Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 416 insertions, 0 deletions

diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c
new file mode 100644
index 000000000..ceacd863d
--- /dev/null
+++ b/drivers/iio/gyro/itg3200_core.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * itg3200_core.c -- support InvenSense ITG3200
+ *                   Digital 3-Axis Gyroscope driver
+ *
+ * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
+ * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
+ *
+ * TODO:
+ * - Support digital low pass filter
+ * - Support power management
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/gyro/itg3200.h>
+
+
+int itg3200_write_reg_8(struct iio_dev *indio_dev,
+		u8 reg_address, u8 val)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+
+	return i2c_smbus_write_byte_data(st->i2c, 0x80 | reg_address, val);
+}
+
+int itg3200_read_reg_8(struct iio_dev *indio_dev,
+		u8 reg_address, u8 *val)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(st->i2c, reg_address);
+	if (ret < 0)
+		return ret;
+	*val = ret;
+	return 0;
+}
+
+static int itg3200_read_reg_s16(struct iio_dev *indio_dev, u8 lower_reg_address,
+		int *val)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+	struct i2c_client *client = st->i2c;
+	int ret;
+	s16 out;
+
+	struct i2c_msg msg[2] = {
+		{
+			.addr = client->addr,
+			.flags = client->flags,
+			.len = 1,
+			.buf = (char *)&lower_reg_address,
+		},
+		{
+			.addr = client->addr,
+			.flags = client->flags | I2C_M_RD,
+			.len = 2,
+			.buf = (char *)&out,
+		},
+	};
+
+	lower_reg_address |= 0x80;
+	ret = i2c_transfer(client->adapter, msg, 2);
+	be16_to_cpus(&out);
+	*val = out;
+
+	return (ret == 2) ? 0 : ret;
+}
+
+static int itg3200_read_raw(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan,
+		int *val, int *val2, long info)
+{
+	int ret = 0;
+	u8 reg;
+	u8 regval;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		reg = (u8)chan->address;
+		ret = itg3200_read_reg_s16(indio_dev, reg, val);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		if (chan->type == IIO_TEMP)
+			*val2 = 1000000000/280;
+		else
+			*val2 = 1214142; /* (1 / 14,375) * (PI / 180) */
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		/* Only the temperature channel has an offset */
+		*val = 23000;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &regval);
+		if (ret)
+			return ret;
+
+		*val = (regval & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000;
+
+		ret = itg3200_read_reg_8(indio_dev,
+					 ITG3200_REG_SAMPLE_RATE_DIV,
+					 &regval);
+		if (ret)
+			return ret;
+
+		*val /= regval + 1;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int itg3200_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val,
+			     int val2,
+			     long mask)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+	int ret;
+	u8 t;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val == 0 || val2 != 0)
+			return -EINVAL;
+
+		mutex_lock(&st->lock);
+
+		ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t);
+		if (ret) {
+			mutex_unlock(&st->lock);
+			return ret;
+		}
+		t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1;
+
+		ret = itg3200_write_reg_8(indio_dev,
+					  ITG3200_REG_SAMPLE_RATE_DIV,
+					  t);
+
+		mutex_unlock(&st->lock);
+		return ret;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+/*
+ * Reset device and internal registers to the power-up-default settings
+ * Use the gyro clock as reference, as suggested by the datasheet
+ */
+static int itg3200_reset(struct iio_dev *indio_dev)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+	int ret;
+
+	dev_dbg(&st->i2c->dev, "reset device");
+
+	ret = itg3200_write_reg_8(indio_dev,
+			ITG3200_REG_POWER_MANAGEMENT,
+			ITG3200_RESET);
+	if (ret) {
+		dev_err(&st->i2c->dev, "error resetting device");
+		goto error_ret;
+	}
+
+	/* Wait for PLL (1ms according to datasheet) */
+	udelay(1500);
+
+	ret = itg3200_write_reg_8(indio_dev,
+			ITG3200_REG_IRQ_CONFIG,
+			ITG3200_IRQ_ACTIVE_HIGH |
+			ITG3200_IRQ_PUSH_PULL |
+			ITG3200_IRQ_LATCH_50US_PULSE |
+			ITG3200_IRQ_LATCH_CLEAR_ANY);
+
+	if (ret)
+		dev_err(&st->i2c->dev, "error init device");
+
+error_ret:
+	return ret;
+}
+
+/* itg3200_enable_full_scale() - Disables the digital low pass filter */
+static int itg3200_enable_full_scale(struct iio_dev *indio_dev)
+{
+	u8 val;
+	int ret;
+
+	ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
+	if (ret)
+		goto err_ret;
+
+	val |= ITG3200_DLPF_FS_SEL_2000;
+	return itg3200_write_reg_8(indio_dev, ITG3200_REG_DLPF, val);
