Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 311 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
new file mode 100644
index 000000000..b0f012079
--- /dev/null
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the TAOS evaluation modules
+ * These devices include an I2C master which can be controlled over the
+ * serial port.
+ *
+ * Copyright (C) 2007 Jean Delvare <jdelvare@suse.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#define TAOS_BUFFER_SIZE	63
+
+#define TAOS_STATE_INIT		0
+#define TAOS_STATE_IDLE		1
+#define TAOS_STATE_EOFF		2
+#define TAOS_STATE_RECV		3
+
+#define TAOS_CMD_RESET		0x12
+#define TAOS_CMD_ECHO_ON	'+'
+#define TAOS_CMD_ECHO_OFF	'-'
+
+static DECLARE_WAIT_QUEUE_HEAD(wq);
+
+struct taos_data {
+	struct i2c_adapter adapter;
+	struct i2c_client *client;
+	int state;
+	u8 addr;		/* last used address */
+	unsigned char buffer[TAOS_BUFFER_SIZE];
+	unsigned int pos;	/* position inside the buffer */
+};
+
+/* TAOS TSL2550 EVM */
+static const struct i2c_board_info tsl2550_info = {
+	I2C_BOARD_INFO("tsl2550", 0x39),
+};
+
+/* Instantiate i2c devices based on the adapter name */
+static struct i2c_client *taos_instantiate_device(struct i2c_adapter *adapter)
+{
+	if (!strncmp(adapter->name, "TAOS TSL2550 EVM", 16)) {
+		dev_info(&adapter->dev, "Instantiating device %s at 0x%02x\n",
+			tsl2550_info.type, tsl2550_info.addr);
+		return i2c_new_client_device(adapter, &tsl2550_info);
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+			   unsigned short flags, char read_write, u8 command,
+			   int size, union i2c_smbus_data *data)
+{
+	struct serio *serio = adapter->algo_data;
+	struct taos_data *taos = serio_get_drvdata(serio);
+	char *p;
+
+	/* Encode our transaction. "@" is for the device address, "$" for the
+	   SMBus command and "#" for the data. */
+	p = taos->buffer;
+
+	/* The device remembers the last used address, no need to send it
+	   again if it's the same */
+	if (addr != taos->addr)
+		p += sprintf(p, "@%02X", addr);
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE)
+			sprintf(p, "$#%02X", command);
+		else
+			sprintf(p, "$");
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_WRITE)
+			sprintf(p, "$%02X#%02X", command, data->byte);
+		else
+			sprintf(p, "$%02X", command);
+		break;
+	default:
+		dev_warn(&adapter->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	/* Send the transaction to the TAOS EVM */
+	dev_dbg(&adapter->dev, "Command buffer: %s\n", taos->buffer);
+	for (p = taos->buffer; *p; p++)
+		serio_write(serio, *p);
+
+	taos->addr = addr;
+
+	/* Start the transaction and read the answer */
+	taos->pos = 0;
+	taos->state = TAOS_STATE_RECV;
+	serio_write(serio, read_write == I2C_SMBUS_WRITE ? '>' : '<');
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(150));
+	if (taos->state != TAOS_STATE_IDLE
+	 || taos->pos != 5) {
+		dev_err(&adapter->dev, "Transaction timeout (pos=%d)\n",
+			taos->pos);
+		return -EIO;
+	}
+	dev_dbg(&adapter->dev, "Answer buffer: %s\n", taos->buffer);
+
+	/* Interpret the returned string */
+	p = taos->buffer + 1;
+	p[3] = '\0';
+	if (!strcmp(p, "NAK"))
+		return -ENODEV;
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		if (!strcmp(p, "ACK"))
+			return 0;
+	} else {
+		if (p[0] == 'x') {
+			/*
+			 * Voluntarily dropping error code of kstrtou8 since all
+			 * error code that it could return are invalid according
+			 * to Documentation/i2c/fault-codes.rst.
