Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 548 insertions, 0 deletions

diff --git a/drivers/iio/adc/ti-adc12138.c b/drivers/iio/adc/ti-adc12138.c
new file mode 100644
index 000000000..c0a72d72f
--- /dev/null
+++ b/drivers/iio/adc/ti-adc12138.c
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADC12130/ADC12132/ADC12138 12-bit plus sign ADC driver
+ *
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/adc12138.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/clk.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/regulator/consumer.h>
+
+#define ADC12138_MODE_AUTO_CAL			0x08
+#define ADC12138_MODE_READ_STATUS		0x0c
+#define ADC12138_MODE_ACQUISITION_TIME_6	0x0e
+#define ADC12138_MODE_ACQUISITION_TIME_10	0x4e
+#define ADC12138_MODE_ACQUISITION_TIME_18	0x8e
+#define ADC12138_MODE_ACQUISITION_TIME_34	0xce
+
+#define ADC12138_STATUS_CAL			BIT(6)
+
+enum {
+	adc12130,
+	adc12132,
+	adc12138,
+};
+
+struct adc12138 {
+	struct spi_device *spi;
+	unsigned int id;
+	/* conversion clock */
+	struct clk *cclk;
+	/* positive analog voltage reference */
+	struct regulator *vref_p;
+	/* negative analog voltage reference */
+	struct regulator *vref_n;
+	struct mutex lock;
+	struct completion complete;
+	/* The number of cclk periods for the S/H's acquisition time */
+	unsigned int acquisition_time;
+	/*
+	 * Maximum size needed: 16x 2 bytes ADC data + 8 bytes timestamp.
+	 * Less may be need if not all channels are enabled, as long as
+	 * the 8 byte alignment of the timestamp is maintained.
+	 */
+	__be16 data[20] __aligned(8);
+
+	u8 tx_buf[2] __aligned(IIO_DMA_MINALIGN);
+	u8 rx_buf[2];
+};
+
+#define ADC12138_VOLTAGE_CHANNEL(chan)					\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE)	\
+					| BIT(IIO_CHAN_INFO_OFFSET),	\
+		.scan_index = chan,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 13,					\
+			.storagebits = 16,				\
+			.shift = 3,					\
+			.endianness = IIO_BE,				\
+		},							\
+	}
+
+#define ADC12138_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE)	\
+					| BIT(IIO_CHAN_INFO_OFFSET),	\
+		.scan_index = si,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 13,					\
+			.storagebits = 16,				\
+			.shift = 3,					\
+			.endianness = IIO_BE,				\
+		},							\
+	}
+
+static const struct iio_chan_spec adc12132_channels[] = {
+	ADC12138_VOLTAGE_CHANNEL(0),
+	ADC12138_VOLTAGE_CHANNEL(1),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(0, 1, 2),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(1, 0, 3),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static const struct iio_chan_spec adc12138_channels[] = {
+	ADC12138_VOLTAGE_CHANNEL(0),
+	ADC12138_VOLTAGE_CHANNEL(1),
+	ADC12138_VOLTAGE_CHANNEL(2),
+	ADC12138_VOLTAGE_CHANNEL(3),
+	ADC12138_VOLTAGE_CHANNEL(4),
+	ADC12138_VOLTAGE_CHANNEL(5),
+	ADC12138_VOLTAGE_CHANNEL(6),
+	ADC12138_VOLTAGE_CHANNEL(7),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(1, 0, 9),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(2, 3, 10),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(3, 2, 11),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(4, 5, 12),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(5, 4, 13),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(6, 7, 14),
+	ADC12138_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
+	IIO_CHAN_SOFT_TIMESTAMP(16),
+};
+
+static int adc12138_mode_programming(struct adc12138 *adc, u8 mode,
+				     void *rx_buf, int len)
+{
+	struct spi_transfer xfer = {
+		.tx_buf = adc->tx_buf,
+		.rx_buf = adc->rx_buf,
+		.len = len,
+	};
+	int ret;
+
+	/* Skip unused bits for ADC12130 and ADC12132 */
+	if (adc->id != adc12138)
+		mode = (mode & 0xc0) | ((mode & 0x0f) << 2);
+
+	adc->tx_buf[0] = mode;
+
+	ret = spi_sync_transfer(adc->spi, &xfer, 1);
+	if (ret)
+		return ret;
+
+	memcpy(rx_buf, adc->rx_buf, len);
+
+	return 0;
+}
+
+static int adc12138_read_status(struct adc12138 *adc)
+{
+	u8 rx_buf[2];
+	int ret;
+
+	ret = adc12138_mode_programming(adc, ADC12138_MODE_READ_STATUS,
+					rx_buf, 2);
+	if (ret)
+		return ret;
+
+	return (rx_buf[0] << 1) | (rx_buf[1] >> 7);
+}
+
+static int __adc12138_start_conv(struct adc12138 *adc,
+				 struct iio_chan_spec const *channel,
