Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 474 insertions, 0 deletions

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
new file mode 100644
index 000000000..94b54c501
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -0,0 +1,474 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#ifndef INV_MPU_IIO_H_
+#define INV_MPU_IIO_H_
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/mutex.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/regmap.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/platform_data/invensense_mpu6050.h>
+
+/**
+ *  struct inv_mpu6050_reg_map - Notable registers.
+ *  @sample_rate_div:	Divider applied to gyro output rate.
+ *  @lpf:		Configures internal low pass filter.
+ *  @accel_lpf:		Configures accelerometer low pass filter.
+ *  @user_ctrl:		Enables/resets the FIFO.
+ *  @fifo_en:		Determines which data will appear in FIFO.
+ *  @gyro_config:	gyro config register.
+ *  @accl_config:	accel config register
+ *  @fifo_count_h:	Upper byte of FIFO count.
+ *  @fifo_r_w:		FIFO register.
+ *  @raw_gyro:		Address of first gyro register.
+ *  @raw_accl:		Address of first accel register.
+ *  @temperature:	temperature register
+ *  @int_enable:	Interrupt enable register.
+ *  @int_status:	Interrupt status register.
+ *  @pwr_mgmt_1:	Controls chip's power state and clock source.
+ *  @pwr_mgmt_2:	Controls power state of individual sensors.
+ *  @int_pin_cfg;	Controls interrupt pin configuration.
+ *  @accl_offset:	Controls the accelerometer calibration offset.
+ *  @gyro_offset:	Controls the gyroscope calibration offset.
+ *  @i2c_if:		Controls the i2c interface
+ */
+struct inv_mpu6050_reg_map {
+	u8 sample_rate_div;
+	u8 lpf;
+	u8 accel_lpf;
+	u8 user_ctrl;
+	u8 fifo_en;
+	u8 gyro_config;
+	u8 accl_config;
+	u8 fifo_count_h;
+	u8 fifo_r_w;
+	u8 raw_gyro;
+	u8 raw_accl;
+	u8 temperature;
+	u8 int_enable;
+	u8 int_status;
+	u8 pwr_mgmt_1;
+	u8 pwr_mgmt_2;
+	u8 int_pin_cfg;
+	u8 accl_offset;
+	u8 gyro_offset;
+	u8 i2c_if;
+};
+
+/*device enum */
+enum inv_devices {
+	INV_MPU6050,
+	INV_MPU6500,
+	INV_MPU6515,
+	INV_MPU6880,
+	INV_MPU6000,
+	INV_MPU9150,
+	INV_MPU9250,
+	INV_MPU9255,
+	INV_ICM20608,
+	INV_ICM20608D,
+	INV_ICM20609,
+	INV_ICM20689,
+	INV_ICM20602,
+	INV_ICM20690,
+	INV_IAM20680,
+	INV_NUM_PARTS
+};
+
+/* chip sensors mask: accelerometer, gyroscope, temperature, magnetometer */
+#define INV_MPU6050_SENSOR_ACCL		BIT(0)
+#define INV_MPU6050_SENSOR_GYRO		BIT(1)
+#define INV_MPU6050_SENSOR_TEMP		BIT(2)
+#define INV_MPU6050_SENSOR_MAGN		BIT(3)
+
+/**
+ *  struct inv_mpu6050_chip_config - Cached chip configuration data.
+ *  @clk:		selected chip clock
+ *  @fsr:		Full scale range.
+ *  @lpf:		Digital low pass filter frequency.
+ *  @accl_fs:		accel full scale range.
+ *  @accl_en:		accel engine enabled
+ *  @gyro_en:		gyro engine enabled
+ *  @temp_en:		temperature sensor enabled
+ *  @magn_en:		magn engine (i2c master) enabled
+ *  @accl_fifo_enable:	enable accel data output
+ *  @gyro_fifo_enable:	enable gyro data output
+ *  @temp_fifo_enable:	enable temp data output
+ *  @magn_fifo_enable:	enable magn data output
+ *  @divider:		chip sample rate divider (sample rate divider - 1)
+ */
+struct inv_mpu6050_chip_config {
+	unsigned int clk:3;
+	unsigned int fsr:2;
+	unsigned int lpf:3;
+	unsigned int accl_fs:2;
+	unsigned int accl_en:1;
+	unsigned int gyro_en:1;
+	unsigned int temp_en:1;
+	unsigned int magn_en:1;
+	unsigned int accl_fifo_enable:1;
+	unsigned int gyro_fifo_enable:1;
+	unsigned int temp_fifo_enable:1;
+	unsigned int magn_fifo_enable:1;
+	u8 divider;
+	u8 user_ctrl;
+};
+
+/*
+ * Maximum of 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8.
