Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 938 insertions, 0 deletions

diff --git a/drivers/hwmon/ltc2992.c b/drivers/hwmon/ltc2992.c
new file mode 100644
index 000000000..88514152d
--- /dev/null
+++ b/drivers/hwmon/ltc2992.c
@@ -0,0 +1,938 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * LTC2992 - Dual Wide Range Power Monitor
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define LTC2992_CTRLB			0x01
+#define LTC2992_FAULT1			0x03
+#define LTC2992_POWER1			0x05
+#define LTC2992_POWER1_MAX		0x08
+#define LTC2992_POWER1_MIN		0x0B
+#define LTC2992_POWER1_MAX_THRESH	0x0E
+#define LTC2992_POWER1_MIN_THRESH	0x11
+#define LTC2992_DSENSE1			0x14
+#define LTC2992_DSENSE1_MAX		0x16
+#define LTC2992_DSENSE1_MIN		0x18
+#define LTC2992_DSENSE1_MAX_THRESH	0x1A
+#define LTC2992_DSENSE1_MIN_THRESH	0x1C
+#define LTC2992_SENSE1			0x1E
+#define LTC2992_SENSE1_MAX		0x20
+#define LTC2992_SENSE1_MIN		0x22
+#define LTC2992_SENSE1_MAX_THRESH	0x24
+#define LTC2992_SENSE1_MIN_THRESH	0x26
+#define LTC2992_G1			0x28
+#define LTC2992_G1_MAX			0x2A
+#define LTC2992_G1_MIN			0x2C
+#define LTC2992_G1_MAX_THRESH		0x2E
+#define LTC2992_G1_MIN_THRESH		0x30
+#define LTC2992_FAULT2			0x35
+#define LTC2992_G2			0x5A
+#define LTC2992_G2_MAX			0x5C
+#define LTC2992_G2_MIN			0x5E
+#define LTC2992_G2_MAX_THRESH		0x60
+#define LTC2992_G2_MIN_THRESH		0x62
+#define LTC2992_G3			0x64
+#define LTC2992_G3_MAX			0x66
+#define LTC2992_G3_MIN			0x68
+#define LTC2992_G3_MAX_THRESH		0x6A
+#define LTC2992_G3_MIN_THRESH		0x6C
+#define LTC2992_G4			0x6E
+#define LTC2992_G4_MAX			0x70
+#define LTC2992_G4_MIN			0x72
+#define LTC2992_G4_MAX_THRESH		0x74
+#define LTC2992_G4_MIN_THRESH		0x76
+#define LTC2992_FAULT3			0x92
+#define LTC2992_GPIO_STATUS		0x95
+#define LTC2992_GPIO_IO_CTRL		0x96
+#define LTC2992_GPIO_CTRL		0x97
+
+#define LTC2992_POWER(x)		(LTC2992_POWER1 + ((x) * 0x32))
+#define LTC2992_POWER_MAX(x)		(LTC2992_POWER1_MAX + ((x) * 0x32))
+#define LTC2992_POWER_MIN(x)		(LTC2992_POWER1_MIN + ((x) * 0x32))
+#define LTC2992_POWER_MAX_THRESH(x)	(LTC2992_POWER1_MAX_THRESH + ((x) * 0x32))
+#define LTC2992_POWER_MIN_THRESH(x)	(LTC2992_POWER1_MIN_THRESH + ((x) * 0x32))
+#define LTC2992_DSENSE(x)		(LTC2992_DSENSE1 + ((x) * 0x32))
+#define LTC2992_DSENSE_MAX(x)		(LTC2992_DSENSE1_MAX + ((x) * 0x32))
+#define LTC2992_DSENSE_MIN(x)		(LTC2992_DSENSE1_MIN + ((x) * 0x32))
+#define LTC2992_DSENSE_MAX_THRESH(x)	(LTC2992_DSENSE1_MAX_THRESH + ((x) * 0x32))
+#define LTC2992_DSENSE_MIN_THRESH(x)	(LTC2992_DSENSE1_MIN_THRESH + ((x) * 0x32))
+#define LTC2992_SENSE(x)		(LTC2992_SENSE1 + ((x) * 0x32))
+#define LTC2992_SENSE_MAX(x)		(LTC2992_SENSE1_MAX + ((x) * 0x32))
+#define LTC2992_SENSE_MIN(x)		(LTC2992_SENSE1_MIN + ((x) * 0x32))
+#define LTC2992_SENSE_MAX_THRESH(x)	(LTC2992_SENSE1_MAX_THRESH + ((x) * 0x32))
+#define LTC2992_SENSE_MIN_THRESH(x)	(LTC2992_SENSE1_MIN_THRESH + ((x) * 0x32))
+#define LTC2992_POWER_FAULT(x)		(LTC2992_FAULT1 + ((x) * 0x32))
+#define LTC2992_SENSE_FAULT(x)		(LTC2992_FAULT1 + ((x) * 0x32))
+#define LTC2992_DSENSE_FAULT(x)		(LTC2992_FAULT1 + ((x) * 0x32))
+
