval);
+		if (ret < 0) {
+			mutex_unlock(&data->update_lock);
+			return ret;
+		}
+		/* Clamp to reasonable range to prevent overflow */
+		val = clamp_val(val, -1000000, 1000000);
+		val = regval - val / 1000;
+		val = clamp_val(val, 0, 31);
+		ret = regmap_write(regmap, LM95245_REG_RW_COMMON_HYSTERESIS,
+				   val);
+		mutex_unlock(&data->update_lock);
+		return ret;
+	case hwmon_temp_offset:
+		val = clamp_val(val, -128000, 127875);
+		val = val * 256 / 1000;
+		mutex_lock(&data->update_lock);
+		ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OFFL,
+				   val & 0xe0);
+		if (ret < 0) {
+			mutex_unlock(&data->update_lock);
+			return ret;
+		}
+		ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OFFH,
+				   (val >> 8) & 0xff);
+		mutex_unlock(&data->update_lock);
+		return ret;
+	case hwmon_temp_type:
+		if (val != 1 && val != 2)
+			return -EINVAL;
+		ret = regmap_update_bits(regmap, LM95245_REG_RW_CONFIG2,
+					 CFG2_REMOTE_TT,
+					 val == 1 ? CFG2_REMOTE_TT : 0);
+		return ret;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int lm95245_read_chip(struct device *dev, u32 attr, int channel,
+			     long *val)
+{
+	struct lm95245_data *data = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_chip_update_interval:
+		*val = data->interval;
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int lm95245_write_chip(struct device *dev, u32 attr, int channel,
+			      long val)
+{
+	struct lm95245_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	switch (attr) {
+	case hwmon_chip_update_interval:
+		mutex_lock(&data->update_lock);
+		ret = lm95245_set_conversion_rate(data, val);
+		mutex_unlock(&data->update_lock);
+		return ret;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int lm95245_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_chip:
+		return lm95245_read_chip(dev, attr, channel, val);
+	case hwmon_temp:
+		return lm95245_read_temp(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int lm95245_write(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long val)
+{
+	switch (type) {
+	case hwmon_chip:
+		return lm95245_write_chip(dev, attr, channel, val);
+	case hwmon_temp:
+		return lm95245_write_temp(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t lm95245_temp_is_visible(const void *data, u32 attr, int channel)
+{
+	switch (attr) {
+	case hwmon_temp_input:
+	case hwmon_temp_max_alarm:
+	case hwmon_temp_max_hyst:
+	case hwmon_temp_crit_alarm:
+	case hwmon_temp_fault:
+		return 0444;
+	case hwmon_temp_type:
+	case hwmon_temp_max:
+	case hwmon_temp_crit:
+	case hwmon_temp_offset:
+		return 0644;
+	case hwmon_temp_crit_hyst:
+		return (channel == 0) ? 0644 : 0444;
+	default:
+		return 0;
+	}
+}
+
+static umode_t lm95245_is_visible(const void *data,
+				  enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_chip:
+		switch (attr) {
+		case hwmon_chip_update_interval:
+			return 0644;
+		default:
+			return 0;
+		}
+	case hwmon_temp:
+		return lm95245_temp_is_visible(data, attr, channel);
+	default:
+		return 0;
+	}
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm95245_detect(struct i2c_client *new_client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = new_client->adapter;
+	int address = new_client->addr;
+	const char *name;
+	int rev, id;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	id = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID);
+	if (id != MANUFACTURER_ID)
+		return -ENODEV;
+
+	rev = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID);
+	switch (rev) {
+	case LM95235_REVISION:
+		if (address != 0x18 && address != 0x29 && address != 0x4c)
+			return -ENODEV;
+		name = "lm95235";
+		break;
+	case LM95245_REVISION:
+		name = "lm95245";
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	strscpy(info->type, name, I2C_NAME_SIZE);
+	return 0;
+}
+
+static int lm95245_init_client(struct lm95245_data *data)
+{
+	int ret;
+
+	ret = lm95245_read_conversion_rate(data);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(data->regmap, LM95245_REG_RW_CONFIG1,
+				  CFG_STOP, 0);
+}
+
+static bool lm95245_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LM95245_REG_RW_CONFIG1:
+	case LM95245_REG_RW_CONVERS_RATE:
+	case LM95245_REG_W_ONE_SHOT:
+	case LM95245_REG_RW_CONFIG2:
+	case LM95245_REG_RW_REMOTE_OFFH:
+	case LM95245_REG_RW_REMOTE_OFFL:
+	case LM95245_REG_RW_REMOTE_OS_LIMIT:
+	case LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT:
+	case LM95245_REG_RW_REMOTE_TCRIT_LIMIT:
+	case LM95245_REG_RW_COMMON_HYSTERESIS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool lm95245_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LM95245_REG_R_STATUS1:
+	case LM95245_REG_R_STATUS2:
+	case LM95245_REG_R_LOCAL_TEMPH_S:
+	case LM95245_REG_R_LOCAL_TEMPL_S:
+	case LM95245_REG_R_REMOTE_TEMPH_S:
+	case LM95245_REG_R_REMOTE_TEMPL_S:
+	case LM95245_REG_R_REMOTE_TEMPH_U:
+	case LM95245_REG_R_REMOTE_TEMPL_U:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config lm95245_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.writeable_reg = lm95245_is_writeable_reg,
+	.volatile_reg = lm95245_is_volatile_reg,
+	.cache_type = REGCACHE_RBTREE,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static const struct hwmon_channel_info *lm95245_info[] = {
+	HWMON_CHANNEL_INFO(chip,
+			   HWMON_C_UPDATE_INTERVAL),
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_HYST |
+			   HWMON_T_CRIT_ALARM,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
+			   HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_FAULT |
+			   HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM |
+			   HWMON_T_TYPE | HWMON_T_OFFSET),
+	NULL
+};
+
+static const struct hwmon_ops lm95245_hwmon_ops = {
+	.is_visible = lm95245_is_visible,
+	.read = lm95245_read,
+	.write = lm95245_write,
+};
+
+static const struct hwmon_chip_info lm95245_chip_info = {
+	.ops = &lm95245_hwmon_ops,
+	.info = lm95245_info,
+};
+
+static int lm95245_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct lm95245_data *data;
+	struct device *hwmon_dev;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(struct lm95245_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->regmap = devm_regmap_init_i2c(client, &lm95245_regmap_config);
+	if (IS_ERR(data->regmap))
+		return PTR_ERR(data->regmap);
+
+	mutex_init(&data->update_lock);
+
+	/* Initialize the LM95245 chip */
+	ret = lm95245_init_client(data);
+	if (ret < 0)
+		return ret;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+							 data,
+							 &lm95245_chip_info,
+							 NULL);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+/* Driver data (common to all clients) */
+static const struct i2c_device_id lm95245_id[] = {
+	{ "lm95235", 0 },
+	{ "lm95245", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm95245_id);
+
+static const struct of_device_id __maybe_unused lm95245_of_match[] = {
+	{ .compatible = "national,lm95235" },
+	{ .compatible = "national,lm95245" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lm95245_of_match);
+
+static struct i2c_driver lm95245_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "lm95245",
+		.of_match_table = of_match_ptr(lm95245_of_match),
+	},
+	.probe_new	= lm95245_probe,
+	.id_table	= lm95245_id,
+	.detect		= lm95245_detect,
+	.address_list	= normal_i2c,
+};
+
+module_i2c_driver(lm95245_driver);
+
+MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>");
+MODULE_DESCRIPTION("LM95235/LM95245 sensor driver");
+MODULE_LICENSE("GPL");