+ * May be less if fewer channels are enabled, as long as the timestamp
+ * remains 8 byte aligned
+ */
+#define INV_MPU6050_OUTPUT_DATA_SIZE         32
+
+/**
+ *  struct inv_mpu6050_hw - Other important hardware information.
+ *  @whoami:	Self identification byte from WHO_AM_I register
+ *  @name:      name of the chip.
+ *  @reg:   register map of the chip.
+ *  @config:    configuration of the chip.
+ *  @fifo_size:	size of the FIFO in bytes.
+ *  @temp:	offset and scale to apply to raw temperature.
+ */
+struct inv_mpu6050_hw {
+	u8 whoami;
+	u8 *name;
+	const struct inv_mpu6050_reg_map *reg;
+	const struct inv_mpu6050_chip_config *config;
+	size_t fifo_size;
+	struct {
+		int offset;
+		int scale;
+	} temp;
+	struct {
+		unsigned int accel;
+		unsigned int gyro;
+	} startup_time;
+};
+
+/*
+ *  struct inv_mpu6050_state - Driver state variables.
+ *  @lock:              Chip access lock.
+ *  @trig:              IIO trigger.
+ *  @chip_config:	Cached attribute information.
+ *  @reg:		Map of important registers.
+ *  @hw:		Other hardware-specific information.
+ *  @chip_type:		chip type.
+ *  @plat_data:		platform data (deprecated in favor of @orientation).
+ *  @orientation:	sensor chip orientation relative to main hardware.
+ *  @map		regmap pointer.
+ *  @irq		interrupt number.
+ *  @irq_mask		the int_pin_cfg mask to configure interrupt type.
+ *  @chip_period:	chip internal period estimation (~1kHz).
+ *  @it_timestamp:	timestamp from previous interrupt.
+ *  @data_timestamp:	timestamp for next data sample.
+ *  @vdd_supply:	VDD voltage regulator for the chip.
+ *  @vddio_supply	I/O voltage regulator for the chip.
+ *  @magn_disabled:     magnetometer disabled for backward compatibility reason.
+ *  @magn_raw_to_gauss:	coefficient to convert mag raw value to Gauss.
+ *  @magn_orient:       magnetometer sensor chip orientation if available.
+ *  @suspended_sensors:	sensors mask of sensors turned off for suspend
+ *  @data:		dma safe buffer used for bulk reads.
+ */
+struct inv_mpu6050_state {
+	struct mutex lock;
+	struct iio_trigger  *trig;
+	struct inv_mpu6050_chip_config chip_config;
+	const struct inv_mpu6050_reg_map *reg;
+	const struct inv_mpu6050_hw *hw;
+	enum   inv_devices chip_type;
+	struct i2c_mux_core *muxc;
+	struct i2c_client *mux_client;
+	struct inv_mpu6050_platform_data plat_data;
+	struct iio_mount_matrix orientation;
+	struct regmap *map;
+	int irq;
+	u8 irq_mask;
+	unsigned skip_samples;
+	s64 chip_period;
+	s64 it_timestamp;
+	s64 data_timestamp;
+	struct regulator *vdd_supply;
+	struct regulator *vddio_supply;
+	bool magn_disabled;
+	s32 magn_raw_to_gauss[3];
+	struct iio_mount_matrix magn_orient;
+	unsigned int suspended_sensors;
+	u8 data[INV_MPU6050_OUTPUT_DATA_SIZE] __aligned(IIO_DMA_MINALIGN);
+};
+
+/*register and associated bit definition*/
+#define INV_MPU6050_REG_ACCEL_OFFSET        0x06
+#define INV_MPU6050_REG_GYRO_OFFSET         0x13
+
+#define INV_MPU6050_REG_SAMPLE_RATE_DIV     0x19
+#define INV_MPU6050_REG_CONFIG              0x1A
