Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1468 insertions, 0 deletions

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 000000000..c8c8eb15c
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,1468 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_accel.h"
+
+#define ST_ACCEL_NUMBER_DATA_CHANNELS		3
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR		0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR		0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR		0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G			2
+#define ST_ACCEL_FS_AVL_4G			4
+#define ST_ACCEL_FS_AVL_6G			6
+#define ST_ACCEL_FS_AVL_8G			8
+#define ST_ACCEL_FS_AVL_16G			16
+#define ST_ACCEL_FS_AVL_100G			100
+#define ST_ACCEL_FS_AVL_200G			200
+#define ST_ACCEL_FS_AVL_400G			400
+
+static const struct iio_mount_matrix *
+st_accel_get_mount_matrix(const struct iio_dev *indio_dev,
+			  const struct iio_chan_spec *chan)
+{
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	return &adata->mount_matrix;
+}
+
+static const struct iio_chan_spec_ext_info st_accel_mount_matrix_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, st_accel_get_mount_matrix),
+	{ }
+};
+
+static const struct iio_chan_spec st_accel_8bit_channels[] = {
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 8, 8,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR+1,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 8, 8,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR+1,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 8, 8,
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR+1,
+			st_accel_mount_matrix_ext_info),
+	IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR,
+			st_accel_mount_matrix_ext_info),
+	IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensor_settings st_accel_sensors_settings[] = {
+	{
+		.wai = 0x33,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LIS3DH_ACCEL_DEV_NAME,
+			[1] = LSM303DLHC_ACCEL_DEV_NAME,
+			[2] = LSM330D_ACCEL_DEV_NAME,
+			[3] = LSM330DL_ACCEL_DEV_NAME,
+			[4] = LSM330DLC_ACCEL_DEV_NAME,
+			[5] = LSM303AGR_ACCEL_DEV_NAME,
+			[6] = LIS2DH12_ACCEL_DEV_NAME,
+			[7] = LIS3DE_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.odr_avl = {
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 10, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+				{ .hz = 400, .value = 0x07, },
+				{ .hz = 1600, .value = 0x08, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1000),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(2000),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(4000),
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(12000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = 0x80,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
+			.addr_ihl = 0x25,
+			.mask_ihl = 0x02,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		.wai = 0x32,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LIS331DLH_ACCEL_DEV_NAME,
+			[1] = LSM303DL_ACCEL_DEV_NAME,
+			[2] = LSM303DLH_ACCEL_DEV_NAME,
+			[3] = LSM303DLM_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0x18,
+			.odr_avl = {
+				{ .hz = 50, .value = 0x00, },
+				{ .hz = 100, .value = 0x01, },
+				{ .hz = 400, .value = 0x02, },
+				{ .hz = 1000, .value = 0x03, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xe0,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1000),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(2000),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(3900),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = 0x80,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x02,
+				.addr_od = 0x22,
+				.mask_od = 0x40,
+			},
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x10,
+				.addr_od = 0x22,
+				.mask_od = 0x40,
+			},
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		.wai = 0x40,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LSM330_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.odr_avl = {
+				{ .hz = 3, .value = 0x01, },
+				{ .hz = 6, .value = 0x02, },
+				{ .hz = 12, .value = 0x03, },
+				{ .hz = 25, .value = 0x04, },
+				{ .hz = 50, .value = 0x05, },
+				{ .hz = 100, .value = 0x06, },
+				{ .hz = 200, .value = 0x07, },
+				{ .hz = 400, .value = 0x08, },
+				{ .hz = 800, .value = 0x09, },
+				{ .hz = 1600, .value = 0x0a, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x24,
+			.mask = 0x38,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(61),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(122),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_6G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(183),
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(244),
+				},
+				[4] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = 0x04,
+					.gain = IIO_G_TO_M_S_2(732),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x20,
+			.mask = 0x08,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x23,
+				.mask = 0x80,
+			},
+			.addr_ihl = 0x23,
+			.mask_ihl = 0x40,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+			.ig1 = {
+				.en_addr = 0x23,
+				.en_mask = 0x08,
+			},
+		},
+		.sim = {
+			.addr = 0x24,
+			.value = BIT(0),
+		},
+		.multi_read_bit = false,
+		.bootime = 2,
+	},
+	{
+		.wai = 0x3a,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LIS3LV02DL_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0x30, /* DF1 and DF0 */
+			.odr_avl = {
+				{ .hz = 40, .value = 0x00, },
+				{ .hz = 160, .value = 0x01, },
+				{ .hz = 640, .value = 0x02, },
+				{ .hz = 2560, .value = 0x03, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xc0,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x21,
+			.mask = 0x80,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1000),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_6G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(3000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x21,
+			.mask = 0x40,
+		},
+		/*
+		 * Data Alignment Setting - needs to be set to get
+		 * left-justified data like all other sensors.
