Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 231 insertions, 0 deletions

diff --git a/drivers/hwmon/menf21bmc_hwmon.c b/drivers/hwmon/menf21bmc_hwmon.c
new file mode 100644
index 000000000..adb50115c
--- /dev/null
+++ b/drivers/hwmon/menf21bmc_hwmon.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  MEN 14F021P00 Board Management Controller (BMC) hwmon driver.
+ *
+ *  This is the core hwmon driver of the MEN 14F021P00 BMC.
+ *  The BMC monitors the board voltages which can be access with this
+ *  driver through sysfs.
+ *
+ *  Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+
+#define DRV_NAME  "menf21bmc_hwmon"
+
+#define BMC_VOLT_COUNT	5
+#define MENF21BMC_V33	0
+#define MENF21BMC_V5	1
+#define MENF21BMC_V12	2
+#define MENF21BMC_V5_SB	3
+#define MENF21BMC_VBAT	4
+
+#define IDX_TO_VOLT_MIN_CMD(idx) (0x40 + idx)
+#define IDX_TO_VOLT_MAX_CMD(idx) (0x50 + idx)
+#define IDX_TO_VOLT_INP_CMD(idx) (0x60 + idx)
+
+struct menf21bmc_hwmon {
+	bool valid;
+	struct i2c_client *i2c_client;
+	unsigned long last_update;
+	int in_val[BMC_VOLT_COUNT];
+	int in_min[BMC_VOLT_COUNT];
+	int in_max[BMC_VOLT_COUNT];
+};
+
+static const char *const input_names[] = {
+	[MENF21BMC_V33]		= "MON_3_3V",
+	[MENF21BMC_V5]		= "MON_5V",
+	[MENF21BMC_V12]		= "MON_12V",
+	[MENF21BMC_V5_SB]	= "5V_STANDBY",
+	[MENF21BMC_VBAT]	= "VBAT"
+};
+
+static struct menf21bmc_hwmon *menf21bmc_hwmon_update(struct device *dev)
+{
+	int i;
+	int val;
+	struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev);
+	struct menf21bmc_hwmon *data_ret = drv_data;
+
+	if (time_after(jiffies, drv_data->last_update + HZ)
+	    || !drv_data->valid) {
+		for (i = 0; i < BMC_VOLT_COUNT; i++) {
+			val = i2c_smbus_read_word_data(drv_data->i2c_client,
+						       IDX_TO_VOLT_INP_CMD(i));
+			if (val < 0) {
+				data_ret = ERR_PTR(val);
+				goto abort;
+			}
+			drv_data->in_val[i] = val;
+		}
+		drv_data->last_update = jiffies;
+		drv_data->valid = true;
+	}
+abort:
+	return data_ret;
+}
+
+static int menf21bmc_hwmon_get_volt_limits(struct menf21bmc_hwmon *drv_data)
+{
+	int i, val;
+
+	for (i = 0; i < BMC_VOLT_COUNT; i++) {
+		val = i2c_smbus_read_word_data(drv_data->i2c_client,
+					       IDX_TO_VOLT_MIN_CMD(i));
+		if (val < 0)
+			return val;
+
+		drv_data->in_min[i] = val;
+
+		val = i2c_smbus_read_word_data(drv_data->i2c_client,
+					       IDX_TO_VOLT_MAX_CMD(i));
+		if (val < 0)
+			return val;
+
+		drv_data->in_max[i] = val;
+	}
+	return 0;
+}
+
+static ssize_t
+label_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return sprintf(buf, "%s\n", input_names[attr->index]);
+}
+
+static ssize_t
+in_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct menf21bmc_hwmon *drv_data = menf21bmc_hwmon_update(dev);
+
+	if (IS_ERR(drv_data))
+		return PTR_ERR(drv_data);
+
+	return sprintf(buf, "%d\n", drv_data->in_val[attr->index]);
+}
+
+static ssize_t
+min_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", drv_data->in_min[attr->index]);
+}
+
+static ssize_t
+max_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", drv_data->in_max[attr->index]);
+}
+
+static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0);
+static SENSOR_DEVICE_ATTR_RO(in0_min, min, 0);
+static SENSOR_DEVICE_ATTR_RO(in0_max, max, 0);
+static SENSOR_DEVICE_ATTR_RO(in0_label, label, 0);
+static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1);
+static SENSOR_DEVICE_ATTR_RO(in1_min, min, 1);
+static SENSOR_DEVICE_ATTR_RO(in1_max, max, 1);
+static SENSOR_DEVICE_ATTR_RO(in1_label, label, 1);
+static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2);
+static SENSOR_DEVICE_ATTR_RO(in2_min, min, 2);
+static SENSOR_DEVICE_ATTR_RO(in2_max, max, 2);
+static SENSOR_DEVICE_ATTR_RO(in2_label, label, 2);
+static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3);
+static SENSOR_DEVICE_ATTR_RO(in3_min, min, 3);
+static SENSOR_DEVICE_ATTR_RO(in3_max, max, 3);
+static SENSOR_DEVICE_ATTR_RO(in3_label, label, 3);
+static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4);
+static SENSOR_DEVICE_ATTR_RO(in4_min, min, 4);
+static SENSOR_DEVICE_ATTR_RO(in4_max, max, 4);
+static SENSOR_DEVICE_ATTR_RO(in4_label, label, 4);
+
+static struct attribute *menf21bmc_hwmon_attrs[] = {
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_label.dev_attr.attr,
+
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_label.dev_attr.attr,
+
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_label.dev_attr.attr,
+
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_label.dev_attr.attr,
+
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_label.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(menf21bmc_hwmon);
+
+static int menf21bmc_hwmon_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct menf21bmc_hwmon *drv_data;
+	struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent);
+	struct device *hwmon_dev;
+
+	drv_data = devm_kzalloc(&pdev->dev, sizeof(struct menf21bmc_hwmon),
+				GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	drv_data->i2c_client = i2c_client;
+
+	ret = menf21bmc_hwmon_get_volt_limits(drv_data);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to read sensor limits");
+		return ret;
+	}
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
+						   "menf21bmc", drv_data,
+						   menf21bmc_hwmon_groups);
+	if (IS_ERR(hwmon_dev))
+		return PTR_ERR(hwmon_dev);
+
+	dev_info(&pdev->dev, "MEN 14F021P00 BMC hwmon device enabled");
+
+	return 0;
+}
+
+static struct platform_driver menf21bmc_hwmon = {
+	.probe		= menf21bmc_hwmon_probe,
+	.driver		= {
+		.name		= DRV_NAME,
+	},
+};
+
+module_platform_driver(menf21bmc_hwmon);
+
+MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
+MODULE_DESCRIPTION("MEN 14F021P00 BMC hwmon");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:menf21bmc_hwmon");