+/* CTRLB register bitfields */
+#define LTC2992_RESET_HISTORY		BIT(3)
+
+/* FAULT1 FAULT2 registers common bitfields */
+#define LTC2992_POWER_FAULT_MSK(x)	(BIT(6) << (x))
+#define LTC2992_DSENSE_FAULT_MSK(x)	(BIT(4) << (x))
+#define LTC2992_SENSE_FAULT_MSK(x)	(BIT(2) << (x))
+
+/* FAULT1 bitfields */
+#define LTC2992_GPIO1_FAULT_MSK(x)	(BIT(0) << (x))
+
+/* FAULT2 bitfields */
+#define LTC2992_GPIO2_FAULT_MSK(x)	(BIT(0) << (x))
+
+/* FAULT3 bitfields */
+#define LTC2992_GPIO3_FAULT_MSK(x)	(BIT(6) << (x))
+#define LTC2992_GPIO4_FAULT_MSK(x)	(BIT(4) << (x))
+
+#define LTC2992_IADC_NANOV_LSB		12500
+#define LTC2992_VADC_UV_LSB		25000
+#define LTC2992_VADC_GPIO_UV_LSB	500
+
+#define LTC2992_GPIO_NR		4
+#define LTC2992_GPIO1_BIT	7
+#define LTC2992_GPIO2_BIT	6
+#define LTC2992_GPIO3_BIT	0
+#define LTC2992_GPIO4_BIT	6
+#define LTC2992_GPIO_BIT(x)	(LTC2992_GPIO_NR - (x) - 1)
+
+struct ltc2992_state {
+	struct i2c_client		*client;
+	struct gpio_chip		gc;
+	struct mutex			gpio_mutex; /* lock for gpio access */
+	const char			*gpio_names[LTC2992_GPIO_NR];
+	struct regmap			*regmap;
+	u32				r_sense_uohm[2];
+};
+
+struct ltc2992_gpio_regs {
+	u8	data;
+	u8	max;
+	u8	min;
+	u8	max_thresh;
+	u8	min_thresh;
+	u8	alarm;
+	u8	min_alarm_msk;
+	u8	max_alarm_msk;
+	u8	ctrl;
+	u8	ctrl_bit;
+};
+
+static const struct ltc2992_gpio_regs ltc2992_gpio_addr_map[] = {
+	{
+		.data = LTC2992_G1,
+		.max = LTC2992_G1_MAX,
+		.min = LTC2992_G1_MIN,
+		.max_thresh = LTC2992_G1_MAX_THRESH,
+		.min_thresh = LTC2992_G1_MIN_THRESH,
+		.alarm = LTC2992_FAULT1,
+		.min_alarm_msk = LTC2992_GPIO1_FAULT_MSK(0),
+		.max_alarm_msk = LTC2992_GPIO1_FAULT_MSK(1),
+		.ctrl = LTC2992_GPIO_IO_CTRL,
+		.ctrl_bit = LTC2992_GPIO1_BIT,
+	},
+	{
+		.data = LTC2992_G2,
+		.max = LTC2992_G2_MAX,
+		.min = LTC2992_G2_MIN,
+		.max_thresh = LTC2992_G2_MAX_THRESH,
+		.min_thresh = LTC2992_G2_MIN_THRESH,
+		.alarm = LTC2992_FAULT2,
+		.min_alarm_msk = LTC2992_GPIO2_FAULT_MSK(0),
+		.max_alarm_msk = LTC2992_GPIO2_FAULT_MSK(1),
+		.ctrl = LTC2992_GPIO_IO_CTRL,
+		.ctrl_bit = LTC2992_GPIO2_BIT,
+	},
+	{
+		.data = LTC2992_G3,
+		.max = LTC2992_G3_MAX,
+		.min = LTC2992_G3_MIN,
+		.max_thresh = LTC2992_G3_MAX_THRESH,
+		.min_thresh = LTC2992_G3_MIN_THRESH,
+		.alarm = LTC2992_FAULT3,
+		.min_alarm_msk = LTC2992_GPIO3_FAULT_MSK(0),
+		.max_alarm_msk = LTC2992_GPIO3_FAULT_MSK(1),
+		.ctrl = LTC2992_GPIO_IO_CTRL,
+		.ctrl_bit = LTC2992_GPIO3_BIT,
+	},
+	{
+		.data = LTC2992_G4,
+		.max = LTC2992_G4_MAX,
+		.min = LTC2992_G4_MIN,
+		.max_thresh = LTC2992_G4_MAX_THRESH,
+		.min_thresh = LTC2992_G4_MIN_THRESH,
+		.alarm = LTC2992_FAULT3,
+		.min_alarm_msk = LTC2992_GPIO4_FAULT_MSK(0),
+		.max_alarm_msk = LTC2992_GPIO4_FAULT_MSK(1),
+		.ctrl = LTC2992_GPIO_CTRL,
+		.ctrl_bit = LTC2992_GPIO4_BIT,
+	},
+};
+
+static const char *ltc2992_gpio_names[LTC2992_GPIO_NR] = {
+	"GPIO1", "GPIO2", "GPIO3", "GPIO4",
+};
+
+static int ltc2992_read_reg(struct ltc2992_state *st, u8 addr, const u8 reg_len)
+{
+	u8 regvals[4];
+	int val;
+	int ret;
+	int i;
+
+	ret = regmap_bulk_read(st->regmap, addr, regvals, reg_len);