+		 */
+		.das = {
+			.addr = 0x21,
+			.mask = 0x01,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x21,
+				.mask = 0x04,
+			},
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(1),
+		},
+		.multi_read_bit = true,
+		.bootime = 2, /* guess */
+	},
+	{
+		.wai = 0x3b,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LIS331DL_ACCEL_DEV_NAME,
+			[1] = LIS302DL_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0x80,
+			.odr_avl = {
+				{ .hz = 100, .value = 0x00, },
+				{ .hz = 400, .value = 0x01, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0x40,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x20,
+			.mask = 0x20,
+			/*
+			 * TODO: check these resulting gain settings, these are
+			 * not in the datsheet
+			 */
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(18000),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(72000),
+				},
+			},
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x04,
+				.addr_od = 0x22,
+				.mask_od = 0x40,
+			},
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x20,
+				.addr_od = 0x22,
+				.mask_od = 0x40,
+			},
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(7),
+		},
+		.multi_read_bit = false,
+		.bootime = 2, /* guess */
+	},
+	{
+		.wai = 0x32,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = H3LIS331DL_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0x18,
+			.odr_avl = {
+				{ .hz = 50, .value = 0x00, },
+				{ .hz = 100, .value = 0x01, },
+				{ .hz = 400, .value = 0x02, },
+				{ .hz = 1000, .value = 0x03, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0x20,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_100G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(49000),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_200G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(98000),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_400G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(195000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = 0x80,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x02,
+			},
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		/* No WAI register present */
+		.sensors_supported = {
+			[0] = LIS3L02DQ_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0x30,
+			.odr_avl = {
+				{ .hz = 280, .value = 0x00, },
+				{ .hz = 560, .value = 0x01, },
+				{ .hz = 1120, .value = 0x02, },
+				{ .hz = 4480, .value = 0x03, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xc0,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.gain = IIO_G_TO_M_S_2(488),
+				},
+			},
+		},
+		/*
+		 * The part has a BDU bit but if set the data is never
+		 * updated so don't set it.
+		 */
+		.bdu = {
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x21,
+				.mask = 0x04,
+			},
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(1),
+		},
+		.multi_read_bit = false,
+		.bootime = 2,
+	},
+	{
+		.wai = 0x33,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LNG2DM_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.odr_avl = {
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 10, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+				{ .hz = 400, .value = 0x07, },
+				{ .hz = 1600, .value = 0x08, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(15600),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(31200),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(62500),
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(187500),
+				},
+			},
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
+			.addr_ihl = 0x25,
+			.mask_ihl = 0x02,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		.wai = 0x44,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LIS2DW12_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.odr_avl = {
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 12, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.fs = {
+			.addr = 0x25,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(976),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(1952),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(3904),
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(7808),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x21,
+			.mask = 0x08,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x23,
+				.mask = 0x01,
+				.addr_od = 0x22,
+				.mask_od = 0x20,
+			},
+			.int2 = {
+				.addr = 0x24,
+				.mask = 0x01,
+				.addr_od = 0x22,
+				.mask_od = 0x20,
+			},
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x08,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x01,
+			},
+		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(0),
+		},
+		.multi_read_bit = false,
+		.bootime = 2,
+	},
+	{
+		.wai = 0x11,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LIS3DHH_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+		.odr = {
+			/* just ODR = 1100Hz available */
+			.odr_avl = {
+				{ .hz = 1100, .value = 0x00, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0x80,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.fs = {
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.gain = IIO_G_TO_M_S_2(76),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x20,
+			.mask = 0x01,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x21,
+				.mask = 0x80,
+				.addr_od = 0x23,
+				.mask_od = 0x04,
+			},
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x80,
+				.addr_od = 0x23,
+				.mask_od = 0x08,
+			},
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.multi_read_bit = false,
+		.bootime = 2,
+	},
+	{
+		.wai = 0x33,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LIS2DE12_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.odr_avl = {
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 10, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+				{ .hz = 400, .value = 0x07, },
+				{ .hz = 1620, .value = 0x08, },
+				{ .hz = 5376, .value = 0x09, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(15600),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(31200),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(62500),
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(187500),
+				},
+			},
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
+			.addr_ihl = 0x25,
+			.mask_ihl = 0x02,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		.wai = 0x41,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LIS2HH12_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0x70,
+			.odr_avl = {
+				{ .hz = 10, .value = 0x01, },
+				{ .hz = 50, .value = 0x02, },
+				{ .hz = 100, .value = 0x03, },
+				{ .hz = 200, .value = 0x04, },
+				{ .hz = 400, .value = 0x05, },
+				{ .hz = 800, .value = 0x06, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0x70,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(61),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(122),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(244),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x20,
+			.mask = 0x08,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x01,
+			},
+			.int2 = {
+				.addr = 0x25,
+				.mask = 0x01,
+			},
+			.addr_ihl = 0x24,
+			.mask_ihl = 0x02,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		.wai = 0x49,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LSM9DS0_IMU_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = GENMASK(7, 4),
+			.odr_avl = {
+				{ 3, 0x01, },
+				{ 6, 0x02, },
+				{ 12, 0x03, },
+				{ 25, 0x04, },
+				{ 50, 0x05, },
+				{ 100, 0x06, },
+				{ 200, 0x07, },
+				{ 400, 0x08, },
+				{ 800, 0x09, },
+				{ 1600, 0x0a, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = GENMASK(7, 4),
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x21,
+			.mask = GENMASK(5, 3),
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(61),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(122),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_6G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(183),
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(244),
+				},
+				[4] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = 0x04,
+					.gain = IIO_G_TO_M_S_2(732),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x20,
+			.mask = BIT(3),
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = BIT(2),
+			},
+			.int2 = {
+				.addr = 0x23,
+				.mask = BIT(3),
+			},
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = GENMASK(2, 0),
+			},
+		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		/*
+		 * Not an ST part. Register-compatible with the LIS2DH, even
+		 * though the WAI value is different.
