Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 647 insertions, 0 deletions

diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
new file mode 100644
index 000000000..aa3130b33
--- /dev/null
+++ b/drivers/iio/dac/ad5446.c
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AD5446 SPI DAC driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <asm/unaligned.h>
+
+#define MODE_PWRDWN_1k		0x1
+#define MODE_PWRDWN_100k	0x2
+#define MODE_PWRDWN_TRISTATE	0x3
+
+/**
+ * struct ad5446_state - driver instance specific data
+ * @dev:		this device
+ * @chip_info:		chip model specific constants, available modes etc
+ * @reg:		supply regulator
+ * @vref_mv:		actual reference voltage used
+ * @cached_val:		store/retrieve values during power down
+ * @pwr_down_mode:	power down mode (1k, 100k or tristate)
+ * @pwr_down:		true if the device is in power down
+ * @lock:		lock to protect the data buffer during write ops
+ */
+
+struct ad5446_state {
+	struct device		*dev;
+	const struct ad5446_chip_info	*chip_info;
+	struct regulator		*reg;
+	unsigned short			vref_mv;
+	unsigned			cached_val;
+	unsigned			pwr_down_mode;
+	unsigned			pwr_down;
+	struct mutex			lock;
+};
+
+/**
+ * struct ad5446_chip_info - chip specific information
+ * @channel:		channel spec for the DAC
+ * @int_vref_mv:	AD5620/40/60: the internal reference voltage
+ * @write:		chip specific helper function to write to the register
+ */
+
+struct ad5446_chip_info {
+	struct iio_chan_spec	channel;
+	u16			int_vref_mv;
+	int			(*write)(struct ad5446_state *st, unsigned val);
+};
+
+static const char * const ad5446_powerdown_modes[] = {
+	"1kohm_to_gnd", "100kohm_to_gnd", "three_state"
+};
+
+static int ad5446_set_powerdown_mode(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, unsigned int mode)
+{
+	struct ad5446_state *st = iio_priv(indio_dev);
+
+	st->pwr_down_mode = mode + 1;
+
+	return 0;
+}
+
+static int ad5446_get_powerdown_mode(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan)
+{
+	struct ad5446_state *st = iio_priv(indio_dev);
+
+	return st->pwr_down_mode - 1;
+}
+
+static const struct iio_enum ad5446_powerdown_mode_enum = {
+	.items = ad5446_powerdown_modes,
+	.num_items = ARRAY_SIZE(ad5446_powerdown_modes),
+	.get = ad5446_get_powerdown_mode,
+	.set = ad5446_set_powerdown_mode,
+};
+
+static ssize_t ad5446_read_dac_powerdown(struct iio_dev *indio_dev,
+					   uintptr_t private,
+					   const struct iio_chan_spec *chan,
+					   char *buf)
+{
+	struct ad5446_state *st = iio_priv(indio_dev);
+
+	return sysfs_emit(buf, "%d\n", st->pwr_down);
+}
+
+static ssize_t ad5446_write_dac_powerdown(struct iio_dev *indio_dev,
+					    uintptr_t private,
+					    const struct iio_chan_spec *chan,
+					    const char *buf, size_t len)
+{
+	struct ad5446_state *st = iio_priv(indio_dev);
+	unsigned int shift;
+	unsigned int val;
+	bool powerdown;
+	int ret;
+
+	ret = kstrtobool(buf, &powerdown);
+	if (ret)
+		return ret;
+
+	mutex_lock(&st->lock);
+	st->pwr_down = powerdown;
+
+	if (st->pwr_down) {
+		shift = chan->scan_type.realbits + chan->scan_type.shift;
+		val = st->pwr_down_mode << shift;
+	} else {
+		val = st->cached_val;
+	}
+
+	ret = st->chip_info->write(st, val);
+	mutex_unlock(&st->lock);
+
+	return ret ? ret : len;
+}
+
+static const struct iio_chan_spec_ext_info ad5446_ext_info_powerdown[] = {
+	{
+		.name = "powerdown",
+		.read = ad5446_read_dac_powerdown,
+		.write = ad5446_write_dac_powerdown,
+		.shared = IIO_SEPARATE,
+	},
+	IIO_ENUM("powerdown_mode", IIO_SEPARATE, &ad5446_powerdown_mode_enum),
+	IIO_ENUM_AVAILABLE("powerdown_mode", IIO_SHARED_BY_TYPE, &ad5446_powerdown_mode_enum),
+	{ },
+};
+
