Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 451 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
new file mode 100644
index 000000000..f2e537b13
--- /dev/null
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * I2C driver for the Renesas EMEV2 SoC
+ *
+ * Copyright (C) 2015 Wolfram Sang <wsa@sang-engineering.com>
+ * Copyright 2013 Codethink Ltd.
+ * Copyright 2010-2015 Renesas Electronics Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+/* I2C Registers */
+#define I2C_OFS_IICACT0		0x00	/* start */
+#define I2C_OFS_IIC0		0x04	/* shift */
+#define I2C_OFS_IICC0		0x08	/* control */
+#define I2C_OFS_SVA0		0x0c	/* slave address */
+#define I2C_OFS_IICCL0		0x10	/* clock select */
+#define I2C_OFS_IICX0		0x14	/* extension */
+#define I2C_OFS_IICS0		0x18	/* status */
+#define I2C_OFS_IICSE0		0x1c	/* status For emulation */
+#define I2C_OFS_IICF0		0x20	/* IIC flag */
+
+/* I2C IICACT0 Masks */
+#define I2C_BIT_IICE0		0x0001
+
+/* I2C IICC0 Masks */
+#define I2C_BIT_LREL0		0x0040
+#define I2C_BIT_WREL0		0x0020
+#define I2C_BIT_SPIE0		0x0010
+#define I2C_BIT_WTIM0		0x0008
+#define I2C_BIT_ACKE0		0x0004
+#define I2C_BIT_STT0		0x0002
+#define I2C_BIT_SPT0		0x0001
+
+/* I2C IICCL0 Masks */
+#define I2C_BIT_SMC0		0x0008
+#define I2C_BIT_DFC0		0x0004
+
+/* I2C IICSE0 Masks */
+#define I2C_BIT_MSTS0		0x0080
+#define I2C_BIT_ALD0		0x0040
+#define I2C_BIT_EXC0		0x0020
+#define I2C_BIT_COI0		0x0010
+#define I2C_BIT_TRC0		0x0008
+#define I2C_BIT_ACKD0		0x0004
+#define I2C_BIT_STD0		0x0002
+#define I2C_BIT_SPD0		0x0001
+
+/* I2C IICF0 Masks */
+#define I2C_BIT_STCF		0x0080
+#define I2C_BIT_IICBSY		0x0040
+#define I2C_BIT_STCEN		0x0002
+#define I2C_BIT_IICRSV		0x0001
+
+struct em_i2c_device {
+	void __iomem *base;
+	struct i2c_adapter adap;
+	struct completion msg_done;
+	struct clk *sclk;
+	struct i2c_client *slave;
+	int irq;
+};
+
+static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg)
+{
+	writeb((readb(priv->base + reg) & ~clear) | set, priv->base + reg);
+}
+
+static int em_i2c_wait_for_event(struct em_i2c_device *priv)
+{
+	unsigned long time_left;
+	int status;
+
+	reinit_completion(&priv->msg_done);
+
+	time_left = wait_for_completion_timeout(&priv->msg_done, priv->adap.timeout);
+
+	if (!time_left)
+		return -ETIMEDOUT;
+
+	status = readb(priv->base + I2C_OFS_IICSE0);
+	return status & I2C_BIT_ALD0 ? -EAGAIN : status;
+}
+
+static void em_i2c_stop(struct em_i2c_device *priv)
+{
+	/* Send Stop condition */
+	em_clear_set_bit(priv, 0, I2C_BIT_SPT0 | I2C_BIT_SPIE0, I2C_OFS_IICC0);
+
+	/* Wait for stop condition */
+	em_i2c_wait_for_event(priv);
+}
+
+static void em_i2c_reset(struct i2c_adapter *adap)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(adap);
+	int retr;
+
+	/* If I2C active */
+	if (readb(priv->base + I2C_OFS_IICACT0) & I2C_BIT_IICE0) {
+		/* Disable I2C operation */
+		writeb(0, priv->base + I2C_OFS_IICACT0);
+
+		retr = 1000;
+		while (readb(priv->base + I2C_OFS_IICACT0) == 1 && retr)
+			retr--;
+		WARN_ON(retr == 0);
+	}
+
+	/* Transfer mode set */
+	writeb(I2C_BIT_DFC0, priv->base + I2C_OFS_IICCL0);
+
+	/* Can Issue start without detecting a stop, Reservation disabled. */
+	writeb(I2C_BIT_STCEN | I2C_BIT_IICRSV, priv->base + I2C_OFS_IICF0);
+
+	/* I2C enable, 9 bit interrupt mode */
+	writeb(I2C_BIT_WTIM0, priv->base + I2C_OFS_IICC0);
+
+	/* Enable I2C operation */
+	writeb(I2C_BIT_IICE0, priv->base + I2C_OFS_IICACT0);
