Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 468 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-viperboard.c b/drivers/i2c/busses/i2c-viperboard.c
new file mode 100644
index 000000000..8b5322c3b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-viperboard.c
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Nano River Technologies viperboard i2c master driver
+ *
+ *  (C) 2012 by Lemonage GmbH
+ *  Author: Lars Poeschel <poeschel@lemonage.de>
+ *  All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/viperboard.h>
+
+struct vprbrd_i2c {
+	struct i2c_adapter i2c;
+	u8 bus_freq_param;
+};
+
+/* i2c bus frequency module parameter */
+static u8 i2c_bus_param;
+static unsigned int i2c_bus_freq = 100;
+module_param(i2c_bus_freq, int, 0);
+MODULE_PARM_DESC(i2c_bus_freq,
+	"i2c bus frequency in khz (default is 100) valid values: 10, 100, 200, 400, 1000, 3000, 6000");
+
+static int vprbrd_i2c_status(struct i2c_adapter *i2c,
+	struct vprbrd_i2c_status *status, bool prev_error)
+{
+	u16 bytes_xfer;
+	int ret;
+	struct vprbrd *vb = (struct vprbrd *)i2c->algo_data;
+
+	/* check for protocol error */
+	bytes_xfer = sizeof(struct vprbrd_i2c_status);
+
+	ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0),
+		VPRBRD_USB_REQUEST_I2C, VPRBRD_USB_TYPE_IN, 0x0000, 0x0000,
+		status, bytes_xfer, VPRBRD_USB_TIMEOUT_MS);
+
+	if (ret != bytes_xfer)
+		prev_error = true;
+
+	if (prev_error) {
+		dev_err(&i2c->dev, "failure in usb communication\n");
+		return -EREMOTEIO;
+	}
+
+	dev_dbg(&i2c->dev, "  status = %d\n", status->status);
+	if (status->status != 0x00) {
+		dev_err(&i2c->dev, "failure: i2c protocol error\n");
+		return -EPROTO;
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_receive(struct usb_device *usb_dev,
+	struct vprbrd_i2c_read_msg *rmsg, int bytes_xfer)
+{
+	int ret, bytes_actual;
+	int error = 0;
+
+	/* send the read request */
+	ret = usb_bulk_msg(usb_dev,
+		usb_sndbulkpipe(usb_dev, VPRBRD_EP_OUT), rmsg,
+		sizeof(struct vprbrd_i2c_read_hdr), &bytes_actual,
+		VPRBRD_USB_TIMEOUT_MS);
+
+	if ((ret < 0)
+		|| (bytes_actual != sizeof(struct vprbrd_i2c_read_hdr))) {
+		dev_err(&usb_dev->dev, "failure transmitting usb\n");
+		error = -EREMOTEIO;
+	}
+
+	/* read the actual data */
+	ret = usb_bulk_msg(usb_dev,
+		usb_rcvbulkpipe(usb_dev, VPRBRD_EP_IN), rmsg,
+		bytes_xfer, &bytes_actual, VPRBRD_USB_TIMEOUT_MS);
+
+	if ((ret < 0) || (bytes_xfer != bytes_actual)) {
+		dev_err(&usb_dev->dev, "failure receiving usb\n");
+		error = -EREMOTEIO;
+	}
+	return error;
+}
+
+static int vprbrd_i2c_addr(struct usb_device *usb_dev,
+	struct vprbrd_i2c_addr_msg *amsg)
+{
+	int ret, bytes_actual;
+
+	ret = usb_bulk_msg(usb_dev,
+		usb_sndbulkpipe(usb_dev, VPRBRD_EP_OUT), amsg,
+		sizeof(struct vprbrd_i2c_addr_msg), &bytes_actual,
+		VPRBRD_USB_TIMEOUT_MS);
+
+	if ((ret < 0) ||
+			(sizeof(struct vprbrd_i2c_addr_msg) != bytes_actual)) {
+		dev_err(&usb_dev->dev, "failure transmitting usb\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_read(struct vprbrd *vb, struct i2c_msg *msg)
