Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 558 insertions, 0 deletions

diff --git a/drivers/hwmon/max31790.c b/drivers/hwmon/max31790.c
new file mode 100644
index 000000000..20bf5ffad
--- /dev/null
+++ b/drivers/hwmon/max31790.c
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * max31790.c - Part of lm_sensors, Linux kernel modules for hardware
+ *             monitoring.
+ *
+ * (C) 2015 by Il Han <corone.il.han@gmail.com>
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/* MAX31790 registers */
+#define MAX31790_REG_GLOBAL_CONFIG	0x00
+#define MAX31790_REG_FAN_CONFIG(ch)	(0x02 + (ch))
+#define MAX31790_REG_FAN_DYNAMICS(ch)	(0x08 + (ch))
+#define MAX31790_REG_FAN_FAULT_STATUS2	0x10
+#define MAX31790_REG_FAN_FAULT_STATUS1	0x11
+#define MAX31790_REG_TACH_COUNT(ch)	(0x18 + (ch) * 2)
+#define MAX31790_REG_PWM_DUTY_CYCLE(ch)	(0x30 + (ch) * 2)
+#define MAX31790_REG_PWMOUT(ch)		(0x40 + (ch) * 2)
+#define MAX31790_REG_TARGET_COUNT(ch)	(0x50 + (ch) * 2)
+
+/* Fan Config register bits */
+#define MAX31790_FAN_CFG_RPM_MODE	0x80
+#define MAX31790_FAN_CFG_CTRL_MON	0x10
+#define MAX31790_FAN_CFG_TACH_INPUT_EN	0x08
+#define MAX31790_FAN_CFG_TACH_INPUT	0x01
+
+/* Fan Dynamics register bits */
+#define MAX31790_FAN_DYN_SR_SHIFT	5
+#define MAX31790_FAN_DYN_SR_MASK	0xE0
+#define SR_FROM_REG(reg)		(((reg) & MAX31790_FAN_DYN_SR_MASK) \
+					 >> MAX31790_FAN_DYN_SR_SHIFT)
+
+#define FAN_RPM_MIN			120
+#define FAN_RPM_MAX			7864320
+
+#define FAN_COUNT_REG_MAX		0xffe0
+
+#define RPM_FROM_REG(reg, sr)		(((reg) >> 4) ? \
+					 ((60 * (sr) * 8192) / ((reg) >> 4)) : \
+					 FAN_RPM_MAX)
+#define RPM_TO_REG(rpm, sr)		((60 * (sr) * 8192) / ((rpm) * 2))
+
+#define NR_CHANNEL			6
+
+/*
+ * Client data (each client gets its own)
+ */
+struct max31790_data {
+	struct i2c_client *client;
+	struct mutex update_lock;
+	bool valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* register values */
+	u8 fan_config[NR_CHANNEL];
+	u8 fan_dynamics[NR_CHANNEL];
+	u16 fault_status;
+	u16 tach[NR_CHANNEL * 2];
+	u16 pwm[NR_CHANNEL];
+	u16 target_count[NR_CHANNEL];
+};
+
+static struct max31790_data *max31790_update_device(struct device *dev)
+{
+	struct max31790_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	struct max31790_data *ret = data;
+	int i;
+	int rv;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		rv = i2c_smbus_read_byte_data(client,
+				MAX31790_REG_FAN_FAULT_STATUS1);
+		if (rv < 0)
+			goto abort;
+		data->fault_status |= rv & 0x3F;
+
+		rv = i2c_smbus_read_byte_data(client,
+				MAX31790_REG_FAN_FAULT_STATUS2);
+		if (rv < 0)
+			goto abort;
+		data->fault_status |= (rv & 0x3F) << 6;
+
+		for (i = 0; i < NR_CHANNEL; i++) {
+			rv = i2c_smbus_read_word_swapped(client,
+					MAX31790_REG_TACH_COUNT(i));
+			if (rv < 0)
+				goto abort;
+			data->tach[i] = rv;
+
+			if (data->fan_config[i]
+			    & MAX31790_FAN_CFG_TACH_INPUT) {
+				rv = i2c_smbus_read_word_swapped(client,
+					MAX31790_REG_TACH_COUNT(NR_CHANNEL
+								+ i));
+				if (rv < 0)
+					goto abort;
+				data->tach[NR_CHANNEL + i] = rv;
+			} else {
+				rv = i2c_smbus_read_word_swapped(client,