+	if (ret < 0)
+		return ret;
+
+	val = 0;
+	for (i = 0; i < reg_len; i++)
+		val |= regvals[reg_len - i - 1] << (i * 8);
+
+	return val;
+}
+
+static int ltc2992_write_reg(struct ltc2992_state *st, u8 addr, const u8 reg_len, u32 val)
+{
+	u8 regvals[4];
+	int i;
+
+	for (i = 0; i < reg_len; i++)
+		regvals[reg_len - i - 1] = (val >> (i * 8)) & 0xFF;
+
+	return regmap_bulk_write(st->regmap, addr, regvals, reg_len);
+}
+
+static int ltc2992_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ltc2992_state *st = gpiochip_get_data(chip);
+	unsigned long gpio_status;
+	int reg;
+
+	mutex_lock(&st->gpio_mutex);
+	reg = ltc2992_read_reg(st, LTC2992_GPIO_STATUS, 1);
+	mutex_unlock(&st->gpio_mutex);
+
+	if (reg < 0)
+		return reg;
+
+	gpio_status = reg;
+
+	return !test_bit(LTC2992_GPIO_BIT(offset), &gpio_status);
+}
+
+static int ltc2992_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+				     unsigned long *bits)
+{
+	struct ltc2992_state *st = gpiochip_get_data(chip);
+	unsigned long gpio_status;
+	unsigned int gpio_nr;
+	int reg;
+
+	mutex_lock(&st->gpio_mutex);
+	reg = ltc2992_read_reg(st, LTC2992_GPIO_STATUS, 1);
+	mutex_unlock(&st->gpio_mutex);
+
+	if (reg < 0)
+		return reg;
+
+	gpio_status = reg;
+
+	for_each_set_bit(gpio_nr, mask, LTC2992_GPIO_NR) {
+		if (test_bit(LTC2992_GPIO_BIT(gpio_nr), &gpio_status))
+			set_bit(gpio_nr, bits);
+	}
+
+	return 0;
+}
+
+static void ltc2992_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct ltc2992_state *st = gpiochip_get_data(chip);
+	unsigned long gpio_ctrl;
+	int reg;
+
+	mutex_lock(&st->gpio_mutex);
+	reg = ltc2992_read_reg(st, ltc2992_gpio_addr_map[offset].ctrl, 1);
+	if (reg < 0) {
+		mutex_unlock(&st->gpio_mutex);
+		return;
+	}
+
+	gpio_ctrl = reg;
+	assign_bit(ltc2992_gpio_addr_map[offset].ctrl_bit, &gpio_ctrl, value);
+
+	ltc2992_write_reg(st, ltc2992_gpio_addr_map[offset].ctrl, 1, gpio_ctrl);
+	mutex_unlock(&st->gpio_mutex);
+}
+
+static void ltc2992_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+				      unsigned long *bits)
+{
+	struct ltc2992_state *st = gpiochip_get_data(chip);
+	unsigned long gpio_ctrl_io = 0;
+	unsigned long gpio_ctrl = 0;
+	unsigned int gpio_nr;
+
+	for_each_set_bit(gpio_nr, mask, LTC2992_GPIO_NR) {
+		if (gpio_nr < 3)
+			assign_bit(ltc2992_gpio_addr_map[gpio_nr].ctrl_bit, &gpio_ctrl_io, true);
+
+		if (gpio_nr == 3)
+			assign_bit(ltc2992_gpio_addr_map[gpio_nr].ctrl_bit, &gpio_ctrl, true);
+	}
+
+	mutex_lock(&st->gpio_mutex);
+	ltc2992_write_reg(st, LTC2992_GPIO_IO_CTRL, 1, gpio_ctrl_io);
+	ltc2992_write_reg(st, LTC2992_GPIO_CTRL, 1, gpio_ctrl);
+	mutex_unlock(&st->gpio_mutex);
+}
+
+static int ltc2992_config_gpio(struct ltc2992_state *st)
+{
+	const char *name = dev_name(&st->client->dev);
+	char *gpio_name;
+	int ret;
+	int i;
+
+	ret = ltc2992_write_reg(st, LTC2992_GPIO_IO_CTRL, 1, 0);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&st->gpio_mutex);
+
+	for (i = 0; i < ARRAY_SIZE(st->gpio_names); i++) {
+		gpio_name = devm_kasprintf(&st->client->dev, GFP_KERNEL, "ltc2992-%x-%s",
+					   st->client->addr, ltc2992_gpio_names[i]);
+		if (!gpio_name)
