Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 769 insertions, 0 deletions

diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c
new file mode 100644
index 000000000..51986adfb
--- /dev/null
+++ b/drivers/hwmon/pmbus/mp2975.c
@@ -0,0 +1,769 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers
+ *
+ * Copyright (C) 2020 Nvidia Technologies Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+/* Vendor specific registers. */
+#define MP2975_MFR_APS_HYS_R2		0x0d
+#define MP2975_MFR_SLOPE_TRIM3		0x1d
+#define MP2975_MFR_VR_MULTI_CONFIG_R1	0x0d
+#define MP2975_MFR_VR_MULTI_CONFIG_R2	0x1d
+#define MP2975_MFR_APS_DECAY_ADV	0x56
+#define MP2975_MFR_DC_LOOP_CTRL		0x59
+#define MP2975_MFR_OCP_UCP_PHASE_SET	0x65
+#define MP2975_MFR_VR_CONFIG1		0x68
+#define MP2975_MFR_READ_CS1_2		0x82
+#define MP2975_MFR_READ_CS3_4		0x83
+#define MP2975_MFR_READ_CS5_6		0x84
+#define MP2975_MFR_READ_CS7_8		0x85
+#define MP2975_MFR_READ_CS9_10		0x86
+#define MP2975_MFR_READ_CS11_12		0x87
+#define MP2975_MFR_READ_IOUT_PK		0x90
+#define MP2975_MFR_READ_POUT_PK		0x91
+#define MP2975_MFR_READ_VREF_R1		0xa1
+#define MP2975_MFR_READ_VREF_R2		0xa3
+#define MP2975_MFR_OVP_TH_SET		0xe5
+#define MP2975_MFR_UVP_SET		0xe6
+
+#define MP2975_VOUT_FORMAT		BIT(15)
+#define MP2975_VID_STEP_SEL_R1		BIT(4)
+#define MP2975_IMVP9_EN_R1		BIT(13)
+#define MP2975_VID_STEP_SEL_R2		BIT(3)
+#define MP2975_IMVP9_EN_R2		BIT(12)
+#define MP2975_PRT_THRES_DIV_OV_EN	BIT(14)
+#define MP2975_DRMOS_KCS		GENMASK(13, 12)
+#define MP2975_PROT_DEV_OV_OFF		10
+#define MP2975_PROT_DEV_OV_ON		5
+#define MP2975_SENSE_AMPL		BIT(11)
+#define MP2975_SENSE_AMPL_UNIT		1
+#define MP2975_SENSE_AMPL_HALF		2
+#define MP2975_VIN_UV_LIMIT_UNIT	8
+
+#define MP2975_MAX_PHASE_RAIL1	8
+#define MP2975_MAX_PHASE_RAIL2	4
+#define MP2975_PAGE_NUM		2
+
+#define MP2975_RAIL2_FUNC	(PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
+				 PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
+				 PMBUS_HAVE_POUT | PMBUS_PHASE_VIRTUAL)
+
+struct mp2975_data {
+	struct pmbus_driver_info info;
+	int vout_scale;
+	int vid_step[MP2975_PAGE_NUM];
+	int vref[MP2975_PAGE_NUM];
+	int vref_off[MP2975_PAGE_NUM];
+	int vout_max[MP2975_PAGE_NUM];
+	int vout_ov_fixed[MP2975_PAGE_NUM];
+	int vout_format[MP2975_PAGE_NUM];
+	int curr_sense_gain[MP2975_PAGE_NUM];
+};
+
+#define to_mp2975_data(x)  container_of(x, struct mp2975_data, info)
+
+static int mp2975_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		/*
+		 * Enforce VOUT direct format, since device allows to set the
+		 * different formats for the different rails. Conversion from
+		 * VID to direct provided by driver internally, in case it is
+		 * necessary.