+						MAX31790_REG_PWM_DUTY_CYCLE(i));
+				if (rv < 0)
+					goto abort;
+				data->pwm[i] = rv;
+
+				rv = i2c_smbus_read_word_swapped(client,
+						MAX31790_REG_TARGET_COUNT(i));
+				if (rv < 0)
+					goto abort;
+				data->target_count[i] = rv;
+			}
+		}
+
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+	goto done;
+
+abort:
+	data->valid = false;
+	ret = ERR_PTR(rv);
+
+done:
+	mutex_unlock(&data->update_lock);
+
+	return ret;
+}
+
+static const u8 tach_period[8] = { 1, 2, 4, 8, 16, 32, 32, 32 };
+
+static u8 get_tach_period(u8 fan_dynamics)
+{
+	return tach_period[SR_FROM_REG(fan_dynamics)];
+}
+
+static u8 bits_for_tach_period(int rpm)
+{
+	u8 bits;
+
+	if (rpm < 500)
+		bits = 0x0;
+	else if (rpm < 1000)
+		bits = 0x1;
+	else if (rpm < 2000)
+		bits = 0x2;
+	else if (rpm < 4000)
+		bits = 0x3;
+	else if (rpm < 8000)
+		bits = 0x4;
+	else
+		bits = 0x5;
+
+	return bits;
+}
+
+static int max31790_read_fan(struct device *dev, u32 attr, int channel,
+			     long *val)
+{
+	struct max31790_data *data = max31790_update_device(dev);
+	int sr, rpm;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	switch (attr) {
+	case hwmon_fan_input:
+		sr = get_tach_period(data->fan_dynamics[channel % NR_CHANNEL]);
+		if (data->tach[channel] == FAN_COUNT_REG_MAX)
+			rpm = 0;
+		else
+			rpm = RPM_FROM_REG(data->tach[channel], sr);
+		*val = rpm;
+		return 0;
+	case hwmon_fan_target:
+		sr = get_tach_period(data->fan_dynamics[channel]);
+		rpm = RPM_FROM_REG(data->target_count[channel], sr);
+		*val = rpm;
+		return 0;
+	case hwmon_fan_fault:
+		mutex_lock(&data->update_lock);
+		*val = !!(data->fault_status & (1 << channel));
+		data->fault_status &= ~(1 << channel);
+		/*
+		 * If a fault bit is set, we need to write into one of the fan
+		 * configuration registers to clear it. Note that this also
+		 * clears the fault for the companion channel if enabled.
+		 */
+		if (*val) {
+			int reg = MAX31790_REG_TARGET_COUNT(channel % NR_CHANNEL);
+
+			i2c_smbus_write_byte_data(data->client, reg,
+						  data->target_count[channel % NR_CHANNEL] >> 8);
+		}
+		mutex_unlock(&data->update_lock);
+		return 0;
+	case hwmon_fan_enable:
+		*val = !!(data->fan_config[channel] & MAX31790_FAN_CFG_TACH_INPUT_EN);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int max31790_write_fan(struct device *dev, u32 attr, int channel,
+			      long val)
+{
+	struct max31790_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int target_count;
+	int err = 0;
+	u8 bits, fan_config;
+	int sr;
+
+	mutex_lock(&data->update_lock);
+
+	switch (attr) {
+	case hwmon_fan_target:
+		val = clamp_val(val, FAN_RPM_MIN, FAN_RPM_MAX);
+		bits = bits_for_tach_period(val);
+		data->fan_dynamics[channel] =
+			((data->fan_dynamics[channel] &
+			  ~MAX31790_FAN_DYN_SR_MASK) |
+			 (bits << MAX31790_FAN_DYN_SR_SHIFT));
+		err = i2c_smbus_write_byte_data(client,
+					MAX31790_REG_FAN_DYNAMICS(channel),
+					data->fan_dynamics[channel]);
+		if (err < 0)
+			break;
+
+		sr = get_tach_period(data->fan_dynamics[channel]);
+		target_count = RPM_TO_REG(val, sr);
+		target_count = clamp_val(target_count, 0x1, 0x7FF);