+
+	retr = 1000;
+	while (readb(priv->base + I2C_OFS_IICACT0) == 0 && retr)
+		retr--;
+	WARN_ON(retr == 0);
+}
+
+static int __em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+				int stop)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(adap);
+	int count, status, read = !!(msg->flags & I2C_M_RD);
+
+	/* Send start condition */
+	em_clear_set_bit(priv, 0, I2C_BIT_ACKE0 | I2C_BIT_WTIM0, I2C_OFS_IICC0);
+	em_clear_set_bit(priv, 0, I2C_BIT_STT0, I2C_OFS_IICC0);
+
+	/* Send slave address and R/W type */
+	writeb(i2c_8bit_addr_from_msg(msg), priv->base + I2C_OFS_IIC0);
+
+	/* Wait for transaction */
+	status = em_i2c_wait_for_event(priv);
+	if (status < 0)
+		goto out_reset;
+
+	/* Received NACK (result of setting slave address and R/W) */
+	if (!(status & I2C_BIT_ACKD0)) {
+		em_i2c_stop(priv);
+		goto out;
+	}
+
+	/* Extra setup for read transactions */
+	if (read) {
+		/* 8 bit interrupt mode */
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0, I2C_OFS_IICC0);
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0, I2C_OFS_IICC0);
+
+		/* Wait for transaction */
+		status = em_i2c_wait_for_event(priv);
+		if (status < 0)
+			goto out_reset;
+	}
+
+	/* Send / receive data */
+	for (count = 0; count < msg->len; count++) {
+		if (read) { /* Read transaction */
+			msg->buf[count] = readb(priv->base + I2C_OFS_IIC0);
+			em_clear_set_bit(priv, 0, I2C_BIT_WREL0, I2C_OFS_IICC0);
+
+		} else { /* Write transaction */
+			/* Received NACK */
+			if (!(status & I2C_BIT_ACKD0)) {
+				em_i2c_stop(priv);
+				goto out;
+			}
+
+			/* Write data */
+			writeb(msg->buf[count], priv->base + I2C_OFS_IIC0);
+		}
+
+		/* Wait for R/W transaction */
+		status = em_i2c_wait_for_event(priv);
+		if (status < 0)
+			goto out_reset;
+	}
+
+	if (stop)
+		em_i2c_stop(priv);
+
+	return count;
+
+out_reset:
+	em_i2c_reset(adap);
+out:
+	return status < 0 ? status : -ENXIO;
+}
+
+static int em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+	int num)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(adap);
+	int ret, i;
+
+	if (readb(priv->base + I2C_OFS_IICF0) & I2C_BIT_IICBSY)
+		return -EAGAIN;
+
+	for (i = 0; i < num; i++) {
+		ret = __em_i2c_xfer(adap, &msgs[i], (i == (num - 1)));
+		if (ret < 0)
+			return ret;
+	}
+
+	/* I2C transfer completed */
+	return num;
+}
+
+static bool em_i2c_slave_irq(struct em_i2c_device *priv)
+{
+	u8 status, value;
+	enum i2c_slave_event event;
+	int ret;
+
+	if (!priv->slave)
+		return false;
+
+	status = readb(priv->base + I2C_OFS_IICSE0);
+
+	/* Extension code, do not participate */
+	if (status & I2C_BIT_EXC0) {
+		em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0);
+		return true;
+	}
+
+	/* Stop detected, we don't know if it's for slave or master */
+	if (status & I2C_BIT_SPD0) {
+		/* Notify slave device */
+		i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
+		/* Pretend we did not handle the interrupt */
+		return false;
+	}
+
+	/* Only handle interrupts addressed to us */
+	if (!(status & I2C_BIT_COI0))
+		return false;
+
+	/* Enable stop interrupts */
+	em_clear_set_bit(priv, 0, I2C_BIT_SPIE0, I2C_OFS_IICC0);
+
+	/* Transmission or Reception */
+	if (status & I2C_BIT_TRC0) {
+		if (status & I2C_BIT_ACKD0) {
+			/* 9 bit interrupt mode */
+			em_clear_set_bit(priv, 0, I2C_BIT_WTIM0, I2C_OFS_IICC0);
+
+			/* Send data */
+			event = status & I2C_BIT_STD0 ?
