Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 265 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
new file mode 100644
index 000000000..a77cd86fe
--- /dev/null
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -0,0 +1,265 @@
+/*
+ * Cavium ThunderX i2c driver.
+ *
+ * Copyright (C) 2015,2016 Cavium Inc.
+ * Authors: Fred Martin <fmartin@caviumnetworks.com>
+ *	    Jan Glauber <jglauber@cavium.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+
+#include "i2c-octeon-core.h"
+
+#define DRV_NAME "i2c-thunderx"
+
+#define PCI_DEVICE_ID_THUNDER_TWSI	0xa012
+
+#define SYS_FREQ_DEFAULT		700000000
+
+#define TWSI_INT_ENA_W1C		0x1028
+#define TWSI_INT_ENA_W1S		0x1030
+
+/*
+ * Enable the CORE interrupt.
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void thunder_i2c_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+/*
+ * Disable the CORE interrupt.
+ */
+static void thunder_i2c_int_disable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static void thunder_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+static void thunder_i2c_hlc_int_disable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static u32 thunderx_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm thunderx_i2c_algo = {
+	.master_xfer = octeon_i2c_xfer,
+	.functionality = thunderx_i2c_functionality,
+};
+
+static const struct i2c_adapter thunderx_i2c_ops = {
+	.owner	= THIS_MODULE,
+	.name	= "ThunderX adapter",
+	.algo	= &thunderx_i2c_algo,
+};
+
+static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c)
+{
+	int ret;
+
+	if (acpi_disabled) {
+		/* DT */
+		i2c->clk = clk_get(dev, NULL);
+		if (IS_ERR(i2c->clk)) {
+			i2c->clk = NULL;
+			goto skip;
+		}
+
+		ret = clk_prepare_enable(i2c->clk);
+		if (ret)
+			goto skip;
+		i2c->sys_freq = clk_get_rate(i2c->clk);
+	} else {
+		/* ACPI */
+		device_property_read_u32(dev, "sclk", &i2c->sys_freq);
+	}
+
+skip:
+	if (!i2c->sys_freq)
+		i2c->sys_freq = SYS_FREQ_DEFAULT;
+}
+
+static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
+{
+	if (!clk)
+		return;
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+}
+
+static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
+				      struct device_node *node)
+{
+	struct i2c_client *ara;
+
+	if (!node)
+		return -EINVAL;
+
+	i2c->alert_data.irq = irq_of_parse_and_map(node, 0);
+	if (!i2c->alert_data.irq)
+		return -EINVAL;
+
+	ara = i2c_new_smbus_alert_device(&i2c->adap, &i2c->alert_data);
+	if (IS_ERR(ara))
+		return PTR_ERR(ara);
+
+	i2c->ara = ara;
+
+	return 0;
+}
+
+static int thunder_i2c_smbus_setup(struct octeon_i2c *i2c,
+				   struct device_node *node)
+{
+	/* TODO: ACPI support */
+	if (!acpi_disabled)
+		return -EOPNOTSUPP;
+
+	return thunder_i2c_smbus_setup_of(i2c, node);
+}
+
+static void thunder_i2c_smbus_remove(struct octeon_i2c *i2c)
+{
+	i2c_unregister_device(i2c->ara);
+}
+
+static int thunder_i2c_probe_pci(struct pci_dev *pdev,
+				 const struct pci_device_id *ent)
+{
+	struct device *dev = &pdev->dev;
+	struct octeon_i2c *i2c;
+	int ret;
+
+	i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->roff.sw_twsi = 0x1000;
+	i2c->roff.twsi_int = 0x1010;
+	i2c->roff.sw_twsi_ext = 0x1018;
+
+	i2c->dev = dev;
+	pci_set_drvdata(pdev, i2c);
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pci_request_regions(pdev, DRV_NAME);
+	if (ret)
+		return ret;
+
+	i2c->twsi_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+	if (!i2c->twsi_base)
+		return -EINVAL;
+
+	thunder_i2c_clock_enable(dev, i2c);
+	ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq);
+	if (ret)
+		i2c->twsi_freq = I2C_MAX_STANDARD_MODE_FREQ;
+
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->int_enable = thunder_i2c_int_enable;
+	i2c->int_disable = thunder_i2c_int_disable;
+	i2c->hlc_int_enable = thunder_i2c_hlc_int_enable;
+	i2c->hlc_int_disable = thunder_i2c_hlc_int_disable;
+
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);
+	if (ret < 0)
+		goto error;
+
+	ret = devm_request_irq(dev, pci_irq_vector(pdev, 0), octeon_i2c_isr, 0,
+			       DRV_NAME, i2c);
+	if (ret)
+		goto error;
+
+	ret = octeon_i2c_init_lowlevel(i2c);
+	if (ret)
+		goto error;
+
+	octeon_i2c_set_clock(i2c);
+
+	i2c->adap = thunderx_i2c_ops;
+	i2c->adap.retries = 5;
+	i2c->adap.class = I2C_CLASS_HWMON;
+	i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
+	i2c->adap.dev.parent = dev;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+	i2c->adap.dev.fwnode = dev->fwnode;
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		 "Cavium ThunderX i2c adapter at %s", dev_name(dev));
+	i2c_set_adapdata(&i2c->adap, i2c);
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret)
+		goto error;
+
+	dev_info(i2c->dev, "Probed. Set system clock to %u\n", i2c->sys_freq);
+
+	ret = thunder_i2c_smbus_setup(i2c, pdev->dev.of_node);
+	if (ret)
+		dev_info(dev, "SMBUS alert not active on this bus\n");
+
+	return 0;
+
+error:
+	thunder_i2c_clock_disable(dev, i2c->clk);
+	return ret;
+}
+
+static void thunder_i2c_remove_pci(struct pci_dev *pdev)
+{
+	struct octeon_i2c *i2c = pci_get_drvdata(pdev);
+
+	thunder_i2c_smbus_remove(i2c);
+	thunder_i2c_clock_disable(&pdev->dev, i2c->clk);
+	i2c_del_adapter(&i2c->adap);
+}
+
+static const struct pci_device_id thunder_i2c_pci_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_TWSI) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, thunder_i2c_pci_id_table);
+
+static struct pci_driver thunder_i2c_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= thunder_i2c_pci_id_table,
+	.probe		= thunder_i2c_probe_pci,
+	.remove		= thunder_i2c_remove_pci,
+};
+
+module_pci_driver(thunder_i2c_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fred Martin <fmartin@caviumnetworks.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium ThunderX SOC");