+
+		data->target_count[channel] = target_count << 5;
+
+		err = i2c_smbus_write_word_swapped(client,
+					MAX31790_REG_TARGET_COUNT(channel),
+					data->target_count[channel]);
+		break;
+	case hwmon_fan_enable:
+		fan_config = data->fan_config[channel];
+		if (val == 0) {
+			fan_config &= ~MAX31790_FAN_CFG_TACH_INPUT_EN;
+		} else if (val == 1) {
+			fan_config |= MAX31790_FAN_CFG_TACH_INPUT_EN;
+		} else {
+			err = -EINVAL;
+			break;
+		}
+		if (fan_config != data->fan_config[channel]) {
+			err = i2c_smbus_write_byte_data(client, MAX31790_REG_FAN_CONFIG(channel),
+							fan_config);
+			if (!err)
+				data->fan_config[channel] = fan_config;
+		}
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return err;
+}
+
+static umode_t max31790_fan_is_visible(const void *_data, u32 attr, int channel)
+{
+	const struct max31790_data *data = _data;
+	u8 fan_config = data->fan_config[channel % NR_CHANNEL];
+
+	switch (attr) {
+	case hwmon_fan_input:
+	case hwmon_fan_fault:
+		if (channel < NR_CHANNEL ||
+		    (fan_config & MAX31790_FAN_CFG_TACH_INPUT))
+			return 0444;
+		return 0;
+	case hwmon_fan_target:
+		if (channel < NR_CHANNEL &&
+		    !(fan_config & MAX31790_FAN_CFG_TACH_INPUT))
+			return 0644;
+		return 0;
+	case hwmon_fan_enable:
+		if (channel < NR_CHANNEL)
+			return 0644;
+		return 0;
+	default:
+		return 0;
+	}
+}
+
+static int max31790_read_pwm(struct device *dev, u32 attr, int channel,
+			     long *val)
+{
+	struct max31790_data *data = max31790_update_device(dev);
+	u8 fan_config;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	fan_config = data->fan_config[channel];
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		*val = data->pwm[channel] >> 8;
+		return 0;
+	case hwmon_pwm_enable:
+		if (fan_config & MAX31790_FAN_CFG_CTRL_MON)
+			*val = 0;
+		else if (fan_config & MAX31790_FAN_CFG_RPM_MODE)
+			*val = 2;
+		else
+			*val = 1;
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int max31790_write_pwm(struct device *dev, u32 attr, int channel,
+			      long val)
+{
+	struct max31790_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	u8 fan_config;
+	int err = 0;
+
+	mutex_lock(&data->update_lock);
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		if (val < 0 || val > 255) {
+			err = -EINVAL;
+			break;
+		}
+		data->valid = false;
+		err = i2c_smbus_write_word_swapped(client,
+						   MAX31790_REG_PWMOUT(channel),
+						   val << 8);
+		break;
+	case hwmon_pwm_enable:
+		fan_config = data->fan_config[channel];
+		if (val == 0) {
+			fan_config |= MAX31790_FAN_CFG_CTRL_MON;
+			/*
+			 * Disable RPM mode; otherwise disabling fan speed
+			 * monitoring is not possible.
+			 */
+			fan_config &= ~MAX31790_FAN_CFG_RPM_MODE;
+		} else if (val == 1) {
+			fan_config &= ~(MAX31790_FAN_CFG_CTRL_MON | MAX31790_FAN_CFG_RPM_MODE);
+		} else if (val == 2) {
+			fan_config &= ~MAX31790_FAN_CFG_CTRL_MON;
+			/*
+			 * The chip sets MAX31790_FAN_CFG_TACH_INPUT_EN on its
+			 * own if MAX31790_FAN_CFG_RPM_MODE is set.
+			 * Do it here as well to reflect the actual register
+			 * value in the cache.