+		 */
+		return PB_VOUT_MODE_DIRECT;
+	default:
+		return -ENODATA;
+	}
+}
+
+static int
+mp2975_read_word_helper(struct i2c_client *client, int page, int phase, u8 reg,
+			u16 mask)
+{
+	int ret = pmbus_read_word_data(client, page, phase, reg);
+
+	return (ret > 0) ? ret & mask : ret;
+}
+
+static int
+mp2975_vid2direct(int vrf, int val)
+{
+	switch (vrf) {
+	case vr12:
+		if (val >= 0x01)
+			return 250 + (val - 1) * 5;
+		break;
+	case vr13:
+		if (val >= 0x01)
+			return 500 + (val - 1) * 10;
+		break;
+	case imvp9:
+		if (val >= 0x01)
+			return 200 + (val - 1) * 10;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int
+mp2975_read_phase(struct i2c_client *client, struct mp2975_data *data,
+		  int page, int phase, u8 reg)
+{
+	int ph_curr, ret;
+
+	ret = pmbus_read_word_data(client, page, phase, reg);
+	if (ret < 0)
+		return ret;
+
+	if (!((phase + 1) % MP2975_PAGE_NUM))
+		ret >>= 8;
+	ret &= 0xff;
+
+	/*
+	 * Output value is calculated as: (READ_CSx / 80 – 1.23) / (Kcs * Rcs)
+	 * where:
+	 * - Kcs is the DrMOS current sense gain of power stage, which is
+	 *   obtained from the register MP2975_MFR_VR_CONFIG1, bits 13-12 with
+	 *   the following selection of DrMOS (data->curr_sense_gain[page]):
+	 *   00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A.
+	 * - Rcs is the internal phase current sense resistor which is constant
+	 *   value 1kΩ.
+	 */
+	ph_curr = ret * 100 - 9800;
+
+	/*
+	 * Current phase sensing, providing by the device is not accurate
+	 * for the light load. This because sampling of current occurrence of
+	 * bit weight has a big deviation for light load. For handling such
+	 * case phase current is represented as the maximum between the value
+	 * calculated  above and total rail current divided by number phases.
+	 */
+	ret = pmbus_read_word_data(client, page, phase, PMBUS_READ_IOUT);
+	if (ret < 0)
+		return ret;
+
+	return max_t(int, DIV_ROUND_CLOSEST(ret, data->info.phases[page]),
+		     DIV_ROUND_CLOSEST(ph_curr, data->curr_sense_gain[page]));
+}
+
+static int
+mp2975_read_phases(struct i2c_client *client, struct mp2975_data *data,
+		   int page, int phase)
+{
+	int ret;
+
+	if (page) {
+		switch (phase) {
+		case 0 ... 1:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS7_8);
+			break;
+		case 2 ... 3:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS9_10);
+			break;
+		case 4 ... 5:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS11_12);
+			break;
+		default:
+			return -ENODATA;
+		}
+	} else {
+		switch (phase) {
+		case 0 ... 1:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS1_2);
+			break;
+		case 2 ... 3:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS3_4);
+			break;
+		case 4 ... 5:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS5_6);
+			break;
+		case 6 ... 7:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS7_8);
+			break;
+		case 8 ... 9:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS9_10);
+			break;
+		case 10 ... 11:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS11_12);
+			break;
+		default:
+			return -ENODATA;
+		}
+	}
+	return ret;
+}
+
+static int mp2975_read_word_data(struct i2c_client *client, int page,
+				 int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct mp2975_data *data = to_mp2975_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_OT_FAULT_LIMIT:
+		ret = mp2975_read_word_helper(client, page, phase, reg,
+					      GENMASK(7, 0));
+		break;
+	case PMBUS_VIN_OV_FAULT_LIMIT:
+		ret = mp2975_read_word_helper(client, page, phase, reg,
+					      GENMASK(7, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = DIV_ROUND_CLOSEST(ret, MP2975_VIN_UV_LIMIT_UNIT);
+		break;
+	case PMBUS_VOUT_OV_FAULT_LIMIT:
+		/*
+		 * Register provides two values for over-voltage protection
+		 * threshold for fixed (ovp2) and tracking (ovp1) modes. The
+		 * minimum of these two values is provided as over-voltage
+		 * fault alarm.