+#define INV_MPU6050_REG_GYRO_CONFIG         0x1B
+#define INV_MPU6050_REG_ACCEL_CONFIG        0x1C
+
+#define INV_MPU6050_REG_FIFO_EN             0x23
+#define INV_MPU6050_BIT_SLAVE_0             0x01
+#define INV_MPU6050_BIT_SLAVE_1             0x02
+#define INV_MPU6050_BIT_SLAVE_2             0x04
+#define INV_MPU6050_BIT_ACCEL_OUT           0x08
+#define INV_MPU6050_BITS_GYRO_OUT           0x70
+#define INV_MPU6050_BIT_TEMP_OUT            0x80
+
+#define INV_MPU6050_REG_I2C_MST_CTRL        0x24
+#define INV_MPU6050_BITS_I2C_MST_CLK_400KHZ 0x0D
+#define INV_MPU6050_BIT_I2C_MST_P_NSR       0x10
+#define INV_MPU6050_BIT_SLV3_FIFO_EN        0x20
+#define INV_MPU6050_BIT_WAIT_FOR_ES         0x40
+#define INV_MPU6050_BIT_MULT_MST_EN         0x80
+
+/* control I2C slaves from 0 to 3 */
+#define INV_MPU6050_REG_I2C_SLV_ADDR(_x)    (0x25 + 3 * (_x))
+#define INV_MPU6050_BIT_I2C_SLV_RNW         0x80
+
+#define INV_MPU6050_REG_I2C_SLV_REG(_x)     (0x26 + 3 * (_x))
+
+#define INV_MPU6050_REG_I2C_SLV_CTRL(_x)    (0x27 + 3 * (_x))
+#define INV_MPU6050_BIT_SLV_GRP             0x10
+#define INV_MPU6050_BIT_SLV_REG_DIS         0x20
+#define INV_MPU6050_BIT_SLV_BYTE_SW         0x40
+#define INV_MPU6050_BIT_SLV_EN              0x80
+
+/* I2C master delay register */
+#define INV_MPU6050_REG_I2C_SLV4_CTRL       0x34
+#define INV_MPU6050_BITS_I2C_MST_DLY(_x)    ((_x) & 0x1F)
+
+#define INV_MPU6050_REG_I2C_MST_STATUS      0x36
+#define INV_MPU6050_BIT_I2C_SLV0_NACK       0x01
+#define INV_MPU6050_BIT_I2C_SLV1_NACK       0x02
+#define INV_MPU6050_BIT_I2C_SLV2_NACK       0x04
+#define INV_MPU6050_BIT_I2C_SLV3_NACK       0x08
+
+#define INV_MPU6050_REG_INT_ENABLE          0x38
+#define INV_MPU6050_BIT_DATA_RDY_EN         0x01
+#define INV_MPU6050_BIT_DMP_INT_EN          0x02
+
+#define INV_MPU6050_REG_RAW_ACCEL           0x3B
+#define INV_MPU6050_REG_TEMPERATURE         0x41
+#define INV_MPU6050_REG_RAW_GYRO            0x43
+
+#define INV_MPU6050_REG_INT_STATUS          0x3A
+#define INV_MPU6050_BIT_FIFO_OVERFLOW_INT   0x10
+#define INV_MPU6050_BIT_RAW_DATA_RDY_INT    0x01
+
+#define INV_MPU6050_REG_EXT_SENS_DATA       0x49
+
+/* I2C slaves data output from 0 to 3 */
+#define INV_MPU6050_REG_I2C_SLV_DO(_x)      (0x63 + (_x))
+
+#define INV_MPU6050_REG_I2C_MST_DELAY_CTRL  0x67
+#define INV_MPU6050_BIT_I2C_SLV0_DLY_EN     0x01
+#define INV_MPU6050_BIT_I2C_SLV1_DLY_EN     0x02
+#define INV_MPU6050_BIT_I2C_SLV2_DLY_EN     0x04
+#define INV_MPU6050_BIT_I2C_SLV3_DLY_EN     0x08
+#define INV_MPU6050_BIT_DELAY_ES_SHADOW     0x80
+
+#define INV_MPU6050_REG_SIGNAL_PATH_RESET   0x68
+#define INV_MPU6050_BIT_TEMP_RST            BIT(0)
+#define INV_MPU6050_BIT_ACCEL_RST           BIT(1)
+#define INV_MPU6050_BIT_GYRO_RST            BIT(2)
+
+#define INV_MPU6050_REG_USER_CTRL           0x6A
+#define INV_MPU6050_BIT_SIG_COND_RST        0x01
+#define INV_MPU6050_BIT_FIFO_RST            0x04
+#define INV_MPU6050_BIT_DMP_RST             0x08
+#define INV_MPU6050_BIT_I2C_MST_EN          0x20
