Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 839 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
new file mode 100644
index 000000000..a4b97fe3c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -0,0 +1,839 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2012-2016, The Linux Foundation. All rights reserved.
+// Copyright (c) 2017-2022 Linaro Limited.
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define CCI_HW_VERSION				0x0
+#define CCI_RESET_CMD				0x004
+#define CCI_RESET_CMD_MASK			0x0f73f3f7
+#define CCI_RESET_CMD_M0_MASK			0x000003f1
+#define CCI_RESET_CMD_M1_MASK			0x0003f001
+#define CCI_QUEUE_START				0x008
+#define CCI_HALT_REQ				0x034
+#define CCI_HALT_REQ_I2C_M0_Q0Q1		BIT(0)
+#define CCI_HALT_REQ_I2C_M1_Q0Q1		BIT(1)
+
+#define CCI_I2C_Mm_SCL_CTL(m)			(0x100 + 0x100 * (m))
+#define CCI_I2C_Mm_SDA_CTL_0(m)			(0x104 + 0x100 * (m))
+#define CCI_I2C_Mm_SDA_CTL_1(m)			(0x108 + 0x100 * (m))
+#define CCI_I2C_Mm_SDA_CTL_2(m)			(0x10c + 0x100 * (m))
+#define CCI_I2C_Mm_MISC_CTL(m)			(0x110 + 0x100 * (m))
+
+#define CCI_I2C_Mm_READ_DATA(m)			(0x118 + 0x100 * (m))
+#define CCI_I2C_Mm_READ_BUF_LEVEL(m)		(0x11c + 0x100 * (m))
+#define CCI_I2C_Mm_Qn_EXEC_WORD_CNT(m, n)	(0x300 + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_CUR_WORD_CNT(m, n)	(0x304 + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_CUR_CMD(m, n)		(0x308 + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_REPORT_STATUS(m, n)	(0x30c + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_LOAD_DATA(m, n)		(0x310 + 0x200 * (m) + 0x100 * (n))
+
+#define CCI_IRQ_GLOBAL_CLEAR_CMD		0xc00
+#define CCI_IRQ_MASK_0				0xc04
+#define CCI_IRQ_MASK_0_I2C_M0_RD_DONE		BIT(0)
+#define CCI_IRQ_MASK_0_I2C_M0_Q0_REPORT		BIT(4)
+#define CCI_IRQ_MASK_0_I2C_M0_Q1_REPORT		BIT(8)
+#define CCI_IRQ_MASK_0_I2C_M1_RD_DONE		BIT(12)
+#define CCI_IRQ_MASK_0_I2C_M1_Q0_REPORT		BIT(16)
+#define CCI_IRQ_MASK_0_I2C_M1_Q1_REPORT		BIT(20)
+#define CCI_IRQ_MASK_0_RST_DONE_ACK		BIT(24)
+#define CCI_IRQ_MASK_0_I2C_M0_Q0Q1_HALT_ACK	BIT(25)
+#define CCI_IRQ_MASK_0_I2C_M1_Q0Q1_HALT_ACK	BIT(26)
+#define CCI_IRQ_MASK_0_I2C_M0_ERROR		0x18000ee6
+#define CCI_IRQ_MASK_0_I2C_M1_ERROR		0x60ee6000
+#define CCI_IRQ_CLEAR_0				0xc08
+#define CCI_IRQ_STATUS_0			0xc0c
+#define CCI_IRQ_STATUS_0_I2C_M0_RD_DONE		BIT(0)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q0_REPORT	BIT(4)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q1_REPORT	BIT(8)
+#define CCI_IRQ_STATUS_0_I2C_M1_RD_DONE		BIT(12)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q0_REPORT	BIT(16)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q1_REPORT	BIT(20)