+			 */
+			if (kstrtou8(p + 1, 16, &data->byte))
+				return -EPROTO;
+			return 0;
+		}
+	}
+
+	return -EIO;
+}
+
+static u32 taos_smbus_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static const struct i2c_algorithm taos_algorithm = {
+	.smbus_xfer	= taos_smbus_xfer,
+	.functionality	= taos_smbus_func,
+};
+
+static irqreturn_t taos_interrupt(struct serio *serio, unsigned char data,
+				  unsigned int flags)
+{
+	struct taos_data *taos = serio_get_drvdata(serio);
+
+	switch (taos->state) {
+	case TAOS_STATE_INIT:
+		taos->buffer[taos->pos++] = data;
+		if (data == ':'
+		 || taos->pos == TAOS_BUFFER_SIZE - 1) {
+			taos->buffer[taos->pos] = '\0';
+			taos->state = TAOS_STATE_IDLE;
+			wake_up_interruptible(&wq);
+		}
+		break;
+	case TAOS_STATE_EOFF:
+		taos->state = TAOS_STATE_IDLE;
+		wake_up_interruptible(&wq);
+		break;
+	case TAOS_STATE_RECV:
+		taos->buffer[taos->pos++] = data;
+		if (data == ']') {
+			taos->buffer[taos->pos] = '\0';
+			taos->state = TAOS_STATE_IDLE;
+			wake_up_interruptible(&wq);
+		}
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* Extract the adapter name from the buffer received after reset.
+   The buffer is modified and a pointer inside the buffer is returned. */
+static char *taos_adapter_name(char *buffer)
+{
+	char *start, *end;
+
+	start = strstr(buffer, "TAOS ");
+	if (!start)
+		return NULL;
+
+	end = strchr(start, '\r');
+	if (!end)
+		return NULL;
+	*end = '\0';
+
+	return start;
+}
+
+static int taos_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct taos_data *taos;
+	struct i2c_adapter *adapter;
+	char *name;
+	int err;
+
+	taos = kzalloc(sizeof(struct taos_data), GFP_KERNEL);
+	if (!taos) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	taos->state = TAOS_STATE_INIT;
+	serio_set_drvdata(serio, taos);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto exit_kfree;
+
+	adapter = &taos->adapter;
+	adapter->owner = THIS_MODULE;
+	adapter->algo = &taos_algorithm;
+	adapter->algo_data = serio;
+	adapter->dev.parent = &serio->dev;
+
+	/* Reset the TAOS evaluation module to identify it */
+	serio_write(serio, TAOS_CMD_RESET);
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(2000));
+
+	if (taos->state != TAOS_STATE_IDLE) {
+		err = -ENODEV;
+		dev_err(&serio->dev, "TAOS EVM reset failed (state=%d, "
+			"pos=%d)\n", taos->state, taos->pos);
+		goto exit_close;
+	}
+
+	name = taos_adapter_name(taos->buffer);
+	if (!name) {
+		err = -ENODEV;
+		dev_err(&serio->dev, "TAOS EVM identification failed\n");
+		goto exit_close;
+	}
+	strscpy(adapter->name, name, sizeof(adapter->name));
+
+	/* Turn echo off for better performance */
+	taos->state = TAOS_STATE_EOFF;
+	serio_write(serio, TAOS_CMD_ECHO_OFF);
+
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(250));
+	if (taos->state != TAOS_STATE_IDLE) {
+		err = -ENODEV;
+		dev_err(&serio->dev, "TAOS EVM echo off failed "
+			"(state=%d)\n", taos->state);
+		goto exit_close;
+	}
+
+	err = i2c_add_adapter(adapter);
+	if (err)
+		goto exit_close;
+	dev_info(&serio->dev, "Connected to TAOS EVM\n");
+
+	taos->client = taos_instantiate_device(adapter);
+	return 0;
+
+ exit_close:
+	serio_close(serio);
+ exit_kfree:
+	kfree(taos);
+ exit:
+	return err;
+}
+
+static void taos_disconnect(struct serio *serio)
+{
+	struct taos_data *taos = serio_get_drvdata(serio);
+
+	i2c_unregister_device(taos->client);
+	i2c_del_adapter(&taos->adapter);
+	serio_close(serio);
+	kfree(taos);
+
+	dev_info(&serio->dev, "Disconnected from TAOS EVM\n");
+}
+
+static const struct serio_device_id taos_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_TAOSEVM,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(serio, taos_serio_ids);
+
+static struct serio_driver taos_drv = {
+	.driver		= {
+		.name	= "taos-evm",
+	},
+	.description	= "TAOS evaluation module driver",
+	.id_table	= taos_serio_ids,
+	.connect	= taos_connect,
+	.disconnect	= taos_disconnect,
+	.interrupt	= taos_interrupt,
+};
+
+module_serio_driver(taos_drv);
+
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("TAOS evaluation module driver");
+MODULE_LICENSE("GPL");