+				I2C_SLAVE_READ_REQUESTED :
+				I2C_SLAVE_READ_PROCESSED;
+			i2c_slave_event(priv->slave, event, &value);
+			writeb(value, priv->base + I2C_OFS_IIC0);
+		} else {
+			/* NACK, stop transmitting */
+			em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0);
+		}
+	} else {
+		/* 8 bit interrupt mode */
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0,
+				I2C_OFS_IICC0);
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0,
+				I2C_OFS_IICC0);
+
+		if (status & I2C_BIT_STD0) {
+			i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_REQUESTED,
+					&value);
+		} else {
+			/* Recv data */
+			value = readb(priv->base + I2C_OFS_IIC0);
+			ret = i2c_slave_event(priv->slave,
+					I2C_SLAVE_WRITE_RECEIVED, &value);
+			if (ret < 0)
+				em_clear_set_bit(priv, I2C_BIT_ACKE0, 0,
+						I2C_OFS_IICC0);
+		}
+	}
+
+	return true;
+}
+
+static irqreturn_t em_i2c_irq_handler(int this_irq, void *dev_id)
+{
+	struct em_i2c_device *priv = dev_id;
+
+	if (em_i2c_slave_irq(priv))
+		return IRQ_HANDLED;
+
+	complete(&priv->msg_done);
+
+	return IRQ_HANDLED;
+}
+
+static u32 em_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SLAVE;
+}
+
+static int em_i2c_reg_slave(struct i2c_client *slave)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter);
+
+	if (priv->slave)
+		return -EBUSY;
+
+	if (slave->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+
+	priv->slave = slave;
+
+	/* Set slave address */
+	writeb(slave->addr << 1, priv->base + I2C_OFS_SVA0);
+
+	return 0;
+}
+
+static int em_i2c_unreg_slave(struct i2c_client *slave)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter);
+
+	WARN_ON(!priv->slave);
+
+	writeb(0, priv->base + I2C_OFS_SVA0);
+
+	/*
+	 * Wait for interrupt to finish. New slave irqs cannot happen because we
+	 * cleared the slave address and, thus, only extension codes will be
+	 * detected which do not use the slave ptr.
+	 */
+	synchronize_irq(priv->irq);
+	priv->slave = NULL;
+
+	return 0;
+}
+
+static const struct i2c_algorithm em_i2c_algo = {
+	.master_xfer = em_i2c_xfer,
+	.functionality = em_i2c_func,
+	.reg_slave      = em_i2c_reg_slave,
+	.unreg_slave    = em_i2c_unreg_slave,
+};
+
+static int em_i2c_probe(struct platform_device *pdev)
+{
+	struct em_i2c_device *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	strscpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name));
+
+	priv->sclk = devm_clk_get(&pdev->dev, "sclk");
+	if (IS_ERR(priv->sclk))
+		return PTR_ERR(priv->sclk);
+
+	ret = clk_prepare_enable(priv->sclk);
+	if (ret)
+		return ret;
+
+	priv->adap.timeout = msecs_to_jiffies(100);
+	priv->adap.retries = 5;
+	priv->adap.dev.parent = &pdev->dev;
+	priv->adap.algo = &em_i2c_algo;
+	priv->adap.owner = THIS_MODULE;
+	priv->adap.dev.of_node = pdev->dev.of_node;
+
+	init_completion(&priv->msg_done);
+
+	platform_set_drvdata(pdev, priv);
+	i2c_set_adapdata(&priv->adap, priv);
+
+	em_i2c_reset(&priv->adap);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto err_clk;
+	priv->irq = ret;
+	ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0,
+				"em_i2c", priv);
+	if (ret)
+		goto err_clk;
+
+	ret = i2c_add_adapter(&priv->adap);
+
+	if (ret)
+		goto err_clk;
+
+	dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr,
+		 priv->irq);
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(priv->sclk);
+	return ret;
+}
+
+static int em_i2c_remove(struct platform_device *dev)
+{
+	struct em_i2c_device *priv = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&priv->adap);
+	clk_disable_unprepare(priv->sclk);
+
+	return 0;
+}
+
+static const struct of_device_id em_i2c_ids[] = {
+	{ .compatible = "renesas,iic-emev2", },
+	{ }
+};
+
+static struct platform_driver em_i2c_driver = {
+	.probe = em_i2c_probe,
+	.remove = em_i2c_remove,
+	.driver = {
+		.name = "em-i2c",
+		.of_match_table = em_i2c_ids,
+	}
+};
+module_platform_driver(em_i2c_driver);
+
+MODULE_DESCRIPTION("EMEV2 I2C bus driver");
+MODULE_AUTHOR("Ian Molton");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, em_i2c_ids);