+#define CCI_IRQ_STATUS_0_RST_DONE_ACK		BIT(24)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q0Q1_HALT_ACK	BIT(25)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q0Q1_HALT_ACK	BIT(26)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q0_NACK_ERR	BIT(27)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q1_NACK_ERR	BIT(28)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q0_NACK_ERR	BIT(29)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q1_NACK_ERR	BIT(30)
+#define CCI_IRQ_STATUS_0_I2C_M0_ERROR		0x18000ee6
+#define CCI_IRQ_STATUS_0_I2C_M1_ERROR		0x60ee6000
+
+#define CCI_TIMEOUT	(msecs_to_jiffies(100))
+#define NUM_MASTERS	2
+#define NUM_QUEUES	2
+
+/* Max number of resources + 1 for a NULL terminator */
+#define CCI_RES_MAX	6
+
+#define CCI_I2C_SET_PARAM	1
+#define CCI_I2C_REPORT		8
+#define CCI_I2C_WRITE		9
+#define CCI_I2C_READ		10
+
+#define CCI_I2C_REPORT_IRQ_EN	BIT(8)
+
+enum {
+	I2C_MODE_STANDARD,
+	I2C_MODE_FAST,
+	I2C_MODE_FAST_PLUS,
+};
+
+enum cci_i2c_queue_t {
+	QUEUE_0,
+	QUEUE_1
+};
+
+struct hw_params {
+	u16 thigh; /* HIGH period of the SCL clock in clock ticks */
+	u16 tlow; /* LOW period of the SCL clock */
+	u16 tsu_sto; /* set-up time for STOP condition */
+	u16 tsu_sta; /* set-up time for a repeated START condition */
+	u16 thd_dat; /* data hold time */
+	u16 thd_sta; /* hold time (repeated) START condition */
+	u16 tbuf; /* bus free time between a STOP and START condition */
+	u8 scl_stretch_en;
+	u16 trdhld;
+	u16 tsp; /* pulse width of spikes suppressed by the input filter */
+};
+
+struct cci;
+
+struct cci_master {
+	struct i2c_adapter adap;
+	u16 master;
+	u8 mode;
+	int status;
+	struct completion irq_complete;
+	struct cci *cci;
+};
+
+struct cci_data {
+	unsigned int num_masters;
+	struct i2c_adapter_quirks quirks;
+	u16 queue_size[NUM_QUEUES];
+	unsigned long cci_clk_rate;
+	struct hw_params params[3];
+};
+
+struct cci {
+	struct device *dev;
+	void __iomem *base;
+	unsigned int irq;
+	const struct cci_data *data;
+	struct clk_bulk_data *clocks;
+	int nclocks;
+	struct cci_master master[NUM_MASTERS];
+};
+
+static irqreturn_t cci_isr(int irq, void *dev)
+{
+	struct cci *cci = dev;
+	u32 val, reset = 0;
+	int ret = IRQ_NONE;
+
+	val = readl(cci->base + CCI_IRQ_STATUS_0);
+	writel(val, cci->base + CCI_IRQ_CLEAR_0);
+	writel(0x1, cci->base + CCI_IRQ_GLOBAL_CLEAR_CMD);
+
+	if (val & CCI_IRQ_STATUS_0_RST_DONE_ACK) {
+		complete(&cci->master[0].irq_complete);
+		if (cci->master[1].master)
+			complete(&cci->master[1].irq_complete);
+		ret = IRQ_HANDLED;
+	}
+
+	if (val & CCI_IRQ_STATUS_0_I2C_M0_RD_DONE ||
+			val & CCI_IRQ_STATUS_0_I2C_M0_Q0_REPORT ||
+			val & CCI_IRQ_STATUS_0_I2C_M0_Q1_REPORT) {
+		cci->master[0].status = 0;
+		complete(&cci->master[0].irq_complete);
+		ret = IRQ_HANDLED;
+	}
+
+	if (val & CCI_IRQ_STATUS_0_I2C_M1_RD_DONE ||
+			val & CCI_IRQ_STATUS_0_I2C_M1_Q0_REPORT ||
+			val & CCI_IRQ_STATUS_0_I2C_M1_Q1_REPORT) {
+		cci->master[1].status = 0;
+		complete(&cci->master[1].irq_complete);
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M0_Q0Q1_HALT_ACK)) {