+			return -ENOMEM;
+
+		st->gpio_names[i] = gpio_name;
+	}
+
+	st->gc.label = name;
+	st->gc.parent = &st->client->dev;
+	st->gc.owner = THIS_MODULE;
+	st->gc.base = -1;
+	st->gc.names = st->gpio_names;
+	st->gc.ngpio = ARRAY_SIZE(st->gpio_names);
+	st->gc.get = ltc2992_gpio_get;
+	st->gc.get_multiple = ltc2992_gpio_get_multiple;
+	st->gc.set = ltc2992_gpio_set;
+	st->gc.set_multiple = ltc2992_gpio_set_multiple;
+
+	ret = devm_gpiochip_add_data(&st->client->dev, &st->gc, st);
+	if (ret)
+		dev_err(&st->client->dev, "GPIO registering failed (%d)\n", ret);
+
+	return ret;
+}
+
+static umode_t ltc2992_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
+				  int channel)
+{
+	const struct ltc2992_state *st = data;
+
+	switch (type) {
+	case hwmon_chip:
+		switch (attr) {
+		case hwmon_chip_in_reset_history:
+			return 0200;
+		}
+		break;
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_input:
+		case hwmon_in_lowest:
+		case hwmon_in_highest:
+		case hwmon_in_min_alarm:
+		case hwmon_in_max_alarm:
+			return 0444;
+		case hwmon_in_min:
+		case hwmon_in_max:
+			return 0644;
+		}
+		break;
+	case hwmon_curr:
+		switch (attr) {
+		case hwmon_curr_input:
+		case hwmon_curr_lowest:
+		case hwmon_curr_highest:
+		case hwmon_curr_min_alarm:
+		case hwmon_curr_max_alarm:
+			if (st->r_sense_uohm[channel])
+				return 0444;
+			break;
+		case hwmon_curr_min:
+		case hwmon_curr_max:
+			if (st->r_sense_uohm[channel])
+				return 0644;
+			break;
+		}
+		break;
+	case hwmon_power:
+		switch (attr) {
+		case hwmon_power_input:
+		case hwmon_power_input_lowest:
+		case hwmon_power_input_highest:
+		case hwmon_power_min_alarm:
+		case hwmon_power_max_alarm:
+			if (st->r_sense_uohm[channel])
+				return 0444;
+			break;
+		case hwmon_power_min:
+		case hwmon_power_max:
+			if (st->r_sense_uohm[channel])
+				return 0644;
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int ltc2992_get_voltage(struct ltc2992_state *st, u32 reg, u32 scale, long *val)
+{
+	int reg_val;
+
+	reg_val = ltc2992_read_reg(st, reg, 2);
+	if (reg_val < 0)
+		return reg_val;
+
+	reg_val = reg_val >> 4;
+	*val = DIV_ROUND_CLOSEST(reg_val * scale, 1000);
+
+	return 0;
+}
+
+static int ltc2992_set_voltage(struct ltc2992_state *st, u32 reg, u32 scale, long val)
+{
+	val = DIV_ROUND_CLOSEST(val * 1000, scale);
+	val = val << 4;
+
+	return ltc2992_write_reg(st, reg, 2, val);
+}
+
+static int ltc2992_read_gpio_alarm(struct ltc2992_state *st, int nr_gpio, u32 attr, long *val)
+{
+	int reg_val;
+	u32 mask;
+
+	if (attr == hwmon_in_max_alarm)
+		mask = ltc2992_gpio_addr_map[nr_gpio].max_alarm_msk;
+	else
+		mask = ltc2992_gpio_addr_map[nr_gpio].min_alarm_msk;
+
+	reg_val = ltc2992_read_reg(st, ltc2992_gpio_addr_map[nr_gpio].alarm, 1);
+	if (reg_val < 0)
+		return reg_val;
+
+	*val = !!(reg_val & mask);
+	reg_val &= ~mask;
+
+	return ltc2992_write_reg(st, ltc2992_gpio_addr_map[nr_gpio].alarm, 1, reg_val);
+}
+
+static int ltc2992_read_gpios_in(struct device *dev, u32 attr, int nr_gpio, long *val)
+{
+	struct ltc2992_state *st = dev_get_drvdata(dev);
+	u32 reg;
+
