Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 719 insertions, 0 deletions

diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
new file mode 100644
index 000000000..dd6b603f6
--- /dev/null
+++ b/drivers/iio/adc/ad7606.c
@@ -0,0 +1,719 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7606 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include "ad7606.h"
+
+/*
+ * Scales are computed as 5000/32768 and 10000/32768 respectively,
+ * so that when applied to the raw values they provide mV values
+ */
+static const unsigned int ad7606_scale_avail[2] = {
+	152588, 305176
+};
+
+
+static const unsigned int ad7616_sw_scale_avail[3] = {
+	76293, 152588, 305176
+};
+
+static const unsigned int ad7606_oversampling_avail[7] = {
+	1, 2, 4, 8, 16, 32, 64,
+};
+
+static const unsigned int ad7616_oversampling_avail[8] = {
+	1, 2, 4, 8, 16, 32, 64, 128,
+};
+
+static int ad7606_reset(struct ad7606_state *st)
+{
+	if (st->gpio_reset) {
+		gpiod_set_value(st->gpio_reset, 1);
+		ndelay(100); /* t_reset >= 100ns */
+		gpiod_set_value(st->gpio_reset, 0);
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static int ad7606_reg_access(struct iio_dev *indio_dev,
+			     unsigned int reg,
+			     unsigned int writeval,
+			     unsigned int *readval)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+	if (readval) {
+		ret = st->bops->reg_read(st, reg);
+		if (ret < 0)
+			goto err_unlock;
+		*readval = ret;
+		ret = 0;
+	} else {
+		ret = st->bops->reg_write(st, reg, writeval);
+	}
+err_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static int ad7606_read_samples(struct ad7606_state *st)
+{
+	unsigned int num = st->chip_info->num_channels - 1;
+	u16 *data = st->data;
+	int ret;
+
+	/*
+	 * The frstdata signal is set to high while and after reading the sample
+	 * of the first channel and low for all other channels. This can be used
+	 * to check that the incoming data is correctly aligned. During normal
+	 * operation the data should never become unaligned, but some glitch or
+	 * electrostatic discharge might cause an extra read or clock cycle.
+	 * Monitoring the frstdata signal allows to recover from such failure
+	 * situations.
+	 */
+
+	if (st->gpio_frstdata) {
+		ret = st->bops->read_block(st->dev, 1, data);
+		if (ret)
+			return ret;
+
+		if (!gpiod_get_value(st->gpio_frstdata)) {
+			ad7606_reset(st);
+			return -EIO;
+		}
+
+		data++;
+		num--;
+	}
+
+	return st->bops->read_block(st->dev, num, data);
+}
+
+static irqreturn_t ad7606_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = ad7606_read_samples(st);
+	if (ret == 0)
+		iio_push_to_buffers_with_timestamp(indio_dev, st->data,
+						   iio_get_time_ns(indio_dev));
+
+	iio_trigger_notify_done(indio_dev->trig);
+	/* The rising edge of the CONVST signal starts a new conversion. */
+	gpiod_set_value(st->gpio_convst, 1);
+
+	mutex_unlock(&st->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	gpiod_set_value(st->gpio_convst, 1);
+	ret = wait_for_completion_timeout(&st->completion,
+					  msecs_to_jiffies(1000));
+	if (!ret) {
+		ret = -ETIMEDOUT;
+		goto error_ret;
+	}
+
+	ret = ad7606_read_samples(st);
+	if (ret == 0)
+		ret = st->data[ch];
+
+error_ret:
+	gpiod_set_value(st->gpio_convst, 0);
+
+	return ret;
+}
+
+static int ad7606_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	int ret, ch = 0;
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = ad7606_scan_direct(indio_dev, chan->address);
+		iio_device_release_direct_mode(indio_dev);
+
+		if (ret < 0)
+			return ret;
+		*val = (short)ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (st->sw_mode_en)