+		reset = CCI_RESET_CMD_M0_MASK;
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M1_Q0Q1_HALT_ACK)) {
+		reset = CCI_RESET_CMD_M1_MASK;
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(reset))
+		writel(reset, cci->base + CCI_RESET_CMD);
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M0_ERROR)) {
+		if (val & CCI_IRQ_STATUS_0_I2C_M0_Q0_NACK_ERR ||
+			val & CCI_IRQ_STATUS_0_I2C_M0_Q1_NACK_ERR)
+			cci->master[0].status = -ENXIO;
+		else
+			cci->master[0].status = -EIO;
+
+		writel(CCI_HALT_REQ_I2C_M0_Q0Q1, cci->base + CCI_HALT_REQ);
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M1_ERROR)) {
+		if (val & CCI_IRQ_STATUS_0_I2C_M1_Q0_NACK_ERR ||
+			val & CCI_IRQ_STATUS_0_I2C_M1_Q1_NACK_ERR)
+			cci->master[1].status = -ENXIO;
+		else
+			cci->master[1].status = -EIO;
+
+		writel(CCI_HALT_REQ_I2C_M1_Q0Q1, cci->base + CCI_HALT_REQ);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int cci_halt(struct cci *cci, u8 master_num)
+{
+	struct cci_master *master;
+	u32 val;
+
+	if (master_num >= cci->data->num_masters) {
+		dev_err(cci->dev, "Unsupported master idx (%u)\n", master_num);
+		return -EINVAL;
+	}
+
+	val = BIT(master_num);
+	master = &cci->master[master_num];
+
+	reinit_completion(&master->irq_complete);
+	writel(val, cci->base + CCI_HALT_REQ);
+
+	if (!wait_for_completion_timeout(&master->irq_complete, CCI_TIMEOUT)) {
+		dev_err(cci->dev, "CCI halt timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cci_reset(struct cci *cci)
+{
+	/*
+	 * we reset the whole controller, here and for implicity use
+	 * master[0].xxx for waiting on it.
+	 */
+	reinit_completion(&cci->master[0].irq_complete);
+	writel(CCI_RESET_CMD_MASK, cci->base + CCI_RESET_CMD);
+
+	if (!wait_for_completion_timeout(&cci->master[0].irq_complete,
+					 CCI_TIMEOUT)) {
+		dev_err(cci->dev, "CCI reset timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cci_init(struct cci *cci)
+{
+	u32 val = CCI_IRQ_MASK_0_I2C_M0_RD_DONE |
+			CCI_IRQ_MASK_0_I2C_M0_Q0_REPORT |
+			CCI_IRQ_MASK_0_I2C_M0_Q1_REPORT |
+			CCI_IRQ_MASK_0_I2C_M1_RD_DONE |
+			CCI_IRQ_MASK_0_I2C_M1_Q0_REPORT |
+			CCI_IRQ_MASK_0_I2C_M1_Q1_REPORT |
+			CCI_IRQ_MASK_0_RST_DONE_ACK |
+			CCI_IRQ_MASK_0_I2C_M0_Q0Q1_HALT_ACK |
+			CCI_IRQ_MASK_0_I2C_M1_Q0Q1_HALT_ACK |
+			CCI_IRQ_MASK_0_I2C_M0_ERROR |
+			CCI_IRQ_MASK_0_I2C_M1_ERROR;
+	int i;
+
+	writel(val, cci->base + CCI_IRQ_MASK_0);
+
+	for (i = 0; i < cci->data->num_masters; i++) {
+		int mode = cci->master[i].mode;
+		const struct hw_params *hw;
+
+		if (!cci->master[i].cci)
+			continue;
+
+		hw = &cci->data->params[mode];
+
+		val = hw->thigh << 16 | hw->tlow;
+		writel(val, cci->base + CCI_I2C_Mm_SCL_CTL(i));
+
+		val = hw->tsu_sto << 16 | hw->tsu_sta;
+		writel(val, cci->base + CCI_I2C_Mm_SDA_CTL_0(i));
+
+		val = hw->thd_dat << 16 | hw->thd_sta;
+		writel(val, cci->base + CCI_I2C_Mm_SDA_CTL_1(i));