+		 */
+		ret = mp2975_read_word_helper(client, page, phase,
+					      MP2975_MFR_OVP_TH_SET,
+					      GENMASK(2, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = min_t(int, data->vout_max[page] + 50 * (ret + 1),
+			    data->vout_ov_fixed[page]);
+		break;
+	case PMBUS_VOUT_UV_FAULT_LIMIT:
+		ret = mp2975_read_word_helper(client, page, phase,
+					      MP2975_MFR_UVP_SET,
+					      GENMASK(2, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = DIV_ROUND_CLOSEST(data->vref[page] * 10 - 50 *
+					(ret + 1) * data->vout_scale, 10);
+		break;
+	case PMBUS_READ_VOUT:
+		ret = mp2975_read_word_helper(client, page, phase, reg,
+					      GENMASK(11, 0));
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * READ_VOUT can be provided in VID or direct format. The
+		 * format type is specified by bit 15 of the register
+		 * MP2975_MFR_DC_LOOP_CTRL. The driver enforces VOUT direct
+		 * format, since device allows to set the different formats for
+		 * the different rails and also all VOUT limits registers are
+		 * provided in a direct format. In case format is VID - convert
+		 * to direct.
+		 */
+		if (data->vout_format[page] == vid)
+			ret = mp2975_vid2direct(info->vrm_version[page], ret);
+		break;
+	case PMBUS_VIRT_READ_POUT_MAX:
+		ret = mp2975_read_word_helper(client, page, phase,
+					      MP2975_MFR_READ_POUT_PK,
+					      GENMASK(12, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = DIV_ROUND_CLOSEST(ret, 4);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = mp2975_read_word_helper(client, page, phase,
+					      MP2975_MFR_READ_IOUT_PK,
+					      GENMASK(12, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = DIV_ROUND_CLOSEST(ret, 4);
+		break;
+	case PMBUS_READ_IOUT:
+		ret = mp2975_read_phases(client, data, page, phase);
+		if (ret < 0)
+			return ret;
+
+		break;
+	case PMBUS_UT_WARN_LIMIT:
+	case PMBUS_UT_FAULT_LIMIT:
+	case PMBUS_VIN_UV_WARN_LIMIT:
+	case PMBUS_VIN_UV_FAULT_LIMIT:
+	case PMBUS_VOUT_UV_WARN_LIMIT:
+	case PMBUS_VOUT_OV_WARN_LIMIT:
+	case PMBUS_VIN_OV_WARN_LIMIT:
+	case PMBUS_IIN_OC_FAULT_LIMIT:
+	case PMBUS_IOUT_OC_LV_FAULT_LIMIT:
+	case PMBUS_IIN_OC_WARN_LIMIT:
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+	case PMBUS_IOUT_UC_FAULT_LIMIT:
+	case PMBUS_POUT_OP_FAULT_LIMIT:
+	case PMBUS_POUT_OP_WARN_LIMIT:
+	case PMBUS_PIN_OP_WARN_LIMIT:
+		return -ENXIO;
+	default:
+		return -ENODATA;
+	}
+
+	return ret;
+}
+
+static int mp2975_identify_multiphase_rail2(struct i2c_client *client)
+{
+	int ret;
+
+	/*
+	 * Identify multiphase for rail 2 - could be from 0 to 4.