+#define _AD5446_CHANNEL(bits, storage, _shift, ext) { \
+	.type = IIO_VOLTAGE, \
+	.indexed = 1, \
+	.output = 1, \
+	.channel = 0, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = (bits), \
+		.storagebits = (storage), \
+		.shift = (_shift), \
+		}, \
+	.ext_info = (ext), \
+}
+
+#define AD5446_CHANNEL(bits, storage, shift) \
+	_AD5446_CHANNEL(bits, storage, shift, NULL)
+
+#define AD5446_CHANNEL_POWERDOWN(bits, storage, shift) \
+	_AD5446_CHANNEL(bits, storage, shift, ad5446_ext_info_powerdown)
+
+static int ad5446_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	struct ad5446_state *st = iio_priv(indio_dev);
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		*val = st->cached_val >> chan->scan_type.shift;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = st->vref_mv;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	}
+	return -EINVAL;
+}
+
+static int ad5446_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct ad5446_state *st = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (val >= (1 << chan->scan_type.realbits) || val < 0)
+			return -EINVAL;
+
+		val <<= chan->scan_type.shift;
+		mutex_lock(&st->lock);
+		st->cached_val = val;
+		if (!st->pwr_down)
+			ret = st->chip_info->write(st, val);
+		mutex_unlock(&st->lock);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct iio_info ad5446_info = {
+	.read_raw = ad5446_read_raw,
+	.write_raw = ad5446_write_raw,
+};
+
+static int ad5446_probe(struct device *dev, const char *name,
+			const struct ad5446_chip_info *chip_info)
+{
+	struct ad5446_state *st;
+	struct iio_dev *indio_dev;
+	struct regulator *reg;
+	int ret, voltage_uv = 0;
+
+	reg = devm_regulator_get(dev, "vcc");
+	if (!IS_ERR(reg)) {
+		ret = regulator_enable(reg);
+		if (ret)
+			return ret;
+
+		ret = regulator_get_voltage(reg);
+		if (ret < 0)
+			goto error_disable_reg;
+
+		voltage_uv = ret;
+	}
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_disable_reg;
+	}
+	st = iio_priv(indio_dev);
+	st->chip_info = chip_info;
+
+	dev_set_drvdata(dev, indio_dev);
+	st->reg = reg;
+	st->dev = dev;
+
+	indio_dev->name = name;
+	indio_dev->info = &ad5446_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = &st->chip_info->channel;
+	indio_dev->num_channels = 1;
+
+	mutex_init(&st->lock);
+
+	st->pwr_down_mode = MODE_PWRDWN_1k;
+
+	if (st->chip_info->int_vref_mv)
+		st->vref_mv = st->chip_info->int_vref_mv;
+	else if (voltage_uv)
+		st->vref_mv = voltage_uv / 1000;
+	else
+		dev_warn(dev, "reference voltage unspecified\n");
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_disable_reg;
+
+	return 0;
+
+error_disable_reg:
+	if (!IS_ERR(reg))
+		regulator_disable(reg);
+	return ret;
+}
+
+static void ad5446_remove(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad5446_state *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	if (!IS_ERR(st->reg))
+		regulator_disable(st->reg);
+}
+
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static int ad5446_write(struct ad5446_state *st, unsigned val)
+{
+	struct spi_device *spi = to_spi_device(st->dev);
+	__be16 data = cpu_to_be16(val);
+
+	return spi_write(spi, &data, sizeof(data));
+}
+
+static int ad5660_write(struct ad5446_state *st, unsigned val)
+{
+	struct spi_device *spi = to_spi_device(st->dev);
+	uint8_t data[3];
+
+	put_unaligned_be24(val, &data[0]);
+
+	return spi_write(spi, data, sizeof(data));
+}
+
+/*
+ * ad5446_supported_spi_device_ids:
+ * The AD5620/40/60 parts are available in different fixed internal reference
+ * voltage options. The actual part numbers may look differently
+ * (and a bit cryptic), however this style is used to make clear which
+ * parts are supported here.