+			ch = chan->address;
+		*val = 0;
+		*val2 = st->scale_avail[st->range[ch]];
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*val = st->oversampling;
+		return IIO_VAL_INT;
+	}
+	return -EINVAL;
+}
+
+static ssize_t ad7606_show_avail(char *buf, const unsigned int *vals,
+				 unsigned int n, bool micros)
+{
+	size_t len = 0;
+	int i;
+
+	for (i = 0; i < n; i++) {
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+			micros ? "0.%06u " : "%u ", vals[i]);
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t in_voltage_scale_available_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	return ad7606_show_avail(buf, st->scale_avail, st->num_scales, true);
+}
+
+static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
+
+static int ad7606_write_scale_hw(struct iio_dev *indio_dev, int ch, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	gpiod_set_value(st->gpio_range, val);
+
+	return 0;
+}
+
+static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	DECLARE_BITMAP(values, 3);
+
+	values[0] = val;
+
+	gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
+			      st->gpio_os->info, values);
+
+	/* AD7616 requires a reset to update value */
+	if (st->chip_info->os_req_reset)
+		ad7606_reset(st);
+
+	return 0;
+}
+
+static int ad7606_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int i, ret, ch = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		mutex_lock(&st->lock);
+		i = find_closest(val2, st->scale_avail, st->num_scales);
+		if (st->sw_mode_en)
+			ch = chan->address;
+		ret = st->write_scale(indio_dev, ch, i);
+		if (ret < 0) {
+			mutex_unlock(&st->lock);
+			return ret;
+		}
+		st->range[ch] = i;
+		mutex_unlock(&st->lock);
+
+		return 0;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		if (val2)
+			return -EINVAL;
+		i = find_closest(val, st->oversampling_avail,
+				 st->num_os_ratios);
+		mutex_lock(&st->lock);
+		ret = st->write_os(indio_dev, i);
+		if (ret < 0) {
+			mutex_unlock(&st->lock);
+			return ret;
+		}
+		st->oversampling = st->oversampling_avail[i];
+		mutex_unlock(&st->lock);
+
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static ssize_t ad7606_oversampling_ratio_avail(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	return ad7606_show_avail(buf, st->oversampling_avail,
+				 st->num_os_ratios, false);
+}
+
+static IIO_DEVICE_ATTR(oversampling_ratio_available, 0444,
+		       ad7606_oversampling_ratio_avail, NULL, 0);
+
+static struct attribute *ad7606_attributes_os_and_range[] = {
+	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+	&iio_dev_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_os_and_range = {
+	.attrs = ad7606_attributes_os_and_range,
+};
+
+static struct attribute *ad7606_attributes_os[] = {
+	&iio_dev_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_os = {
+	.attrs = ad7606_attributes_os,
+};
+
+static struct attribute *ad7606_attributes_range[] = {
+	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_range = {
+	.attrs = ad7606_attributes_range,
+};
+
+static const struct iio_chan_spec ad7605_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+	AD7605_CHANNEL(0),
+	AD7605_CHANNEL(1),
+	AD7605_CHANNEL(2),
+	AD7605_CHANNEL(3),
+};
+
+static const struct iio_chan_spec ad7606_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+	AD7606_CHANNEL(0),
+	AD7606_CHANNEL(1),
+	AD7606_CHANNEL(2),
+	AD7606_CHANNEL(3),
+	AD7606_CHANNEL(4),
+	AD7606_CHANNEL(5),
+	AD7606_CHANNEL(6),
+	AD7606_CHANNEL(7),
+};
+
+/*
+ * The current assumption that this driver makes for AD7616, is that it's
+ * working in Hardware Mode with Serial, Burst and Sequencer modes activated.