+#define INV_MPU6050_BIT_FIFO_EN             0x40
+#define INV_MPU6050_BIT_DMP_EN              0x80
+#define INV_MPU6050_BIT_I2C_IF_DIS          0x10
+
+#define INV_MPU6050_REG_PWR_MGMT_1          0x6B
+#define INV_MPU6050_BIT_H_RESET             0x80
+#define INV_MPU6050_BIT_SLEEP               0x40
+#define INV_MPU6050_BIT_TEMP_DIS            0x08
+#define INV_MPU6050_BIT_CLK_MASK            0x7
+
+#define INV_MPU6050_REG_PWR_MGMT_2          0x6C
+#define INV_MPU6050_BIT_PWR_ACCL_STBY       0x38
+#define INV_MPU6050_BIT_PWR_GYRO_STBY       0x07
+
+/* ICM20602 register */
+#define INV_ICM20602_REG_I2C_IF             0x70
+#define INV_ICM20602_BIT_I2C_IF_DIS         0x40
+
+#define INV_MPU6050_REG_FIFO_COUNT_H        0x72
+#define INV_MPU6050_REG_FIFO_R_W            0x74
+
+#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR   6
+#define INV_MPU6050_FIFO_COUNT_BYTE          2
+
+/* MPU9X50 9-axis magnetometer */
+#define INV_MPU9X50_BYTES_MAGN               7
+
+/* FIFO temperature sample size */
+#define INV_MPU6050_BYTES_PER_TEMP_SENSOR   2
+
+/* mpu6500 registers */
+#define INV_MPU6500_REG_ACCEL_CONFIG_2      0x1D
+#define INV_ICM20689_BITS_FIFO_SIZE_MAX     0xC0
+#define INV_MPU6500_REG_ACCEL_OFFSET        0x77
+
+/* delay time in milliseconds */
+#define INV_MPU6050_POWER_UP_TIME            100
+#define INV_MPU6050_TEMP_UP_TIME             100
+#define INV_MPU6050_ACCEL_STARTUP_TIME       20
+#define INV_MPU6050_GYRO_STARTUP_TIME        60
+#define INV_MPU6050_GYRO_DOWN_TIME           150
+#define INV_MPU6050_SUSPEND_DELAY_MS         2000
+
+#define INV_MPU6500_GYRO_STARTUP_TIME        70
+#define INV_MPU6500_ACCEL_STARTUP_TIME       30
+
+#define INV_ICM20602_GYRO_STARTUP_TIME       100
+#define INV_ICM20602_ACCEL_STARTUP_TIME      20
+
+#define INV_ICM20690_GYRO_STARTUP_TIME       80
+#define INV_ICM20690_ACCEL_STARTUP_TIME      10
+
+
+/* delay time in microseconds */
+#define INV_MPU6050_REG_UP_TIME_MIN          5000
+#define INV_MPU6050_REG_UP_TIME_MAX          10000
+
+#define INV_MPU6050_TEMP_OFFSET	             12420
+#define INV_MPU6050_TEMP_SCALE               2941176
+#define INV_MPU6050_MAX_GYRO_FS_PARAM        3
+#define INV_MPU6050_MAX_ACCL_FS_PARAM        3
+#define INV_MPU6050_THREE_AXIS               3
+#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT    3
+#define INV_ICM20690_GYRO_CONFIG_FSR_SHIFT   2
+#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT    3
+
+#define INV_MPU6500_TEMP_OFFSET              7011
+#define INV_MPU6500_TEMP_SCALE               2995178
+
+#define INV_ICM20608_TEMP_OFFSET	     8170
+#define INV_ICM20608_TEMP_SCALE		     3059976
+
+#define INV_MPU6050_REG_INT_PIN_CFG	0x37
+#define INV_MPU6050_ACTIVE_HIGH		0x00
+#define INV_MPU6050_ACTIVE_LOW		0x80
+/* enable level triggering */
+#define INV_MPU6050_LATCH_INT_EN	0x20
+#define INV_MPU6050_BIT_BYPASS_EN	0x2
+
+/* Allowed timestamp period jitter in percent */
+#define INV_MPU6050_TS_PERIOD_JITTER	4
+
+/* init parameters */
+#define INV_MPU6050_MAX_FIFO_RATE            1000