+	switch (attr) {
+	case hwmon_in_input:
+		reg = ltc2992_gpio_addr_map[nr_gpio].data;
+		break;
+	case hwmon_in_lowest:
+		reg = ltc2992_gpio_addr_map[nr_gpio].min;
+		break;
+	case hwmon_in_highest:
+		reg = ltc2992_gpio_addr_map[nr_gpio].max;
+		break;
+	case hwmon_in_min:
+		reg = ltc2992_gpio_addr_map[nr_gpio].min_thresh;
+		break;
+	case hwmon_in_max:
+		reg = ltc2992_gpio_addr_map[nr_gpio].max_thresh;
+		break;
+	case hwmon_in_min_alarm:
+	case hwmon_in_max_alarm:
+		return ltc2992_read_gpio_alarm(st, nr_gpio, attr, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ltc2992_get_voltage(st, reg, LTC2992_VADC_GPIO_UV_LSB, val);
+}
+
+static int ltc2992_read_in_alarm(struct ltc2992_state *st, int channel, long *val, u32 attr)
+{
+	int reg_val;
+	u32 mask;
+
+	if (attr == hwmon_in_max_alarm)
+		mask = LTC2992_SENSE_FAULT_MSK(1);
+	else
+		mask = LTC2992_SENSE_FAULT_MSK(0);
+
+	reg_val = ltc2992_read_reg(st, LTC2992_SENSE_FAULT(channel), 1);
+	if (reg_val < 0)
+		return reg_val;
+
+	*val = !!(reg_val & mask);
+	reg_val &= ~mask;
+
+	return ltc2992_write_reg(st, LTC2992_SENSE_FAULT(channel), 1, reg_val);
+}
+
+static int ltc2992_read_in(struct device *dev, u32 attr, int channel, long *val)
+{
+	struct ltc2992_state *st = dev_get_drvdata(dev);
+	u32 reg;
+
+	if (channel > 1)
+		return ltc2992_read_gpios_in(dev, attr, channel - 2, val);
+
+	switch (attr) {
+	case hwmon_in_input:
+		reg = LTC2992_SENSE(channel);
+		break;
+	case hwmon_in_lowest:
+		reg = LTC2992_SENSE_MIN(channel);
+		break;
+	case hwmon_in_highest:
+		reg = LTC2992_SENSE_MAX(channel);
+		break;
+	case hwmon_in_min:
+		reg = LTC2992_SENSE_MIN_THRESH(channel);
+		break;
+	case hwmon_in_max:
+		reg = LTC2992_SENSE_MAX_THRESH(channel);
+		break;
+	case hwmon_in_min_alarm:
+	case hwmon_in_max_alarm:
+		return ltc2992_read_in_alarm(st, channel, val, attr);
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ltc2992_get_voltage(st, reg, LTC2992_VADC_UV_LSB, val);
+}
+
+static int ltc2992_get_current(struct ltc2992_state *st, u32 reg, u32 channel, long *val)
+{
+	int reg_val;
+
+	reg_val = ltc2992_read_reg(st, reg, 2);
+	if (reg_val < 0)
+		return reg_val;
+
+	reg_val = reg_val >> 4;
+	*val = DIV_ROUND_CLOSEST(reg_val * LTC2992_IADC_NANOV_LSB, st->r_sense_uohm[channel]);
+
+	return 0;
+}
+
+static int ltc2992_set_current(struct ltc2992_state *st, u32 reg, u32 channel, long val)
+{
+	u32 reg_val;
+
+	reg_val = DIV_ROUND_CLOSEST(val * st->r_sense_uohm[channel], LTC2992_IADC_NANOV_LSB);
+	reg_val = reg_val << 4;
+
+	return ltc2992_write_reg(st, reg, 2, reg_val);
+}
+
+static int ltc2992_read_curr_alarm(struct ltc2992_state *st, int channel, long *val, u32 attr)
+{
+	int reg_val;
+	u32 mask;
+
+	if (attr == hwmon_curr_max_alarm)
+		mask = LTC2992_DSENSE_FAULT_MSK(1);
+	else
+		mask = LTC2992_DSENSE_FAULT_MSK(0);
+
+	reg_val = ltc2992_read_reg(st, LTC2992_DSENSE_FAULT(channel), 1);
+	if (reg_val < 0)
+		return reg_val;
+
+	*val = !!(reg_val & mask);
+
+	reg_val &= ~mask;
+	return ltc2992_write_reg(st, LTC2992_DSENSE_FAULT(channel), 1, reg_val);
+}
+