+
+		val = hw->tbuf;
+		writel(val, cci->base + CCI_I2C_Mm_SDA_CTL_2(i));
+
+		val = hw->scl_stretch_en << 8 | hw->trdhld << 4 | hw->tsp;
+		writel(val, cci->base + CCI_I2C_Mm_MISC_CTL(i));
+	}
+
+	return 0;
+}
+
+static int cci_run_queue(struct cci *cci, u8 master, u8 queue)
+{
+	u32 val;
+
+	val = readl(cci->base + CCI_I2C_Mm_Qn_CUR_WORD_CNT(master, queue));
+	writel(val, cci->base + CCI_I2C_Mm_Qn_EXEC_WORD_CNT(master, queue));
+
+	reinit_completion(&cci->master[master].irq_complete);
+	val = BIT(master * 2 + queue);
+	writel(val, cci->base + CCI_QUEUE_START);
+
+	if (!wait_for_completion_timeout(&cci->master[master].irq_complete,
+					 CCI_TIMEOUT)) {
+		dev_err(cci->dev, "master %d queue %d timeout\n",
+			master, queue);
+		cci_reset(cci);
+		cci_init(cci);
+		return -ETIMEDOUT;
+	}
+
+	return cci->master[master].status;
+}
+
+static int cci_validate_queue(struct cci *cci, u8 master, u8 queue)
+{
+	u32 val;
+
+	val = readl(cci->base + CCI_I2C_Mm_Qn_CUR_WORD_CNT(master, queue));
+	if (val == cci->data->queue_size[queue])
+		return -EINVAL;
+
+	if (!val)
+		return 0;
+
+	val = CCI_I2C_REPORT | CCI_I2C_REPORT_IRQ_EN;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	return cci_run_queue(cci, master, queue);
+}
+
+static int cci_i2c_read(struct cci *cci, u16 master,
+			u16 addr, u8 *buf, u16 len)
+{
+	u32 val, words_read, words_exp;
+	u8 queue = QUEUE_1;
+	int i, index = 0, ret;
+	bool first = true;
+
+	/*
+	 * Call validate queue to make sure queue is empty before starting.
+	 * This is to avoid overflow / underflow of queue.
+	 */
+	ret = cci_validate_queue(cci, master, queue);
+	if (ret < 0)
+		return ret;
+
+	val = CCI_I2C_SET_PARAM | (addr & 0x7f) << 4;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	val = CCI_I2C_READ | len << 4;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	ret = cci_run_queue(cci, master, queue);
+	if (ret < 0)
+		return ret;
+
+	words_read = readl(cci->base + CCI_I2C_Mm_READ_BUF_LEVEL(master));
+	words_exp = len / 4 + 1;
+	if (words_read != words_exp) {
+		dev_err(cci->dev, "words read = %d, words expected = %d\n",
+			words_read, words_exp);
+		return -EIO;
+	}
+
+	do {
+		val = readl(cci->base + CCI_I2C_Mm_READ_DATA(master));
+
+		for (i = 0; i < 4 && index < len; i++) {
+			if (first) {
+				/* The LS byte of this register represents the
+				 * first byte read from the slave during a read
+				 * access.
+				 */
+				first = false;
+				continue;
+			}
+			buf[index++] = (val >> (i * 8)) & 0xff;
+		}
+	} while (--words_read);
+
+	return 0;
+}
+
+static int cci_i2c_write(struct cci *cci, u16 master,
+			 u16 addr, u8 *buf, u16 len)
+{
+	u8 queue = QUEUE_0;
+	u8 load[12] = { 0 };
+	int i = 0, j, ret;
+	u32 val;
+
+	/*
+	 * Call validate queue to make sure queue is empty before starting.
+	 * This is to avoid overflow / underflow of queue.