+		 */
+		.wai = 0x11,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = SC7A20_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.odr_avl = {
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 10, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+				{ .hz = 400, .value = 0x07, },
+				{ .hz = 1600, .value = 0x08, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1000),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(2000),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(4000),
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(12000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = 0x80,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
+			.addr_ihl = 0x25,
+			.mask_ihl = 0x02,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+};
+
+/* Default accel DRDY is available on INT1 pin */
+static const struct st_sensors_platform_data default_accel_pdata = {
+	.drdy_int_pin = 1,
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *ch, int *val,
+							int *val2, long mask)
+{
+	int err;
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		err = st_sensors_read_info_raw(indio_dev, ch, val);
+		if (err < 0)
+			goto read_error;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = adata->current_fullscale->gain / 1000000;
+		*val2 = adata->current_fullscale->gain % 1000000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = adata->odr;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+
+read_error:
+	return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE: {
+		int gain;
+
+		gain = val * 1000000 + val2;
+		return st_sensors_set_fullscale_by_gain(indio_dev, gain);
+	}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+
+		return st_sensors_set_odr(indio_dev, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available);
+
+static struct attribute *st_accel_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+	.attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+	.attrs = &st_accel_attribute_group,
+	.read_raw = &st_accel_read_raw,
+	.write_raw = &st_accel_write_raw,
+	.debugfs_reg_access = &st_sensors_debugfs_reg_access,
+};
+
+#ifdef CONFIG_IIO_TRIGGER
+static const struct iio_trigger_ops st_accel_trigger_ops = {
+	.set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
+	.validate_device = st_sensors_validate_device,
+};
+#define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
+#else
+#define ST_ACCEL_TRIGGER_OPS NULL
+#endif
+
+#ifdef CONFIG_ACPI
+/* Read ST-specific _ONT orientation data from ACPI and generate an
+ * appropriate mount matrix.
+ */
+static int apply_acpi_orientation(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct acpi_device *adev;
+	union acpi_object *ont;
+	union acpi_object *elements;
+	acpi_status status;
+	int ret = -EINVAL;
+	unsigned int val;
+	int i, j;
+	int final_ont[3][3] = { { 0 }, };
+
+	/* For some reason, ST's _ONT translation does not apply directly
+	 * to the data read from the sensor. Another translation must be
+	 * performed first, as described by the matrix below. Perhaps
+	 * ST required this specific translation for the first product
+	 * where the device was mounted?
+	 */
+	const int default_ont[3][3] = {
+		{  0,  1,  0 },
+		{ -1,  0,  0 },
+		{  0,  0, -1 },
+	};
+
+
+	adev = ACPI_COMPANION(indio_dev->dev.parent);
+	if (!adev)
+		return 0;
+
+	/* Read _ONT data, which should be a package of 6 integers. */
+	status = acpi_evaluate_object(adev->handle, "_ONT", NULL, &buffer);
+	if (status == AE_NOT_FOUND) {
+		return 0;
+	} else if (ACPI_FAILURE(status)) {
+		dev_warn(&indio_dev->dev, "failed to execute _ONT: %d\n",
+			 status);
+		return status;
+	}
+
+	ont = buffer.pointer;
+	if (ont->type != ACPI_TYPE_PACKAGE || ont->package.count != 6)
+		goto out;
+
+	/* The first 3 integers provide axis order information.