+#define INV_MPU6050_MIN_FIFO_RATE            4
+
+/* chip internal frequency: 1KHz */
+#define INV_MPU6050_INTERNAL_FREQ_HZ		1000
+/* return the frequency divider (chip sample rate divider + 1) */
+#define INV_MPU6050_FREQ_DIVIDER(st)					\
+	((st)->chip_config.divider + 1)
+/* chip sample rate divider to fifo rate */
+#define INV_MPU6050_FIFO_RATE_TO_DIVIDER(fifo_rate)			\
+	((INV_MPU6050_INTERNAL_FREQ_HZ / (fifo_rate)) - 1)
+#define INV_MPU6050_DIVIDER_TO_FIFO_RATE(divider)			\
+	(INV_MPU6050_INTERNAL_FREQ_HZ / ((divider) + 1))
+
+#define INV_MPU6050_REG_WHOAMI			117
+
+#define INV_MPU6000_WHOAMI_VALUE		0x68
+#define INV_MPU6050_WHOAMI_VALUE		0x68
+#define INV_MPU6500_WHOAMI_VALUE		0x70
+#define INV_MPU6880_WHOAMI_VALUE		0x78
+#define INV_MPU9150_WHOAMI_VALUE		0x68
+#define INV_MPU9250_WHOAMI_VALUE		0x71
+#define INV_MPU9255_WHOAMI_VALUE		0x73
+#define INV_MPU6515_WHOAMI_VALUE		0x74
+#define INV_ICM20608_WHOAMI_VALUE		0xAF
+#define INV_ICM20608D_WHOAMI_VALUE		0xAE
+#define INV_ICM20609_WHOAMI_VALUE		0xA6
+#define INV_ICM20689_WHOAMI_VALUE		0x98
+#define INV_ICM20602_WHOAMI_VALUE		0x12
+#define INV_ICM20690_WHOAMI_VALUE		0x20
+#define INV_IAM20680_WHOAMI_VALUE		0xA9
+
+/* scan element definition for generic MPU6xxx devices */
+enum inv_mpu6050_scan {
+	INV_MPU6050_SCAN_ACCL_X,
+	INV_MPU6050_SCAN_ACCL_Y,
+	INV_MPU6050_SCAN_ACCL_Z,
+	INV_MPU6050_SCAN_TEMP,
+	INV_MPU6050_SCAN_GYRO_X,
+	INV_MPU6050_SCAN_GYRO_Y,
+	INV_MPU6050_SCAN_GYRO_Z,
+	INV_MPU6050_SCAN_TIMESTAMP,
+
+	INV_MPU9X50_SCAN_MAGN_X = INV_MPU6050_SCAN_GYRO_Z + 1,
+	INV_MPU9X50_SCAN_MAGN_Y,
+	INV_MPU9X50_SCAN_MAGN_Z,
+	INV_MPU9X50_SCAN_TIMESTAMP,
+};
+
+enum inv_mpu6050_filter_e {
+	INV_MPU6050_FILTER_NOLPF2 = 0,
+	INV_MPU6050_FILTER_200HZ,
+	INV_MPU6050_FILTER_100HZ,
+	INV_MPU6050_FILTER_45HZ,
+	INV_MPU6050_FILTER_20HZ,
+	INV_MPU6050_FILTER_10HZ,
+	INV_MPU6050_FILTER_5HZ,
+	INV_MPU6050_FILTER_NOLPF,
+	NUM_MPU6050_FILTER
+};
+
+/* IIO attribute address */
+enum INV_MPU6050_IIO_ATTR_ADDR {
+	ATTR_GYRO_MATRIX,
+	ATTR_ACCL_MATRIX,
+};
+
+enum inv_mpu6050_accl_fs_e {
+	INV_MPU6050_FS_02G = 0,
+	INV_MPU6050_FS_04G,
+	INV_MPU6050_FS_08G,
+	INV_MPU6050_FS_16G,
+	NUM_ACCL_FSR
+};
+
+enum inv_mpu6050_fsr_e {
+	INV_MPU6050_FSR_250DPS = 0,
+	INV_MPU6050_FSR_500DPS,
+	INV_MPU6050_FSR_1000DPS,
+	INV_MPU6050_FSR_2000DPS,
+	NUM_MPU6050_FSR
+};
+
+enum inv_mpu6050_clock_sel_e {
+	INV_CLK_INTERNAL = 0,
+	INV_CLK_PLL,
+	NUM_CLK
+};
+
+irqreturn_t inv_mpu6050_read_fifo(int irq, void *p);
+int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type);
+int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable);
+int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en,
+			      unsigned int mask);
+int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client);
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client);
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
+		int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type);
+extern const struct dev_pm_ops inv_mpu_pmops;
+
+#endif