+{
+	int ret;
+	u16 remain_len, len1, len2, start = 0x0000;
+	struct vprbrd_i2c_read_msg *rmsg =
+		(struct vprbrd_i2c_read_msg *)vb->buf;
+
+	remain_len = msg->len;
+	rmsg->header.cmd = VPRBRD_I2C_CMD_READ;
+	while (remain_len > 0) {
+		rmsg->header.addr = cpu_to_le16(start + 0x4000);
+		if (remain_len <= 255) {
+			len1 = remain_len;
+			len2 = 0x00;
+			rmsg->header.len0 = remain_len;
+			rmsg->header.len1 = 0x00;
+			rmsg->header.len2 = 0x00;
+			rmsg->header.len3 = 0x00;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 510) {
+			len1 = remain_len;
+			len2 = 0x00;
+			rmsg->header.len0 = remain_len - 255;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0x00;
+			rmsg->header.len3 = 0x00;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 512) {
+			len1 = remain_len;
+			len2 = 0x00;
+			rmsg->header.len0 = remain_len - 510;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = 0x00;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 767) {
+			len1 = 512;
+			len2 = remain_len - 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = remain_len - 512;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 1022) {
+			len1 = 512;
+			len2 = remain_len - 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = remain_len - 767;
+			rmsg->header.len4 = 0xff;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 1024) {
+			len1 = 512;
+			len2 = remain_len - 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = remain_len - 1022;
+			rmsg->header.len4 = 0xff;
+			rmsg->header.len5 = 0xff;
+			remain_len = 0;
+		} else {
+			len1 = 512;
+			len2 = 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = 0x02;
+			rmsg->header.len4 = 0xff;
+			rmsg->header.len5 = 0xff;
+			remain_len -= 1024;
+			start += 1024;
+		}
+		rmsg->header.tf1 = cpu_to_le16(len1);
+		rmsg->header.tf2 = cpu_to_le16(len2);
+
+		/* first read transfer */
+		ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len1);
+		if (ret < 0)
+			return ret;
+		/* copy the received data */
+		memcpy(msg->buf + start, rmsg, len1);
+
+		/* second read transfer if neccessary */
+		if (len2 > 0) {
+			ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len2);
+			if (ret < 0)
+				return ret;
+			/* copy the received data */
+			memcpy(msg->buf + start + 512, rmsg, len2);
+		}
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_write(struct vprbrd *vb, struct i2c_msg *msg)
+{
+	int ret, bytes_actual;
+	u16 remain_len, bytes_xfer,
+		start = 0x0000;
+	struct vprbrd_i2c_write_msg *wmsg =
+		(struct vprbrd_i2c_write_msg *)vb->buf;
+
+	remain_len = msg->len;
+	wmsg->header.cmd = VPRBRD_I2C_CMD_WRITE;
+	wmsg->header.last = 0x00;
+	wmsg->header.chan = 0x00;
+	wmsg->header.spi = 0x0000;
+	while (remain_len > 0) {
+		wmsg->header.addr = cpu_to_le16(start + 0x4000);
+		if (remain_len > 503) {
+			wmsg->header.len1 = 0xff;
+			wmsg->header.len2 = 0xf8;
+			remain_len -= 503;
+			bytes_xfer = 503 + sizeof(struct vprbrd_i2c_write_hdr);
+			start += 503;