+static int ltc2992_read_curr(struct device *dev, u32 attr, int channel, long *val)
+{
+	struct ltc2992_state *st = dev_get_drvdata(dev);
+	u32 reg;
+
+	switch (attr) {
+	case hwmon_curr_input:
+		reg = LTC2992_DSENSE(channel);
+		break;
+	case hwmon_curr_lowest:
+		reg = LTC2992_DSENSE_MIN(channel);
+		break;
+	case hwmon_curr_highest:
+		reg = LTC2992_DSENSE_MAX(channel);
+		break;
+	case hwmon_curr_min:
+		reg = LTC2992_DSENSE_MIN_THRESH(channel);
+		break;
+	case hwmon_curr_max:
+		reg = LTC2992_DSENSE_MAX_THRESH(channel);
+		break;
+	case hwmon_curr_min_alarm:
+	case hwmon_curr_max_alarm:
+		return ltc2992_read_curr_alarm(st, channel, val, attr);
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ltc2992_get_current(st, reg, channel, val);
+}
+
+static int ltc2992_get_power(struct ltc2992_state *st, u32 reg, u32 channel, long *val)
+{
+	int reg_val;
+
+	reg_val = ltc2992_read_reg(st, reg, 3);
+	if (reg_val < 0)
+		return reg_val;
+
+	*val = mul_u64_u32_div(reg_val, LTC2992_VADC_UV_LSB * LTC2992_IADC_NANOV_LSB,
+			       st->r_sense_uohm[channel] * 1000);
+
+	return 0;
+}
+
+static int ltc2992_set_power(struct ltc2992_state *st, u32 reg, u32 channel, long val)
+{
+	u32 reg_val;
+
+	reg_val = mul_u64_u32_div(val, st->r_sense_uohm[channel] * 1000,
+				  LTC2992_VADC_UV_LSB * LTC2992_IADC_NANOV_LSB);
+
+	return ltc2992_write_reg(st, reg, 3, reg_val);
+}
+
+static int ltc2992_read_power_alarm(struct ltc2992_state *st, int channel, long *val, u32 attr)
+{
+	int reg_val;
+	u32 mask;
+
+	if (attr == hwmon_power_max_alarm)
+		mask = LTC2992_POWER_FAULT_MSK(1);
+	else
+		mask = LTC2992_POWER_FAULT_MSK(0);
+
+	reg_val = ltc2992_read_reg(st, LTC2992_POWER_FAULT(channel), 1);
+	if (reg_val < 0)
+		return reg_val;
+
+	*val = !!(reg_val & mask);
+	reg_val &= ~mask;
+
+	return ltc2992_write_reg(st, LTC2992_POWER_FAULT(channel), 1, reg_val);
+}
+
+static int ltc2992_read_power(struct device *dev, u32 attr, int channel, long *val)
+{
+	struct ltc2992_state *st = dev_get_drvdata(dev);
+	u32 reg;
+
+	switch (attr) {
+	case hwmon_power_input:
+		reg = LTC2992_POWER(channel);
+		break;
+	case hwmon_power_input_lowest:
+		reg = LTC2992_POWER_MIN(channel);
+		break;
+	case hwmon_power_input_highest:
+		reg = LTC2992_POWER_MAX(channel);
+		break;
+	case hwmon_power_min:
+		reg = LTC2992_POWER_MIN_THRESH(channel);
+		break;
+	case hwmon_power_max:
+		reg = LTC2992_POWER_MAX_THRESH(channel);
+		break;
+	case hwmon_power_min_alarm:
+	case hwmon_power_max_alarm:
+		return ltc2992_read_power_alarm(st, channel, val, attr);
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ltc2992_get_power(st, reg, channel, val);
+}
+
+static int ltc2992_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
+			long *val)
+{
+	switch (type) {
+	case hwmon_in:
+		return ltc2992_read_in(dev, attr, channel, val);
+	case hwmon_curr:
+		return ltc2992_read_curr(dev, attr, channel, val);
+	case hwmon_power:
+		return ltc2992_read_power(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int ltc2992_write_curr(struct device *dev, u32 attr, int channel, long val)
+{
+	struct ltc2992_state *st = dev_get_drvdata(dev);
