Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 215 insertions, 0 deletions

diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c
new file mode 100644
index 000000000..bce6b796e
--- /dev/null
+++ b/drivers/i2c/i2c-core-of.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Linux I2C core OF support code
+ *
+ * Copyright (C) 2008 Jochen Friedrich <jochen@scram.de>
+ * based on a previous patch from Jon Smirl <jonsmirl@gmail.com>
+ *
+ * Copyright (C) 2013, 2018 Wolfram Sang <wsa@kernel.org>
+ */
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/sysfs.h>
+
+#include "i2c-core.h"
+
+int of_i2c_get_board_info(struct device *dev, struct device_node *node,
+			  struct i2c_board_info *info)
+{
+	u32 addr;
+	int ret;
+
+	memset(info, 0, sizeof(*info));
+
+	if (of_modalias_node(node, info->type, sizeof(info->type)) < 0) {
+		dev_err(dev, "of_i2c: modalias failure on %pOF\n", node);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(node, "reg", &addr);
+	if (ret) {
+		dev_err(dev, "of_i2c: invalid reg on %pOF\n", node);
+		return ret;
+	}
+
+	if (addr & I2C_TEN_BIT_ADDRESS) {
+		addr &= ~I2C_TEN_BIT_ADDRESS;
+		info->flags |= I2C_CLIENT_TEN;
+	}
+
+	if (addr & I2C_OWN_SLAVE_ADDRESS) {
+		addr &= ~I2C_OWN_SLAVE_ADDRESS;
+		info->flags |= I2C_CLIENT_SLAVE;
+	}
+
+	info->addr = addr;
+	info->of_node = node;
+	info->fwnode = of_fwnode_handle(node);
+
+	if (of_property_read_bool(node, "host-notify"))
+		info->flags |= I2C_CLIENT_HOST_NOTIFY;
+
+	if (of_get_property(node, "wakeup-source", NULL))
+		info->flags |= I2C_CLIENT_WAKE;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_i2c_get_board_info);
+
+static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
+						 struct device_node *node)
+{
+	struct i2c_client *client;
+	struct i2c_board_info info;
+	int ret;
+
+	dev_dbg(&adap->dev, "of_i2c: register %pOF\n", node);
+
+	ret = of_i2c_get_board_info(&adap->dev, node, &info);
+	if (ret)
+		return ERR_PTR(ret);
+
+	client = i2c_new_client_device(adap, &info);
+	if (IS_ERR(client))
+		dev_err(&adap->dev, "of_i2c: Failure registering %pOF\n", node);
+
+	return client;
+}
+
+void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+	struct device_node *bus, *node;
+	struct i2c_client *client;
+
+	/* Only register child devices if the adapter has a node pointer set */
+	if (!adap->dev.of_node)
+		return;
+
+	dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
+
+	bus = of_get_child_by_name(adap->dev.of_node, "i2c-bus");
+	if (!bus)
+		bus = of_node_get(adap->dev.of_node);
+
+	for_each_available_child_of_node(bus, node) {
+		if (of_node_test_and_set_flag(node, OF_POPULATED))
+			continue;
+
+		client = of_i2c_register_device(adap, node);
+		if (IS_ERR(client)) {
+			dev_err(&adap->dev,
+				 "Failed to create I2C device for %pOF\n",
+				 node);
+			of_node_clear_flag(node, OF_POPULATED);
+		}
+	}
+
+	of_node_put(bus);
+}
+
+static const struct of_device_id*
+i2c_of_match_device_sysfs(const struct of_device_id *matches,
+				  struct i2c_client *client)
+{
+	const char *name;
+
+	for (; matches->compatible[0]; matches++) {
+		/*
+		 * Adding devices through the i2c sysfs interface provides us
+		 * a string to match which may be compatible with the device
+		 * tree compatible strings, however with no actual of_node the
+		 * of_match_device() will not match
+		 */
+		if (sysfs_streq(client->name, matches->compatible))
+			return matches;
+
+		name = strchr(matches->compatible, ',');
+		if (!name)
+			name = matches->compatible;
+		else
+			name++;
+
+		if (sysfs_streq(client->name, name))
+			return matches;
+	}
+
+	return NULL;
+}
+
+const struct of_device_id
+*i2c_of_match_device(const struct of_device_id *matches,
+		     struct i2c_client *client)
+{
+	const struct of_device_id *match;
+
+	if (!(client && matches))
+		return NULL;
+
+	match = of_match_device(matches, &client->dev);
+	if (match)
+		return match;
+
+	return i2c_of_match_device_sysfs(matches, client);
+}
+EXPORT_SYMBOL_GPL(i2c_of_match_device);
+
+#if IS_ENABLED(CONFIG_OF_DYNAMIC)
+static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
+			 void *arg)
+{
+	struct of_reconfig_data *rd = arg;
+	struct i2c_adapter *adap;
+	struct i2c_client *client;
+
+	switch (of_reconfig_get_state_change(action, rd)) {
+	case OF_RECONFIG_CHANGE_ADD:
+		adap = of_find_i2c_adapter_by_node(rd->dn->parent);
+		if (adap == NULL)
+			return NOTIFY_OK;	/* not for us */
+
+		if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
+			put_device(&adap->dev);
+			return NOTIFY_OK;
+		}
+
+		client = of_i2c_register_device(adap, rd->dn);
+		if (IS_ERR(client)) {
+			dev_err(&adap->dev, "failed to create client for '%pOF'\n",
+				 rd->dn);
+			put_device(&adap->dev);
+			of_node_clear_flag(rd->dn, OF_POPULATED);
+			return notifier_from_errno(PTR_ERR(client));
+		}
+		put_device(&adap->dev);
+		break;
+	case OF_RECONFIG_CHANGE_REMOVE:
+		/* already depopulated? */
+		if (!of_node_check_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;
+
+		/* find our device by node */
+		client = of_find_i2c_device_by_node(rd->dn);
+		if (client == NULL)
+			return NOTIFY_OK;	/* no? not meant for us */
+
+		/* unregister takes one ref away */
+		i2c_unregister_device(client);
+
+		/* and put the reference of the find */
+		put_device(&client->dev);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+struct notifier_block i2c_of_notifier = {
+	.notifier_call = of_i2c_notify,
+};
+#endif /* CONFIG_OF_DYNAMIC */