+
+err_ret:
+	return ret;
+}
+
+static int itg3200_initial_setup(struct iio_dev *indio_dev)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+	int ret;
+	u8 val;
+
+	ret = itg3200_reset(indio_dev);
+	if (ret)
+		goto err_ret;
+
+	ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val);
+	if (ret)
+		goto err_ret;
+
+	if (((val >> 1) & 0x3f) != 0x34) {
+		dev_err(&st->i2c->dev, "invalid reg value 0x%02x", val);
+		ret = -ENXIO;
+		goto err_ret;
+	}
+
+	ret = itg3200_enable_full_scale(indio_dev);
+err_ret:
+	return ret;
+}
+
+static const struct iio_mount_matrix *
+itg3200_get_mount_matrix(const struct iio_dev *indio_dev,
+			  const struct iio_chan_spec *chan)
+{
+	struct itg3200 *data = iio_priv(indio_dev);
+
+	return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info itg3200_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, itg3200_get_mount_matrix),
+	{ }
+};
+
+#define ITG3200_ST						\
+	{ .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_BE }
+
+#define ITG3200_GYRO_CHAN(_mod) { \
+	.type = IIO_ANGL_VEL, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = ITG3200_REG_GYRO_ ## _mod ## OUT_H, \
+	.scan_index = ITG3200_SCAN_GYRO_ ## _mod, \
+	.scan_type = ITG3200_ST, \
+	.ext_info = itg3200_ext_info, \
+}
+
+static const struct iio_chan_spec itg3200_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.channel2 = IIO_NO_MOD,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = ITG3200_REG_TEMP_OUT_H,
+		.scan_index = ITG3200_SCAN_TEMP,
+		.scan_type = ITG3200_ST,
+	},
+	ITG3200_GYRO_CHAN(X),
+	ITG3200_GYRO_CHAN(Y),
+	ITG3200_GYRO_CHAN(Z),
+	IIO_CHAN_SOFT_TIMESTAMP(ITG3200_SCAN_ELEMENTS),
+};
+
+static const struct iio_info itg3200_info = {
+	.read_raw = &itg3200_read_raw,
+	.write_raw = &itg3200_write_raw,
+};
+
+static const unsigned long itg3200_available_scan_masks[] = { 0xffffffff, 0x0 };
+
+static int itg3200_probe(struct i2c_client *client)
+{
+	int ret;
+	struct itg3200 *st;
+	struct iio_dev *indio_dev;
+
+	dev_dbg(&client->dev, "probe I2C dev with IRQ %i", client->irq);
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	ret = iio_read_mount_matrix(&client->dev, &st->orientation);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, indio_dev);
+	st->i2c = client;
+
+	indio_dev->name = client->dev.driver->name;
+	indio_dev->channels = itg3200_channels;
+	indio_dev->num_channels = ARRAY_SIZE(itg3200_channels);
+	indio_dev->available_scan_masks = itg3200_available_scan_masks;
+	indio_dev->info = &itg3200_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = itg3200_buffer_configure(indio_dev);
+	if (ret)
+		return ret;
+
+	if (client->irq) {
+		ret = itg3200_probe_trigger(indio_dev);
+		if (ret)
+			goto error_unconfigure_buffer;
+	}
+
+	ret = itg3200_initial_setup(indio_dev);
+	if (ret)
+		goto error_remove_trigger;
+
+	mutex_init(&st->lock);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_remove_trigger;
+
+	return 0;
+
+error_remove_trigger:
+	if (client->irq)
+		itg3200_remove_trigger(indio_dev);
+error_unconfigure_buffer:
+	itg3200_buffer_unconfigure(indio_dev);
+	return ret;
+}
+
+static void itg3200_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+
+	if (client->irq)
+		itg3200_remove_trigger(indio_dev);
+
+	itg3200_buffer_unconfigure(indio_dev);
+}
+
+static int itg3200_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct itg3200 *st = iio_priv(indio_dev);
+
+	dev_dbg(&st->i2c->dev, "suspend device");
+
+	return itg3200_write_reg_8(indio_dev, ITG3200_REG_POWER_MANAGEMENT,
+				   ITG3200_SLEEP);
+}
+
+static int itg3200_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+	return itg3200_initial_setup(indio_dev);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(itg3200_pm_ops, itg3200_suspend,
+				itg3200_resume);
+
+static const struct i2c_device_id itg3200_id[] = {
+	{ "itg3200", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, itg3200_id);
+
+static const struct of_device_id itg3200_of_match[] = {
+	{ .compatible = "invensense,itg3200" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, itg3200_of_match);
+
+static struct i2c_driver itg3200_driver = {
+	.driver = {
+		.name	= "itg3200",
+		.of_match_table = itg3200_of_match,
+		.pm	= pm_sleep_ptr(&itg3200_pm_ops),
+	},
+	.id_table	= itg3200_id,
+	.probe_new	= itg3200_probe,
+	.remove		= itg3200_remove,
+};
+
+module_i2c_driver(itg3200_driver);
+
+MODULE_AUTHOR("Christian Strobel <christian.strobel@iis.fraunhofer.de>");
+MODULE_DESCRIPTION("ITG3200 Gyroscope I2C driver");
+MODULE_LICENSE("GPL v2");