Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 194 insertions, 0 deletions

diff --git a/drivers/i2c/muxes/i2c-mux-mlxcpld.c b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
new file mode 100644
index 000000000..1a879f6a3
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/*
+ * Mellanox i2c mux driver
+ *
+ * Copyright (C) 2016-2020 Mellanox Technologies
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_data/mlxcpld.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* mlxcpld_mux - mux control structure:
+ * @last_val - last selected register value or -1 if mux deselected
+ * @client - I2C device client
+ * @pdata: platform data
+ */
+struct mlxcpld_mux {
+	int last_val;
+	struct i2c_client *client;
+	struct mlxcpld_mux_plat_data pdata;
+};
+
+/* MUX logic description.
+ * Driver can support different mux control logic, according to CPLD
+ * implementation.
+ *
+ * Connectivity schema.
+ *
+ * i2c-mlxcpld                                 Digital               Analog
+ * driver
+ * *--------*                                 * -> mux1 (virt bus2) -> mux -> |
+ * | I2CLPC | i2c physical                    * -> mux2 (virt bus3) -> mux -> |
+ * | bridge | bus 1                 *---------*                               |
+ * | logic  |---------------------> * mux reg *                               |
+ * | in CPLD|                       *---------*                               |
+ * *--------*   i2c-mux-mlxpcld          ^    * -> muxn (virt busn) -> mux -> |
+ *     |        driver                   |                                    |
+ *     |        *---------------*        |                              Devices
+ *     |        * CPLD (i2c bus)* select |
+ *     |        * registers for *--------*
+ *     |        * mux selection * deselect
+ *     |        *---------------*
+ *     |                 |
+ * <-------->     <----------->
+ * i2c cntrl      Board cntrl reg
+ * reg space      space (mux select,
+ *                IO, LED, WD, info)
+ *
+ */
+
+/* Write to mux register. Don't use i2c_transfer() and i2c_smbus_xfer()
+ * for this as they will try to lock adapter a second time.
+ */
+static int mlxcpld_mux_reg_write(struct i2c_adapter *adap,
+				 struct mlxcpld_mux *mux, u32 val)
+{
+	struct i2c_client *client = mux->client;
+	union i2c_smbus_data data;
+	struct i2c_msg msg;
+	u8 buf[3];
+
+	switch (mux->pdata.reg_size) {
+	case 1:
+		data.byte = val;
+		return __i2c_smbus_xfer(adap, client->addr, client->flags,
+					I2C_SMBUS_WRITE, mux->pdata.sel_reg_addr,
+					I2C_SMBUS_BYTE_DATA, &data);
+	case 2:
+		buf[0] = mux->pdata.sel_reg_addr >> 8;
+		buf[1] = mux->pdata.sel_reg_addr;
+		buf[2] = val;
+		msg.addr = client->addr;
+		msg.buf = buf;
+		msg.len = mux->pdata.reg_size + 1;
+		msg.flags = 0;
+		return __i2c_transfer(adap, &msg, 1);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mlxcpld_mux_select_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mlxcpld_mux *mux = i2c_mux_priv(muxc);
+	u32 regval = chan;
+	int err = 0;
+
+	if (mux->pdata.reg_size == 1)
+		regval += 1;
+
+	/* Only select the channel if its different from the last channel */
+	if (mux->last_val != regval) {
+		err = mlxcpld_mux_reg_write(muxc->parent, mux, regval);
+		mux->last_val = err < 0 ? -1 : regval;
+	}
+
+	return err;
+}
+
+static int mlxcpld_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mlxcpld_mux *mux = i2c_mux_priv(muxc);
+
+	/* Deselect active channel */
+	mux->last_val = -1;
+
+	return mlxcpld_mux_reg_write(muxc->parent, mux, 0);
+}
+
+/* Probe/reomove functions */
+static int mlxcpld_mux_probe(struct platform_device *pdev)
+{
+	struct mlxcpld_mux_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct i2c_client *client = to_i2c_client(pdev->dev.parent);
+	struct i2c_mux_core *muxc;
+	struct mlxcpld_mux *data;
+	int num, err;
+	u32 func;
+
+	if (!pdata)
+		return -EINVAL;
+
+	switch (pdata->reg_size) {
+	case 1:
+		func = I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+		break;
+	case 2:
+		func = I2C_FUNC_I2C;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(client->adapter, func))
+		return -ENODEV;
+
+	muxc = i2c_mux_alloc(client->adapter, &pdev->dev, pdata->num_adaps,
+			     sizeof(*data), 0, mlxcpld_mux_select_chan,
+			     mlxcpld_mux_deselect);
+	if (!muxc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, muxc);
+	data = i2c_mux_priv(muxc);
+	data->client = client;
+	memcpy(&data->pdata, pdata, sizeof(*pdata));
+	data->last_val = -1; /* force the first selection */
+
+	/* Create an adapter for each channel. */
+	for (num = 0; num < pdata->num_adaps; num++) {
+		err = i2c_mux_add_adapter(muxc, 0, pdata->chan_ids[num], 0);
+		if (err)
+			goto virt_reg_failed;
+	}
+
+	/* Notify caller when all channels' adapters are created. */
+	if (pdata->completion_notify)
+		pdata->completion_notify(pdata->handle, muxc->parent, muxc->adapter);
+
+	return 0;
+
+virt_reg_failed:
+	i2c_mux_del_adapters(muxc);
+	return err;
+}
+
+static int mlxcpld_mux_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	return 0;
+}
+
+static struct platform_driver mlxcpld_mux_driver = {
+	.driver = {
+		.name = "i2c-mux-mlxcpld",
+	},
+	.probe = mlxcpld_mux_probe,
+	.remove = mlxcpld_mux_remove,
+};
+
+module_platform_driver(mlxcpld_mux_driver);
+
+MODULE_AUTHOR("Michael Shych (michaels@mellanox.com)");
+MODULE_DESCRIPTION("Mellanox I2C-CPLD-MUX driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:i2c-mux-mlxcpld");