+		} else if (remain_len > 255) {
+			wmsg->header.len1 = 0xff;
+			wmsg->header.len2 = (remain_len - 255);
+			bytes_xfer = remain_len +
+				sizeof(struct vprbrd_i2c_write_hdr);
+			remain_len = 0;
+		} else {
+			wmsg->header.len1 = remain_len;
+			wmsg->header.len2 = 0x00;
+			bytes_xfer = remain_len +
+				sizeof(struct vprbrd_i2c_write_hdr);
+			remain_len = 0;
+		}
+		memcpy(wmsg->data, msg->buf + start,
+			bytes_xfer - sizeof(struct vprbrd_i2c_write_hdr));
+
+		ret = usb_bulk_msg(vb->usb_dev,
+			usb_sndbulkpipe(vb->usb_dev,
+			VPRBRD_EP_OUT), wmsg,
+			bytes_xfer, &bytes_actual, VPRBRD_USB_TIMEOUT_MS);
+		if ((ret < 0) || (bytes_xfer != bytes_actual))
+			return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_xfer(struct i2c_adapter *i2c, struct i2c_msg *msgs,
+		int num)
+{
+	struct i2c_msg *pmsg;
+	int i, ret,
+		error = 0;
+	struct vprbrd *vb = (struct vprbrd *)i2c->algo_data;
+	struct vprbrd_i2c_addr_msg *amsg =
+		(struct vprbrd_i2c_addr_msg *)vb->buf;
+	struct vprbrd_i2c_status *smsg = (struct vprbrd_i2c_status *)vb->buf;
+
+	dev_dbg(&i2c->dev, "master xfer %d messages:\n", num);
+
+	for (i = 0 ; i < num ; i++) {
+		pmsg = &msgs[i];
+
+		dev_dbg(&i2c->dev,
+			"  %d: %s (flags %d) %d bytes to 0x%02x\n",
+			i, pmsg->flags & I2C_M_RD ? "read" : "write",
+			pmsg->flags, pmsg->len, pmsg->addr);
+
+		mutex_lock(&vb->lock);
+		/* directly send the message */
+		if (pmsg->flags & I2C_M_RD) {
+			/* read data */
+			amsg->cmd = VPRBRD_I2C_CMD_ADDR;
+			amsg->unknown2 = 0x00;
+			amsg->unknown3 = 0x00;
+			amsg->addr = pmsg->addr;
+			amsg->unknown1 = 0x01;
+			amsg->len = cpu_to_le16(pmsg->len);
+			/* send the addr and len, we're interested to board */
+			ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
+			if (ret < 0)
+				error = ret;
+
+			ret = vprbrd_i2c_read(vb, pmsg);
+			if (ret < 0)
+				error = ret;
+
+			ret = vprbrd_i2c_status(i2c, smsg, error);
+			if (ret < 0)
+				error = ret;
+			/* in case of protocol error, return the error */
+			if (error < 0)
+				goto error;
+		} else {
+			/* write data */
+			ret = vprbrd_i2c_write(vb, pmsg);
+
+			amsg->cmd = VPRBRD_I2C_CMD_ADDR;
+			amsg->unknown2 = 0x00;
+			amsg->unknown3 = 0x00;
+			amsg->addr = pmsg->addr;
+			amsg->unknown1 = 0x00;
+			amsg->len = cpu_to_le16(pmsg->len);
+			/* send the addr, the data goes to to board */
+			ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
+			if (ret < 0)
+				error = ret;
+
+			ret = vprbrd_i2c_status(i2c, smsg, error);
+			if (ret < 0)
+				error = ret;
+
+			if (error < 0)
+				goto error;
+		}
+		mutex_unlock(&vb->lock);
+	}
+	return num;
+error:
+	mutex_unlock(&vb->lock);
+	return error;
+}
+
+static u32 vprbrd_i2c_func(struct i2c_adapter *i2c)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+/* This is the actual algorithm we define */
+static const struct i2c_algorithm vprbrd_algorithm = {
+	.master_xfer	= vprbrd_i2c_xfer,
+	.functionality	= vprbrd_i2c_func,
+};
+
+static const struct i2c_adapter_quirks vprbrd_quirks = {