+	u32 reg;
+
+	switch (attr) {
+	case hwmon_curr_min:
+		reg = LTC2992_DSENSE_MIN_THRESH(channel);
+		break;
+	case hwmon_curr_max:
+		reg = LTC2992_DSENSE_MAX_THRESH(channel);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ltc2992_set_current(st, reg, channel, val);
+}
+
+static int ltc2992_write_gpios_in(struct device *dev, u32 attr, int nr_gpio, long val)
+{
+	struct ltc2992_state *st = dev_get_drvdata(dev);
+	u32 reg;
+
+	switch (attr) {
+	case hwmon_in_min:
+		reg = ltc2992_gpio_addr_map[nr_gpio].min_thresh;
+		break;
+	case hwmon_in_max:
+		reg = ltc2992_gpio_addr_map[nr_gpio].max_thresh;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ltc2992_set_voltage(st, reg, LTC2992_VADC_GPIO_UV_LSB, val);
+}
+
+static int ltc2992_write_in(struct device *dev, u32 attr, int channel, long val)
+{
+	struct ltc2992_state *st = dev_get_drvdata(dev);
+	u32 reg;
+
+	if (channel > 1)
+		return ltc2992_write_gpios_in(dev, attr, channel - 2, val);
+
+	switch (attr) {
+	case hwmon_in_min:
+		reg = LTC2992_SENSE_MIN_THRESH(channel);
+		break;
+	case hwmon_in_max:
+		reg = LTC2992_SENSE_MAX_THRESH(channel);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ltc2992_set_voltage(st, reg, LTC2992_VADC_UV_LSB, val);
+}
+
+static int ltc2992_write_power(struct device *dev, u32 attr, int channel, long val)
+{
+	struct ltc2992_state *st = dev_get_drvdata(dev);
+	u32 reg;
+
+	switch (attr) {
+	case hwmon_power_min:
+		reg = LTC2992_POWER_MIN_THRESH(channel);
+		break;
+	case hwmon_power_max:
+		reg = LTC2992_POWER_MAX_THRESH(channel);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ltc2992_set_power(st, reg, channel, val);
+}
+
+static int ltc2992_write_chip(struct device *dev, u32 attr, int channel, long val)
+{
+	struct ltc2992_state *st = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_chip_in_reset_history:
+		return regmap_update_bits(st->regmap, LTC2992_CTRLB, LTC2992_RESET_HISTORY,
+					  LTC2992_RESET_HISTORY);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int ltc2992_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
+			 long val)
+{
+	switch (type) {
+	case hwmon_chip:
+		return ltc2992_write_chip(dev, attr, channel, val);
+	case hwmon_in:
+		return ltc2992_write_in(dev, attr, channel, val);
+	case hwmon_curr:
+		return ltc2992_write_curr(dev, attr, channel, val);
+	case hwmon_power:
+		return ltc2992_write_power(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_ops ltc2992_hwmon_ops = {
+	.is_visible = ltc2992_is_visible,
+	.read = ltc2992_read,
+	.write = ltc2992_write,
+};
+
+static const struct hwmon_channel_info *ltc2992_info[] = {
+	HWMON_CHANNEL_INFO(chip,
+			   HWMON_C_IN_RESET_HISTORY),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
+			   HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
+			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
+			   HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
+			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
+			   HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
+			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