+ * To activate them, following pins must be pulled high:
+ *	-SER/PAR
+ *	-SEQEN
+ * And following pins must be pulled low:
+ *	-WR/BURST
+ *	-DB4/SER1W
+ */
+static const struct iio_chan_spec ad7616_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(16),
+	AD7606_CHANNEL(0),
+	AD7606_CHANNEL(1),
+	AD7606_CHANNEL(2),
+	AD7606_CHANNEL(3),
+	AD7606_CHANNEL(4),
+	AD7606_CHANNEL(5),
+	AD7606_CHANNEL(6),
+	AD7606_CHANNEL(7),
+	AD7606_CHANNEL(8),
+	AD7606_CHANNEL(9),
+	AD7606_CHANNEL(10),
+	AD7606_CHANNEL(11),
+	AD7606_CHANNEL(12),
+	AD7606_CHANNEL(13),
+	AD7606_CHANNEL(14),
+	AD7606_CHANNEL(15),
+};
+
+static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
+	/* More devices added in future */
+	[ID_AD7605_4] = {
+		.channels = ad7605_channels,
+		.num_channels = 5,
+	},
+	[ID_AD7606_8] = {
+		.channels = ad7606_channels,
+		.num_channels = 9,
+		.oversampling_avail = ad7606_oversampling_avail,
+		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	},
+	[ID_AD7606_6] = {
+		.channels = ad7606_channels,
+		.num_channels = 7,
+		.oversampling_avail = ad7606_oversampling_avail,
+		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	},
+	[ID_AD7606_4] = {
+		.channels = ad7606_channels,
+		.num_channels = 5,
+		.oversampling_avail = ad7606_oversampling_avail,
+		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	},
+	[ID_AD7606B] = {
+		.channels = ad7606_channels,
+		.num_channels = 9,
+		.oversampling_avail = ad7606_oversampling_avail,
+		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	},
+	[ID_AD7616] = {
+		.channels = ad7616_channels,
+		.num_channels = 17,
+		.oversampling_avail = ad7616_oversampling_avail,
+		.oversampling_num = ARRAY_SIZE(ad7616_oversampling_avail),
+		.os_req_reset = true,
+		.init_delay_ms = 15,
+	},
+};
+
+static int ad7606_request_gpios(struct ad7606_state *st)
+{
+	struct device *dev = st->dev;
+
+	st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start",
+					 GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_convst))
+		return PTR_ERR(st->gpio_convst);
+
+	st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_reset))
+		return PTR_ERR(st->gpio_reset);
+
+	st->gpio_range = devm_gpiod_get_optional(dev, "adi,range",
+						 GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_range))
+		return PTR_ERR(st->gpio_range);
+
+	st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
+						   GPIOD_OUT_HIGH);
+	if (IS_ERR(st->gpio_standby))
+		return PTR_ERR(st->gpio_standby);
+
+	st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data",
+						    GPIOD_IN);
+	if (IS_ERR(st->gpio_frstdata))
+		return PTR_ERR(st->gpio_frstdata);
+
+	if (!st->chip_info->oversampling_num)
+		return 0;
+
+	st->gpio_os = devm_gpiod_get_array_optional(dev,
+						    "adi,oversampling-ratio",
+						    GPIOD_OUT_LOW);
+	return PTR_ERR_OR_ZERO(st->gpio_os);
+}
+
+/*
+ * The BUSY signal indicates when conversions are in progress, so when a rising
+ * edge of CONVST is applied, BUSY goes logic high and transitions low at the
+ * end of the entire conversion process. The falling edge of the BUSY signal
+ * triggers this interrupt.