+	.max_read_len = 2048,
+	.max_write_len = 2048,
+};
+
+static int vprbrd_i2c_probe(struct platform_device *pdev)
+{
+	struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent);
+	struct vprbrd_i2c *vb_i2c;
+	int ret;
+	int pipe;
+
+	vb_i2c = devm_kzalloc(&pdev->dev, sizeof(*vb_i2c), GFP_KERNEL);
+	if (vb_i2c == NULL)
+		return -ENOMEM;
+
+	/* setup i2c adapter description */
+	vb_i2c->i2c.owner = THIS_MODULE;
+	vb_i2c->i2c.class = I2C_CLASS_HWMON;
+	vb_i2c->i2c.algo = &vprbrd_algorithm;
+	vb_i2c->i2c.quirks = &vprbrd_quirks;
+	vb_i2c->i2c.algo_data = vb;
+	/* save the param in usb capabable memory */
+	vb_i2c->bus_freq_param = i2c_bus_param;
+
+	snprintf(vb_i2c->i2c.name, sizeof(vb_i2c->i2c.name),
+		 "viperboard at bus %03d device %03d",
+		 vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
+
+	/* setting the bus frequency */
+	if ((i2c_bus_param <= VPRBRD_I2C_FREQ_10KHZ)
+		&& (i2c_bus_param >= VPRBRD_I2C_FREQ_6MHZ)) {
+		pipe = usb_sndctrlpipe(vb->usb_dev, 0);
+		ret = usb_control_msg(vb->usb_dev, pipe,
+			VPRBRD_USB_REQUEST_I2C_FREQ, VPRBRD_USB_TYPE_OUT,
+			0x0000, 0x0000, &vb_i2c->bus_freq_param, 1,
+			VPRBRD_USB_TIMEOUT_MS);
+		if (ret != 1) {
+			dev_err(&pdev->dev, "failure setting i2c_bus_freq to %d\n",
+				i2c_bus_freq);
+			return -EIO;
+		}
+	} else {
+		dev_err(&pdev->dev,
+			"invalid i2c_bus_freq setting:%d\n", i2c_bus_freq);
+		return -EIO;
+	}
+
+	vb_i2c->i2c.dev.parent = &pdev->dev;
+
+	/* attach to i2c layer */
+	i2c_add_adapter(&vb_i2c->i2c);
+
+	platform_set_drvdata(pdev, vb_i2c);
+
+	return 0;
+}
+
+static int vprbrd_i2c_remove(struct platform_device *pdev)
+{
+	struct vprbrd_i2c *vb_i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&vb_i2c->i2c);
+
+	return 0;
+}
+
+static struct platform_driver vprbrd_i2c_driver = {
+	.driver.name	= "viperboard-i2c",
+	.driver.owner	= THIS_MODULE,
+	.probe		= vprbrd_i2c_probe,
+	.remove		= vprbrd_i2c_remove,
+};
+
+static int __init vprbrd_i2c_init(void)
+{
+	switch (i2c_bus_freq) {
+	case 6000:
+		i2c_bus_param = VPRBRD_I2C_FREQ_6MHZ;
+		break;
+	case 3000:
+		i2c_bus_param = VPRBRD_I2C_FREQ_3MHZ;
+		break;
+	case 1000:
+		i2c_bus_param = VPRBRD_I2C_FREQ_1MHZ;
+		break;
+	case 400:
+		i2c_bus_param = VPRBRD_I2C_FREQ_400KHZ;
+		break;
+	case 200:
+		i2c_bus_param = VPRBRD_I2C_FREQ_200KHZ;
+		break;
+	case 100:
+		i2c_bus_param = VPRBRD_I2C_FREQ_100KHZ;
+		break;
+	case 10:
+		i2c_bus_param = VPRBRD_I2C_FREQ_10KHZ;
+		break;
+	default:
+		pr_warn("invalid i2c_bus_freq (%d)\n", i2c_bus_freq);
+		i2c_bus_param = VPRBRD_I2C_FREQ_100KHZ;
+	}
+
+	return platform_driver_register(&vprbrd_i2c_driver);
+}
+subsys_initcall(vprbrd_i2c_init);
+
+static void __exit vprbrd_i2c_exit(void)
+{
+	platform_driver_unregister(&vprbrd_i2c_driver);
+}
+module_exit(vprbrd_i2c_exit);
+
+MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>");
+MODULE_DESCRIPTION("I2C master driver for Nano River Techs Viperboard");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:viperboard-i2c");