+ */
+enum ad5446_supported_spi_device_ids {
+	ID_AD5300,
+	ID_AD5310,
+	ID_AD5320,
+	ID_AD5444,
+	ID_AD5446,
+	ID_AD5450,
+	ID_AD5451,
+	ID_AD5541A,
+	ID_AD5512A,
+	ID_AD5553,
+	ID_AD5600,
+	ID_AD5601,
+	ID_AD5611,
+	ID_AD5621,
+	ID_AD5641,
+	ID_AD5620_2500,
+	ID_AD5620_1250,
+	ID_AD5640_2500,
+	ID_AD5640_1250,
+	ID_AD5660_2500,
+	ID_AD5660_1250,
+	ID_AD5662,
+};
+
+static const struct ad5446_chip_info ad5446_spi_chip_info[] = {
+	[ID_AD5300] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 4),
+		.write = ad5446_write,
+	},
+	[ID_AD5310] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 2),
+		.write = ad5446_write,
+	},
+	[ID_AD5320] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5444] = {
+		.channel = AD5446_CHANNEL(12, 16, 2),
+		.write = ad5446_write,
+	},
+	[ID_AD5446] = {
+		.channel = AD5446_CHANNEL(14, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5450] = {
+		.channel = AD5446_CHANNEL(8, 16, 6),
+		.write = ad5446_write,
+	},
+	[ID_AD5451] = {
+		.channel = AD5446_CHANNEL(10, 16, 4),
+		.write = ad5446_write,
+	},
+	[ID_AD5541A] = {
+		.channel = AD5446_CHANNEL(16, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5512A] = {
+		.channel = AD5446_CHANNEL(12, 16, 4),
+		.write = ad5446_write,
+	},
+	[ID_AD5553] = {
+		.channel = AD5446_CHANNEL(14, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5600] = {
+		.channel = AD5446_CHANNEL(16, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5601] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6),
+		.write = ad5446_write,
+	},
+	[ID_AD5611] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 4),
+		.write = ad5446_write,
+	},
+	[ID_AD5621] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
+		.write = ad5446_write,
+	},
+	[ID_AD5641] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5620_2500] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
+		.int_vref_mv = 2500,
+		.write = ad5446_write,
+	},
+	[ID_AD5620_1250] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
+		.int_vref_mv = 1250,
+		.write = ad5446_write,
+	},
+	[ID_AD5640_2500] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
+		.int_vref_mv = 2500,
+		.write = ad5446_write,
+	},
+	[ID_AD5640_1250] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
+		.int_vref_mv = 1250,
+		.write = ad5446_write,
+	},
+	[ID_AD5660_2500] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
+		.int_vref_mv = 2500,
+		.write = ad5660_write,
+	},
+	[ID_AD5660_1250] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
+		.int_vref_mv = 1250,
+		.write = ad5660_write,
+	},
+	[ID_AD5662] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
+		.write = ad5660_write,
+	},
+};
+
+static const struct spi_device_id ad5446_spi_ids[] = {
+	{"ad5300", ID_AD5300},
+	{"ad5310", ID_AD5310},
+	{"ad5320", ID_AD5320},
+	{"ad5444", ID_AD5444},
+	{"ad5446", ID_AD5446},
+	{"ad5450", ID_AD5450},
+	{"ad5451", ID_AD5451},
+	{"ad5452", ID_AD5444}, /* ad5452 is compatible to the ad5444 */
+	{"ad5453", ID_AD5446}, /* ad5453 is compatible to the ad5446 */
+	{"ad5512a", ID_AD5512A},
+	{"ad5541a", ID_AD5541A},
+	{"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */
+	{"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */
+	{"ad5553", ID_AD5553},
+	{"ad5600", ID_AD5600},
+	{"ad5601", ID_AD5601},
+	{"ad5611", ID_AD5611},
+	{"ad5621", ID_AD5621},
+	{"ad5641", ID_AD5641},
+	{"ad5620-2500", ID_AD5620_2500}, /* AD5620/40/60: */
+	{"ad5620-1250", ID_AD5620_1250}, /* part numbers may look differently */
+	{"ad5640-2500", ID_AD5640_2500},
+	{"ad5640-1250", ID_AD5640_1250},
+	{"ad5660-2500", ID_AD5660_2500},
+	{"ad5660-1250", ID_AD5660_1250},
+	{"ad5662", ID_AD5662},
+	{"dac081s101", ID_AD5300}, /* compatible Texas Instruments chips */
+	{"dac101s101", ID_AD5310},
+	{"dac121s101", ID_AD5320},