+	 */
+	ret = cci_validate_queue(cci, master, queue);
+	if (ret < 0)
+		return ret;
+
+	val = CCI_I2C_SET_PARAM | (addr & 0x7f) << 4;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	load[i++] = CCI_I2C_WRITE | len << 4;
+
+	for (j = 0; j < len; j++)
+		load[i++] = buf[j];
+
+	for (j = 0; j < i; j += 4) {
+		val = load[j];
+		val |= load[j + 1] << 8;
+		val |= load[j + 2] << 16;
+		val |= load[j + 3] << 24;
+		writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+	}
+
+	val = CCI_I2C_REPORT | CCI_I2C_REPORT_IRQ_EN;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	return cci_run_queue(cci, master, queue);
+}
+
+static int cci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct cci_master *cci_master = i2c_get_adapdata(adap);
+	struct cci *cci = cci_master->cci;
+	int i, ret;
+
+	ret = pm_runtime_get_sync(cci->dev);
+	if (ret < 0)
+		goto err;
+
+	for (i = 0; i < num; i++) {
+		if (msgs[i].flags & I2C_M_RD)
+			ret = cci_i2c_read(cci, cci_master->master,
+					   msgs[i].addr, msgs[i].buf,
+					   msgs[i].len);
+		else
+			ret = cci_i2c_write(cci, cci_master->master,
+					    msgs[i].addr, msgs[i].buf,
+					    msgs[i].len);
+
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+err:
+	pm_runtime_mark_last_busy(cci->dev);
+	pm_runtime_put_autosuspend(cci->dev);
+
+	return ret;
+}
+
+static u32 cci_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm cci_algo = {
+	.master_xfer	= cci_xfer,
+	.functionality	= cci_func,
+};
+
+static int cci_enable_clocks(struct cci *cci)
+{
+	return clk_bulk_prepare_enable(cci->nclocks, cci->clocks);
+}
+
+static void cci_disable_clocks(struct cci *cci)
+{
+	clk_bulk_disable_unprepare(cci->nclocks, cci->clocks);
+}
+
+static int __maybe_unused cci_suspend_runtime(struct device *dev)
+{
+	struct cci *cci = dev_get_drvdata(dev);
+
+	cci_disable_clocks(cci);
+	return 0;
+}
+
+static int __maybe_unused cci_resume_runtime(struct device *dev)
+{
+	struct cci *cci = dev_get_drvdata(dev);
+	int ret;
+
+	ret = cci_enable_clocks(cci);
+	if (ret)
+		return ret;
+
+	cci_init(cci);
+	return 0;
+}
+
+static int __maybe_unused cci_suspend(struct device *dev)
+{
+	if (!pm_runtime_suspended(dev))
+		return cci_suspend_runtime(dev);
+
+	return 0;
+}
+
+static int __maybe_unused cci_resume(struct device *dev)
+{
+	cci_resume_runtime(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_request_autosuspend(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops qcom_cci_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(cci_suspend, cci_resume)
+	SET_RUNTIME_PM_OPS(cci_suspend_runtime, cci_resume_runtime, NULL)
+};
+
+static int cci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned long cci_clk_rate = 0;
+	struct device_node *child;
+	struct resource *r;
+	struct cci *cci;
+	int ret, i;
+	u32 val;
+
+	cci = devm_kzalloc(dev, sizeof(*cci), GFP_KERNEL);
+	if (!cci)
+		return -ENOMEM;
+
+	cci->dev = dev;
+	platform_set_drvdata(pdev, cci);
+	cci->data = device_get_match_data(dev);
+	if (!cci->data)
+		return -ENOENT;
+
+	for_each_available_child_of_node(dev->of_node, child) {
+		struct cci_master *master;
+		u32 idx;
+
+		ret = of_property_read_u32(child, "reg", &idx);
+		if (ret) {