+				 void *data, int len)
+
+{
+	static const u8 ch_to_mux[] = { 0, 4, 1, 5, 2, 6, 3, 7 };
+	u8 mode = (ch_to_mux[channel->channel] << 4) |
+		  (channel->differential ? 0 : 0x80);
+
+	return adc12138_mode_programming(adc, mode, data, len);
+}
+
+static int adc12138_start_conv(struct adc12138 *adc,
+			       struct iio_chan_spec const *channel)
+{
+	u8 trash;
+
+	return __adc12138_start_conv(adc, channel, &trash, 1);
+}
+
+static int adc12138_start_and_read_conv(struct adc12138 *adc,
+					struct iio_chan_spec const *channel,
+					__be16 *data)
+{
+	return __adc12138_start_conv(adc, channel, data, 2);
+}
+
+static int adc12138_read_conv_data(struct adc12138 *adc, __be16 *value)
+{
+	/* Issue a read status instruction and read previous conversion data */
+	return adc12138_mode_programming(adc, ADC12138_MODE_READ_STATUS,
+					 value, sizeof(*value));
+}
+
+static int adc12138_wait_eoc(struct adc12138 *adc, unsigned long timeout)
+{
+	if (!wait_for_completion_timeout(&adc->complete, timeout))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int adc12138_adc_conversion(struct adc12138 *adc,
+				   struct iio_chan_spec const *channel,
+				   __be16 *value)
+{
+	int ret;
+
+	reinit_completion(&adc->complete);
+
+	ret = adc12138_start_conv(adc, channel);
+	if (ret)
+		return ret;
+
+	ret = adc12138_wait_eoc(adc, msecs_to_jiffies(100));
+	if (ret)
+		return ret;
+
+	return adc12138_read_conv_data(adc, value);
+}
+
+static int adc12138_read_raw(struct iio_dev *iio,
+			     struct iio_chan_spec const *channel, int *value,
+			     int *shift, long mask)
+{
+	struct adc12138 *adc = iio_priv(iio);
+	int ret;
+	__be16 data;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		ret = adc12138_adc_conversion(adc, channel, &data);
+		mutex_unlock(&adc->lock);
+		if (ret)
+			return ret;
+
+		*value = sign_extend32(be16_to_cpu(data) >> channel->scan_type.shift,
+				       channel->scan_type.realbits - 1);
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		ret = regulator_get_voltage(adc->vref_p);
+		if (ret < 0)
+			return ret;
+		*value = ret;
+
+		if (!IS_ERR(adc->vref_n)) {
+			ret = regulator_get_voltage(adc->vref_n);
+			if (ret < 0)
+				return ret;
+			*value -= ret;
+		}
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = channel->scan_type.realbits - 1;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_OFFSET:
+		if (!IS_ERR(adc->vref_n)) {
+			*value = regulator_get_voltage(adc->vref_n);
+			if (*value < 0)
+				return *value;
+		} else {
+			*value = 0;
+		}
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info adc12138_info = {
+	.read_raw = adc12138_read_raw,
+};
+
+static int adc12138_init(struct adc12138 *adc)
+{
+	int ret;
+	int status;
+	u8 mode;
+	u8 trash;
+
+	reinit_completion(&adc->complete);
+
+	ret = adc12138_mode_programming(adc, ADC12138_MODE_AUTO_CAL, &trash, 1);
+	if (ret)
+		return ret;
+
+	/* data output at this time has no significance */
+	status = adc12138_read_status(adc);
+	if (status < 0)
+		return status;
+
+	adc12138_wait_eoc(adc, msecs_to_jiffies(100));
+
+	status = adc12138_read_status(adc);
+	if (status & ADC12138_STATUS_CAL) {
+		dev_warn(&adc->spi->dev,
+			"Auto Cal sequence is still in progress: %#x\n",
+			status);
+		return -EIO;
+	}
+
+	switch (adc->acquisition_time) {
+	case 6:
+		mode = ADC12138_MODE_ACQUISITION_TIME_6;
+		break;
+	case 10:
+		mode = ADC12138_MODE_ACQUISITION_TIME_10;
+		break;
+	case 18:
+		mode = ADC12138_MODE_ACQUISITION_TIME_18;
+		break;
+	case 34:
+		mode = ADC12138_MODE_ACQUISITION_TIME_34;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return adc12138_mode_programming(adc, mode, &trash, 1);
+}
+
+static irqreturn_t adc12138_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct adc12138 *adc = iio_priv(indio_dev);
+	__be16 trash;
+	int ret;
+	int scan_index;
+	int i = 0;
+
+	mutex_lock(&adc->lock);
+
+	for_each_set_bit(scan_index, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		const struct iio_chan_spec *scan_chan =
+				&indio_dev->channels[scan_index];
+
+		reinit_completion(&adc->complete);
+
+		ret = adc12138_start_and_read_conv(adc, scan_chan,
+					i ? &adc->data[i - 1] : &trash);
+		if (ret) {
+			dev_warn(&adc->spi->dev,