+	{"dac7512", ID_AD5320},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad5446_spi_ids);
+
+static const struct of_device_id ad5446_of_ids[] = {
+	{ .compatible = "ti,dac7512" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad5446_of_ids);
+
+static int ad5446_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+
+	return ad5446_probe(&spi->dev, id->name,
+		&ad5446_spi_chip_info[id->driver_data]);
+}
+
+static void ad5446_spi_remove(struct spi_device *spi)
+{
+	ad5446_remove(&spi->dev);
+}
+
+static struct spi_driver ad5446_spi_driver = {
+	.driver = {
+		.name	= "ad5446",
+		.of_match_table = ad5446_of_ids,
+	},
+	.probe		= ad5446_spi_probe,
+	.remove		= ad5446_spi_remove,
+	.id_table	= ad5446_spi_ids,
+};
+
+static int __init ad5446_spi_register_driver(void)
+{
+	return spi_register_driver(&ad5446_spi_driver);
+}
+
+static void ad5446_spi_unregister_driver(void)
+{
+	spi_unregister_driver(&ad5446_spi_driver);
+}
+
+#else
+
+static inline int ad5446_spi_register_driver(void) { return 0; }
+static inline void ad5446_spi_unregister_driver(void) { }
+
+#endif
+
+#if IS_ENABLED(CONFIG_I2C)
+
+static int ad5622_write(struct ad5446_state *st, unsigned val)
+{
+	struct i2c_client *client = to_i2c_client(st->dev);
+	__be16 data = cpu_to_be16(val);
+	int ret;
+
+	ret = i2c_master_send(client, (char *)&data, sizeof(data));
+	if (ret < 0)
+		return ret;
+	if (ret != sizeof(data))
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * ad5446_supported_i2c_device_ids:
+ * The AD5620/40/60 parts are available in different fixed internal reference
+ * voltage options. The actual part numbers may look differently
+ * (and a bit cryptic), however this style is used to make clear which
+ * parts are supported here.
+ */
+enum ad5446_supported_i2c_device_ids {
+	ID_AD5602,
+	ID_AD5612,
+	ID_AD5622,
+};
+
+static const struct ad5446_chip_info ad5446_i2c_chip_info[] = {
+	[ID_AD5602] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 4),
+		.write = ad5622_write,
+	},
+	[ID_AD5612] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 2),
+		.write = ad5622_write,
+	},
+	[ID_AD5622] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 0),
+		.write = ad5622_write,
+	},
+};
+
+static int ad5446_i2c_probe(struct i2c_client *i2c)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
+	return ad5446_probe(&i2c->dev, id->name,
+		&ad5446_i2c_chip_info[id->driver_data]);
+}
+
+static void ad5446_i2c_remove(struct i2c_client *i2c)
+{
+	ad5446_remove(&i2c->dev);
+}
+
+static const struct i2c_device_id ad5446_i2c_ids[] = {
+	{"ad5301", ID_AD5602},
+	{"ad5311", ID_AD5612},
+	{"ad5321", ID_AD5622},
+	{"ad5602", ID_AD5602},
+	{"ad5612", ID_AD5612},
+	{"ad5622", ID_AD5622},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ad5446_i2c_ids);
+
+static struct i2c_driver ad5446_i2c_driver = {
+	.driver = {
+		   .name = "ad5446",
+	},
+	.probe_new = ad5446_i2c_probe,
+	.remove = ad5446_i2c_remove,
+	.id_table = ad5446_i2c_ids,
+};
+
+static int __init ad5446_i2c_register_driver(void)
+{
+	return i2c_add_driver(&ad5446_i2c_driver);
+}
+
+static void __exit ad5446_i2c_unregister_driver(void)
+{
+	i2c_del_driver(&ad5446_i2c_driver);
+}
+
+#else
+
+static inline int ad5446_i2c_register_driver(void) { return 0; }
+static inline void ad5446_i2c_unregister_driver(void) { }
+
+#endif
+
+static int __init ad5446_init(void)
+{
+	int ret;
+
+	ret = ad5446_spi_register_driver();
+	if (ret)
+		return ret;
+
+	ret = ad5446_i2c_register_driver();
+	if (ret) {
+		ad5446_spi_unregister_driver();
+		return ret;
+	}
+
+	return 0;
+}
+module_init(ad5446_init);
+
+static void __exit ad5446_exit(void)
+{
+	ad5446_i2c_unregister_driver();
+	ad5446_spi_unregister_driver();
+}
+module_exit(ad5446_exit);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD5444/AD5446 DAC");
+MODULE_LICENSE("GPL v2");