+			   HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
+			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
+			   HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
+			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
+			   HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM),
+	HWMON_CHANNEL_INFO(curr,
+			   HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST | HWMON_C_MIN |
+			   HWMON_C_MAX | HWMON_C_MIN_ALARM | HWMON_C_MAX_ALARM,
+			   HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST | HWMON_C_MIN |
+			   HWMON_C_MAX | HWMON_C_MIN_ALARM | HWMON_C_MAX_ALARM),
+	HWMON_CHANNEL_INFO(power,
+			   HWMON_P_INPUT | HWMON_P_INPUT_LOWEST | HWMON_P_INPUT_HIGHEST |
+			   HWMON_P_MIN | HWMON_P_MAX | HWMON_P_MIN_ALARM | HWMON_P_MAX_ALARM,
+			   HWMON_P_INPUT | HWMON_P_INPUT_LOWEST | HWMON_P_INPUT_HIGHEST |
+			   HWMON_P_MIN | HWMON_P_MAX | HWMON_P_MIN_ALARM | HWMON_P_MAX_ALARM),
+	NULL
+};
+
+static const struct hwmon_chip_info ltc2992_chip_info = {
+	.ops = &ltc2992_hwmon_ops,
+	.info = ltc2992_info,
+};
+
+static const struct regmap_config ltc2992_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xE8,
+};
+
+static int ltc2992_parse_dt(struct ltc2992_state *st)
+{
+	struct fwnode_handle *fwnode;
+	struct fwnode_handle *child;
+	u32 addr;
+	u32 val;
+	int ret;
+
+	fwnode = dev_fwnode(&st->client->dev);
+
+	fwnode_for_each_available_child_node(fwnode, child) {
+		ret = fwnode_property_read_u32(child, "reg", &addr);
+		if (ret < 0) {
+			fwnode_handle_put(child);
+			return ret;
+		}
+
+		if (addr > 1) {
+			fwnode_handle_put(child);
+			return -EINVAL;
+		}
+
+		ret = fwnode_property_read_u32(child, "shunt-resistor-micro-ohms", &val);
+		if (!ret)
+			st->r_sense_uohm[addr] = val;
+	}
+
+	return 0;
+}
+
+static int ltc2992_i2c_probe(struct i2c_client *client)
+{
+	struct device *hwmon_dev;
+	struct ltc2992_state *st;
+	int ret;
+
+	st = devm_kzalloc(&client->dev, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	st->client = client;
+	st->regmap = devm_regmap_init_i2c(client, &ltc2992_regmap_config);
+	if (IS_ERR(st->regmap))
+		return PTR_ERR(st->regmap);
+
+	ret = ltc2992_parse_dt(st);
+	if (ret < 0)
+		return ret;
+
+	ret = ltc2992_config_gpio(st);
+	if (ret < 0)
+		return ret;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&client->dev, client->name, st,
+							 &ltc2992_chip_info, NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct of_device_id ltc2992_of_match[] = {
+	{ .compatible = "adi,ltc2992" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ltc2992_of_match);
+
+static const struct i2c_device_id ltc2992_i2c_id[] = {
+	{"ltc2992", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ltc2992_i2c_id);
+
+static struct i2c_driver ltc2992_i2c_driver = {
+	.driver = {
+		.name = "ltc2992",
+		.of_match_table = ltc2992_of_match,
+	},
+	.probe_new = ltc2992_i2c_probe,
+	.id_table = ltc2992_i2c_id,
+};
+
+module_i2c_driver(ltc2992_i2c_driver);
+
+MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>");
+MODULE_DESCRIPTION("Hwmon driver for Linear Technology 2992");
+MODULE_LICENSE("Dual BSD/GPL");