+			dev_err(dev, "%pOF invalid 'reg' property", child);
+			continue;
+		}
+
+		if (idx >= cci->data->num_masters) {
+			dev_err(dev, "%pOF invalid 'reg' value: %u (max is %u)",
+				child, idx, cci->data->num_masters - 1);
+			continue;
+		}
+
+		master = &cci->master[idx];
+		master->adap.quirks = &cci->data->quirks;
+		master->adap.algo = &cci_algo;
+		master->adap.dev.parent = dev;
+		master->adap.dev.of_node = of_node_get(child);
+		master->master = idx;
+		master->cci = cci;
+
+		i2c_set_adapdata(&master->adap, master);
+		snprintf(master->adap.name, sizeof(master->adap.name), "Qualcomm-CCI");
+
+		master->mode = I2C_MODE_STANDARD;
+		ret = of_property_read_u32(child, "clock-frequency", &val);
+		if (!ret) {
+			if (val == I2C_MAX_FAST_MODE_FREQ)
+				master->mode = I2C_MODE_FAST;
+			else if (val == I2C_MAX_FAST_MODE_PLUS_FREQ)
+				master->mode = I2C_MODE_FAST_PLUS;
+		}
+
+		init_completion(&master->irq_complete);
+	}
+
+	/* Memory */
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cci->base = devm_ioremap_resource(dev, r);
+	if (IS_ERR(cci->base))
+		return PTR_ERR(cci->base);
+
+	/* Clocks */
+
+	ret = devm_clk_bulk_get_all(dev, &cci->clocks);
+	if (ret < 1) {
+		dev_err(dev, "failed to get clocks %d\n", ret);
+		return ret;
+	}
+	cci->nclocks = ret;
+
+	/* Retrieve CCI clock rate */
+	for (i = 0; i < cci->nclocks; i++) {
+		if (!strcmp(cci->clocks[i].id, "cci")) {
+			cci_clk_rate = clk_get_rate(cci->clocks[i].clk);
+			break;
+		}
+	}
+
+	if (cci_clk_rate != cci->data->cci_clk_rate) {
+		/* cci clock set by the bootloader or via assigned clock rate
+		 * in DT.
+		 */
+		dev_warn(dev, "Found %lu cci clk rate while %lu was expected\n",
+			 cci_clk_rate, cci->data->cci_clk_rate);
+	}
+
+	ret = cci_enable_clocks(cci);
+	if (ret < 0)
+		return ret;
+
+	/* Interrupt */
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto disable_clocks;
+	cci->irq = ret;
+
+	ret = devm_request_irq(dev, cci->irq, cci_isr, 0, dev_name(dev), cci);
+	if (ret < 0) {
+		dev_err(dev, "request_irq failed, ret: %d\n", ret);
+		goto disable_clocks;
+	}
+
+	val = readl(cci->base + CCI_HW_VERSION);
+	dev_dbg(dev, "CCI HW version = 0x%08x", val);
+
+	ret = cci_reset(cci);
+	if (ret < 0)
+		goto error;
+
+	ret = cci_init(cci);
+	if (ret < 0)
+		goto error;
+
+	pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	for (i = 0; i < cci->data->num_masters; i++) {
+		if (!cci->master[i].cci)
+			continue;
+
+		ret = i2c_add_adapter(&cci->master[i].adap);
+		if (ret < 0) {
+			of_node_put(cci->master[i].adap.dev.of_node);
+			goto error_i2c;
+		}
+	}
+
+	return 0;
+
+error_i2c:
+	pm_runtime_disable(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+
+	for (--i ; i >= 0; i--) {
+		if (cci->master[i].cci) {
+			i2c_del_adapter(&cci->master[i].adap);
+			of_node_put(cci->master[i].adap.dev.of_node);
+		}
+	}
+error:
+	disable_irq(cci->irq);
+disable_clocks:
+	cci_disable_clocks(cci);
+
+	return ret;
+}
+
+static int cci_remove(struct platform_device *pdev)
+{
+	struct cci *cci = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < cci->data->num_masters; i++) {
+		if (cci->master[i].cci) {
+			i2c_del_adapter(&cci->master[i].adap);