+	 * In case phase number is zero – only page zero is supported
+	 */
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
+	if (ret < 0)
+		return ret;
+
+	/* Identify multiphase for rail 2 - could be from 0 to 4. */
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R2);
+	if (ret < 0)
+		return ret;
+
+	ret &= GENMASK(2, 0);
+	return (ret >= 4) ? 4 : ret;
+}
+
+static void mp2975_set_phase_rail1(struct pmbus_driver_info *info)
+{
+	int i;
+
+	for (i = 0 ; i < info->phases[0]; i++)
+		info->pfunc[i] = PMBUS_HAVE_IOUT;
+}
+
+static void
+mp2975_set_phase_rail2(struct pmbus_driver_info *info, int num_phases)
+{
+	int i;
+
+	/* Set phases for rail 2 from upper to lower. */
+	for (i = 1; i <= num_phases; i++)
+		info->pfunc[MP2975_MAX_PHASE_RAIL1 - i] = PMBUS_HAVE_IOUT;
+}
+
+static int
+mp2975_identify_multiphase(struct i2c_client *client, struct mp2975_data *data,
+			   struct pmbus_driver_info *info)
+{
+	int num_phases2, ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
+	if (ret < 0)
+		return ret;
+
+	/* Identify multiphase for rail 1 - could be from 1 to 8. */
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R1);
+	if (ret <= 0)
+		return ret;
+
+	info->phases[0] = ret & GENMASK(3, 0);
+
+	/*
+	 * The device provides a total of 8 PWM pins, and can be configured
+	 * to different phase count applications for rail 1 and rail 2.
+	 * Rail 1 can be set to 8 phases, while rail 2 can only be set to 4
+	 * phases at most. When rail 1’s phase count is configured as 0, rail
+	 * 1 operates with 1-phase DCM. When rail 2 phase count is configured
+	 * as 0, rail 2 is disabled.
+	 */
+	if (info->phases[0] > MP2975_MAX_PHASE_RAIL1)
+		return -EINVAL;
+
+	mp2975_set_phase_rail1(info);
+	num_phases2 = min(MP2975_MAX_PHASE_RAIL1 - info->phases[0],
+			  MP2975_MAX_PHASE_RAIL2);
+	if (info->phases[1] && info->phases[1] <= num_phases2)
+		mp2975_set_phase_rail2(info, num_phases2);
+
+	return 0;
+}
+
+static int
+mp2975_identify_vid(struct i2c_client *client, struct mp2975_data *data,
+		    struct pmbus_driver_info *info, u32 reg, int page,
+		    u32 imvp_bit, u32 vr_bit)
+{
+	int ret;
+
+	/* Identify VID mode and step selection. */
+	ret = i2c_smbus_read_word_data(client, reg);
+	if (ret < 0)
+		return ret;
+
+	if (ret & imvp_bit) {
+		info->vrm_version[page] = imvp9;
+		data->vid_step[page] = MP2975_PROT_DEV_OV_OFF;
+	} else if (ret & vr_bit) {
+		info->vrm_version[page] = vr12;
+		data->vid_step[page] = MP2975_PROT_DEV_OV_ON;
+	} else {
+		info->vrm_version[page] = vr13;
+		data->vid_step[page] = MP2975_PROT_DEV_OV_OFF;
+	}
+
+	return 0;
+}
+
+static int
+mp2975_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data,
+			  struct pmbus_driver_info *info)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
+	if (ret < 0)
+		return ret;
+
+	/* Identify VID mode for rail 1. */
+	ret = mp2975_identify_vid(client, data, info,
+				  MP2975_MFR_VR_MULTI_CONFIG_R1, 0,
+				  MP2975_IMVP9_EN_R1, MP2975_VID_STEP_SEL_R1);
+	if (ret < 0)
+		return ret;
+
+	/* Identify VID mode for rail 2, if connected. */
+	if (info->phases[1])
+		ret = mp2975_identify_vid(client, data, info,
+					  MP2975_MFR_VR_MULTI_CONFIG_R2, 1,
+					  MP2975_IMVP9_EN_R2,
+					  MP2975_VID_STEP_SEL_R2);
+	return ret;
+}
+
+static int
+mp2975_current_sense_gain_get(struct i2c_client *client,
+			      struct mp2975_data *data)
+{
+	int i, ret;
+
+	/*
+	 * Obtain DrMOS current sense gain of power stage from the register
+	 * MP2975_MFR_VR_CONFIG1, bits 13-12. The value is selected as below:
+	 * 00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A. Other
+	 * values are invalid.