+				 "failed to start conversion\n");
+			goto out;
+		}
+
+		ret = adc12138_wait_eoc(adc, msecs_to_jiffies(100));
+		if (ret) {
+			dev_warn(&adc->spi->dev, "wait eoc timeout\n");
+			goto out;
+		}
+
+		i++;
+	}
+
+	if (i) {
+		ret = adc12138_read_conv_data(adc, &adc->data[i - 1]);
+		if (ret) {
+			dev_warn(&adc->spi->dev,
+				 "failed to get conversion data\n");
+			goto out;
+		}
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, adc->data,
+					   iio_get_time_ns(indio_dev));
+out:
+	mutex_unlock(&adc->lock);
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t adc12138_eoc_handler(int irq, void *p)
+{
+	struct iio_dev *indio_dev = p;
+	struct adc12138 *adc = iio_priv(indio_dev);
+
+	complete(&adc->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int adc12138_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct adc12138 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	adc->id = spi_get_device_id(spi)->driver_data;
+	mutex_init(&adc->lock);
+	init_completion(&adc->complete);
+
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->info = &adc12138_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	switch (adc->id) {
+	case adc12130:
+	case adc12132:
+		indio_dev->channels = adc12132_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc12132_channels);
+		break;
+	case adc12138:
+		indio_dev->channels = adc12138_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc12138_channels);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = device_property_read_u32(&spi->dev, "ti,acquisition-time",
+				       &adc->acquisition_time);
+	if (ret)
+		adc->acquisition_time = 10;
+
+	adc->cclk = devm_clk_get(&spi->dev, NULL);
+	if (IS_ERR(adc->cclk))
+		return PTR_ERR(adc->cclk);
+
+	adc->vref_p = devm_regulator_get(&spi->dev, "vref-p");
+	if (IS_ERR(adc->vref_p))
+		return PTR_ERR(adc->vref_p);
+
+	adc->vref_n = devm_regulator_get_optional(&spi->dev, "vref-n");
+	if (IS_ERR(adc->vref_n)) {
+		/*
+		 * Assume vref_n is 0V if an optional regulator is not
+		 * specified, otherwise return the error code.
+		 */
+		ret = PTR_ERR(adc->vref_n);
+		if (ret != -ENODEV)
+			return ret;
+	}
+
+	ret = devm_request_irq(&spi->dev, spi->irq, adc12138_eoc_handler,
+			       IRQF_TRIGGER_RISING, indio_dev->name, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(adc->cclk);
+	if (ret)
+		return ret;
+
+	ret = regulator_enable(adc->vref_p);
+	if (ret)
+		goto err_clk_disable;
+
+	if (!IS_ERR(adc->vref_n)) {
+		ret = regulator_enable(adc->vref_n);
+		if (ret)
+			goto err_vref_p_disable;
+	}
+
+	ret = adc12138_init(adc);
+	if (ret)
+		goto err_vref_n_disable;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 adc12138_trigger_handler, NULL);
+	if (ret)
+		goto err_vref_n_disable;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto err_buffer_cleanup;
+
+	return 0;
+err_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+err_vref_n_disable:
+	if (!IS_ERR(adc->vref_n))
+		regulator_disable(adc->vref_n);
+err_vref_p_disable:
+	regulator_disable(adc->vref_p);
+err_clk_disable:
+	clk_disable_unprepare(adc->cclk);
+
+	return ret;
+}
+
+static void adc12138_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct adc12138 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	if (!IS_ERR(adc->vref_n))
+		regulator_disable(adc->vref_n);
+	regulator_disable(adc->vref_p);
+	clk_disable_unprepare(adc->cclk);
+}
+
+static const struct of_device_id adc12138_dt_ids[] = {
+	{ .compatible = "ti,adc12130", },
+	{ .compatible = "ti,adc12132", },
+	{ .compatible = "ti,adc12138", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, adc12138_dt_ids);
+
+static const struct spi_device_id adc12138_id[] = {
+	{ "adc12130", adc12130 },
+	{ "adc12132", adc12132 },
+	{ "adc12138", adc12138 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adc12138_id);
+
+static struct spi_driver adc12138_driver = {
+	.driver = {
+		.name = "adc12138",
+		.of_match_table = adc12138_dt_ids,
+	},
+	.probe = adc12138_probe,
+	.remove = adc12138_remove,
+	.id_table = adc12138_id,
+};
+module_spi_driver(adc12138_driver);
+
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
+MODULE_DESCRIPTION("ADC12130/ADC12132/ADC12138 driver");
+MODULE_LICENSE("GPL v2");