+			of_node_put(cci->master[i].adap.dev.of_node);
+		}
+		cci_halt(cci, i);
+	}
+
+	disable_irq(cci->irq);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	return 0;
+}
+
+static const struct cci_data cci_v1_data = {
+	.num_masters = 1,
+	.queue_size = { 64, 16 },
+	.quirks = {
+		.max_write_len = 10,
+		.max_read_len = 12,
+	},
+	.cci_clk_rate =  19200000,
+	.params[I2C_MODE_STANDARD] = {
+		.thigh = 78,
+		.tlow = 114,
+		.tsu_sto = 28,
+		.tsu_sta = 28,
+		.thd_dat = 10,
+		.thd_sta = 77,
+		.tbuf = 118,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 1
+	},
+	.params[I2C_MODE_FAST] = {
+		.thigh = 20,
+		.tlow = 28,
+		.tsu_sto = 21,
+		.tsu_sta = 21,
+		.thd_dat = 13,
+		.thd_sta = 18,
+		.tbuf = 32,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+};
+
+static const struct cci_data cci_v1_5_data = {
+	.num_masters = 2,
+	.queue_size = { 64, 16 },
+	.quirks = {
+		.max_write_len = 10,
+		.max_read_len = 12,
+	},
+	.cci_clk_rate =  19200000,
+	.params[I2C_MODE_STANDARD] = {
+		.thigh = 78,
+		.tlow = 114,
+		.tsu_sto = 28,
+		.tsu_sta = 28,
+		.thd_dat = 10,
+		.thd_sta = 77,
+		.tbuf = 118,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 1
+	},
+	.params[I2C_MODE_FAST] = {
+		.thigh = 20,
+		.tlow = 28,
+		.tsu_sto = 21,
+		.tsu_sta = 21,
+		.thd_dat = 13,
+		.thd_sta = 18,
+		.tbuf = 32,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+};
+
+static const struct cci_data cci_v2_data = {
+	.num_masters = 2,
+	.queue_size = { 64, 16 },
+	.quirks = {
+		.max_write_len = 11,
+		.max_read_len = 12,
+	},
+	.cci_clk_rate =  37500000,
+	.params[I2C_MODE_STANDARD] = {
+		.thigh = 201,
+		.tlow = 174,
+		.tsu_sto = 204,
+		.tsu_sta = 231,
+		.thd_dat = 22,
+		.thd_sta = 162,
+		.tbuf = 227,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+	.params[I2C_MODE_FAST] = {
+		.thigh = 38,
+		.tlow = 56,
+		.tsu_sto = 40,
+		.tsu_sta = 40,
+		.thd_dat = 22,
+		.thd_sta = 35,
+		.tbuf = 62,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+	.params[I2C_MODE_FAST_PLUS] = {
+		.thigh = 16,
+		.tlow = 22,
+		.tsu_sto = 17,
+		.tsu_sta = 18,
+		.thd_dat = 16,
+		.thd_sta = 15,
+		.tbuf = 24,
+		.scl_stretch_en = 0,
+		.trdhld = 3,
+		.tsp = 3
+	},
+};
+
+static const struct of_device_id cci_dt_match[] = {
+	{ .compatible = "qcom,msm8226-cci", .data = &cci_v1_data},
+	{ .compatible = "qcom,msm8916-cci", .data = &cci_v1_data},
+	{ .compatible = "qcom,msm8974-cci", .data = &cci_v1_5_data},
+	{ .compatible = "qcom,msm8996-cci", .data = &cci_v2_data},
+	{ .compatible = "qcom,sdm845-cci", .data = &cci_v2_data},
+	{ .compatible = "qcom,sm8250-cci", .data = &cci_v2_data},
+	{ .compatible = "qcom,sm8450-cci", .data = &cci_v2_data},
+	{}
+};
+MODULE_DEVICE_TABLE(of, cci_dt_match);
+
+static struct platform_driver qcom_cci_driver = {
+	.probe  = cci_probe,
+	.remove = cci_remove,
+	.driver = {
+		.name = "i2c-qcom-cci",
+		.of_match_table = cci_dt_match,
+		.pm = &qcom_cci_pm,
+	},
+};
+
+module_platform_driver(qcom_cci_driver);
+
+MODULE_DESCRIPTION("Qualcomm Camera Control Interface driver");
+MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>");
+MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>");
+MODULE_LICENSE("GPL v2");