+ */
+static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
+{
+	struct iio_dev *indio_dev = dev_id;
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (iio_buffer_enabled(indio_dev)) {
+		gpiod_set_value(st->gpio_convst, 0);
+		iio_trigger_poll_chained(st->trig);
+	} else {
+		complete(&st->completion);
+	}
+
+	return IRQ_HANDLED;
+};
+
+static int ad7606_validate_trigger(struct iio_dev *indio_dev,
+				   struct iio_trigger *trig)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (st->trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ad7606_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	gpiod_set_value(st->gpio_convst, 1);
+
+	return 0;
+}
+
+static int ad7606_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	gpiod_set_value(st->gpio_convst, 0);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops ad7606_buffer_ops = {
+	.postenable = &ad7606_buffer_postenable,
+	.predisable = &ad7606_buffer_predisable,
+};
+
+static const struct iio_info ad7606_info_no_os_or_range = {
+	.read_raw = &ad7606_read_raw,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_os_and_range = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.attrs = &ad7606_attribute_group_os_and_range,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_os_range_and_debug = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.debugfs_reg_access = &ad7606_reg_access,
+	.attrs = &ad7606_attribute_group_os_and_range,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_os = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.attrs = &ad7606_attribute_group_os,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_range = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.attrs = &ad7606_attribute_group_range,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_trigger_ops ad7606_trigger_ops = {
+	.validate_device = iio_trigger_validate_own_device,
+};
+
+int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
+		 const char *name, unsigned int id,
+		 const struct ad7606_bus_ops *bops)
+{
+	struct ad7606_state *st;
+	int ret;
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+
+	st->dev = dev;
+	mutex_init(&st->lock);
+	st->bops = bops;
+	st->base_address = base_address;
+	/* tied to logic low, analog input range is +/- 5V */
+	st->range[0] = 0;
+	st->oversampling = 1;
+	st->scale_avail = ad7606_scale_avail;
+	st->num_scales = ARRAY_SIZE(ad7606_scale_avail);
+
+	ret = devm_regulator_get_enable(dev, "avcc");
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to enable specified AVcc supply\n");
+
+	st->chip_info = &ad7606_chip_info_tbl[id];
+
+	if (st->chip_info->oversampling_num) {
+		st->oversampling_avail = st->chip_info->oversampling_avail;
+		st->num_os_ratios = st->chip_info->oversampling_num;
+	}
+
+	ret = ad7606_request_gpios(st);
+	if (ret)
+		return ret;
+
+	if (st->gpio_os) {
+		if (st->gpio_range)
+			indio_dev->info = &ad7606_info_os_and_range;
+		else
+			indio_dev->info = &ad7606_info_os;
+	} else {
+		if (st->gpio_range)
+			indio_dev->info = &ad7606_info_range;
+		else
+			indio_dev->info = &ad7606_info_no_os_or_range;
+	}
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = name;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+
+	init_completion(&st->completion);
+
+	ret = ad7606_reset(st);
+	if (ret)
+		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
+
+	/* AD7616 requires al least 15ms to reconfigure after a reset */
+	if (st->chip_info->init_delay_ms) {
+		if (msleep_interruptible(st->chip_info->init_delay_ms))
+			return -ERESTARTSYS;
+	}
+
+	st->write_scale = ad7606_write_scale_hw;
+	st->write_os = ad7606_write_os_hw;
+
+	if (st->bops->sw_mode_config)
+		st->sw_mode_en = device_property_present(st->dev,
+							 "adi,sw-mode");
+
+	if (st->sw_mode_en) {
+		/* Scale of 0.076293 is only available in sw mode */
+		st->scale_avail = ad7616_sw_scale_avail;
+		st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
+
+		/* After reset, in software mode, ±10 V is set by default */
+		memset32(st->range, 2, ARRAY_SIZE(st->range));
+		indio_dev->info = &ad7606_info_os_range_and_debug;
+
+		ret = st->bops->sw_mode_config(indio_dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+					  indio_dev->name,
+					  iio_device_id(indio_dev));
+	if (!st->trig)
+		return -ENOMEM;
+
+	st->trig->ops = &ad7606_trigger_ops;
+	iio_trigger_set_drvdata(st->trig, indio_dev);
+	ret = devm_iio_trigger_register(dev, st->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(st->trig);
+
+	ret = devm_request_threaded_irq(dev, irq,
+					NULL,
+					&ad7606_interrupt,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					name, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      &iio_pollfunc_store_time,
+					      &ad7606_trigger_handler,
+					      &ad7606_buffer_ops);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_NS_GPL(ad7606_probe, IIO_AD7606);
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ad7606_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (st->gpio_standby) {
+		gpiod_set_value(st->gpio_range, 1);
+		gpiod_set_value(st->gpio_standby, 0);
+	}
+
+	return 0;
+}
+
+static int ad7606_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (st->gpio_standby) {
+		gpiod_set_value(st->gpio_range, st->range[0]);
+		gpiod_set_value(st->gpio_standby, 1);
+		ad7606_reset(st);
+	}
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
+EXPORT_SYMBOL_NS_GPL(ad7606_pm_ops, IIO_AD7606);
+
+#endif
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL v2");