+	 * e.g. 0 1 2 would indicate normal X,Y,Z ordering.
+	 * e.g. 1 0 2 indicates that data arrives in order Y,X,Z.
+	 */
+	elements = ont->package.elements;
+	for (i = 0; i < 3; i++) {
+		if (elements[i].type != ACPI_TYPE_INTEGER)
+			goto out;
+
+		val = elements[i].integer.value;
+		if (val > 2)
+			goto out;
+
+		/* Avoiding full matrix multiplication, we simply reorder the
+		 * columns in the default_ont matrix according to the
+		 * ordering provided by _ONT.
+		 */
+		final_ont[0][i] = default_ont[0][val];
+		final_ont[1][i] = default_ont[1][val];
+		final_ont[2][i] = default_ont[2][val];
+	}
+
+	/* The final 3 integers provide sign flip information.
+	 * 0 means no change, 1 means flip.
+	 * e.g. 0 0 1 means that Z data should be sign-flipped.
+	 * This is applied after the axis reordering from above.
+	 */
+	elements += 3;
+	for (i = 0; i < 3; i++) {
+		if (elements[i].type != ACPI_TYPE_INTEGER)
+			goto out;
+
+		val = elements[i].integer.value;
+		if (val != 0 && val != 1)
+			goto out;
+		if (!val)
+			continue;
+
+		/* Flip the values in the indicated column */
+		final_ont[0][i] *= -1;
+		final_ont[1][i] *= -1;
+		final_ont[2][i] *= -1;
+	}
+
+	/* Convert our integer matrix to a string-based iio_mount_matrix */
+	for (i = 0; i < 3; i++) {
+		for (j = 0; j < 3; j++) {
+			int matrix_val = final_ont[i][j];
+			char *str_value;
+
+			switch (matrix_val) {
+			case -1:
+				str_value = "-1";
+				break;
+			case 0:
+				str_value = "0";
+				break;
+			case 1:
+				str_value = "1";
+				break;
+			default:
+				goto out;
+			}
+			adata->mount_matrix.rotation[i * 3 + j] = str_value;
+		}
+	}
+
+	ret = 0;
+	dev_info(&indio_dev->dev, "computed mount matrix from ACPI\n");
+
+out:
+	kfree(buffer.pointer);
+	if (ret)
+		dev_dbg(&indio_dev->dev,
+			"failed to apply ACPI orientation data: %d\n", ret);
+
+	return ret;
+}
+#else /* !CONFIG_ACPI */
+static int apply_acpi_orientation(struct iio_dev *indio_dev)
+{
+	return -EINVAL;
+}
+#endif
+
+/*
+ * st_accel_get_settings() - get sensor settings from device name
+ * @name: device name buffer reference.
+ *
+ * Return: valid reference on success, NULL otherwise.
+ */
+const struct st_sensor_settings *st_accel_get_settings(const char *name)
+{
+	int index = st_sensors_get_settings_index(name,
+					st_accel_sensors_settings,
+					ARRAY_SIZE(st_accel_sensors_settings));
+	if (index < 0)
+		return NULL;
+
+	return &st_accel_sensors_settings[index];
+}
+EXPORT_SYMBOL_NS(st_accel_get_settings, IIO_ST_SENSORS);
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+	struct device *parent = indio_dev->dev.parent;
+	struct st_sensors_platform_data *pdata = dev_get_platdata(parent);
+	int err;
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &accel_info;
+
+	err = st_sensors_verify_id(indio_dev);
+	if (err < 0)
+		return err;
+
+	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
+	indio_dev->channels = adata->sensor_settings->ch;
+	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+	/*
+	 * First try specific ACPI methods to retrieve orientation then try the
+	 * generic function.
+	 */
+	err = apply_acpi_orientation(indio_dev);
+	if (err) {
+		err = iio_read_mount_matrix(parent, &adata->mount_matrix);
+		if (err)
+			return err;
+	}
+
+	adata->current_fullscale = &adata->sensor_settings->fs.fs_avl[0];
+	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
+
+	if (!pdata)
+		pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
+
+	err = st_sensors_init_sensor(indio_dev, pdata);
+	if (err < 0)
+		return err;
+
+	err = st_accel_allocate_ring(indio_dev);
+	if (err < 0)
+		return err;
+
+	if (adata->irq > 0) {
+		err = st_sensors_allocate_trigger(indio_dev,
+						 ST_ACCEL_TRIGGER_OPS);
+		if (err < 0)
+			return err;
+	}
+
+	return devm_iio_device_register(parent, indio_dev);
+}
+EXPORT_SYMBOL_NS(st_accel_common_probe, IIO_ST_SENSORS);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ST_SENSORS);