+			 */
+			fan_config |= (MAX31790_FAN_CFG_RPM_MODE | MAX31790_FAN_CFG_TACH_INPUT_EN);
+		} else {
+			err = -EINVAL;
+			break;
+		}
+		if (fan_config != data->fan_config[channel]) {
+			err = i2c_smbus_write_byte_data(client, MAX31790_REG_FAN_CONFIG(channel),
+							fan_config);
+			if (!err)
+				data->fan_config[channel] = fan_config;
+		}
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return err;
+}
+
+static umode_t max31790_pwm_is_visible(const void *_data, u32 attr, int channel)
+{
+	const struct max31790_data *data = _data;
+	u8 fan_config = data->fan_config[channel];
+
+	switch (attr) {
+	case hwmon_pwm_input:
+	case hwmon_pwm_enable:
+		if (!(fan_config & MAX31790_FAN_CFG_TACH_INPUT))
+			return 0644;
+		return 0;
+	default:
+		return 0;
+	}
+}
+
+static int max31790_read(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_fan:
+		return max31790_read_fan(dev, attr, channel, val);
+	case hwmon_pwm:
+		return max31790_read_pwm(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int max31790_write(struct device *dev, enum hwmon_sensor_types type,
+			  u32 attr, int channel, long val)
+{
+	switch (type) {
+	case hwmon_fan:
+		return max31790_write_fan(dev, attr, channel, val);
+	case hwmon_pwm:
+		return max31790_write_pwm(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t max31790_is_visible(const void *data,
+				   enum hwmon_sensor_types type,
+				   u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_fan:
+		return max31790_fan_is_visible(data, attr, channel);
+	case hwmon_pwm:
+		return max31790_pwm_is_visible(data, attr, channel);
+	default:
+		return 0;
+	}
+}
+
+static const struct hwmon_channel_info *max31790_info[] = {
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+			   HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+			   HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+			   HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+			   HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+			   HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+			   HWMON_F_INPUT | HWMON_F_FAULT,
+			   HWMON_F_INPUT | HWMON_F_FAULT,
+			   HWMON_F_INPUT | HWMON_F_FAULT,
+			   HWMON_F_INPUT | HWMON_F_FAULT,
+			   HWMON_F_INPUT | HWMON_F_FAULT,
+			   HWMON_F_INPUT | HWMON_F_FAULT),
+	HWMON_CHANNEL_INFO(pwm,
+			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
+	NULL
+};
+
+static const struct hwmon_ops max31790_hwmon_ops = {
+	.is_visible = max31790_is_visible,
+	.read = max31790_read,
+	.write = max31790_write,
+};
+
+static const struct hwmon_chip_info max31790_chip_info = {
+	.ops = &max31790_hwmon_ops,
+	.info = max31790_info,
+};
+
+static int max31790_init_client(struct i2c_client *client,
+				struct max31790_data *data)
+{
+	int i, rv;
+
+	for (i = 0; i < NR_CHANNEL; i++) {
+		rv = i2c_smbus_read_byte_data(client,
+				MAX31790_REG_FAN_CONFIG(i));
+		if (rv < 0)
+			return rv;
+		data->fan_config[i] = rv;
+
+		rv = i2c_smbus_read_byte_data(client,
+				MAX31790_REG_FAN_DYNAMICS(i));
+		if (rv < 0)
+			return rv;
+		data->fan_dynamics[i] = rv;
+	}
+
+	return 0;
+}
+
+static int max31790_probe(struct i2c_client *client)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	struct max31790_data *data;
+	struct device *hwmon_dev;
+	int err;
+
+	if (!i2c_check_functionality(adapter,
+			I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(struct max31790_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	mutex_init(&data->update_lock);
+
+	/*
+	 * Initialize the max31790 chip
+	 */
+	err = max31790_init_client(client, data);
+	if (err)
+		return err;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+							 data,
+							 &max31790_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id max31790_id[] = {
+	{ "max31790", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max31790_id);
+
+static struct i2c_driver max31790_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.probe_new	= max31790_probe,
+	.driver = {
+		.name	= "max31790",
+	},
+	.id_table	= max31790_id,
+};
+
+module_i2c_driver(max31790_driver);
+
+MODULE_AUTHOR("Il Han <corone.il.han@gmail.com>");
+MODULE_DESCRIPTION("MAX31790 sensor driver");
+MODULE_LICENSE("GPL");