+	 */
+	for (i = 0 ; i < data->info.pages; i++) {
+		ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+		if (ret < 0)
+			return ret;
+		ret = i2c_smbus_read_word_data(client,
+					       MP2975_MFR_VR_CONFIG1);
+		if (ret < 0)
+			return ret;
+
+		switch ((ret & MP2975_DRMOS_KCS) >> 12) {
+		case 0:
+			data->curr_sense_gain[i] = 50;
+			break;
+		case 1:
+			data->curr_sense_gain[i] = 85;
+			break;
+		case 2:
+			data->curr_sense_gain[i] = 97;
+			break;
+		default:
+			data->curr_sense_gain[i] = 100;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int
+mp2975_vref_get(struct i2c_client *client, struct mp2975_data *data,
+		struct pmbus_driver_info *info)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 3);
+	if (ret < 0)
+		return ret;
+
+	/* Get voltage reference value for rail 1. */
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_READ_VREF_R1);
+	if (ret < 0)
+		return ret;
+
+	data->vref[0] = ret * data->vid_step[0];
+
+	/* Get voltage reference value for rail 2, if connected. */
+	if (data->info.pages == MP2975_PAGE_NUM) {
+		ret = i2c_smbus_read_word_data(client, MP2975_MFR_READ_VREF_R2);
+		if (ret < 0)
+			return ret;
+
+		data->vref[1] = ret * data->vid_step[1];
+	}
+	return 0;
+}
+
+static int
+mp2975_vref_offset_get(struct i2c_client *client, struct mp2975_data *data,
+		       int page)
+{
+	int ret;
+
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_OVP_TH_SET);
+	if (ret < 0)
+		return ret;
+
+	switch ((ret & GENMASK(5, 3)) >> 3) {
+	case 1:
+		data->vref_off[page] = 140;
+		break;
+	case 2:
+		data->vref_off[page] = 220;
+		break;
+	case 4:
+		data->vref_off[page] = 400;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int
+mp2975_vout_max_get(struct i2c_client *client, struct mp2975_data *data,
+		    struct pmbus_driver_info *info, int page)
+{
+	int ret;
+
+	/* Get maximum reference voltage of VID-DAC in VID format. */
+	ret = i2c_smbus_read_word_data(client, PMBUS_VOUT_MAX);
+	if (ret < 0)
+		return ret;
+
+	data->vout_max[page] = mp2975_vid2direct(info->vrm_version[page], ret &
+						 GENMASK(8, 0));
+	return 0;
+}
+
+static int
+mp2975_identify_vout_format(struct i2c_client *client,
+			    struct mp2975_data *data, int page)
+{
+	int ret;
+
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_DC_LOOP_CTRL);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MP2975_VOUT_FORMAT)
+		data->vout_format[page] = vid;
+	else
+		data->vout_format[page] = direct;
+	return 0;
+}
+
+static int
+mp2975_vout_ov_scale_get(struct i2c_client *client, struct mp2975_data *data,
+			 struct pmbus_driver_info *info)
+{
+	int thres_dev, sense_ampl, ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Get divider for over- and under-voltage protection thresholds
+	 * configuration from the Advanced Options of Auto Phase Shedding and
+	 * decay register.
+	 */
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_APS_DECAY_ADV);
+	if (ret < 0)
+		return ret;
+	thres_dev = ret & MP2975_PRT_THRES_DIV_OV_EN ? MP2975_PROT_DEV_OV_ON :
+	                                               MP2975_PROT_DEV_OV_OFF;
+
+	/* Select the gain of remote sense amplifier. */
+	ret = i2c_smbus_read_word_data(client, PMBUS_VOUT_SCALE_LOOP);
+	if (ret < 0)
+		return ret;
+	sense_ampl = ret & MP2975_SENSE_AMPL ? MP2975_SENSE_AMPL_HALF :
+					       MP2975_SENSE_AMPL_UNIT;
+
+	data->vout_scale = sense_ampl * thres_dev;
+
+	return 0;
+}
+
+static int
+mp2975_vout_per_rail_config_get(struct i2c_client *client,
+				struct mp2975_data *data,
+				struct pmbus_driver_info *info)
+{
+	int i, ret;
+
+	for (i = 0; i < data->info.pages; i++) {
+		ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+		if (ret < 0)
+			return ret;
+
+		/* Obtain voltage reference offsets. */
+		ret = mp2975_vref_offset_get(client, data, i);
+		if (ret < 0)
+			return ret;
+
+		/* Obtain maximum voltage values. */
+		ret = mp2975_vout_max_get(client, data, info, i);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * Get VOUT format for READ_VOUT command : VID or direct.
+		 * Pages on same device can be configured with different
+		 * formats.
+		 */
+		ret = mp2975_identify_vout_format(client, data, i);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * Set over-voltage fixed value. Thresholds are provided as
+		 * fixed value, and tracking value. The minimum of them are
+		 * exposed as over-voltage critical threshold.
+		 */
+		data->vout_ov_fixed[i] = data->vref[i] +
+					 DIV_ROUND_CLOSEST(data->vref_off[i] *
+							   data->vout_scale,
+							   10);
+	}
+
+	return 0;
+}
+
+static struct pmbus_driver_info mp2975_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_POWER] = direct,
+	.m[PSC_TEMPERATURE] = 1,
+	.m[PSC_VOLTAGE_OUT] = 1,
+	.R[PSC_VOLTAGE_OUT] = 3,
+	.m[PSC_CURRENT_OUT] = 1,
+	.m[PSC_POWER] = 1,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT |
+		PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | PMBUS_PHASE_VIRTUAL,
+	.read_byte_data = mp2975_read_byte_data,
+	.read_word_data = mp2975_read_word_data,
+};
+
+static int mp2975_probe(struct i2c_client *client)
+{
+	struct pmbus_driver_info *info;
+	struct mp2975_data *data;
+	int ret;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct mp2975_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	memcpy(&data->info, &mp2975_info, sizeof(*info));
+	info = &data->info;
+
+	/* Identify multiphase configuration for rail 2. */
+	ret = mp2975_identify_multiphase_rail2(client);
+	if (ret < 0)
+		return ret;
+
+	if (ret) {
+		/* Two rails are connected. */
+		data->info.pages = MP2975_PAGE_NUM;
+		data->info.phases[1] = ret;
+		data->info.func[1] = MP2975_RAIL2_FUNC;
+	}
+
+	/* Identify multiphase configuration. */
+	ret = mp2975_identify_multiphase(client, data, info);
+	if (ret)
+		return ret;
+
+	/* Identify VID setting per rail. */
+	ret = mp2975_identify_rails_vid(client, data, info);
+	if (ret < 0)
+		return ret;
+
+	/* Obtain current sense gain of power stage. */
+	ret = mp2975_current_sense_gain_get(client, data);
+	if (ret)
+		return ret;
+
+	/* Obtain voltage reference values. */
+	ret = mp2975_vref_get(client, data, info);
+	if (ret)
+		return ret;
+
+	/* Obtain vout over-voltage scales. */
+	ret = mp2975_vout_ov_scale_get(client, data, info);
+	if (ret < 0)
+		return ret;
+
+	/* Obtain offsets, maximum and format for vout. */
+	ret = mp2975_vout_per_rail_config_get(client, data, info);
+	if (ret)
+		return ret;
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id mp2975_id[] = {
+	{"mp2975", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, mp2975_id);
+
+static const struct of_device_id __maybe_unused mp2975_of_match[] = {
+	{.compatible = "mps,mp2975"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mp2975_of_match);
+
+static struct i2c_driver mp2975_driver = {
+	.driver = {
+		.name = "mp2975",
+		.of_match_table = of_match_ptr(mp2975_of_match),
+	},
+	.probe_new = mp2975_probe,
+	.id_table = mp2975_id,
+};
+
+module_i2c_driver(mp2975_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@nvidia.com>");
+MODULE_DESCRIPTION("PMBus driver for MPS MP2975 device");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);